End caps and spares for our Halo MT Front (formally called Spin Doctor 6F) and FAT Front hubs
Halo Retro road rim built onto a SP PV-8 Dynamo HubSpecificationsRims: Halo Retro,Hubs: SP Dynamo PV8,Front Hub Spacing: 100mm,Drillings: 32H,Spoke Pattern: 3 Cross,Colour: Silver.
Our Carbaura RC wheelsets have been designed to keep you one step ahead of the competition.Built around an optimized, Computational Fluid Dynamics tested, aerodynamic profile in a Carbon Fibre chassis, low weights, linear compliance and lateral stiffness were our primary aims with the Carbaura RC wheelsets.The tried and tested 19mm internal and 25mm external rim widths allow you to run a choice of traditional or tubeless tyres and are well suited to tyres ranging from 25c through to 35c widths to deliver enhanced comfort and grip.To improve braking performance and rim durability on tough alpine descents, the braking surface has been finished in a 1.5k weave to dissipate heat throughout the carbon structure faster to dramatically reduce temperature build up.Hand crafted with lightweight bladed aero spokes to decrease resistance and widely spaced hub flanges the Carbaura RC wheelsets have been built to reduce any possible lateral flex and increase power transfer. The rear wheels uses a 16/8e lacing pattern to balance spoke tensions and withstand torque forces from centre of the wheel whilst the front wheel uses radical lacing to reduce weight and drag.Our RS Front and RS 6Drive hubs use fully sealed EZO bearings for year round longevity. The RS 6Drive hub uses 6 individually sprung reversed pawls, mounted into the hub shell, that simultaneously engage into the 30-point freehub driver for positive torque transfer.Available in two depths, 35mm, a lower inertia option great for undulating courses, and 50mm, a more aerodynamic option for flatter routes.Included FittingsFront: 100 x 9mm QR,Rear: 130 x 9mm QR.SpecificationsSpokes: Halo Black Aero Racing Stainless spokes ,Nipples: Halo Red Alloy nipples ,Rim Depth: 30 or 50mm,Internal Width: 19mm,External Width: 25mm,Front Hub Spacing: 100mm,Rear spacing: 130mm,Drillings: 20H Front, 24H Rear,Freehub: Shimano HG and Campagnolo versions,Drive System: 6Drive,Freehub Body: Alloy,Spoke pattern: Radial Front, 16/8e Rear,Recommended Tyre size: 25-35c,Colour: Raw UD/1.5k Carbon.
HUHAZSVA2H - 12mm thru Shimano HG Cassette. 142, 148 and 157mm O.L.D.HUHAZSVA2X - 12mm thru SRAM XD Cassette. 142, 148 and 157mm O.L.D.HUHAZSVADH - 12mm thru Shimano HG Cassette. 135 and 150mm O.L.D.HUHAZSVADX - 12mm thru SRAM XD Cassette. 135 and 150mm O.L.D.HUHAZSVAQH - QR, Shimano HG Cassette. 135 or 141mm O.L.D.HUHAZSVAQX - QR, SRAM XD Cassette. 135 or 141mm O.L.D.
The Vapour GXC wheelset is the lightest in the Vapour range. Crafted for the longest distance gravel races, ultra-distance adventure riding, XC racing, road plus as well as lightly loaded touring.Built with a 21mm internal width rim the Vapour GXC wheel is ideal for a gravel, road plus and narrower MTB tyres.As well as a lightweight and dependable rim, the Vapour GXC wheels utilise our all new GXC hubs specifically designed for this wheelset. The GXC hubs feature instantaneous 120 point engagement, centre lock, sealed bearings and wide spaced flanges for increased stiffness and durability.We have used non-proprietary J-bend spokes to ensure should the worst happen, you have a great chance of being able to fix your wheel and carry on your adventure.Supplied pre-taped the Vapour GXC is tubeless ready from the box.SpecificationsRims: Vapour,Hubs: GXC Supadrive ,Rim Depth: 22.5mm,Internal Width: 21mm,External Width: 26mm,Front Hub Spacing: 100mm qr and 15mm Thru included (12mm thru adaptor available aftermarket),Rear Spacing: 135 x QR5/10mm and 142 x 12mm Cr-mo tube thru axle,Drillings: 28H front, 32H rear,Disc Mount: Centerlock (optional 6 bolt adaptor available aftermarket).
Extra long Brass nipples, for that extra security, or occasionally when the spokes selected are marginally short. 14g x 5/8" (16mm) , Black or Silver .
Self adhesive, high pressure tubeless rim tape.2 x 5.5m rolls (enough for 2 wheels) or 100 Metre workshop rolls.Available in 22, 34 or 46mm widths.
The T2 is our middle weight multi-purpose mountain bike rim.Featuring a strong box section with T-10 heat treated material the T2 can be used with Disc or V- Brakes for a range of riding applications.SpecificationsMaterial: T-10 Heat treated alloy,Internal Width: 26mm,External Width: 32mm,Rim Depth: 21.5mm,Joint type: Sleeved,Recommended Tyre Size: 1.95-2.5” (2.25” recommended),Drillings: 32 or 36H,Eyelets: Stainless Steel.
These simple products allows almost any 12x100mm & 15x100mm T-axle front hub to run with standard quick release axle forks.CNC machined 7075 alloy tube,Anodised finish. .
Our MT series hubs are our flagship mountain bike hub range. The MT series encompass everything we feel hubs for mountain biking should offer.Durability, modularity and light weights make the MT Series a simple choice.Suited best to XC, trail and enduro bikes alike, the MT Supadrive hub offers a 120 point near instant engagement with the ability to withstand substantial torque loads, such as those found with wide range cassettes. With multiple World Championship titles across a range of disciplines the Supadrive system is tried and tested to the very highest level and is our most advanced and reliable drive system to date.Wide spoke flanges, sealed cartridge bearings and a Cr-Mo tube axle in the MT Supadrive hub ensure longevity.Designed to be run with mountain bike gearing, the MT Supadrive hub features an XD driver or alternatively a MTB width HG freehubSpecifications:Material: 6061 Alloy forged hub shell,Drillings: 32H,Bearings: 2 x 6902 (hub) 3 x 6802 (SRAM Freehub) or 1 x 6902 and 6802 (HG Freehub),Axle: 12 x 148mm thru-axle,Disc Mount: IS 6-Bolt,Freehub: 120 teeth triple-wedge pawl mechanism,Freehub Body: Shimano HG or Sram XD,Dimensions: C-R 25mm, C-L 37mm, flange 58mm,Colour: Black.
Replacement freehub for WL rear disc hub.HG 11 speed alloy 3 pawl freehub.
Built around the traverses of the Enduro World Series our Vortex wheels redefine what Enduro wheels are.With a generous 33mm internal width Vortex wheels increase tyre volume and maximise the available grip on offer. Using an asymmetric design we have equalised spoke tensions and built a package that leaves descents in its wake, whilst cutting down weight where it isn’t needed for energy sapping climbs. To compensate for the differences in wall length and strength of an asymmetric design, the wall thicknesses have been proportioned to balance out impact forces equally. The Vortex offers offset wheel benefits, without compromise.At the core of our Vortex wheels are our new and improved instantaneous 120 point pick up MT Supadrive and MT Front hubs, with sealed bearings and super wide spaced flanges for increased stiffness and durability.100% hand built and pre fitted with tubeless tape, Vortex wheels are tubeless ready from the box.Coloured decal kits available aftermarket.Included Fittings:Front Standard: 100 x 15mm thru, 100 x 9mm QR,Front Boost: 110 x 15mm thru,Rear Standard: 142 x 12mm thru, 135 x 9mm QR,Rear Boost: 148 x 12mm thru,Rear Super Boost: 157 x 12mm thru.Specifications:Spokes: Black double butted stainless spokes,Nipples: Black ED coated brass nipples,Rim Depth: 20.75mm,Internal Width: 33mm,External Width: 38mm,Front Hub Spacing: 100mm or 110mm Boost,Rear Spacing: 135/142mm or 148mm Boost versions,Rim Joint Type: Sleeved,Drillings: 32H,Hub Type: Disc Hub,Freehub: Shimano HG or SRAM XD versions,Drive System: Supadrive,Freehub Body: Alloy,Disc Mount: 6 Bolt,Spoke pattern: 3X,Recommended Tyre Size: 2.35-2.8,Colour: Stealth Black.
Built around the traverses of the Enduro World Series our Vortex wheels redefine what Enduro wheels are.With a generous 33mm internal width Vortex wheels increase tyre volume and maximise the available grip on offer. Using an asymmetric design we have equalised spoke tensions and built a package that leaves descents in its wake, whilst cutting down weight where it isn’t needed for energy sapping climbs. To compensate for the differences in wall length and strength of an asymmetric design, the wall thicknesses have been proportioned to balance out impact forces equally. The Vortex offers offset wheel benefits, without compromise.At the core of our Vortex wheels are our new and improved instantaneous 120 point pick up MT Supadrive and MT Front hubs, with sealed bearings and super wide spaced flanges for increased stiffness and durability.100% hand built and pre fitted with tubeless tape, Vortex wheels are tubeless ready from the box.Coloured decal kits available aftermarket.Included Fittings:Front Standard: 100 x 15mm thru, 100 x 9mm QR,Front Boost: 110 x 15mm thru,Rear Standard: 142 x 12mm thru, 135 x 9mm QR,Rear Boost: 148 x 12mm thru,Rear Super Boost: 157 x 12mm thru.Specifications:Spokes: Black double butted stainless spokes,Nipples: Black brass,Rim Depth: 20.75mm,Internal Width: 33mm,External Width: 38mm,Front Hub Spacing: 100mm or 110mm Boost,Rear Spacing: 135/142mm or 148mm Boost,Rim Joint Type: Sleeved,Drillings: 32H,Hub Type: Disc Hub,Freehub: Shimano HG or SRAM XD versions,Drive System: Supadrive,Freehub Body: Alloy,Disc Mount: 6 Bolt,Spoke Pattern: 3X,Recommended Tyre Size: 2.35-2.8",Colour: Stealth Black.
Make it yours. Our Vortex Decal kits come in 6 colours to customise your 27.5” or 29” Vortex wheels to match your style.Each pack of decals contains enough for a pair of wheels, with 24 individual decals.
With a generous 33mm internal width Vortex wheels increase tyre volume and maximise the available grip on offer.Using an asymmetric design we have equalised spoke tensions and built a package that leaves descents in its wake, whilst cutting down weight where it isn’t needed for energy sapping climbs.To compensate for the differences in wall length and strength of an asymmetric design, the wall thicknesses have been proportioned to balance out impact forces equally.The Vortex offers offset wheel benefits, without compromise.SpecificationsInternal Width: 33mm,External Width: 38mm,Rim Depth: 20.75mm,Joint type: Sleeved,Recommended Tyre size: 2.35-2.8,Drillings: 32H,Eyelets: Single black SS,ERD: 558mm (27.5"), 595mm (29"),Colour: Stealth Black.Offset disc alloy rim. Disc ONLY with SS eyelets.
Halo Vapour 29 Wheels :Lightweight XC/Trail wheels..Tubeless ready Vapour rims on superlight high performance Halo sealed bearing hubs laced with double butted spokes and precision CNC 7075 Halo alloy nipples..26mm width double wall rims with stainless steel eyelets. Deep section T10 heat treated Niobium alloy with eye-catching graphics..Front: XCD hub - 9mm QR axle..Rear: Supadrive hub - with 120 point pick-up rear cassette hub with QR10mm axle as standard. (optional extra axle T-axle kits in 12 x 135 or 12 x142mm.).Factory built wheel colour options :Black: Black rim, Red hub, Black spokes and Red nipples Silver: Polished rim & hub, Stainless spokes and Red nipples..29" Black or Silver..Weights :Front: 822g, Rear: 969g..Tubeless-ready rims have revised tyre bead hook/rim well and can be used with normal inner tubes & tyres OR with tubeless conversion tape systems..We've just started testing these light and lively wheels and first impressions are excellent - WMB.
Replacement axles and axle spares for the Halo MT Supadrive hub. The Halo MT hub can be run as a QR 9x135mm set up or 12 x142mm through axle. Utilising heat treated Cro-mo Steel the MT Supadrive axle reduces flex and increases power transfer, and is available in Shimano HG or Sram XD variations (to match your applicable cassette).
Aerotrack 700c WheelsUsing the outstanding Halo (120mm width) track hubs and built using 32 plain 14 gauge spokes combined with the Halo Aerotrack Mid size Aero road rim.,Light and strong with an attractive mid size 27mm Aero section..One front and many rear options.Weights:Front - 900g,Rear - 956g.Aerotrack Fix-G Wheels:Featuring Halo's ever popular Aerotrack 700c rims laced to the Fix-G HG-splined fixed hub.,Innovation meets reliability in the form of these 700c, 120mm spaced rear wheels.,Available in White powder coated, Silver or Black, with Fix-G/Freewheel or Fix-G/Fixed hub options..Halo Fix-G Track Hub:An ever present headache with normal fixed hubs is the assembly of a drive cog that is attached by a thread being pulled in both directions by the pedal torque. Of course, the traditional solution to avoiding the cog unwinding itself from the hub in the reverse direction is a left hand threaded lock-ring, butted up tight against the cog. But, as many riders have found out, this historic system can be relatively volatile.Halo thought... there has to be a better way:A splined hub body (with cogs that slide on) and an independent lock-ring that never has to handle rotational forces from the drive..Halo Fix-G hub:The Halo Fix-G hub features a fixed HG spline, machined as part of the alloy main hub body*, with a conventional internal thread for a standard HG type lock-ring (with easy tool fittings). Options available for the left hand side include conventional fixed or freewheel threads..*Note: Must ONLY ever be used with 7mm base 'Wide Foot' cogs such as Gusset 'Double Six' cogs to avoid the cog biting into the alloy splines on the hub. Regular width HG cogs should NEVER be used.Halo Fix-G advantages:Easy and secure fixing & servicing.,Adjustable chain-line.,Twin cog option (can run 2 cogs together.),Accepts from 12T + cogs (for compact gearing).,No need for chain-whip tools..Tech features:Hi-polish custom CNC machined hub shell,,HG type fixed spline.,Japanese sealed bearings.,Hollow M10 Cr-Mo axle.,120mm spacing.,22mm "Large cone-faces" to avoid damage to frame. ,includes cog spacers and alloy lock-ring.,Front Axle Thread 9x1.,Rear Axle Thread 10x1.,Laser logo. 32H, 36H or 48H,HG Fixed/Fixed or HG Fixed/Freewheel types.."The Fix-g hub is great! it runs smoothly as the previous Halo hub but the fact that you can move the sprocket for a perfect chain-line is great and you can feel the difference straight away. Also, it's really easy to do, everyone can do it without a mechanic's help, I think you should advertise this and make it clear for everyone, people don't have to be scared of a new technology"Ivan Fiorilla - 5th Floor riding club - London. The5thfloor.co.ukImportant note regarding threads for fixed sprocket lock-rings:Our hubs must only be used with ISO standard 1.29" x 24TPi L/H fixed cog lock-rings.,Do NOT USE French (1.32" x 24TPi) or Italian (33 x 1mm) standard lock-rings.,The larger diameter French and Italian lock-rings may appear to work but will strip the threads from the ISO hub..Note: General Fixed sprocket check.For correct fixed use, the fixed sprocket should NEVER move on the hub when pedal force is applied in both directions. If the sprocket moves, then something is wrong and continued use with a fixedsprocket that moves will result in damage to the hub..
A slightly deeper section sister product to the well established Aerorage.The Aerotrack is a great option for those chasing after a light, strong road/track rim with an all-over colour finish (i.e. without a machined finish braking surface.),A perfect choice for those riders who want a super clean aero rim and no rim brakes..Note:Anodised colour Aerotrack rims can also be used with a rim brake, as the braking surface is machined before colouring. However the colour will - of course wear..NOTE:Rim brakes should NOT be used on the Paint and Powder coated colour finishes. If a coloured rim brake option is required, we would recommend the Aerorage rim featuring it's machine finished brake surface..SpecificationsMaterial T-10 heat treated alloy,Drillings 32H,ERD 585mm,Colour Black anodised, white powder coated or silver polished,Dimensions 19.4mm wide (13.9mm internal), 27mm deep,Weight 435g.