Featuring an integrated seal that’s pre-assembled into the cups, SRAM’s PressFit 30 bottom bracket is designed to keep out dirt and water that could cause increased wear and tear. Simple to fit, it is designed for road and mountain bike (MTB) frames with bottom bracket shells with a 46mm inner diameter and cranksets with 30mm diameters. The key difference with PressFit 30 is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. This bottom bracket is designed for 30mm spindle cranksets. Frames will need a 46mm inner diameter bottom bracket shell to accommodate this system. PressFit 30 for road will require a 68mm wide shell while PressFit 30 for MTB will require a 73mm wide shell. When designing the SRAM PressFit 30 bottom bracket, the brand set out with the aim of combining the best of BB30 technologies with the best features of the Pressfit standard. The result of this is a sealed 30mm bearing system with superior bearing life. Manufacturer's Part Number: 00.6418.009.000
Utilising SRAM's Dub bottom bracket technology, this BB has a 28.99mm crankset spindle/inner bearing diameter and benefits from BB30 lightweight bearings and strong crank spindle for an efficient, integrated drivetrain performance. As durable as SRAM's 24mm bottom bracket systems, this model allows for a low-maintenance, high performance rotation of your crankset.
Pressfit BB to convert PF30 to BSA threaded
Gutter Seal Technology drastically improves sealing against the elements while reducing seal drag. SRAM also designed a fresh cup forging for a high-end look. The SRAM GXP team bottom bracket sets a new standard in external bearing performance. Technologies: GXP: Giga X Pipe External Bottom Bracket Bearing Assembly. While other systems rely on side loading the bearings to eliminate play, which causes premature bearing wear, the GXP system is different. The GXP system captures the left side bearing between the spindle and the left crank arm while allowing the drive-side bearing to float axially on the spindle, thereby eliminating the necessity to side-load bearings during adjustment. The simplicity of installation is refined: once it is tightened to the proper specifications you are ready to roll with a worry free BB. The GXP system uses two bicycle specific cartridge bearings and eight seals for a smooth and long-lasting ride.
A variant of the external bottom bracket, this SRAM BB86 GXP PressFit bottom bracket cuts weight and provides easier installation by allowing you to press the bearing cups into the frame instead of threading them. There's no change to the crank - spindle length and diameter remain the same. Technologies: GXP: Other systems rely on side-loaded bearings to eliminate play, causing bearing wear. GXP captures the left-side bearing between the spindle and the left crankarm and allows the drive-side bearing to float axially on the spindle. There's no need to side-load bearings during adjustment. No excess wear and much simpler installation. Just tighten to the proper specifications and you're ready to roll, worry-free. GXP's two bicycle-specific cartridge bearings and eight seals ensure a smooth, long-lasting ride. SRAM's Gutter seal system takes a two-stage approach in directing contaminates away from the bearings providing longer bearing life. GXP’s Gutter Seal design also reduces friction, 35% less drag than previous versions, improving rider feel and performance. Gutter seal system has deeper installation tool grooves which provide stability and support while applying torque to the adapter cups. SRAM'S design and material choice have dropped 15g out. PressFit cuts weight. Easier installation by allowing you to press the bearing cups into the frame. GXP compatible. Easy installation. ISO 4210 compliant. See Declaration of Conformity for details. Manufacturer's Part Number: 00.6415.033.020 Black 92mm - MTB Hollowtech Eng 00.6415.033.000 Black BB86 - Road
With high-quality technology at its heart, this superb component creates the ultimate in stiffness, reliability and performance without sacrificing weight. Featuring SRAM's renowned DUB system, this model reaps the benefits of lightweight bearings and a robust oversized crank spindle. Thanks to its new standard for drivetrain performance, easy adjustability and reliability, you can enjoy the highest levels of performance, without the need to spend hours in your workshop or garage making adjustments.
With high-quality technology at its heart, this superb component creates the ultimate in stiffness, reliability and performance without sacrificing weight. Featuring SRAM's renowned DUB system, this model reaps the benefits of BB30A lightweight bearings and a robust oversized crank spindle. Thanks to its new standard for drivetrain performance, adjustability and reliability, you can enjoy the highest levels of performance, without the need to spend hours in your workshop or garage.
Kitted out with fully sealed cartridge bearings, this impressive bottom bracket lets you pedal with reliability, providing a supportive and steady hold as your crankset rotates freely. Attaching by its simple PressFit design, this is an excellent minimum effort, high-performance BB for the avid road rider.
A genuine SRAM BB30 bearings kit. BB30-named for its required spindle size-narrows Q-factor, increases ankle clearance, and ups bearing durability. Along with a 30mm spindle, it requires an oversized 68mm or 73mm bottom bracket shell and PressFit bearings held in place by snap rings. Includes two alloy bearings, black caps, silver spacers and washers. Technologies: - 30mm alloy spindle. - Larger bearings for longer life. - 40x30x7 larger bearing size. Manufacturer's Part Number: 00.6415.035.000
With their new DUB cranksets and bottom bracket standards, SRAM have upped their game, with the two products combining to create a lighter, stiffer and more durable system. SRAM's DUB Press Fit Bottom Bracket fits in your standard 41mm ID press fit bottom shell and provides a stiffer and more durable bottom bracket compared to the competition and SRAM's own GXP design. By using a 28.99mm axle, the DUB bottom bracket offers bigger bearings than bottom brackets used for 30mm crank axles, improving durability and stiffness, as well as being lighter. The DUB system replaces SRAM's previous GXP and BB30 crank and bottom bracket systems to provide improved durability, better compatibility and a stiffer, stronger and lighter product. DUB cranks can be used with any existing bottom bracket standard when used with the appropriate DUB bottom bracket. Performance benefits aside, it also means your crank is future proofed in case you happen to swap your frame. Easy to install and highly durable, SRAM's DUB Press Fit Bottom Bracket sets a new standard in durability and longevity.
With their new DUB cranksets and bottom bracket standards, SRAM have upped their game, with the two products combining to create a lighter, stiffer and more durable system. SRAM's DUB PF30 Bottom Bracket fits in your standard PF30 bottom shell and provides a stiffer and more durable bottom bracket compared to the competition and SRAM's own GXP design. By using a 28.99mm axle, the DUB bottom bracket offers bigger bearings than bottom brackets used for 30mm crank axles, improving durability and stiffness, as well as being lighter. The DUB system replaces SRAM's previous GXP and BB30 crank and bottom bracket systems to provide improved durability, better compatibility and a stiffer, stronger and lighter product. DUB cranks can be used with any existing bottom bracket standard when used with the appropriate DUB bottom bracket. Performance benefits aside, it also means your crank is future proofed in case you happen to swap your frame. Easy to install and highly durable, SRAM's DUB PF30 Bottom Bracket sets a new standard in durability and longevity.
The SRAM GXP Team bottom bracket is designed for both SRAM mountain bike and road drivetrains, delivering flawless performance at an inexpensive price. The cartridge bearings use gutter seal technology to keep the elements out and the grease in for significantly increased longevity over previous incarnations. SRAM's new Gutter Seal system takes a two stage approach in directing contaminates away from the bearings providing longer bearing life. GXP s Gutter Seal design also reduces friction, 35% less drag than the current GXP BB, improving rider feel and performance. Gutter Seal system has deeper installation tool grooves which provide stability and support while applying torque to the adapter cups.