The new e-bike saddle 6OX combines the advantages of the successful saddle models Ergowave and Ergolux. As part of the product development, the shape of the saddle was adapted and perfected for the special use on the E-MTB as well as for the Gravity Bike.Perfect Fit - The correct saddle width is a key for maximum performance. Available widths in cm: 13, 14, 15, 16More free space - less pressure - The proven, outstanding SQlab staged saddle shape with the saddle nose that dips below level also provides more freedom for the 6OX and less pressure, equally so for men and for women.Perfect hold - The SQlab saddle shape with the raised seat surface is already perfectly suited for riding uphill and provides more power to the pedals on straights. Additionally, a special non-slip logo design ensures even more grip towards the back.Grip design - The grip material on the raised stage provides additional hold towards the back.Biomechanics - The proven SQlab 6OX active saddle technology provides increased efficiency for pedalling, as well as more comfort and less stress on intervertebral discs.The 6OX saddle is equipped with 3 different elastomer dampers that are tailored individually to body weight and can be interchanged as needed.The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones. The raised back section provides more rearward support and ensures efficient power transmission. The grip material on the raised back provides additional support to the rear. In addition, the saddle cover is robust, especially at the edges.The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 6OX became a little bit wider, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the E-MTB with perfect dampening properties for rough off-road terrain.Due to these modifications, the 6OX is the ideal saddle for long and steep climbs on the E-MTB and at the same time, even on bikes without an engine, it provides an optimum relief. The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones.The SQlab active-saddle technology lets the saddle follow the pedalling motion as comfort increases, the vertebral discs are mobilized and pressure on the sit bones is minimised. The correct width saddle is a prerequisite for maximum performance. Available widths: 13 cm/14 cm/15 cm/16cm.
The new e-bike saddle 6OX combines the advantages of the successful saddle models Ergowave and Ergolux. As part of the product development, the shape of the saddle was adapted and perfected for the special use on the E-MTB as well as for the Gravity Bike.Perfect Fit - The correct saddle width is a key for maximum performance. Available widths in cm: 13, 14, 15, 16More free space - less pressure - The proven, outstanding SQlab staged saddle shape with the saddle nose that dips below level also provides more freedom for the 6OX and less pressure, equally so for men and for women.Perfect hold - The SQlab saddle shape with the raised seat surface is already perfectly suited for riding uphill and provides more power to the pedals on straights. Additionally, a special non-slip logo design ensures even more grip towards the back.Grip design - The grip material on the raised stage provides additional hold towards the back.Biomechanics - The proven SQlab 6OX active saddle technology provides increased efficiency for pedalling, as well as more comfort and less stress on intervertebral discs.The 6OX saddle is equipped with 3 different elastomer dampers that are tailored individually to body weight and can be interchanged as needed.The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones. The raised back section provides more rearward support and ensures efficient power transmission. The grip material on the raised back provides additional support to the rear. In addition, the saddle cover is robust, especially at the edges.The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 6OX became a little bit wider, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the E-MTB with perfect dampening properties for rough off-road terrain.Due to these modifications, the 6OX is the ideal saddle for long and steep climbs on the E-MTB and at the same time, even on bikes without an engine, it provides an optimum relief. The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones.The SQlab active-saddle technology lets the saddle follow the pedalling motion as comfort increases, the vertebral discs are mobilized and pressure on the sit bones is minimised. The correct width saddle is a prerequisite for maximum performance. Available widths: 13 cm/14 cm/15 cm/16cm.
The new e-bike saddle 6OX combines the advantages of the successful saddle models Ergowave and Ergolux. As part of the product development, the shape of the saddle was adapted and perfected for the special use on the E-MTB as well as for the Gravity Bike.Perfect Fit - The correct saddle width is a key for maximum performance. Available widths in cm: 13, 14, 15, 16More free space - less pressure - The proven, outstanding SQlab staged saddle shape with the saddle nose that dips below level also provides more freedom for the 6OX and less pressure, equally so for men and for women.Perfect hold - The SQlab saddle shape with the raised seat surface is already perfectly suited for riding uphill and provides more power to the pedals on straights. Additionally, a special non-slip logo design ensures even more grip towards the back.Grip design - The grip material on the raised stage provides additional hold towards the back.Biomechanics - The proven SQlab 6OX active saddle technology provides increased efficiency for pedalling, as well as more comfort and less stress on intervertebral discs.The 6OX saddle is equipped with 3 different elastomer dampers that are tailored individually to body weight and can be interchanged as needed.The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones. The raised back section provides more rearward support and ensures efficient power transmission. The grip material on the raised back provides additional support to the rear. In addition, the saddle cover is robust, especially at the edges.The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 6OX became a little bit wider, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the E-MTB with perfect dampening properties for rough off-road terrain.Due to these modifications, the 6OX is the ideal saddle for long and steep climbs on the E-MTB and at the same time, even on bikes without an engine, it provides an optimum relief. The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones.The SQlab active-saddle technology lets the saddle follow the pedalling motion as comfort increases, the vertebral discs are mobilized and pressure on the sit bones is minimised. The correct width saddle is a prerequisite for maximum performance. Available widths: 13 cm/14 cm/15 cm/16cm.
The SQlab 70X Grips are the ergonomic grip for pros! Perfect fit, more volume and an intelligent shape for more absorption. Gravity and downhill grip offer maximum control and grip in rough terrain, even in wet and muddy conditionsSpecial textured zone of the front and bottom side provides optimal support for the fingers in any situationVarious rubber compounds ensure a perfect grip level and high comfortSizes differ in diameter and shapeThe 70x grip offers the perfect handle ergonomics for experts. The gravity and downhill grip offer maximum control and grip in rough terrain, even in wet and muddy conditions. The scope of delivery includes one set of grips. The special textured zone of the front and bottom side provides optimal support for the fingers in any situation. The exterior side ensures the needed comfort. The clamp moved from the outside to the inside during the product development and is now only at the first (inner) third. This increases the shock absorption and comfort on the hand s outer side. Various rubber compounds ensure a perfect grip level and high comfort. SQlab only use the best possible materials. This guarantees you a long service life and no sticking of the grip rubber. The personal grip size is what matters. With the 7OX grip, the sizes differ in diameter and shape.
The SQlab 70X Grips are the ergonomic grip for pros! Perfect fit, more volume and an intelligent shape for more absorption. Gravity and downhill grip offer maximum control and grip in rough terrain, even in wet and muddy conditionsSpecial textured zone of the front and bottom side provides optimal support for the fingers in any situationVarious rubber compounds ensure a perfect grip level and high comfortSizes differ in diameter and shapeThe 70x grip offers the perfect handle ergonomics for experts. The gravity and downhill grip offer maximum control and grip in rough terrain, even in wet and muddy conditions. The scope of delivery includes one set of grips. The special textured zone of the front and bottom side provides optimal support for the fingers in any situation. The exterior side ensures the needed comfort. The clamp moved from the outside to the inside during the product development and is now only at the first (inner) third. This increases the shock absorption and comfort on the hand s outer side. Various rubber compounds ensure a perfect grip level and high comfort. SQlab only use the best possible materials. This guarantees you a long service life and no sticking of the grip rubber. The personal grip size is what matters. With the 7OX grip, the sizes differ in diameter and shape.
Introducing the SQlab 30X Handlebar, which offers a choice of a 12 or 16 degree back sweep. The 12° back sweep with its short reach provides a natural transition from the lower arm to the hand when in a more upright riding position thus protecting the wrist from the extreme strain occurring in downhill riding. The 16° Back sweep provides a natural transition from the lower arm to the hand when in a more stretched riding position.Increased Back sweep - With its short reach provides a natural transition from the lower arm to the hand.4° Upsweep - Brings the elbows into a perfect position for a dynamic riding style.31.8mm clamp diameter30mm RisePassed the Zedler End of Life test with flying colours The perfect combination of form, wall thickness and diameter with the corresponding anatomically optimized bend for various riding dynamics, currently make the new SQlab 30X handlebar series the most stable as well as the lightest bar in its field.Area of use: Gravity & e-performanceWidth in (mm): 780Shortened maximum width (mm): 720Upsweep (°): 4Stretch (mm): 0Material: AluminiumWeight (g): Approx. 325Clamping width of the stem: Min. 46mm / Max 58mm
Light, stable and withstands the force of the handlebars. If a handlebar stem were to evolve across many generations like nature s plants and continuously adapt and perfect itself over a very long period of time, then it would probably look like this.Area of use Gravity & E-bike35mm LengthWeight: 138gReach: 34.8mmHeight: 38.5mmAngle: 6°Rise: 3.7mmMaterial: AluminiumClamp width: 50mmHandlebar diameter: 31.8mmMin Head Tube Overlap: 32mmClamping: 31.8mmThe pictured SQlab Ahead Cap 1 1/8" and countersunk screw is not included
Light, stable and withstands the force of the handlebars. If a handlebar stem were to evolve across many generations like nature s plants and continuously adapt and perfect itself over a very long period of time, then it would probably look like this.Area of use Gravity & E-bike35mm LengthWeight: 138gReach: 34.8mmHeight: 38.5mmAngle: 6°Rise: 3.7mmMaterial: AluminiumClamp width: 50mmHandlebar diameter: 31.8mmMin Head Tube Overlap: 32mmClamping: 31.8mmThe pictured SQlab Ahead Cap 1 1/8" and countersunk screw is not included
Light, stable and withstands the force of the handlebars. If a handlebar stem were to evolve across many generations like nature s plants and continuously adapt and perfect itself over a very long period of time, then it would probably look like this.Area of use Gravity & E-bike35mm LengthWeight: 138gReach: 34.8mmHeight: 38.5mmAngle: 6°Rise: 3.7mmMaterial: AluminiumClamp width: 50mmHandlebar diameter: 31.8mmMin Head Tube Overlap: 32mmClamping: 31.8mmThe pictured SQlab Ahead Cap 1 1/8" and countersunk screw is not included
Introducing the excellent SQlab 612 Ergowave R Carbon Saddle. The proven SQlab Ergowave form relieves the soft tissue area and prevents energy- consuming bad posture. The saddle shell is weight and flex optimized down to the last detail. More longitudinal stiffness and perfectly coordinated material flex to the side mean more comfort with less weight at the same time. The cover is extremely light but also abrasion-resistant and non-slip. The padding is closed-cell and strongly minimised. The comfort comes from the shape and the flex behaviour between rail - shell - foam, which is coordinated as an overall system.Shorter - Narrower - Lighter - FasterMore performance based ergonomics from 125g.The raised rear gives more grip and better power transmission.A big advantage is on straight roads and especially uphill.The stronger narrower mid-section and the narrow saddle nose gives more legroom.Perfect fit - The correct width saddle is a prerequisite for maximum performance. Available width: 12 / 13 / 14 cmSleek rear - The raised rear gives more grip and better power transmission. A big advantage is on straight roads and especially uphill.Narrower - The stronger narrower mid-section and the narrow saddle nose give more legroom.Extended Dip - The slight depression in the middle of the saddle has been lengthened for a very sporty sitting position to reduce the pressure on the sensitive structures of the perineal area. Weight and flex optimised - More longitudinal stiffness and perfectly coordinated material flex to the side mean more comfort with less weight at the same time. 125g.Very sporty sitting position on the road bike and XC Saddle camber from min. 5cm raised saddleFor performance-oriented rides and races Strongly minimized, firm padding with maximum legroom From 125g
Introducing the excellent SQlab 612 Ergowave R Carbon Saddle. The proven SQlab Ergowave form relieves the soft tissue area and prevents energy- consuming bad posture. The saddle shell is weight and flex optimized down to the last detail. More longitudinal stiffness and perfectly coordinated material flex to the side mean more comfort with less weight at the same time. The cover is extremely light but also abrasion-resistant and non-slip. The padding is closed-cell and strongly minimised. The comfort comes from the shape and the flex behaviour between rail - shell - foam, which is coordinated as an overall system.Shorter - Narrower - Lighter - FasterMore performance based ergonomics from 125g.The raised rear gives more grip and better power transmission.A big advantage is on straight roads and especially uphill.The stronger narrower mid-section and the narrow saddle nose gives more legroom.Perfect fit - The correct width saddle is a prerequisite for maximum performance. Available width: 12 / 13 / 14 cmSleek rear - The raised rear gives more grip and better power transmission. A big advantage is on straight roads and especially uphill.Narrower - The stronger narrower mid-section and the narrow saddle nose give more legroom.Extended Dip - The slight depression in the middle of the saddle has been lengthened for a very sporty sitting position to reduce the pressure on the sensitive structures of the perineal area. Weight and flex optimised - More longitudinal stiffness and perfectly coordinated material flex to the side mean more comfort with less weight at the same time. 125g.Very sporty sitting position on the road bike and XC Saddle camber from min. 5cm raised saddleFor performance-oriented rides and races Strongly minimized, firm padding with maximum legroom From 125g
The perfect fit for a bike grip is crucial for comfort and grip security, this is where the 711 R Grips from SQlab come in. The grip width is the measure from the tip of the middle finger to the crook of the thumb because that is exactly how you enclose the grip. The grip sizes differ in diameter, length and shape to enhance the fit and comfort on offer.Silicon rubber compoundLight at only 59g per pairDurable with damping qualities The flattened shape on the outside increases the contact surface and thus the comfort. Material needed for a heavy wing can be saved completely. The second advantage is that the grip remains perfectly round in terms of driving dynamics. The slightly angular, flat shape on the underside saves material and provides a perfect fit. This ensures that the grip is loose and secure in the hand. The energy required for firm hand pressure is saved and arm pumping is prevented.
The perfect fit for a bike grip is crucial for comfort and grip security, this is where the 711 R Grips from SQlab come in. The grip width is the measure from the tip of the middle finger to the crook of the thumb because that is exactly how you enclose the grip. The grip sizes differ in diameter, length and shape to enhance the fit and comfort on offer.Silicon rubber compoundLight at only 59g per pairDurable with damping qualities The flattened shape on the outside increases the contact surface and thus the comfort. Material needed for a heavy wing can be saved completely. The second advantage is that the grip remains perfectly round in terms of driving dynamics. The slightly angular, flat shape on the underside saves material and provides a perfect fit. This ensures that the grip is loose and secure in the hand. The energy required for firm hand pressure is saved and arm pumping is prevented.
The perfect fit for a bike grip is crucial for comfort and grip security, this is where the 711 R Grips from SQlab come in. The grip width is the measure from the tip of the middle finger to the crook of the thumb because that is exactly how you enclose the grip. The grip sizes differ in diameter, length and shape to enhance the fit and comfort on offer.Silicon rubber compoundLight at only 59g per pairDurable with damping qualities The flattened shape on the outside increases the contact surface and thus the comfort. Material needed for a heavy wing can be saved completely. The second advantage is that the grip remains perfectly round in terms of driving dynamics. The slightly angular, flat shape on the underside saves material and provides a perfect fit. This ensures that the grip is loose and secure in the hand. The energy required for firm hand pressure is saved and arm pumping is prevented.
Light, stable and withstands the force of the handlebars. If a handlebar stem were to evolve across many generations like nature s plants and continuously adapt and perfect itself over a very long period of time, then it would probably look like this.Area of use Gravity & E-bike35mm LengthWeight: 138gReach: 34.8mmHeight: 38.5mmAngle: 6°Rise: 3.7mmMaterial: AluminiumClamp width: 50mmHandlebar diameter: 31.8mmMin Head Tube Overlap: 32mmClamping: 31.8mmThe pictured SQlab Ahead Cap 1 1/8" and countersunk screw is not included
Light, stable and withstands the force of the handlebars. If a handlebar stem were to evolve across many generations like nature s plants and continuously adapt and perfect itself over a very long period of time, then it would probably look like this. The 8OX ltd. is equipped with Titanium screws for clamping the stem to the steerer tube.Area of use: Gravity & e-performanceLength (mm): 35Weight (g): 128Reach (mm): 34.8Height (mm): 38.5Angle°: 6Rise (mm): 3.7Material: AluminiumMaterial screws: TitanClamp width (mm): 50Handlebar diameter (mm): 31.8Min. Head tube overlap (mm): 32Clamping (mm): 31.8The pictured SQlab Ahead Cap 1 1/8" and countersunk screw is not included
The perfect fit for a bike grip is crucial for comfort and grip security, this is where the 711 R Grips from SQlab come in. The grip width is the measure from the tip of the middle finger to the crook of the thumb because that is exactly how you enclose the grip. The grip sizes differ in diameter, length and shape to enhance the fit and comfort on offer.Silicon rubber compoundLight at only 59g per pairDurable with damping qualities The flattened shape on the outside increases the contact surface and thus the comfort. Material needed for a heavy wing can be saved completely. The second advantage is that the grip remains perfectly round in terms of driving dynamics. The slightly angular, flat shape on the underside saves material and provides a perfect fit. This ensures that the grip is loose and secure in the hand. The energy required for firm hand pressure is saved and arm pumping is prevented.
The 711 Tech & Trail 2.0 Grips are an ergonomic grip for long distances! Perfect fit, cushioning and comfort for the mountain bike.Perfect grip ergonomics for long-distance routes and use in racing on sports-oriented mountain bikesOffers shock absorption and comfortVarious rubber compounds ensure a perfect grip level and high comfortSQlab only use the best possible materials. This guarantees you a long service life and no sticking of the grip rubber.The 711 features perfect grip ergonomics for long-distance routes and use in racing on sports-oriented mountain bikes. A well thought-out, highly ergonomic shape offers an especially secure grip and comfort. The clamp moved from the outside to the inside during the product development. This increases the shock absorption and comfort on the hand s outer side.In addition, the outside surface area was increased using every trick in the book, making it as comfortable as a wing grip despite not being one. As round as necessary and as flat as possible: With the 711 grip, the outer contact surface is pressed flat, thus reducing the pressure peaks many times over. The grip security is supported by the Ergobar. This results in a flat, slightly angular grip bottom and offers a perfect form fit. This allows the grip to be guided loosely while still always keeping the bike under control.The advantages of the grip are particularly noticeable at the end of a tough marathon, but they also increase the fun on long tours or quick trips after work. Increased performance through perfect ergonomics. Various rubber compounds ensure a perfect grip level and high comfort. SQlab only use the best possible materials. This guarantees you a long service life and no sticking of the grip rubber. The personal grip size is what matters. With the 711 grip, the sizes differ in diameter and shape.
Sqlab's Stuby Grips offer a cutting-edge take on classic bar-ends and offer a more climbing orientated position than their aero focussed Innerbarends. If you want to maximise your climbing efficiency while having numerous hand positions for vast comfort, the Stuby Grips are for you!Unique grip/barend design allows you to pull on the outside of the handlebar for more powerUnusual shape means you grip barends further back, creating a more upright back positionCan still be used like traditional barends for a lower, sportier ride positionOffers many different grip positions despite the compact design155mm long and lightweight (from just 284g - size M)
Sqlab's Stuby Grips offer a cutting-edge take on classic bar-ends and offer a more climbing orientated position than their aero focussed Innerbarends. If you want to maximise your climbing efficiency while having numerous hand positions for vast comfort, the Stuby Grips are for you!Unique grip/barend design allows you to pull on the outside of the handlebar for more powerUnusual shape means you grip barends further back, creating a more upright back positionCan still be used like traditional barends for a lower, sportier ride positionOffers many different grip positions despite the compact design155mm long and lightweight (from just 284g - size M)