The Service Course stem delivers all you look for in a stem—strength stiffness reliability a precise fit and distinctive look. The Service Course stem offers a faceplate and body design for greater stiffness and easier installation. It’s high performance and high value. The Service Course stem’s shape and 3D-forged construction results in an improved stiffness-to-weight-ratio. The stem design along with distinctive graphics also complement the aesthetics of modern frames. Made from 6061 aluminum the stem resists flexing during sprints and accelerations. FEATURES Faceplace and body geometry designed for greater stiffness and easier installation Two cosmetic options bead-blast black or distinctive silver ±6° and ±25° rise stem available Leading stiffness-to-weight Secure with four bolt faceplate using Torx® T25 bolt heads Zipp QuickView integrated mount available separately Lifetime warranty SPECIFICATIONS STEM ANGLE/RISE 25 degrees 6 degrees LENGTH (ST) 100mm 105mm 110mm 120mm 130mm 60mm 70mm 75mm 80mm 90mm CLAMP DIAM 31.8mm STEERER CLAMP DIAMETER 1-1/8 in COLOR/FINISH (ST) Blast Black Bright Silver MATERIAL (SP/ST) Al-6061 HARDWARE Steel FACE PLATE BOLT DISTANCE-HORIZONTAL 27mm FACE PLATE BOLT DISTANCE-VERTICAL 42mm
The Service Course stem delivers all you look for in a stem—strength stiffness reliability a precise fit and distinctive look. The Service Course stem offers a faceplate and body design for greater stiffness and easier installation. It’s high performance and high value. The Service Course stem’s shape and 3D-forged construction results in an improved stiffness-to-weight-ratio. The stem design along with distinctive graphics also complement the aesthetics of modern frames. Made from 6061 aluminum the stem resists flexing during sprints and accelerations. FEATURES Faceplace and body geometry designed for greater stiffness and easier installation Two cosmetic options bead-blast black or distinctive silver ±6° and ±25° rise stem available Leading stiffness-to-weight Secure with four bolt faceplate using Torx® T25 bolt heads Zipp QuickView integrated mount available separately Lifetime warranty SPECIFICATIONS STEM ANGLE/RISE 25 degrees 6 degrees LENGTH (ST) 100mm 105mm 110mm 120mm 130mm 60mm 70mm 75mm 80mm 90mm CLAMP DIAM 31.8mm STEERER CLAMP DIAMETER 1-1/8 in COLOR/FINISH (ST) Blast Black Bright Silver MATERIAL (SP/ST) Al-6061 HARDWARE Steel FACE PLATE BOLT DISTANCE-HORIZONTAL 27mm FACE PLATE BOLT DISTANCE-VERTICAL 42mm
Zipp’s Service Course SL Stem crafted from 7075 aluminum features a shape that’s strong and lightweight resulting in a best-in-class 1.85 grams per newton meter of stiffness. That results in no-flex sprints and accelerations. To meet every rider’s fit needs the stem is available in ±6° and ±17° angles and seven lengths from 70 to 130mm as well as a 140 & 150mm lengths for the ±6° stem only. This stem is a favorite of Zipp ambassadors and pro athletes. FEATURES Distinctive Zipp cosmetics Wide range of sizes and angles. Matte Black nano blast aluminum Lifetime warranty Zipp Quickview integrated computer mount available separately SPECIFICATIONS STEM ANGLE/RISE 17 degrees 6 degrees LENGTH (ST) 100mm 110mm 120mm 130mm 140mm 150mm 70mm 80mm 90mm CLAMP DIAM 31.8mm STEERER CLAMP DIAMETER 1-1/8 in COLOR/FINISH (ST) Matte with stealth decals MATERIAL (SP/ST) Al-7075 HARDWARE Titanium FACE PLATE BOLT DISTANCE-HORIZONTAL 27mm FACE PLATE BOLT DISTANCE-VERTICAL 42mm
Zipp’s Service Course SL Stem crafted from 7075 aluminum features a shape that’s strong and lightweight resulting in a best-in-class 1.85 grams per newton meter of stiffness. That results in no-flex sprints and accelerations. To meet every rider’s fit needs the stem is available in ±6° and ±17° angles and seven lengths from 70 to 130mm as well as a 140 & 150mm lengths for the ±6° stem only. This stem is a favorite of Zipp ambassadors and pro athletes. FEATURES Distinctive Zipp cosmetics Wide range of sizes and angles. Service Course SL OS stem made for 1-1/8” steerer tube bikes. Matte Black nano blast aluminum Lifetime warranty Zipp Quickview integrated computer mount available separately SPECIFICATIONS STEM ANGLE/RISE 17 degrees 6 degrees LENGTH (ST) 100mm 110mm 120mm 130mm 140mm 150mm 70mm 80mm 90mm CLAMP DIAM 31.8mm STEERER CLAMP DIAMETER 1-1/8 in COLOR/FINISH (ST) Matte with stealth decals MATERIAL (SP/ST) Al-7075 HARDWARE Titanium FACE PLATE BOLT DISTANCE-HORIZONTAL 27mm FACE PLATE BOLT DISTANCE-VERTICAL 42mm
Zipp’s Service Course SL Stem crafted from 7075 aluminum features a shape that’s strong and lightweight resulting in a best-in-class 1.85 grams per newton meter of stiffness. That results in no-flex sprints and accelerations. To meet every rider’s fit needs the stem is available in ±6° and ±17° angles and seven lengths from 70 to 130mm as well as a 140 & 150mm lengths for the ±6° stem only. This stem is a favorite of Zipp ambassadors and pro athletes. *SIZES 70MM80MM90MM130MM ARE MANUFACTURED TO ORDER BY ZIPP AND WILL TAKE UP TO 5 MONTHS AS PER SUPPLIER* FEATURES Distinctive Zipp cosmetics Wide range of sizes and angles. Service Course SL OS stem made for 1-1/4” steerer tube bikes. Matte Black nano blast aluminum Lifetime warranty Zipp Quickview integrated computer mount available separately SPECIFICATIONS STEM ANGLE/RISE 17 degrees 6 degrees LENGTH (ST) 100mm 110mm 120mm 130mm 140mm 150mm 70mm 80mm 90mm CLAMP DIAM 31.8mm STEERER CLAMP DIAMETER 1.125/1.25 1-1/8 in COLOR/FINISH (ST) Matte with stealth decals MATERIAL (SP/ST) Al-7075 HARDWARE Titanium FACE PLATE BOLT DISTANCE-HORIZONTAL 27mm FACE PLATE BOLT DISTANCE-VERTICAL 42mm
Zipp’s SL Speed stem represents the essence of carbon componentry. It’s stiff secure and light weight with a sleek design that compliments any bike. It’s a perfect addition to a mountain climber’s favorite feather-light road bike but it’s tough enough to tackle gravel and cyclocross. Designed using SRAM Exogram™ technology found in SRAM RED cranks the new SL Speed Stem weighs just 123g (100mm) while exceeding our stiffness-to-weight standards. The SL Speed is available in six sizes ranging from 70 to 120mm to meet any rider’s fit needs. Includes stiff aluminum faceplate and titanium hardware Torx® T25 heads for precise torque readings and ease of adjustment. *SIZE 70MM IS MANUFACTURED TO ORDER BY ZIPP AND WILL TAKE UP TO 5 MONTHS AS PER SUPPLIER* FEATURES Updated distinctive Zipp cosmetics Designed using SRAM Exogram™ technology New SL Speed Stem weighs just 123g (100mm) ±6° carbon stem Secure with four bolt faceplace using Torx© T25 bolt heads Matte Black finish Lifetime warranty Zipp Quickview integrated mount available separately SPECIFICATIONS STEM ANGLE/RISE 6 degrees LENGTH (ST) 100mm 110mm 120mm 70mm 80mm 90mm CLAMP DIAM 31.8mm STEERER CLAMP DIAMETER 1-1/8 in COLOR/FINISH (ST) Natural carbon MATERIAL (SP/ST) Unidirectional Carbon HARDWARE Titanium FACE PLATE BOLT DISTANCE-HORIZONTAL 27mm FACE PLATE BOLT DISTANCE-VERTICAL 42mm
Zipp’s Service Course seatpost is light weight and strong for security and designed to offer a precise fit at an affordable price. It also provides easy tool access to the downward facing bolt for easy setup and micro adjustments after it’s mounted. Better fit means better performance to make you faster. An out-of-position saddle means wasted energy with every pedal stroke. The secure low-profile clamp allows the saddle to slide farther back along the rails and with 0 and 20mm setback options it’s possible for nearly any rider to achieve the perfect fit. For high strength low weight and efficient use of every gram the shaft and head are not bonded but are 3D-forged from 6061 aluminum. The Service Course seatpost is 350mm in length. FEATURES Two cosmetic options bead-blast black or distinctive silver 2-bolt adjustability 3D-forged from 6061 aluminum Fits all common saddle rail types Lifetime warranty SPECIFICATIONS POST DIAMETER 27.2mm 31.6mm OFFSET/SETBACK 0mm 20mm POST LENGTH 350mm COLOR (SP) Blast Black Bright Silver MATERIAL (SP/ST) Al-6061 HARDWARE Steel CLAMP MATERIAL Al-6061
Zipp’s SL Speed Seatpost has become a favorite of road and cyclocross pros because of its light weight and dependability. Zipp’s engineers used SRAM’s Exogram technology to make the tube as lightweight as possible and optimized our clamping system for adjustability security and ease of use. What’s more the SL Speed is available in a 400mm length to accommodate road bikes with compact frame geometry. SL Speed carbon seatpost is available in 0mm or 20mm setback options. FEATURES Updated distinctive Zipp cosmetics Designed using SRAM Exogram™ technology 27.2 and 31.6mm in 400mm length Also available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano® DI2 seatpost battery within the SL Speed Seatpost Mount sold separately as an accessory. Matte Black finish Lifetime warranty SPECIFICATIONS POST DIAMETER 27.2mm 31.6mm OFFSET/SETBACK 0mm 20mm POST LENGTH 400mm COLOR (SP) Matte with stealth decals MATERIAL (SP/ST) Unidirectional Carbon HARDWARE Steel CLAMP MATERIAL Al-6061
Zipp Service Course 80 Ergo handlebar is all about making you faster in style and comfort. It features an ergonomic flat top. The drop shape features an 80mm reach and 125mm drop perfect for a rider looking for a medium reach and shallow drop who likes reaching down to rather than into the drops. The bars feature a 7° ramp angle for a flat transition to the hoods and a 4° outsweep at the drops. In addition to the ergonomic benefits the Service Course 80 Ergo are our first ergo bars to be clip-on compatible. The Service Course 80 Ergo bar uses 6061 aluminum to tip the scales at 315g for a 42cm-wide bar. FEATURES Two cosmetic options bead-blast black or distinctive silver 6061 aluminum for light weight and durability 80mm reach and 125mm drop for a medium-high position Flattened top shape with 3° backsweep for wrist comfort Clip-on compatible (40 42 44cm sizes only) Di2® RS910 junction compatible Lifetime warranty SPECIFICATIONS MATERIAL (HB) AL-6061 CLAMP DIAM 31.8mm CLIP COMPATIBLE No Yes WIDTH (CENTER-TO-CENTER) 38cm 40cm 42cm 44cm REACH (HB) 80mm DROP (HB) 125mm RAMP ANGLE 7° OUTSWEEP 4° FINISH (HB) Bead Blast Black Bright Silver
This is Zipp’s innovative all-road handlebar the Service Course SL 70 XPLR. The bar’s moniker XPLR exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle… from paved roads onto gravel mud dirt and even single track. The Service Course SL 70 XPLR help you go faster by placing your body starting with your hands in an optimal “comfort zone” position for hours of rough riding over mixed terrain. Today’s riders demand a few things out of their cockpit whether they are doing a two-hour training ride from home or a 200-mile gravel adventure: comfort control and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops specifically focusing on two crucial metrics—outsweep and flare. Outsweep is created by rotating the drop below the brake perch outward. Flare is created by rotating the entire drop above the brake perch outward. FEATURES Updated distinctive Zipp cosmetics 70mm Reach and 115mm drop allow a comfortable hoods position and a shallow drops position 5° drop Flare and 11° drop outsweep creates a drops position 6cm wider than hoods Ergonomic top with 3° backsweep Matte Black nano blast aluminium Lifetime warranty SPECIFICATIONS MATERIAL (HB) AL-6061 CLAMP DIAM 31.8mm CLIP COMPATIBLE No Yes WIDTH (CENTER-TO-CENTER) 38cm 40cm 42cm 44cm REACH (HB) 70mm DROP (HB) 128mm RAMP ANGLE 10° OUTSWEEP 4° FINISH (HB) Bead Blast Black Bright Silver
The Service Course SL-80 provides comfortable and efficient positions on the bar tops brake hoods or down in the drops. The bar allows a neutral wrist position on the drops and a flat brake-hood transition. This minimizes the need for up-rotated bars. Drops are angled outward by 4 degrees reducing wrist strain. Named after its 80mm reach to bring the hoods and control levers back where you want them. The ergonomic 125mm drop places the angled drop position where you can easily reach it while maintaining a neutral wrist angle. The SL-80’s rounded bar top is clip compatible. Forged from lightweight 7075 aluminum. FEATURES Distinctive Zipp cosmetics 7050 Aluminum 80mm reach/125mm drop designed to fit a large number of riders Clip on compatible Lifetime warranty SPECIFICATIONS MATERIAL (HB) Al-7050 CLAMP DIAM 31.8mm CLIP COMPATIBLE Yes WIDTH (CENTER-TO-CENTER) 36cm 38cm 40cm 42cm 44cm 46cm REACH (HB) 80mm DROP (HB) 125mm RAMP ANGLE 7° OUTSWEEP 4° FINISH (HB) Matte with stealth decals
Zipp Service Course SL 80 Ergo handlebar is all about making you faster in style and comfort. The bar offers an 80mm reach and 125mm drop perfect for a rider looking for a medium reach and shallow drop who likes reaching down to rather than into the drops. This bar has a flattened top and 3° backsweep for a neutral wrist position on the tops. The bars feature a 7° ramp angle for a flat transition to the hoods and a 4° outsweep at the drops. In addition to the ergonomic benefits the Service Course SL 80 Ergo is our first ergo bar to be clip-on compatible. Made of 7050 aluminum the Service Course SL 80 Ergo weighs 275g for a 42cm-wide bar. Light weight stiffness and comfort: the Zipp Service Course line provides the right fit for all rider types. FEATURES Distinctive Zipp cosmetics 7050 aluminum for light weight and durability 80mm reach and 125mm drop for a medium-high position Flattened top shape with 3° backsweep for comfort Clip-on Compatible (40 42 44cm sizes only) Di2® RS910 junction compatible Matte Black nano blast aluminum Lifetime warranty SPECIFICATIONS MATERIAL (HB) Al-7050 CLAMP DIAM 31.8mm CLIP COMPATIBLE No Yes WIDTH (CENTER-TO-CENTER) 38cm 40cm 42cm 44cm REACH (HB) 80mm DROP (HB) 125mm RAMP ANGLE 7° OUTSWEEP 4° FINISH (HB) Matte with stealth decals
The bar offers the same compact reach and drop dimensions as the Service Course SL-70 but adds a flattened top section for a natural ergonomic grip on the bar tops and a revised ramp angle for proper fit. The SL-70 Ergo’s specially tuned drop shape creates comfortable hand positions with short reach to control levers vital for race situations. The bar’s 128mm drop help puts the rider low and in control without compromising comfort. Whether it’s a rider with smaller hands or a bigger rider getting aero by pairing this bar with a long stem this bar helps put just about any cyclists into his or her optimal position. FEATURES Distinctive Zipp cosmetics 7050 aluminum for light weight and durability 70mm reach and 128mm drop for a short-low position Flattened top shape with 3° backsweep for comfort Clip-on Compatible (40 42 44cm sizes only) Matte Black nano blast aluminum Lifetime warranty SPECIFICATIONS MATERIAL (HB) Al-7050 CLAMP DIAM 31.8mm CLIP COMPATIBLE No Yes WIDTH (CENTER-TO-CENTER) 38cm 40cm 42cm 44cm REACH (HB) 70mm DROP (HB) 128mm RAMP ANGLE 10° OUTSWEEP 4° FINISH (HB) Matte with stealth decals
The Service Course SL-70 is the bike fitter’s go-to bar. The short reach to the hoods allows a proper fit without compromising stem length and steering control. With the revised ramp angle proper fit is now achievable on even the most challenging setups. The 70mm reach is the shortest of Zipp’s Service Course bars. Together with its 128mm drop the bar is deal for riders preferring a low body position. Whether it’s a rider with a shorter torso or a bigger rider getting aero by pairing this bar with a long stem this bar helps put just about any cyclists into his or her optimal position. The SL-70’s flattened top provides a better ergonomic fit for the hand and is clip-on compatible. FEATURES Distinctive Zipp cosmetics 7050 aluminum for light weight and durability 70mm reach and 128mm drop for a short-low position Flattened top shape with3° backsweep for comfort Clip-on Compatible Matte Black nano blast aluminum Lifetime warranty SPECIFICATIONS MATERIAL (HB) Al-7050 CLAMP DIAM 31.8mm CLIP COMPATIBLE Yes WIDTH (CENTER-TO-CENTER) 36cm 38cm 40cm 42cm 44cm REACH (HB) 70mm DROP (HB) 128mm RAMP ANGLE 10° OUTSWEEP 4° FINISH (HB) Matte with stealth decals
The SL-70 Aero is a unidirectional carbon handlebar is packed with the innovations for best-in-class fit ergonomics and aerodynamic performance. With its wing-shaped bar top the SL-70 Aero features Zipp’s latest bar refinements while building on the trend-setting aero legacy of the VukaSprint. The wing-shaped top was designed using Computational Fluid Dynamics (CFD). The difference of that design is real saving 6.4 watts over a round-tube section bar top. Beyond aero performance the SL-70 Aero features a 70mm reach to allow proper fit without compromising stem length and steering control. The revised 10° ramp angle to the brake hoods eliminated need for up-rotated bars. The bar also provides ample wrist clearance for riding and sprinting in drops. FEATURES Updated distinctive Zipp cosmetics 70mm reach and 128mm drop allows for a low and aero drops positon. Internal cable routing is easy with Rapid Route™ Matte Black finish Lifetime warranty TECHNOLOGY RAPID ROUTE Zipp Rapid Routing™ cable exits are positioned for easy installation of brake cables making a TT or tri bike builder’s job so much easier. SPECIFICATIONS MATERIAL (HB) Unidirectional Carbon CLAMP DIAM 31.8mm CLIP COMPATIBLE No WIDTH (CENTER-TO-CENTER) 38cm 40cm 42cm 44cm REACH (HB) 70mm DROP (HB) 128mm RAMP ANGLE 10° OUTSWEEP 4° FINISH (HB) Matte with stealth decals
Zipp’s 808 Firecrest® Tubeless Disc-wheelset is pure engineering science. It has to be. To achieve speed with an 82mm rim depth is one thing but to be fast while offering high crosswind stability well that requires serious attention to detail. Yet that’s just what the 808 Firecrest Disc brake accomplishes – speed with stability and tubeless compatibility. That means you get all the aero benefits with having the ability to run lower tire pressure for increased cornering grip and compliance and reduced rolling resistance without the risk of pinch flats. You also get the greater stopping power of disc brakes. This wheelset is infused with technologies developed in Zipp’s Indianapolis advanced development lab. Zipp’s ABLC™ Sawtooth™ Technology uses a complex dimpling pattern to improve aero efficiency. At the center of the 808 Firecrest Tubeless Disc-brake is a versatile and durable new hubset the German-engineered ZR1 DB. Zipp’s new wheel cosmetics make this wheelset a perfect pairing of speed and style. FEATURES Zipp graphics and cosmetic identity that scream speed ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement Built with Sapim CX Sprint J-bend spokes An all-out aero 82mm rim profile that’s tubeless ready for increased speed and better cornering control and comfort ABLC Sawtooth™ dimple design helps manage air flow around the rim and contributes to create a faster more stable wheel Center locking rotor interface. Lockring is included XDR™ or SRAM/Shimano driver bodies Ships with 12mm front and rear end caps Campagnolo driver body sold separately Superior modulation and stopping power of disc brakes SPECIFICATIONS SIZE (WHEELS) 700c RIM CONSTRUCTION Carbon - w/Hooks TIRE COMPATIBILITY Tube-type or Tubeless tires BRAKE COMPATIBILITY Disc (Center Lock) DRIVER BODY TYPE n/a SRAM XDR SRAM/Shimano Road RIM - INSIDE WIDTH 19mm RIM FINISH UD fiber Impress technology RIM PROFILE Symmetrical SPOKE LENGTH DS 226mm 232mm SPOKE LENGTH NDS 230mm WEIGHT (G) 1917 WEIGHT BASED ON Wheel set in lightest configuration: 12mm through axles and XDR body. No tape or valve included. Front: 898g Rear: 1019g
Zipp’s 808 Firecrest® Tubeless Disc-wheelset is pure engineering science. It has to be. To achieve speed with an 82mm rim depth is one thing but to be fast while offering high crosswind stability well that requires serious attention to detail. Yet that’s just what the 808 Firecrest Disc brake accomplishes – speed with stability and tubeless compatibility. That means you get all the aero benefits with having the ability to run lower tire pressure for increased cornering grip and compliance and reduced rolling resistance without the risk of pinch flats. You also get the greater stopping power of disc brakes. This wheelset is infused with technologies developed in Zipp’s Indianapolis advanced development lab. Zipp’s ABLC™ Sawtooth™ Technology uses a complex dimpling pattern to improve aero efficiency. At the center of the 808 Firecrest Tubeless Disc-brake is a versatile and durable new hubset the German-engineered ZR1 DB. Zipp’s new wheel cosmetics make this wheelset a perfect pairing of speed and style. FEATURES Zipp graphics and cosmetic identity that scream speed ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement Built with Sapim CX Sprint J-bend spokes An all-out aero 82mm rim profile that’s tubeless ready for increased speed and better cornering control and comfort ABLC Sawtooth™ dimple design helps manage air flow around the rim and contributes to create a faster more stable wheel Center locking rotor interface. Lockring is included XDR™ or SRAM/Shimano driver bodies Ships with 12mm front and rear end caps Campagnolo driver body sold separately Superior modulation and stopping power of disc brakes SPECIFICATIONS SIZE (WHEELS) 700c RIM CONSTRUCTION Carbon - w/Hooks TIRE COMPATIBILITY Tube-type or Tubeless tires BRAKE COMPATIBILITY Disc (Center Lock) DRIVER BODY TYPE n/a SRAM XDR SRAM/Shimano Road RIM - INSIDE WIDTH 19mm RIM FINISH UD fiber Impress technology RIM PROFILE Symmetrical SPOKE LENGTH DS 226mm 232mm SPOKE LENGTH NDS 230mm WEIGHT (G) 1917 WEIGHT BASED ON Wheel set in lightest configuration: 12mm through axles and XDR body. No tape or valve included. Front: 898g Rear: 1019g
Zipp’s 808 Firecrest® Tubeless Disc-wheelset is pure engineering science. It has to be. To achieve speed with an 82mm rim depth is one thing but to be fast while offering high crosswind stability well that requires serious attention to detail. Yet that’s just what the 808 Firecrest Disc brake accomplishes – speed with stability and tubeless compatibility. That means you get all the aero benefits with having the ability to run lower tire pressure for increased cornering grip and compliance and reduced rolling resistance without the risk of pinch flats. You also get the greater stopping power of disc brakes. This wheelset is infused with technologies developed in Zipp’s Indianapolis advanced development lab. Zipp’s ABLC™ Sawtooth™ Technology uses a complex dimpling pattern to improve aero efficiency. At the center of the 808 Firecrest Tubeless Disc-brake is a versatile and durable new hubset the German-engineered ZR1 DB. Zipp’s new wheel cosmetics make this wheelset a perfect pairing of speed and style. FEATURES Zipp graphics and cosmetic identity that scream speed ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement Built with Sapim CX Sprint J-bend spokes An all-out aero 82mm rim profile that’s tubeless ready for increased speed and better cornering control and comfort ABLC Sawtooth™ dimple design helps manage air flow around the rim and contributes to create a faster more stable wheel Center locking rotor interface. Lockring is included XDR™ or SRAM/Shimano driver bodies Ships with 12mm front and rear end caps Campagnolo driver body sold separately Superior modulation and stopping power of disc brakes SPECIFICATIONS SIZE (WHEELS) 700c RIM CONSTRUCTION Carbon - w/Hooks TIRE COMPATIBILITY Tube-type or Tubeless tires BRAKE COMPATIBILITY Disc (Center Lock) DRIVER BODY TYPE n/a SRAM XDR SRAM/Shimano Road RIM - INSIDE WIDTH 19mm RIM FINISH UD fiber Impress technology RIM PROFILE Symmetrical SPOKE LENGTH DS 226mm 232mm SPOKE LENGTH NDS 230mm WEIGHT (G) 1917 WEIGHT BASED ON Wheel set in lightest configuration: 12mm through axles and XDR body. No tape or valve included. Front: 898g Rear: 1019g
Zipp’s 303 Firecrest Tubeless rim-brake wheelset is an all-around wheelset for a new era of road riding. It’s rich in heritage yet loaded with innovations. It’s as adept in the mountains as it is on rolling hills windswept farm lanes or ferocious field sprints. At Zipp we never rest on laurels. This wheelset features a 19mm internal width and is tubeless ready. That means you can run lower tire pressure for greater cornering grip and compliance with reduced rolling resistance without the risk the pinch flats. When it comes to pure speed the 303 Firecrest Tubeless packs a serious punch. It’s lightweight with ABLC™ Sawtooth™ Technology a complex dimpling pattern first developed for our top-level NSW wheel lineup. This technology helps to achieve the optimization of low aerodynamic drag and crosswind stability which we call AeroBalance™. Zipp’s ShowStopper™ textured braking surface delivers unrivaled rim braking performance in wet or dry conditions. At the center of the 303 Firecrest Tubeless rim-brake is a new versatile and durable hubset the German-engineered ZR1. FEATURES Zipp graphics and cosmetic identity that scream speed New ZR1 hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement Built with Sapim CX Sprint J-bend spokes Tubeless ensuring secure performance even when ridden at lower tire pressures Versatile 45mm rim profile that’s fast stable and versatile ABLC Sawtooth™ dimple design helps manage air flow around the rim and contributes to create a faster more stable wheel Showstopper™ textured brake track delivers superior modulation and shortest stopping distances in wet and dry conditions XDR™ or SRAM/Shimano driver bodies Ships with QR end caps quick release skewers Campagnolo driver body sold separately SPECIFICATIONS SIZE (WHEELS) 700c RIM CONSTRUCTION Carbon - w/Hooks TIRE COMPATIBILITY Tube-type or Tubeless tires BRAKE COMPATIBILITY Rim DRIVER BODY TYPE n/a SRAM XDR SRAM/Shimano Road RIM - INSIDE WIDTH 19mm RIM FINISH UD fiber adhesive decals RIM PROFILE Symmetrical SPOKE LENGTH DS 254mm 260mm SPOKE LENGTH NDS 254mm 264mm WEIGHT (G) 1530 WEIGHT BASED ON Lightest configuration: Quick Release axles and XDR body. No tape or valve included in weight. Front: 688g Rear: 842g
How do you make super better? Make it tubeless. Zipp’s go-to triathlon and time trial weapon the Super-9 Tubeless rim-brake wheel is now tubeless ready with a 18mm internal width. That means you can lower tire pressure for a host of benefits: better cornering grip better compliance and reduced rolling resistance. With tubeless you get all this without the risk of pinch flats. So go attack the course. The Super-9 gives you the technology needed to do your best. The Super-9 Carbon Clincher optimizes supreme aerodynamics power transfer stiffness lightweight and durability. FEATURES Zipp graphics and cosmetic identity that screams speed applied with our ImPress direct-print technology 18mm internal width and tubeless compatibility for optimization of wider tires with lower tire pressure lower rolling resistance and increase grip and compliance Aero durable light weight XDR™ or SRAM/Shimano driver bodies Ships with quick release skewer Campagnolo driver body sold separately SPECIFICATIONS SIZE (WHEELS) 700c RIM CONSTRUCTION Carbon - w/Hooks TIRE COMPATIBILITY Tube-type or Tubeless tires BRAKE COMPATIBILITY Rim DRIVER BODY TYPE SRAM XDR SRAM/Shimano Road RIM - INSIDE WIDTH 18mm RIM FINISH UD fiber Impress technology RIM PROFILE Symmetrical SPOKE LENGTH DS n/a SPOKE LENGTH NDS n/a