The Hoder High bar is made in the USA from post weld heat treated 4130 and features a larger 9" rise. The Hoder Highs featuring the great S&M quality as we have come to expect like stronger dual radius bends and a tougher big box design which means the cross bar is a little higher than usual to add support to these lager bars. ###section### Product Specs Rise: 9" Width: 30" Up Sweep: 1.5 ° Backsweep: 11 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 1011g / 2.23lbs ###section### ###shogun-image-section###
Charlie Crumlish signature bars from S&M. These are the largest 4 piece handlebar available featuring a large 10" rise and 30" width. The Fu-Bar is made in the USA from American 4130 CrMo. ###section### Product Specs Rise: Multiple Options Width: 30" Up Sweep: 1.5 ° Backsweep: 10 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 1215g / 2.68lbs ###section### ###shogun-image-section###
Massive 10" rise, 30" wide handlebars from S&M. The perfect 10" bar is made in the USA from American 4130 CrMo. ###section### Product Specs Rise: 10" Width: 30" Up Sweep: 1.5 ° Backsweep: 11 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 1224g / 2.7lbs ###section### ###shogun-image-section###
OG Slam Bars from S&M featuring original slam and shield stickers as well as S&M's custom roll mark. Hand made in the USA from dual radius true temper 4130 tubing. ###section### Product Specs Rise: 8" Width: 28" Up Sweep: 1 ° Backsweep: 12 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 2.0 lb (.91 kg) ###section### ###shogun-image-section###
The S&M Slidepipe V2 is a heavy-duty, portable BMX rail designed and built to withstand the rigors of even the heaviest street riders. Oversized, steel bases and commercial-grade, rubber feet keep the rail firmly in place while uprights made from square, steel tubing won't allow bases to twist, even without hardware. The super-strong, extruded, center connector has a thick spine featuring tapped threads that won't pull out, plus a reinforcement plate that spans all four connecter bolts for added strength. 8' long by 18" tall assembled, weighs 62 lbs.
Classic Slam 8" Rise handlebar from S&M. Made from straight gauge tubing and fully 4Q baked, these bars have the classic geometry as the original slam bar and come with a lifetime warranty. ###section### Product Specs Rise: 8" Width: 28" Up Sweep: 1 ° Backsweep: 12 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 907g / 2lbs ###section### ###shogun-image-section###
These bars feature a large 8" rise and geometry similar to a Slam bar. The bars however are super light at 1.6lbs and feature a thinner cross bar. The bars are multi butted and have undergone the full 4Q baked heat treating process. ###section### Product Specs Rise: Multiple Options Width: 28" Up Sweep: 1 ° Backsweep: 12 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 725g / 1.6lbs ###section### ###shogun-image-section###
Mike Hoder signature handlebar from S&M. The Hoder bar is made in the USA from post weld heat treated and butted 4130 and features a large 8.625" rise and a wide 30" width. ###section### Product Specs Rise: 8.625" Width: 30" Up Sweep: 1.5 ° Backsweep: 11 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 966g / 2.13lbs ###section### ###shogun-image-section###
The original S&M Redneck stem came out in 1992. CNC machined from a solid billet of 7075-T6 aluminium with ‘REDNECK’ engraved across the top, it only came in red (‘Redneck’ – simple) and like the rest of S&M’s products was proudly made in the USA. S&M have reissued the legendary Clamp on Redneck Stems in its original form and a variety of colours. Anyone who was anyone defiantly rocked one of these in the 90’s and they’re still a much wanted item today! This is a shafted version for one inch threaded forks. ###section### Product Specs TYPE: Front Load REACH: 53mm RISE: 5mm / inverted 27mm CLAMPING DIAMETER: 22.2mm WEIGHT: 1 lb 7 oz / .64 kg
The Hoder SkyHigh Bar, just in case the Hoder and Hoder High bars don't get you high enough. Made in the USA from post weld heat treated 4130 and features a larger 9.5" rise. The Hoder Highs featuring the great S&M quality as we have come to expect like stronger dual radius bends and a tougher big box design which means the cross bar is a little higher than usual to add support to these lager bars. ###section### Product Specs Rise: 9.5" Width: 31" Up Sweep: 1.5 ° Backsweep: 11 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 1224g / 2.70lbs ###section### ###shogun-image-section###
Massive 11" rise, 30" wide handlebars from S&M. The Elevenz bar is made in the USA from American 4130 CrMo. ###section### Product Specs Rise: 11" Width: 30" Up Sweep: 3 ° Backsweep: 11 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 1301g / 2.87lbs ###section### ###shogun-image-section###
Dave Krone signature bar from S&M made from durable 4130 straight gauge chromoly. Made in USA! ###section### Product Specs Rise: 9.25" Width: 30" Up Sweep: 2° Backsweep: 12° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 2.5 lb ###section### ###shogun-image-section###
The S&M Hoder Superhigh Bars are American made from straight gauge .083" thick 4130 chromoly tubing. Dual radius bends featuring a large top bend drastically increase strength while simple aesthetics keep things looking modern. ###section### Product Specs Rise: 9.75" Width: 31" Up Sweep: 1.5° Backsweep: 11° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: TBC ###section### ###shogun-image-section###
###section### Product Specs Rise: 9.125" Width: 29" Up Sweep: 2° Backsweep: 11° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 2.40lbs ###section### ###shogun-image-section###
Clint Reynolds signature handlebar from S&M. The Credence bar is made in the USA from post weld heat treated and 4130 and features a large 8.7" rise with a thin crossbar and larger bends at the top to increase strength. ###section### Product Specs Rise: 8.7" Width: 29" Up Sweep: 3 ° Backsweep: 11 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 966g / 2.13lbs ###section### ###shogun-image-section###
Tough guard sprocket from S&M. This sprocket is 3D machined from 7075 T-6 aluminum and features an engraved S&M logo and 2 crank bolt positions for prolonged life. Come with 19mm and 22mm steel hat washers. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 167g / 5.9oz
Race specific bars from S&M. Made from 4130 chromoly in the USA. Classic 2 piece design and wighing in at just 1.6 lbs. ###section### Product Specs Rise: 5" Width: 29" Up Sweep: 4° Backsweep: 8° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 1.6 lb (.73 kg) ###section### ###shogun-image-section###
Made in USA from CNC machined 7075 T6 Aluminum. 1/8″ teeth, 15/16″ (24mm) center bore, 19 and 22mm steel hat washers included. Compatible with 19mm, 22mm and 24mm spindles. Features 2 crank mounting holes.
Butted 4130 CrMo S&M Bruiser Race bars made in the USA with 4Q Baked heat-treating process. ###section### Product Specs Rise: 6.5" Width: 29" Up Sweep: 4° Backsweep: 8° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 1.5 lb (.68 kg) ###section### ###shogun-image-section###
S&M's most popular cruiser bars. Made from 4130 chromoly in the USA. Classic 2 piece design and wighing in at just 1.6 lbs. ###section### Product Specs Rise: 5.75" Width: 29" Up Sweep: 4° Backsweep: 8° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 1.6 lb (.73 kg) ###section### ###shogun-image-section###