The new e-bike saddle 6OX combines the advantages of the successful saddle models Ergowave and Ergolux. As part of the product development, the shape of the saddle was adapted and perfected for the special use on the E-MTB as well as for the Gravity Bike.Perfect Fit - The correct saddle width is a key for maximum performance. Available widths in cm: 13, 14, 15, 16More free space - less pressure - The proven, outstanding SQlab staged saddle shape with the saddle nose that dips below level also provides more freedom for the 6OX and less pressure, equally so for men and for women.Perfect hold - The SQlab saddle shape with the raised seat surface is already perfectly suited for riding uphill and provides more power to the pedals on straights. Additionally, a special non-slip logo design ensures even more grip towards the back.Grip design - The grip material on the raised stage provides additional hold towards the back.Biomechanics - The proven SQlab 6OX active saddle technology provides increased efficiency for pedalling, as well as more comfort and less stress on intervertebral discs.The 6OX saddle is equipped with 3 different elastomer dampers that are tailored individually to body weight and can be interchanged as needed.The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones. The raised back section provides more rearward support and ensures efficient power transmission. The grip material on the raised back provides additional support to the rear. In addition, the saddle cover is robust, especially at the edges.The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 6OX became a little bit wider, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the E-MTB with perfect dampening properties for rough off-road terrain.Due to these modifications, the 6OX is the ideal saddle for long and steep climbs on the E-MTB and at the same time, even on bikes without an engine, it provides an optimum relief. The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones.The SQlab active-saddle technology lets the saddle follow the pedalling motion as comfort increases, the vertebral discs are mobilized and pressure on the sit bones is minimised. The correct width saddle is a prerequisite for maximum performance. Available widths: 13 cm/14 cm/15 cm/16cm.
The new e-bike saddle 6OX combines the advantages of the successful saddle models Ergowave and Ergolux. As part of the product development, the shape of the saddle was adapted and perfected for the special use on the E-MTB as well as for the Gravity Bike.Perfect Fit - The correct saddle width is a key for maximum performance. Available widths in cm: 13, 14, 15, 16More free space - less pressure - The proven, outstanding SQlab staged saddle shape with the saddle nose that dips below level also provides more freedom for the 6OX and less pressure, equally so for men and for women.Perfect hold - The SQlab saddle shape with the raised seat surface is already perfectly suited for riding uphill and provides more power to the pedals on straights. Additionally, a special non-slip logo design ensures even more grip towards the back.Grip design - The grip material on the raised stage provides additional hold towards the back.Biomechanics - The proven SQlab 6OX active saddle technology provides increased efficiency for pedalling, as well as more comfort and less stress on intervertebral discs.The 6OX saddle is equipped with 3 different elastomer dampers that are tailored individually to body weight and can be interchanged as needed.The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones. The raised back section provides more rearward support and ensures efficient power transmission. The grip material on the raised back provides additional support to the rear. In addition, the saddle cover is robust, especially at the edges.The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 6OX became a little bit wider, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the E-MTB with perfect dampening properties for rough off-road terrain.Due to these modifications, the 6OX is the ideal saddle for long and steep climbs on the E-MTB and at the same time, even on bikes without an engine, it provides an optimum relief. The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones.The SQlab active-saddle technology lets the saddle follow the pedalling motion as comfort increases, the vertebral discs are mobilized and pressure on the sit bones is minimised. The correct width saddle is a prerequisite for maximum performance. Available widths: 13 cm/14 cm/15 cm/16cm.
The 612 Ergowave Active 2.1 was specifically designed to accommodate the requirements of both competitive and leisure cyclists both on the road or mountain bike. The wave-like shape and raised rear section provides perfect rearward support and an optimal pressure distribution which reaches deep into the body structures resulting in improved power transmission. The lowered nose in combination with the dip provides optimal pressure relief for the perineal area. The flat but slim SQlab MaxContact saddle nose and the firm padding of the 612 were both specifically designed for the needs on the road bike. The SQlab active technology allows the saddle to follow the biomechanical motion when pedalling resulting in increased comfort, mobilisation of the spinal discs and reduced pressure to the sit bones. Perfect fit - For the best performance the fit is crucial. Available widths in 12 / 13 / 14/ 15cmSleek rear & lower saddle nose - The raised back section provides more rearward support and ensures efficient power transmission. The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike.Centre Dip - The slight dip in the centre of the saddle reduces pressure to the sensitive tissue areas of the perineum.Saving energy - The wave shaped Ergowave profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones. The rider does not need to be seated in an inefficient and tiring sitting position and all energy can be used for forward propulsion.Low and flat - The flat saddle nose has a slight curvature which provides maximum contact area providing and associated reduced pressure. This shape provides a narrow saddle nose which minimizes chafing on the inside of the thighs while pedalling.Relief of the intervertebral discs - SQlab s active saddle technology enables a physiologically correct movement of the pelvis. A rounder pedalling motion is achieved which provides for reduced pressure to the lumbar spine and facet joints. This can contribute to less fatigue and prevention of pain in the lumbar spine.
The 612 Ergowave Active 2.1 was specifically designed to accommodate the requirements of both competitive and leisure cyclists both on the road or mountain bike. The wave-like shape and raised rear section provides perfect rearward support and an optimal pressure distribution which reaches deep into the body structures resulting in improved power transmission. The lowered nose in combination with the dip provides optimal pressure relief for the perineal area. The flat but slim SQlab MaxContact saddle nose and the firm padding of the 612 were both specifically designed for the needs on the road bike. The SQlab active technology allows the saddle to follow the biomechanical motion when pedalling resulting in increased comfort, mobilisation of the spinal discs and reduced pressure to the sit bones. Perfect fit - For the best performance the fit is crucial. Available widths in 12 / 13 / 14/ 15cmSleek rear & lower saddle nose - The raised back section provides more rearward support and ensures efficient power transmission. The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike.Centre Dip - The slight dip in the centre of the saddle reduces pressure to the sensitive tissue areas of the perineum.Saving energy - The wave shaped Ergowave profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones. The rider does not need to be seated in an inefficient and tiring sitting position and all energy can be used for forward propulsion.Low and flat - The flat saddle nose has a slight curvature which provides maximum contact area providing and associated reduced pressure. This shape provides a narrow saddle nose which minimizes chafing on the inside of the thighs while pedalling.Relief of the intervertebral discs - SQlab s active saddle technology enables a physiologically correct movement of the pelvis. A rounder pedalling motion is achieved which provides for reduced pressure to the lumbar spine and facet joints. This can contribute to less fatigue and prevention of pain in the lumbar spine.
The new e-bike saddle 6OX combines the advantages of the successful saddle models Ergowave and Ergolux. As part of the product development, the shape of the saddle was adapted and perfected for the special use on the E-MTB as well as for the Gravity Bike.Perfect Fit - The correct saddle width is a key for maximum performance. Available widths in cm: 13, 14, 15, 16More free space - less pressure - The proven, outstanding SQlab staged saddle shape with the saddle nose that dips below level also provides more freedom for the 6OX and less pressure, equally so for men and for women.Perfect hold - The SQlab saddle shape with the raised seat surface is already perfectly suited for riding uphill and provides more power to the pedals on straights. Additionally, a special non-slip logo design ensures even more grip towards the back.Grip design - The grip material on the raised stage provides additional hold towards the back.Biomechanics - The proven SQlab 6OX active saddle technology provides increased efficiency for pedalling, as well as more comfort and less stress on intervertebral discs.The 6OX saddle is equipped with 3 different elastomer dampers that are tailored individually to body weight and can be interchanged as needed.The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones. The raised back section provides more rearward support and ensures efficient power transmission. The grip material on the raised back provides additional support to the rear. In addition, the saddle cover is robust, especially at the edges.The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 6OX became a little bit wider, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the E-MTB with perfect dampening properties for rough off-road terrain.Due to these modifications, the 6OX is the ideal saddle for long and steep climbs on the E-MTB and at the same time, even on bikes without an engine, it provides an optimum relief. The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones.The SQlab active-saddle technology lets the saddle follow the pedalling motion as comfort increases, the vertebral discs are mobilized and pressure on the sit bones is minimised. The correct width saddle is a prerequisite for maximum performance. Available widths: 13 cm/14 cm/15 cm/16cm.
The new e-bike saddle 6OX combines the advantages of the successful saddle models Ergowave and Ergolux. As part of the product development, the shape of the saddle was adapted and perfected for the special use on the E-MTB as well as for the Gravity Bike.Perfect Fit - The correct saddle width is a key for maximum performance. Available widths in cm: 13, 14, 15, 16More free space - less pressure - The proven, outstanding SQlab staged saddle shape with the saddle nose that dips below level also provides more freedom for the 6OX and less pressure, equally so for men and for women.Perfect hold - The SQlab saddle shape with the raised seat surface is already perfectly suited for riding uphill and provides more power to the pedals on straights. Additionally, a special non-slip logo design ensures even more grip towards the back.Grip design - The grip material on the raised stage provides additional hold towards the back.Biomechanics - The proven SQlab 6OX active saddle technology provides increased efficiency for pedalling, as well as more comfort and less stress on intervertebral discs.The 6OX saddle is equipped with 3 different elastomer dampers that are tailored individually to body weight and can be interchanged as needed.The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones. The raised back section provides more rearward support and ensures efficient power transmission. The grip material on the raised back provides additional support to the rear. In addition, the saddle cover is robust, especially at the edges.The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 6OX became a little bit wider, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the E-MTB with perfect dampening properties for rough off-road terrain.Due to these modifications, the 6OX is the ideal saddle for long and steep climbs on the E-MTB and at the same time, even on bikes without an engine, it provides an optimum relief. The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones.The SQlab active-saddle technology lets the saddle follow the pedalling motion as comfort increases, the vertebral discs are mobilized and pressure on the sit bones is minimised. The correct width saddle is a prerequisite for maximum performance. Available widths: 13 cm/14 cm/15 cm/16cm.
Introducing the SQlab 30X Handlebar, which offers a choice of a 12 or 16 degree back sweep. The 12° back sweep with its short reach provides a natural transition from the lower arm to the hand when in a more upright riding position thus protecting the wrist from the extreme strain occurring in downhill riding. The 16° Back sweep provides a natural transition from the lower arm to the hand when in a more stretched riding position.Increased Back sweep - With its short reach provides a natural transition from the lower arm to the hand.4° Upsweep - Brings the elbows into a perfect position for a dynamic riding style.31.8mm clamp diameter30mm RisePassed the Zedler End of Life test with flying colours The perfect combination of form, wall thickness and diameter with the corresponding anatomically optimized bend for various riding dynamics, currently make the new SQlab 30X handlebar series the most stable as well as the lightest bar in its field.Area of use: Gravity & e-performanceWidth in (mm): 780Shortened maximum width (mm): 720Upsweep (°): 4Stretch (mm): 0Material: AluminiumWeight (g): Approx. 325Clamping width of the stem: Min. 46mm / Max 58mm
Introducing the SQlab 30X Handlebar, which offers a choice of a 12 or 16 degree back sweep. The 12° back sweep with its short reach provides a natural transition from the lower arm to the hand when in a more upright riding position thus protecting the wrist from the extreme strain occurring in downhill riding. The 16° Back sweep provides a natural transition from the lower arm to the hand when in a more stretched riding position.Increased Back sweep - With its short reach provides a natural transition from the lower arm to the hand.4° Upsweep - Brings the elbows into a perfect position for a dynamic riding style.31.8mm clamp diameter30mm RisePassed the Zedler End of Life test with flying colours The perfect combination of form, wall thickness and diameter with the corresponding anatomically optimized bend for various riding dynamics, currently make the new SQlab 30X handlebar series the most stable as well as the lightest bar in its field.Area of use: Gravity & e-performanceWidth in (mm): 780Shortened maximum width (mm): 720Upsweep (°): 4Stretch (mm): 0Material: AluminiumWeight (g): Approx. 325Clamping width of the stem: Min. 46mm / Max 58mm
Introducing the SQlab 30X Handlebar, which offers a choice of a 12 or 16 degree back sweep. The 12° back sweep with its short reach provides a natural transition from the lower arm to the hand when in a more upright riding position thus protecting the wrist from the extreme strain occurring in downhill riding. The 16° Back sweep provides a natural transition from the lower arm to the hand when in a more stretched riding position.Increased Back sweep - With its short reach provides a natural transition from the lower arm to the hand.4° Upsweep - Brings the elbows into a perfect position for a dynamic riding style.31.8mm clamp diameter30mm RisePassed the Zedler End of Life test with flying colours The perfect combination of form, wall thickness and diameter with the corresponding anatomically optimized bend for various riding dynamics, currently make the new SQlab 30X handlebar series the most stable as well as the lightest bar in its field.Area of use: Gravity & e-performanceWidth in (mm): 780Shortened maximum width (mm): 720Upsweep (°): 4Stretch (mm): 0Material: AluminiumWeight (g): Approx. 325Clamping width of the stem: Min. 46mm / Max 58mm
Introducing the SQlab 30X Handlebar, which offers a choice of a 12 or 16 degree back sweep. The 12° back sweep with its short reach provides a natural transition from the lower arm to the hand when in a more upright riding position thus protecting the wrist from the extreme strain occurring in downhill riding. The 16° Back sweep provides a natural transition from the lower arm to the hand when in a more stretched riding position.Increased Back sweep - With its short reach provides a natural transition from the lower arm to the hand.4° Upsweep - Brings the elbows into a perfect position for a dynamic riding style.31.8mm clamp diameter30mm RisePassed the Zedler End of Life test with flying colours The perfect combination of form, wall thickness and diameter with the corresponding anatomically optimized bend for various riding dynamics, currently make the new SQlab 30X handlebar series the most stable as well as the lightest bar in its field.Area of use: Gravity & e-performanceWidth in (mm): 780Shortened maximum width (mm): 720Upsweep (°): 4Stretch (mm): 0Material: AluminiumWeight (g): Approx. 325Clamping width of the stem: Min. 46mm / Max 58mm
Introducing the SQlab 30X Handlebar, which offers a choice of a 12 or 16 degree back sweep. The 12° back sweep with its short reach provides a natural transition from the lower arm to the hand when in a more upright riding position thus protecting the wrist from the extreme strain occurring in downhill riding. The 16° Back sweep provides a natural transition from the lower arm to the hand when in a more stretched riding position.Increased Back sweep - With its short reach provides a natural transition from the lower arm to the hand.4° Upsweep - Brings the elbows into a perfect position for a dynamic riding style.31.8mm clamp diameter30mm RisePassed the Zedler End of Life test with flying colours The perfect combination of form, wall thickness and diameter with the corresponding anatomically optimized bend for various riding dynamics, currently make the new SQlab 30X handlebar series the most stable as well as the lightest bar in its field.Area of use: Gravity & e-performanceWidth in (mm): 780Shortened maximum width (mm): 720Upsweep (°): 4Stretch (mm): 0Material: AluminiumWeight (g): Approx. 325Clamping width of the stem: Min. 46mm / Max 58mm
The SQlab 611 Ergowave Saddle was precisely designed to accommodate the requirements of off-road cycling and perfectly meet the demands of All Mountain and Enduro use. Designed specifically for use on all mountain and enduro mountain bikesWave shape with raised rear section is perfect for efficient power transferLowered nose is 4mm wider than 612 and provides optimal relief for the perineal area280mm in length to give maximum range of movement when climbing and descendingSolid CrMo rails and PU Light foam padding keep weight down to just 244g (12cm size)The 611 Ergowave CrMo features a wave-like shape and raised rear section provides that perfect rearward support and optimal pressure distribution for improved power transmission. The lowered nose in combination with the dip provides optimal pressure relief for the perineal area. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 611 was made approximately 4 mm wider than that of the 612, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the MTB with better dampening properties than the 612 making it perfect for rough off-road terrain. Additionally, a premium quality Kevlar material protects the saddle in the exposed places. Due to its flex properties, the saddle is most comfortable up to 75 kg. The maximum load should not exceed 90 kg. If you want a supremely comfortable saddle for your all mountain or enduro bike, look no further than the SQlab 611 Ergowave!
The SQlab 611 Ergowave Saddle was precisely designed to accommodate the requirements of off-road cycling and perfectly meet the demands of All Mountain and Enduro use. Designed specifically for use on all mountain and enduro mountain bikesWave shape with raised rear section is perfect for efficient power transferLowered nose is 4mm wider than 612 and provides optimal relief for the perineal area280mm in length to give maximum range of movement when climbing and descendingSolid CrMo rails and PU Light foam padding keep weight down to just 244g (12cm size)The 611 Ergowave CrMo features a wave-like shape and raised rear section provides that perfect rearward support and optimal pressure distribution for improved power transmission. The lowered nose in combination with the dip provides optimal pressure relief for the perineal area. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 611 was made approximately 4 mm wider than that of the 612, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the MTB with better dampening properties than the 612 making it perfect for rough off-road terrain. Additionally, a premium quality Kevlar material protects the saddle in the exposed places. Due to its flex properties, the saddle is most comfortable up to 75 kg. The maximum load should not exceed 90 kg. If you want a supremely comfortable saddle for your all mountain or enduro bike, look no further than the SQlab 611 Ergowave!
The SQlab 611 Ergowave Saddle was precisely designed to accommodate the requirements of off-road cycling and perfectly meet the demands of All Mountain and Enduro use. Designed specifically for use on all mountain and enduro mountain bikesWave shape with raised rear section is perfect for efficient power transferLowered nose is 4mm wider than 612 and provides optimal relief for the perineal area280mm in length to give maximum range of movement when climbing and descendingSolid CrMo rails and PU Light foam padding keep weight down to just 244g (12cm size)The 611 Ergowave CrMo features a wave-like shape and raised rear section provides that perfect rearward support and optimal pressure distribution for improved power transmission. The lowered nose in combination with the dip provides optimal pressure relief for the perineal area. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 611 was made approximately 4 mm wider than that of the 612, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the MTB with better dampening properties than the 612 making it perfect for rough off-road terrain. Additionally, a premium quality Kevlar material protects the saddle in the exposed places. Due to its flex properties, the saddle is most comfortable up to 75 kg. The maximum load should not exceed 90 kg. If you want a supremely comfortable saddle for your all mountain or enduro bike, look no further than the SQlab 611 Ergowave!
The SQlab 611 Ergowave Saddle was precisely designed to accommodate the requirements of off-road cycling and perfectly meet the demands of All Mountain and Enduro use. Designed specifically for use on all mountain and enduro mountain bikesWave shape with raised rear section is perfect for efficient power transferLowered nose is 4mm wider than 612 and provides optimal relief for the perineal area280mm in length to give maximum range of movement when climbing and descendingSolid CrMo rails and PU Light foam padding keep weight down to just 244g (12cm size)The 611 Ergowave CrMo features a wave-like shape and raised rear section provides that perfect rearward support and optimal pressure distribution for improved power transmission. The lowered nose in combination with the dip provides optimal pressure relief for the perineal area. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 611 was made approximately 4 mm wider than that of the 612, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the MTB with better dampening properties than the 612 making it perfect for rough off-road terrain. Additionally, a premium quality Kevlar material protects the saddle in the exposed places. Due to its flex properties, the saddle is most comfortable up to 75 kg. The maximum load should not exceed 90 kg. If you want a supremely comfortable saddle for your all mountain or enduro bike, look no further than the SQlab 611 Ergowave!
Light, stable and withstands the force of the handlebars. If a handlebar stem were to evolve across many generations like nature s plants and continuously adapt and perfect itself over a very long period of time, then it would probably look like this. The 8OX ltd. is equipped with Titanium screws for clamping the stem to the steerer tube.Area of use: Gravity & e-performanceLength (mm): 35Weight (g): 128Reach (mm): 34.8Height (mm): 38.5Angle°: 6Rise (mm): 3.7Material: AluminiumMaterial screws: TitanClamp width (mm): 50Handlebar diameter (mm): 31.8Min. Head tube overlap (mm): 32Clamping (mm): 31.8The pictured SQlab Ahead Cap 1 1/8" and countersunk screw is not included
Light, stable and withstands the force of the handlebars. If a handlebar stem were to evolve across many generations like nature s plants and continuously adapt and perfect itself over a very long period of time, then it would probably look like this.Area of use Gravity & E-bike35mm LengthWeight: 138gReach: 34.8mmHeight: 38.5mmAngle: 6°Rise: 3.7mmMaterial: AluminiumClamp width: 50mmHandlebar diameter: 31.8mmMin Head Tube Overlap: 32mmClamping: 31.8mmThe pictured SQlab Ahead Cap 1 1/8" and countersunk screw is not included
Light, stable and withstands the force of the handlebars. If a handlebar stem were to evolve across many generations like nature s plants and continuously adapt and perfect itself over a very long period of time, then it would probably look like this.Area of use Gravity & E-bike35mm LengthWeight: 138gReach: 34.8mmHeight: 38.5mmAngle: 6°Rise: 3.7mmMaterial: AluminiumClamp width: 50mmHandlebar diameter: 31.8mmMin Head Tube Overlap: 32mmClamping: 31.8mmThe pictured SQlab Ahead Cap 1 1/8" and countersunk screw is not included
Light, stable and withstands the force of the handlebars. If a handlebar stem were to evolve across many generations like nature s plants and continuously adapt and perfect itself over a very long period of time, then it would probably look like this.Area of use Gravity & E-bike35mm LengthWeight: 138gReach: 34.8mmHeight: 38.5mmAngle: 6°Rise: 3.7mmMaterial: AluminiumClamp width: 50mmHandlebar diameter: 31.8mmMin Head Tube Overlap: 32mmClamping: 31.8mmThe pictured SQlab Ahead Cap 1 1/8" and countersunk screw is not included
Light, stable and withstands the force of the handlebars. If a handlebar stem were to evolve across many generations like nature s plants and continuously adapt and perfect itself over a very long period of time, then it would probably look like this.Area of use Gravity & E-bike35mm LengthWeight: 138gReach: 34.8mmHeight: 38.5mmAngle: 6°Rise: 3.7mmMaterial: AluminiumClamp width: 50mmHandlebar diameter: 31.8mmMin Head Tube Overlap: 32mmClamping: 31.8mmThe pictured SQlab Ahead Cap 1 1/8" and countersunk screw is not included