The Topeak Joe Blow Tubi 2Stage Floor Pump is a new approach to tubeless tyre installation. The innovative Tubi-Head removes the Presta valve core before inflation which allows high air flow to rapidly seat and inflate tubeless tyres with no pressure loss or messy sealant leaks. The 2Stage pump design delivers high pressure or high volume with a flip of the switch to quickly fill any size tyre.Stage 1 opens both barrels for huge air volume, reaching 30 psi with 30% less effort.Stage 2 utilizes the small barrel for high pressure up to 160psi.The accurate dual scale gauge delivers precise readings from low pressure MTB and Fat Bike tyres to high pressure Road bike tyres all from the same pump.Painted steel / Anodized aluminium barrel and durable steel baseOversized, padded handleTubi-Head connector for Presta and Schrader (with included adaptor) valvesSelector for high-pressure or high volumeExtra-long hose160psi analogue 2stage gaugeAir pressure release buttonVolume per stroke: 715cc (stage 1), 258cc (stage 2)Height: 740mm
Topeak Torq Stick Torque Wrench SetThe Torq Stick Torque Wrench Set from Topeak is ideal for fitting low to medium torque component bolts. With a reversible hex drive ratchet head for easy tooling, durable tool-bits and a 4-20 Nm torque range, this wrench set is a beneficial workshop-quality addition to any mechanics tool bag.Adjustable Ratchet Head Hex Drive Torque WrenchThis torque wrench has an adjustable preset range of 4-20Nm while featuring a standard hex drive reversible ratcheting head. Plus, it includes 9 tool bits with a generous 30mm length for reaching tough bolt locations. Knurling on the individual tool bits provides additional grip when changing or removing from the organizer.Compact, Durable and Easy to UseAn incredibly compact torque wrench with adjustable torque value range of 4-20 Nm. A standard hex drive reversible ratcheting head with adjustable preset torque values allows you to tighten frame or component bolts safely and with confidence. Includes a five bit storage pen with visible window design letting you find the correct bit quickly and easily. Features: Functions: 11 Tools: 3 / 4 / 5 / 6 / 8 / 10 Allen bits; T20 / T25 / T30 Torx bits Torque Range: 4 - 20 Nm Bit Material: S2 hardened steel Ratchet Material: Hardened steel Body Material: Aluminium / Engineering grade polymer Size: 22.7 x 2.5 x 2.15 cm / 8.9” x 1” x 0.8” (Torque tool) Weight: 187 g / 6.60 oz (Torque tool only) Added Features: Ratchet tool and 9-bit organizerTopeak Part Number: TT2592Buy Topeak Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Topeak Joe Blow Tubi 2Stage Floor PumpThe Joe Blow Tubi 2Stage Floor Pump features Topeak's Tubi head with an extra-long 360 degree pivoting hose and integrated pressure release button. Compatible with Presta and Schrader valves, this versatile floor pump has an adjustable 2-stage pressure gauge (stage 1: 0 - 30 psi / stage 2: 30 - 160 psi) to meet your tyre inflation needs. Ideal for multi-bike maintenance, this pump is suited to efficiently inflating high volume mountain bike (MTB) and fat bike tyres, and also high-pressure Road and BMX tyres. And this pump delivers the huge airflow required to seat tubeless tyres correctly.Tubeless Tyre Compatible Floor PumpThe JoeBlow Tubi 2Stage makes installing tubeless tyres quick and easy. The innovative TubiHead removes the Presta valve core - delivering massive air flow - to rapidly seat and inflate tubeless tyres with no pressure loss or messy sealant leaks!Adjustable High-Pressure and High-Volume Flip Switch DesignThe 2Stage pump design delivers high pressure or high volume with a flip of the switch to quickly fill any size tyre. Stage 1 opens both barrels for huge air volume, reaching 30 psi with 30% less effort. Stage 2 utilizes the small barrel for high pressure up to 160psi. The accurate dual scale gauge delivers precise readings from low pressure MTB and Fat Bike tyres to high pressure Road bike tyres - all from the same pump. Extra-long hose for added reach and durable steel barrel and large stable base makes this the perfect floor pump for all bikes. Features: Head: Tubi head with extra-long 360 degree pivoting hose and built-in hose pressure release button. Fits Presta / Schrader valves (Schrader valve adapter included) Barrel: Painted Steel / Anodised Aluminium Gauge: 160 psi / 11 bar, 3” mid mount analog; Stage 1: 0 - 30 psi; Stage 2: 30 - 160 psi Handle: Oversize / Dual density polymer Base: Hardened Steel Volume Per Stroke: 715 cc (Stage 1); 258 cc (Stage 2) Size: 74 x 26・.6 x 18 cm / 29.1” x 10.5” x 4.6” Weight: 2.3 kg / 5.07 lb Added Features: Schrader valve adapter, Hose dockTopeak Part Number: TJB-T2STGBuy Topeak Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The perfect quick-mount rear rack system attaches to MTB full suspension seatstays or hardtail MTB without rack eyelets. This one-size-fits-all rear rack features an innovative top plate that adjusts to level independent of the seatstay angle. Integrated QuickTrack® system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix® / RackTime® Snapit or Vario system bags. NOTE :*TetraRack is not recommended for carbon forks and seat stays*TetraRack series racks are not compatible with front or rear mounted V-Brake type systems. ATTACHMENTS Seatstays with hook and loop straps ADJUSTMENT Strut slots MATERIAL Aluminum / Engineering grade polymer / Nylon straps COMPATIBILITY Topeak MTX / RX TrunkBags KLICKfix® / RackTime® Snapit or Vario system bags MAX LOAD 12 kg / 26 lb ADDED FEATURE Clamp for rear reflector Tail Light Mount SIZE 42 x 33. 2 x 14.5 cm / 16.5” x 13.1” x 5.7” WEIGHT 960 g / 2.12 lb
The perfect quick-mount rear rack system attaches to MTB full suspension seatstays or rigid bikes without rack eyelets. Features an innovative top plate which can be adjusted on a convex track, to keep it level to the ground, independent of seat stay angle. Integrated QuickTrack™ system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with RackTime® Snapit system bags.*TetraRack is not recommended for carbon forks and seat stays
The perfect quick-mount front rack system for MTB suspension forks or rigid forks without rack eyelets. Features an innovative top plate which can be adjusted on a convex track, to keep it level to the ground, independent of fork angle. Integrated QuickTrack™ system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with RackTime® Snapit system bags.
The perfect quick-mount front rack system for MTB suspension forks or rigid forks without rack eyelets. This one-size-fits-all front rack features an innovative top plate that adjusts to level independent the fork angle. Integrated QuickTrack® system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix® / RackTime® Snapit or Vario system bags.NOTE :*TetraRack is not recommended for carbon forks and seat stays*TetraRack series racks are not compatible with front or rear mounted V-Brake type systems. ATTACHMENTS Fork with hook and loop straps ADJUSTMENT Strut slots MATERIAL Aluminum / Engineering grade polymer / Nylon straps COMPATIBILITY Topeak MTX / RX TrunkBags RackTime® Snapit / Vario system bags MAX LOAD 10 kg / 22 lb ADDED FEATURE Clamp for front reflector Tail Light Mount SIZE 37. 4 x 32.2 x 16.5 cm / 14.7” x 12.7” x 6.5” WEIGHT 910 g / 2.01 lb
A complete tubeless tire repair / CO2 inflation kit for road and touring enthusiasts packed into a sleek under top tube mounted organizer case. Internal organizer keeps gear neatly and securely in place. Includes Tubi 11 Power Lever X 3 pcs of 3.5mm x 5cm tire repair plugs and AirBooster CO2 inflator with enough room to carry two 16g CO2 cartridges and a spare tube up to 700 x 40c. *CO2 cartridge and inner tube not included Repair Kit includes• Tubi 11 tool Power Lever X 3x3.5mm x 5cm tyre repair plugsAirBooster CO2 inflator plus spacespace for two 16g CO2 cartridgesand 700 x 40c tube (cartridges andtubes not included). CAPACITY 0.6 L COMPARTMENTS One main internal organizer SEAT TUBE DIAMETER Fits ø28 - ø60 mm TOP TUBE DIAMETER Fits ø28 - ø70 mm MATERIAL 1000D Nylon WEIGHT 363.5 g / 12.82 oz (Bag with repair kit)162 g / 5.71 oz (Bag only) SIZE 23.3 x 9 x 4.3 cm / 9.2” x 3.5” x 1.7” COMPATIBILITY Up to 700 x 40c inner tubes ADDED FEATURES Waterproof zipper
The Topeak Tetrarack M2L Rear Rack is a perfect quick-mount rear rack system attaches to full suspension mountain bike seat stays or hardtail MTB without rack eyelets. Ideal for bike packing or touring adventures.Attachments: Seat stays with hook and loop strapsMaterial: Aluminium / Engineering grade polymer / Nylon strapsAdjustments: Strut slotsCompatibility: Topeak E-Xplorer TrunkBox, MTX TrunkBags, KLICKfix / RackTime Snapit or Vario system bagsMax Load: 12kg / 26lbSize: 47.5 x 38.5 x 13.5cm / 18.7 x 15.2 x 5.3 Weight: 1.1kg / 2.43ozAdded Feature: Clamp for rear reflector, Taillight MountThis large rear rack features an innovative top plate that adjusts to level independent of the seat stay angle. Integrated QuickTrack system allows Topeak TrunkBags / TrunkBox to slide and lock into place and release with the push of a button. Innovative hook and loop strap mounting system cinches down tightly to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags.
The MTX TrunkBag uses a unique material process to provide our largest stiffest and most weather resistant MTX series bag. In addition to the expandable top section and rear water bottle holder the side panels expand to full panniers maximizing capacity. Compatible with all MTX QuickTrack® racks with attachable side frames. MTX Dual Side Frames are required when using panniers on MTX BeamRacks. CAPACITY 22.6 L / 1380 ci COMPARTMENTS 1 divided main with multi-stage expandable topTwo side with expandable panniers MATERIAL 600 denier polyester MAX LOAD Limited to rack maximum load rating INSULATION Molded EVA foam BAG ATTACHMENT MTX QuickTrack® with attached side panels ADDED FEATURES Water bottle holder Shoulder strapCarrying handle 3M™ reflective stripSafety light clip Elastic top bungeesOptional rain cover* 3M™ is a registered trademark of 3M Company. SIZE 36 x 25 x 21.5-29 cm / 14.1” x 9.8” x 8.5”-11.4” WEIGHT 1160 g / 2.53 lb
The MTX TrunkBag uses a unique material process to give our largest, stiffest, and most weather resistant MTX series bag. In addition to the expandable top section and rear water bottle holder, the side panels expand to full panniers maximizing capacity. Compatible with all MTX QuickTrack™ racks with attachable side frames.MTX Side Frame are required for use on MTX TrunkBag with panniers.Capacity22.6 L / 1380 ci.Compartments1 Divided Main with Multi-stage Expandable Top,Two Side with Expandable Panniers.Material600 Denier Polyester.Max. LoadLimited to Rack Maximum Load Rating.InsulationMolded EVA foam.Bag AttachmentMTX QuickTrack™ with Attached Side Panels.Added FeaturesWater Bottle Holder,Shoulder Strap,Carrying Handle,3M™ Reflective Strip (* 3M™ is a registered trademark of 3M Company.),Safety Light Clip,Elastic Top Bungees,Optional Rain Cover.Size (L x W x H)36 x 25 x 21.5~29 cm / 14.1” x 9.8” x 8.5”~11.4”.Weight1160 g / 2.53 lbs.
The perfect quick-mount front rack system for MTB suspension forks or rigid forks without rack eyelets. Ideal for those wanting to go bike packing using a mountain bike.Strut slot adjustments allow the rack top plate to be level independent of the fork angleAdjustable straps with padded feet securely attach rack to fork legsCompatible with Topeak QuickTrack system bagsCompatible with KLICKfix / RackTime Snapit or Vario system bagsIncluded clamp allows mounting of reflectorFeatures an innovative top plate which can be adjusted on a convex track, to keep it level to the ground, independent of fork angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with RackTime Snapit system bags.
This is Topeak's largest MTX Trunk bag and features a new process that marries rigid moulded panels with flexible 600 denier fabric to make this the stiffest, most weather resistant MTX bag yet.600 Denier Polyester Dupont Teflon Coating for superb weather resistanceExpandable, divided main compartment with two side panniersRear water bottle holderInsulated main compartmentPadded foam walls protect loadElastic top bungees3M reflective strip for safetyBuilt-in carrying handle, plus detachable shoulder strapMounting: QuickTrack mount for MTX racksSafety light clipDimensions: 36x25x21.5-29cmCapacity: 22.6L1.160gThe expandable main compartment with two side panniers gives you plenty of storage space which makes this bag ideal for light mountain touring, road touring and commuting. The foam walls provide padding and insulation for use as a cooler or camera bag whilst the extra thick rigid foam sides, top and bottom makes sure your items stay well protected. Other features include elastic top bungees, insulated water bottle holder on back of the bag, safety light clip and 3M reflective strip for extra visibility. The built in carry handle and detachable shoulder strap make the bag easy to carry when not on the bike.
The Pannier DryBag DX is a large capacity waterproof pannier featuring a sonically welded and fully seam sealed 420 denier and 840 denier exterior. A watertight roll- top closure provides maximum protection from road spray and wet weather. Its quick release Hook and Lock system attaches the pannier securely to the rack and makes installation and removal quick and easy. It is perfect for touring in wet conditions or for daily commuting. CAPACITY 25 L / 1525 ci (per piece) COMPARTMENT One main compartment MATERIAL 420 denier / 840 denier nylon waterproof fabric sonically welded seams MAX LOAD 12.5 kg / 27.5 lb ADDED FEATURES Roll-top closure Reflective printingAutomatic lock slidable hooks for exact positioningPress & pull for quick release Carrying handle BAG ATTACHMENT QuickClick® / Hook and lock systemFits racks ø 8 / 10 / 12 mm SIZE 65 x 30/28 x 18 cm / 25.6” x 11.8”/11” x 7.11” (Open) WEIGHT 1400 g / 3.09 lb (Per Piece)
A large capacity seat bag specifically designed for bikepackers wanting a streamlined way to carry gear without the need for a rear rack. The reinforced, anti-slip/scratch fabric protects the saddle while the advanced mounting system enables convenient and secure mounting to seatpost and saddle rails. Easy access waterproof carry bag and built-in air release purge valve keeps bag compact and dry while you’re on your next adventure.Key Features: Material: Polyethylene / Anti-slip PU leather / Nylon / Engineering grade polymer Lightweight, durable, water repellent and stain resistant,Bag attachment: Holster with hook and loop fastener and buckle fastener ,Waterproof rating: 10,000 mm (waterproof inner bag) ,Max load capacity: 5 kg / 11 lb ,Added features: Waterproof carry bag, Air release purge valve, Attachable rear light strap, Optional backloader Wishbone ,Size: 51 x 24 x 22 cm / 20.1” x 9.4” x 8.7” (15 L), 46 x 24 x 22 cm / 18.1” x 9.4” x 8.7” (10 L) ,Weight: 525 g / 18.52 oz (15 L), 508 g / 17.92 oz (10 L).
Topeak BackLoader Saddle BagThe ideal companion for adventures on the road, this Saddle Bag from Topeak offers a roomy 10-litre compacity and benefits from a waterproof and stain-resistant design, so you know it can handle tough and challenging conditions and terrain. Rugged ConstructionThe BackLoader Saddle Bag attaches to your seat post with a super-secure hook and loop attachment that can be connected to most types of bike frames. The pack comes with a polyethene nylon construction which is a super robust material that comes with an additional layer of protection with a water repellent and stain-resistant coating. For even further protection for your stuff, the interior of the pack comes with a completely waterproof lining.FeaturesAir release buttonSafety light attachment clipPolyethene nylon constructionWater repellent and stain resistant coatingHook and loop fastenerMinimum Seatpost Clearance: L1:9cm/3.5", L2: 2.5cm/1"Waterproof: YesCapacity: 10 LitreDimensions: 60 x 20 18cmWeight: 480gBuy Topeak Saddle Bags from Chain Reaction Cycles, the World's Largest Online Bike Store.
The perfect quick-mount front rack system for road cross hybrid or touring bikes with rigid forks. This one-size-fits-all front rack features an innovative top plate that adjusts to level independent the fork angle. Integrated QuickTrack® system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. NOTE :*TetraRack is not recommended for carbon forks and seat stays*TetraRack series racks are not compatible with front or rear mounted V-Brake type systems. ATTACHMENTS Fork with hook and loop straps ADJUSTMENT Strut slots MATERIAL Aluminum / Engineering grade polymer / Nylon straps COMPATIBILITY Topeak MTX / RX TrunkBags MAX LOAD 7 kg / 15 lb ADDED FEATURE Clamp for front reflector Tail Light Mount SIZE 33 x 29. 3 x 12 cm / 13” x 11.5” x 4.7” WEIGHT 840 g / 1.85 lb
The Mountain 2Stage Digital shock pump features an innovative 2Stage pressure selector that lets you choose high pressure for filling suspension forks and shock units or high volume for inflating mountain bike tires. Integrated easy-to-read digital gauge provides accurate pressure readings up to 300psi / 20.7bar. A Pressure-Rite connector accepts Presta and Schrader valves while the flexible hose takes stress off valve stems when inflating tires. The air release button makes setting proper pressure quick and easy. HEAD SmartHead® ThreadLock Pressure-Rite valve BARREL Aluminum GAUGE 300 psi / 20.7 bar DigitalStage 1 - High VolumeStage 2 - High Pressure UNIT psi bar kg / cm2 BATTERY CR2032 x 1 (included) SIZE 26 x 4.7 x 3.5 cm / 10.2” x 1.85” x 1.46” WEIGHT 210 g / 7.41 oz PRESSURE TUNING Air release button VOLUME PER STROKE Stage 1 - High Volume (84 cc / Tires)Stage 2 - High Pressure (11.2 cc / Shocks)
Large weather resistant trunk bag based on the popular MTX DXP, but with Velcro mounting straps. Complete with fold-out panniers, expanding top, and water bottle holder.600 Denier Polyester Dupont Teflon Coating for superb weather resistance,Expandable, divided main compartment with two side panniers,Padded foam walls protect load,Elastic top bungees,3M reflective strip for safety,Built-in carrying handle, plus detachable shoulder strap,Compatible with all rear racks,Safety light clip,36x25x21.5/29cm,22.6L,995g.
An aluminium air chamber with inflator head that stores an air charge of one litre, up to 200 psi / 14 bar. Works with a floor pump to quickly fill your tyres and ensures proper installation on a tubeless rim at home. Once you flip the selector from “CHARGE” to “INFLATE” mode, air bypasses the chamber as you use the floor pump to inflate your tyre to the perfect pressure. An integrated flexible hose with pump head works with Presta and Schrader valves and takes stress off the valve stem while pumping.