Wolf Tooth Shimano GRX Elliptical 110 BCD ChainringThis chainring is developed for use with Shimano GRX cranks and it uses its robust aluminium construction to deliver fantastic strength on every ride. Wolf Tooth has equipped this model with its patented Drop-Stop tooth profile, which delivers excellent longevity, chain retention and mud clearance on your adventures. The updated tooth profile works with SRAM Flattop chains in addition to other 9, 10, 11 and 12 speed chains (except the Shimano HG+ 12 speed chain).Compatibility:Shimano GRX cranksets including RX600 and RX810.Drop-Stop tooth profile is compatible with all 9, 10 and 11 speed chains or 12 speed SRAM Eagle, SRAM Flattop, Campagnolo, KMC, Connex or Wippermann chains.Wolf Tooth's patented Drop-Stop wide/narrow tooth profile provides the ultimate chain retention and mud shedding ability.Features: Material: 7075-T6 Aluminium Speed: 11 speed BCD: 110mm Number of Chainrings in Box: One Crank Compatibility: Shimano GRX cranksets including RX600 and RX810 Chain Compatibility: 9, 10 and 11 speed chains or 12 speed SRAM Eagle, SRAM Flattop, Campagnolo, KMC, Connex or Wippermann chainsChainline: 50mm (same as Shimano GRX chainrings)Made in the USA Part Numbers: 38T: WTOVALSH11038GR; 42T: WTOVALSH11042GR; 46T: WTOVALSH11046GR Weight: 38T: 72g; 42T: 92g; 46T: 102gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano GRX Elliptical 110 BCD ChainringThis chainring is developed for use with Shimano GRX cranks and it uses its robust aluminium construction to deliver fantastic strength on every ride. Wolf Tooth has equipped this model with its patented Drop-Stop tooth profile, which delivers excellent longevity, chain retention and mud clearance on your adventures. The updated tooth profile works with SRAM Flattop chains in addition to other 9, 10, 11 and 12 speed chains (except the Shimano HG+ 12 speed chain).Compatibility:Shimano GRX cranksets including RX600 and RX810.Drop-Stop tooth profile is compatible with all 9, 10 and 11 speed chains or 12 speed SRAM Eagle, SRAM Flattop, Campagnolo, KMC, Connex or Wippermann chains.Wolf Tooth's patented Drop-Stop wide/narrow tooth profile provides the ultimate chain retention and mud shedding ability.Features: Material: 7075-T6 Aluminium Speed: 11 speed BCD: 110mm Number of Chainrings in Box: One Crank Compatibility: Shimano GRX cranksets including RX600 and RX810 Chain Compatibility: 9, 10 and 11 speed chains or 12 speed SRAM Eagle, SRAM Flattop, Campagnolo, KMC, Connex or Wippermann chainsChainline: 50mm (same as Shimano GRX chainrings)Made in the USA Part Numbers: 38T: WTOVALSH11038GR; 42T: WTOVALSH11042GR; 46T: WTOVALSH11046GR Weight: 38T: 72g; 42T: 92g; 46T: 102gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Flat Top Cyclocross Chain Ring (110 BCD)Ideally suited for road, gravel and cyclocross riding disciplines, this flat top chainring features a hard-wearing aluminium construction that's perfect at handling the abuse that's associated with long days in the saddle. Designed for versatility, this model uses Wolf Tooth's renowned Drop-Stop technology, which improves chainring life and allows clearance for mud and debris. This makes it a great choice of upgrade for riders who want greater strength and reliability on every ride. Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our Drop-Stop technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, mountain bikes with 5-arm crank power meters, and even full on-road applications with the giant 50t rings. Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.Alternating wide/narrow tooth pattern prevents chain derailment. Compatibility:These rings are for use with 110 BCD 5 arm cranksets. Stock 2x bolts will not work. You will need bolts like Wolf Tooth's 6mm bolts which are optimized for single ring mounting. Chainline - varies - these rings can be mounted in either the big or small ring position on a double cranksets. The most common mounting is in the big ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring). Features: Material: 7075-T6 Aluminium Use: Cyclocross, Gravel and Road BCD: 110mm Arm Count: 5 arm Number of Chainrings in Box: OneMade in the USA Part Numbers: 34T: WT11034FT; 36T: WT11036FT; 38T: WT11038FT; 40T: WT11040FT; 42T: WT11042FT; 44T: WT11044FT; 46T: WT11046FT; 48T: WT11048FT; 50T: WT11050FT and 52T: WT11052FT Weight: 34T: 44g; 36T: 58g; 38T: 66g; 40T: 74g; 42T: 81g; 44T: 90g; 46T: 107g; 48T: 115g; 50T: 125gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This plier-set includes a spoke wrench, valve-core wrench, screwdrivers with multiple bits, an 8mm Hex and T10 and T25 Torx compatible bits. Plus, it features magnets to keep all the tool and tool-bits in place during use and when in storage. Lightweight, Durable and Convenient Multi-Tool The 8-Bit Pack Pliers is a lightweight multi-tool with 17 functions. Eight attachments nest inside the handles of master link pliers using magnets and a clever storage system. These attachments then fit into an 8mm ball detent swivel head that has a 4mm opening for hex bits, which adds functionality to the already-versatile master link pliers. This new multi-tool was created to solve almost any minor repair on a mountain bike (MTB) and road rides alike. Compatibility: Pliers work with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman) Specifications: Material: 7075-T6 Aluminium handles, CrV tool steel swivel head, S2 tool steel bits Size: 146mm x 20mm x 9mm Master links are not included Patent Pending Made in the USA Weight: 68g
Wolf Tooth Flat Top Cyclocross Chain Ring (110 BCD)Ideally suited for road, gravel and cyclocross riding disciplines, this flat top chainring features a hard-wearing aluminium construction that's perfect at handling the abuse that's associated with long days in the saddle. Designed for versatility, this model uses Wolf Tooth's renowned Drop-Stop technology, which improves chainring life and allows clearance for mud and debris. This makes it a great choice of upgrade for riders who want greater strength and reliability on every ride. Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our Drop-Stop technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, mountain bikes with 5-arm crank power meters, and even full on-road applications with the giant 50t rings. Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.Alternating wide/narrow tooth pattern prevents chain derailment. Compatibility:These rings are for use with 110 BCD 5 arm cranksets. Stock 2x bolts will not work. You will need bolts like Wolf Tooth's 6mm bolts which are optimized for single ring mounting. Chainline - varies - these rings can be mounted in either the big or small ring position on a double cranksets. The most common mounting is in the big ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring). Features: Material: 7075-T6 Aluminium Use: Cyclocross, Gravel and Road BCD: 110mm Arm Count: 5 arm Number of Chainrings in Box: OneMade in the USA Part Numbers: 34T: WT11034FT; 36T: WT11036FT; 38T: WT11038FT; 40T: WT11040FT; 42T: WT11042FT; 44T: WT11044FT; 46T: WT11046FT; 48T: WT11048FT; 50T: WT11050FT and 52T: WT11052FT Weight: 34T: 44g; 36T: 58g; 38T: 66g; 40T: 74g; 42T: 81g; 44T: 90g; 46T: 107g; 48T: 115g; 50T: 125gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano GRX 110 BCD Asymmetric ChainringCustomised to work with Shimano’s gravel bike GRX cranksets, this Wolftooth chainring is made from a tough 7075-T6 Aluminium and adopts “Drop-Stop” tooth technology. This ensures that your chain will always stay in place not matter how rough the terrain gets, increases the chainring’s durability and speeds up its mud clearing ability.Versatile Gravel Bike ChainringThe updated tooth profile works with SRAM Flattop chains in addition to other 9, 10, 11 and 12 speed chains (except the Shimano HG+ 12 speed chain).Features: Material: 7075-T6 Aluminium Speed: 9 to 12-Speed Bolt Circle Diameter (BCD): 4x110mm (Shimano asymmetric) Crank Compatibility: Shimano GRX cranksets including RX600 and RX810 Chain Compatibility: 9, 10 and 11-Speed chains or 12 speed SRAM Eagle, SRAM Flattop, Campagnolo, KMC, Connex or Wippermann chains (not suitable for Shimano HG+ 12-Speed chain).Chainline: 50mm (same as Shimano GRX chainrings)Made in the USA Patented Drop-Stop wide/narrow tooth profile provides the ultimate chain retention and mud shedding ability Optimised for use with drop bar bikes Sold inividually Manufacturer's Part Numbers: 38T: WTSH11038GR; 40T: WTSH11040GR; 42T: WTSH11042GR; 44T: WTSH11044GR; 46T: WTSH11046GR Weight: 38T: 72g; 40T: 84g; 42T: 89g; 44T: 92g; 46T: 102gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano GRX 110 BCD Asymmetric ChainringCustomised to work with Shimano’s gravel bike GRX cranksets, this Wolftooth chainring is made from a tough 7075-T6 Aluminium and adopts “Drop-Stop” tooth technology. This ensures that your chain will always stay in place not matter how rough the terrain gets, increases the chainring’s durability and speeds up its mud clearing ability.Versatile Gravel Bike ChainringThe updated tooth profile works with SRAM Flattop chains in addition to other 9, 10, 11 and 12 speed chains (except the Shimano HG+ 12 speed chain).Features: Material: 7075-T6 Aluminium Speed: 9 to 12-Speed Bolt Circle Diameter (BCD): 4x110mm (Shimano asymmetric) Crank Compatibility: Shimano GRX cranksets including RX600 and RX810 Chain Compatibility: 9, 10 and 11-Speed chains or 12 speed SRAM Eagle, SRAM Flattop, Campagnolo, KMC, Connex or Wippermann chains (not suitable for Shimano HG+ 12-Speed chain).Chainline: 50mm (same as Shimano GRX chainrings)Made in the USA Patented Drop-Stop wide/narrow tooth profile provides the ultimate chain retention and mud shedding ability Optimised for use with drop bar bikes Sold inividually Manufacturer's Part Numbers: 38T: WTSH11038GR; 40T: WTSH11040GR; 42T: WTSH11042GR; 44T: WTSH11044GR; 46T: WTSH11046GR Weight: 38T: 72g; 40T: 84g; 42T: 89g; 44T: 92g; 46T: 102gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano GRX 110 BCD Asymmetric ChainringCustomised to work with Shimano’s gravel bike GRX cranksets, this Wolftooth chainring is made from a tough 7075-T6 Aluminium and adopts “Drop-Stop” tooth technology. This ensures that your chain will always stay in place not matter how rough the terrain gets, increases the chainring’s durability and speeds up its mud clearing ability.Versatile Gravel Bike ChainringThe updated tooth profile works with SRAM Flattop chains in addition to other 9, 10, 11 and 12 speed chains (except the Shimano HG+ 12 speed chain).Features: Material: 7075-T6 Aluminium Speed: 9 to 12-Speed Bolt Circle Diameter (BCD): 4x110mm (Shimano asymmetric) Crank Compatibility: Shimano GRX cranksets including RX600 and RX810 Chain Compatibility: 9, 10 and 11-Speed chains or 12 speed SRAM Eagle, SRAM Flattop, Campagnolo, KMC, Connex or Wippermann chains (not suitable for Shimano HG+ 12-Speed chain).Chainline: 50mm (same as Shimano GRX chainrings)Made in the USA Patented Drop-Stop wide/narrow tooth profile provides the ultimate chain retention and mud shedding ability Optimised for use with drop bar bikes Sold inividually Manufacturer's Part Numbers: 38T: WTSH11038GR; 40T: WTSH11040GR; 42T: WTSH11042GR; 44T: WTSH11044GR; 46T: WTSH11046GR Weight: 38T: 72g; 40T: 84g; 42T: 89g; 44T: 92g; 46T: 102gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Flat Top Cyclocross Chain Ring (110 BCD)Ideally suited for road, gravel and cyclocross riding disciplines, this flat top chainring features a hard-wearing aluminium construction that's perfect at handling the abuse that's associated with long days in the saddle. Designed for versatility, this model uses Wolf Tooth's renowned Drop-Stop technology, which improves chainring life and allows clearance for mud and debris. This makes it a great choice of upgrade for riders who want greater strength and reliability on every ride. Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our Drop-Stop technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, mountain bikes with 5-arm crank power meters, and even full on-road applications with the giant 50t rings. Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.Alternating wide/narrow tooth pattern prevents chain derailment. Compatibility:These rings are for use with 110 BCD 5 arm cranksets. Stock 2x bolts will not work. You will need bolts like Wolf Tooth's 6mm bolts which are optimized for single ring mounting. Chainline - varies - these rings can be mounted in either the big or small ring position on a double cranksets. The most common mounting is in the big ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring). Features: Material: 7075-T6 Aluminium Use: Cyclocross, Gravel and Road BCD: 110mm Arm Count: 5 arm Number of Chainrings in Box: OneMade in the USA Part Numbers: 34T: WT11034FT; 36T: WT11036FT; 38T: WT11038FT; 40T: WT11040FT; 42T: WT11042FT; 44T: WT11044FT; 46T: WT11046FT; 48T: WT11048FT; 50T: WT11050FT and 52T: WT11052FT Weight: 34T: 44g; 36T: 58g; 38T: 66g; 40T: 74g; 42T: 81g; 44T: 90g; 46T: 107g; 48T: 115g; 50T: 125gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Flat Top Cyclocross Chain Ring (110 BCD)Ideally suited for road, gravel and cyclocross riding disciplines, this flat top chainring features a hard-wearing aluminium construction that's perfect at handling the abuse that's associated with long days in the saddle. Designed for versatility, this model uses Wolf Tooth's renowned Drop-Stop technology, which improves chainring life and allows clearance for mud and debris. This makes it a great choice of upgrade for riders who want greater strength and reliability on every ride. Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our Drop-Stop technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, mountain bikes with 5-arm crank power meters, and even full on-road applications with the giant 50t rings. Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.Alternating wide/narrow tooth pattern prevents chain derailment. Compatibility:These rings are for use with 110 BCD 5 arm cranksets. Stock 2x bolts will not work. You will need bolts like Wolf Tooth's 6mm bolts which are optimized for single ring mounting. Chainline - varies - these rings can be mounted in either the big or small ring position on a double cranksets. The most common mounting is in the big ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring). Features: Material: 7075-T6 Aluminium Use: Cyclocross, Gravel and Road BCD: 110mm Arm Count: 5 arm Number of Chainrings in Box: OneMade in the USA Part Numbers: 34T: WT11034FT; 36T: WT11036FT; 38T: WT11038FT; 40T: WT11040FT; 42T: WT11042FT; 44T: WT11044FT; 46T: WT11046FT; 48T: WT11048FT; 50T: WT11050FT and 52T: WT11052FT Weight: 34T: 44g; 36T: 58g; 38T: 66g; 40T: 74g; 42T: 81g; 44T: 90g; 46T: 107g; 48T: 115g; 50T: 125gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Wolf Tooth ReMote Dropper Lever is ergonomic, lightweight and easy to install. Utilising sealed cartridge bearings for a silky-smooth action and a low profile, textured lever machined to the highest quality, this is the ultimate dropper upgrade.Compatible with all cable actuated dropper posts, the ReMote Dropper Lever is simple to install, maintain and has been built to last. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Compatibility:Compatible with all cable actuated dropper posts.,Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. ,If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best.,ReMote for Magura is compatible with the 2-bolt clamp SRAM brakes that do not feature Matchmaker X clamps.,ReMote for Hope is only compatible with Tech 3 brakes..Mounting Types:ReMote IS-AB for Shimano I-Spec A or B - Includes IS-AB hardware,ReMote IS-II for Shimano I-Spec II - includes IS-II hardware ,ReMote MM SRAM/Avid MatchMaker X - Includes the MatchMakerX hardware, which is a T-Nut and bolt that allows the ReMote MM to attach to the MatchMakerX clamp. You will need the MatchMakerX handlebar clamp, which we do not sell but can easily be purchased.,ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.,ReMote 31.8 is available for road bikes where the ReMote is mounted next to the stem,ReMote Magura for Magura brakes and some 2-bolt clamp SRAM brakes - Includes Magura hardware,ReMote Hope for Tech3 Hope Brakes - includes Hope hardware,ReMote IS-EV for Shimano I-Spec EV - includes IS-EV hardware.
The ReMote Light Action Dropper Lever has a longer lever arm than the standard ReMote, reducing the actuation force required by a third and making it ideal for dropper posts with a harder pull or if you prefer a light actuation feel.Every single detail of the ReMote Light Action is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Wolf Tooth ReMote Installation Instructions Compatibility: Compatible with all cable actuated dropper posts., Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post.,If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best.,. Mounting Types: ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.,ReMote IS-AB for Shimano I-Spec A or B - Includes IS-AB hardware.,ReMote IS-II for Shimano I-Spec II - Includes IS-II hardware.,ReMote MM SRAM/Avid MatchMaker X - Includes the MatchMakerX hardware, which is a T-Nut and bolt that allows the ReMote MM to attach to the MatchMakerX clamp. You will need the MatchMakerX handlebar clamp, which we do not sell but can easily be purchased.,ReMote 31.8 is available for road bikes where the ReMote is mounted next to the stem.,ReMote Magura for Magura brakes and some 2-bolt clamp SRAM brakes - Includes Magura hardware,ReMote Hope for Tech3 Hope Brakes - Includes Hope hardware (see compatibility above),ReMote IS-EV for Shimano I-Spec EV - Includes IS-EV hardware.
Patented Drop-stop® Wide-narrow Tooth Profile For Minimised Dropped Chains,Perfect For 1x Setups,Machined In-house At Wolf Tooth's Hq In Minnesota, USA,.CompatibilityThese Rings Fit Any Sram 76 Bcd Spider Or Specialized Stout Crankset.,Threaded For Standard M8 Chainring Bolts. For The Xx1 Spider, We Recommend 6mm Bolts (Or Any Short M8 Chainring Bolt). For The Stout Crankset, We Recommend The 10mm Bolts Or The Bolts That Come With The Crankset.,For 1x9, 1x10, 1x11 And 1x12 Drivetrains (Including Sram Eagle)Compatible With All 10-, 11-, And 12-speed Chains Except Shimano 12-speed Chains.,If Using A 9-speed Drivetrain Use A 10-speed Chain (Shifts And Works Well On A 9-speed Drivetrain And Fits The Ring Tighter For Better Chain Retention).,..
The new Shimano XTR, XT, and SLX 12spd Hyperglide+ chain works differently than other products on the market so Wolf Tooth engineers developed a completely new tooth profile to provide optimal chain retention and durability when using this new chain technology. Key Features: Fits any 104 BCD crankset,The new HG+ chain interacts with the chainring much differently than a traditional wide/narrow design. Wolf Tooth engineers spent the time to understand how the system works and design a new tooth profile that is optimized for this system.,Engineered proprietary tooth profile maintains the quiet and smooth performance of the HG+ drivetrain with legendary Wolf Tooth chain retention.,Prevents premature ring and chain wear that can come from non-optimized profiles.,. Compatibility: Fits any 104 BCD crankset,Compatible with Shimano 12-speed Hyperglide+ chains,Chainring Bolts: All tooth sizes require 1x bolts that are 6mm long with exception to 30t rings which are threaded and require bolts that are 7-10mm long. Wolf Tooth carries both sizes in a variety of colors.,104 x 30t - use 10mm bolts,104 x 32t, 34t, 36t, 38t use 6mm bolts.,If using a bashring you will need 8mm bolts (most stock bolts on 3x cranksets are 8mm),104 BCD chainrings work on many older 2x Shimano crankset (XT, SLX, or Deore).
The Wolf Tooth Elliptical 110 BCD 4 Bolt Chainring for Shimano GRX is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with Shimano GRX drivetrains, this Wolf Tooth 110 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.PowerTracWolf Tooth’s PowerTrac Elliptical (PTE) design, as the name indicates, is driven by a concern for power and traction – and crucially for you, premised on a wealth of knowledge from precision engineers who also love to ride bikes.A growing number of riders are converting to elliptical chainrings on 1x setups for the simple reason that they have been demonstrated to improve ride quality.The idea behind elliptical chainrings can be summarised as follows: biomechanical power output varies throughout a pedal stroke, at positions where power is higher, having a larger diameter section of chainring, and thus greater engagement area, translates into greater forward propulsion. At positions where biomechanical power is lower, a smaller chainring diameter means greater efficiency in rotation. Overall what this means for you is maximised power output throughout each pedal stroke.Wolf Tooth note that elliptical rings also mean steadier torque on the rear wheel as there is less spinning on the downstroke and easier rotation in between these. Steadier torque on the rear wheel gives better traction and sustained momentum – great on tough climbs and through headwinds.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go. Key Features: Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Elliptical design,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish,. Compatibility: Shimano GRX cranksets including RX600 and RX810, Drop-Stop® FT tooth profile is compatible with 9, 10, 11 and 12-speed chains (including SRAM Flattop),Not compatible with Shimano HG+ 12-speed chains .
By removing the secondary hydraulic system in favour of a simple cable and mechanical actuator, Wolf Tooth make your RockShox Reverb dropper post more efficient whilst giving you all the benefits of the widely-lauded ReMote Dropper Lever. The mechanism can be easily installed in 15 minutes, is readily detachable for servicing and offers a leak-proof, robust, low-maintenance mechanical actuation system for your RockShox Reverb post. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers. In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop. Compatibility: Compatible with Rockshox Reverb B Spec Stealth (internal) routing dropper posts. NOT compatible with A1 spec Reverbs NOT compatible with non-Stealth (externally routed hydraulic hose) ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.
Wolf Tooth RockShox Reverb Sustain Dropper RemoteThis remote sustain is used to simplify the actuation system, accelerate return speeds, improve tactile feedback and reduce level throw for a better ride. By removing the secondary hydraulic system in favour of a simple cable and mechanical actuator, Wolf Tooth make your RockShox Reverb dropper post more efficient whilst giving you all the benefits of the widely-lauded ReMote Dropper Lever. The mechanism can be easily installed in 15 minutes, is readily detachable for servicing and offers a leak-proof, robust, low-maintenance mechanical actuation system for your RockShox Reverb post. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop. Compatibility:Compatible with RockShox Reverb B Spec Stealth (internal) routing dropper posts. Not compatible with A1 spec Reverbs. Not compatible with non-Stealth (externally routed hydraulic hose). ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max. Features: Clamp Diameter: 22.2mm Dropper Post Compatibility: Rockshox Reverb B Spec Stealth internally routed NOT compatible with A1 spec Reverbs NOT compatible with non-Stealth (externally routed hydraulic hose) Manufacturer's Part Number: WTREMOTESUSBCLMPBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Wolf Tooth 104 BCD Chainring is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly on anything from an MTB to a road bike, the Wolf Tooth 104 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish.Compatibility:Fits any 104 BCD cranksets,For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle),Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains.,If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).,Chainline: (approximate as BB centring and cranksets vary) 30t - 48mm on 3x cranksets and 49mm on 2x.Chainring bolts are required for 1x:104 x 30t - use 10mm bolts ,104 x 32t uses 6mm chainring bolts,If mounting a 104 BCD bash ring you will need 8mm bolts which Wolf Tooth does not sell but are standard on most triple cranksets..
Wolf Tooth Reverb B SRAM Matchmaker SustainThis lever and cable conversion kit is specifically designed for mountain bike (MTB) riders who have a Rockshox B-post and a SRAM matchmaker clamp. Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote dropper lever.Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation, to smooth ball bearing action, to engineered failure point, the lightweight ReMote leads in every category.Features: Material: 6061 T6 Aluminium with Delrin axle and pusher Use: Mountain Bike (MTB) Type: Lever and cable conversion kit for Rockshox B-post to fit SRAM matchmaker Made in USA Weight: 42gTechnologies: UpFront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-Diameter Ball-Bearing Pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-Profile Lever: The ReMote lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated Cable Adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-Traction Lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad Compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.Manufacturer's Part Number: WTREMOTESUSBMMBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Wolf Tooth 64 BCD Chainring is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly on anything from an MTB to a road bike, the Wolf Tooth 64 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.Looks great when paired with the Wolf Tooth 104 BCD bash ring.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish.Compatibility:Fits any 104/64 BCD crankset (104 BCD is the middle/big position 64 is the smallest ring position),The Universal Model fits both 104/64 BCD cranksets and the Shimano 11 speed XT M8000 cranks and SLX M7000 cranks. ,Drivetrains: 1x9, 1x10, 1x11 and 1x12 drivetrains,Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains,Shimano 12-speed chains require the use of our Shimano 12-speed specific chainrings,If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention,Chainline (approximate as BB centring and cranksets vary),Chainline is 46 mm on a triple and 48 mm on a double crank,Chainline on a Standard M8000 or M7000 crankset is 48mm and 50mm on a boost version.,You can use the stock bolts to mount this chainring.