Dura-Ace R9100 STI are lightweight thanks to carbon fibre lever blades, carbon composite bracket body, and a titanium clamp band / fixing bolt. Shift cables routed under the bar tape using Polymer coated inner wires make for a smooth shift action, providing faster, lighter shifting. Vivid Index shifting with short stroke to the release levers gives a quick and accurate shift. Gear shift cables can either be routed round the front or rear of the handlebar to suit all rider preferences. Ergonomic shift arc follows natural hand movement with inward shift stroke distance reduced for rapid and precise gear changes. Small volume ergonomically designed smooth lever hoods for added comfort. Brake lever pivots have been positioned to increase power and improve ergonomics when riding on the hoods. Finely tuneable reach adjusters for the levers enable custom fitment for all hands. Please note: Cables sold separately.
The lightweight carbon body of these components provides a large shoe contact area to maximise power transfer and support whilst reducing weight. Their wide flat profile gives better road clearance and cornering, also allowing wider bearing placement for increased rigidity and uniform load distribution. The Shimano R9100 Pedals provide a low profile 8.8mm body height from the axle centre to the cleat contact surface and a silky smooth 3-bearing axle system. Plus, there's a wide roller-bearing stainless steel pedal body plate for increased durability. In addition to this, the open design of the Shimano Dura-Ace R9100 pedals allows for easy access and cleat adjustments, while their wider shoe cleat has a long life and is easier for walking than other cleats. Finally, their large binding target allows quick engagement and wide cleats provide more efficient pedalling. There are three types of shoe cleats available: fixed, 3 degrees of float in each direction, or 3 degrees of float from a font-centre pivot.
Optimised for use with hard-riding 10-speed road bikes, this quality-built cassette is mainly aimed at racing juniors and lower teeth. Equipped with Hyperglide sprockets, computer designed for specific configurations, a smooth and reliable shift is assured, even under extreme pressures and conditions.
The tactile buttons of these Shimano Di2 TT shifters allow effortless and comfortable shifting even when your hands are cold These switches give the added option of being able to operate the gears from either the aero extension or the ST-9071 Dual Control brake levers (sold separately).
The internal toggle mechanism provides greater clearance for larger tyres and it now features a built in cable tension adjustment bolt meaning there is no need for inline barrel adjusters.
This Shimano XTR M980 HollowTech II bottom bracket assembly is perfect for use with Shimano's XTR M980/M985 chainsets. It includes left and right-hand cups, spacers, an inner cover, and inner O-rings. Compatible in all 68/73mm bottom bracket shells, this particular model also features a fully sealed design, so you won't need to worry about water or dirt getting in and affecting performance. Technologies: - Compatible with 68 mm and 73 mm shell. - Durable black anodised finish. - Easy installation. - Fits M980 and M985 chainsets. - Also referred to as the SM-BB93. Manufacturer's Part Number: BB93B
This stunning direct mount compatible Shimano Deore XT M786 rear derailleur is specifically designed for 10 speed drivetrains as it offers reliable and precise shifting with a stiff and lightweight open design. Its super low profile and direct cable routing reduce the risk of damage from trail side hazards, so you won't have to worry about rocks and tree roots while riding. Plus, it uses a chain stabilising switch which reduces chain bounce in rough terrain conditions, maintaining a more stable drive and shifting experience. The Shimano Deore XT M786 Shadow Plus rear derailleur is a perfect choice of replacement for your old or worn-out existing model, so you can get back to enjoying smoother and more accurate gearing performance all over the mountain. Technologies: Shadow+: This technology provides a less distracting, quiet drivetrain as the rear derailleur stabiliser reduces chain slap. A simple solution for chain drop, which is lighter and more efficient than roller type chain devices.
The 9170 shifters feature an ideal ergonomic shape that is comfortable in the hand and similar in size to mechanical braking versions of the shifter. The shift paddles now also feature a more defined "click" for confidence in shifting and to prevent mis-shifts. E-Tube compatibility means that the shift paddles can be customised to suit the rider. The 9170 shifters now include Synchro-shift technology that automatically moves the rear derailleur when the front ring is changed or moves the front derailleur with the rear shifts to optimise chainline and drivetrain efficiency. The 9170 brake calipers have been tuned to perform optimally in road racing conditions. They feature the Shimano Flat Mount system for a sleek and aerodynamic profile and Ice Tech pads for improved heat dissipation. This kit comes pre-bled and ready to use with shifter, hose, caliper and pads.
This Shimano Di2 cable is required to connect the junction (either SM-JC40 external or SM-JC41 internal - sold separately) to the shifters, rear derailleur, front derailleur, battery and to the handlebar battery indicator junction box. In an Ultegra Di2 system, there is a fully removable individual Shimano Di2 E-Tube cable system from the battery indicator junction box enabling fine-tuning with the correct cable length to each component for easy and tidy fitment. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching but provides effortless gear shifts.
Replacement front and side name plates for use with Ultegra STi levers.
These mountain bike clipless pedals have sealed cartridge bearing spindles, which keep out water and mud for a smooth action and lasting durability. Uses the SH-51 Cleats: https://www.wiggle.co.uk/shimano-spd-mtb-cleats
This quality-crafted pack of bolts is perfectly made for use with Shimano Dura-Ace FC-7710 track chainset, attaching directly on to its single-speed chainring for a safe and secure performance.
The Dura-Ace 9100 brake has been developed to offer greater tyre clearance for up to 700x28c tyres while still maintaining the aerodynamic advantage of previous editions. It's now also up to 43% stiffer than previous Shimano Dura-Ace rim brakes and offers a linear braking curve for improved feel and function. Plus, the quick release (QR) arm now tucks in toward the main body when closed for improved aerodynamics.
For best shifting performance please take a note of the matching outer ring this inner ring need to be paired with.
With better and more comfortable brake hoods and a Style that follows the 105, Ultegra and Dura-Ace models, the Shimano Tiagra 4700 STI levers provide virtually effortless and accurate shifting operation. Ergonomic in design for a comfortable feel in the hands, they have a grey finish to match the rest of the Tiagra 4700 range.
Precision engineered Dura-Ace 7710 Bottom bracket for Track Octalink splined system.
Available in resin and metal compounds, these Shimano XTR brake pads will restore your mountain bike's (MTB's) braking performance so you can hit the trails with confidence. Metal Pad Features: Metal pads have consistently high stopping power and perform well in dry or wet conditions, alongside excellent durability. Radiator Fin - provides long pad life and less fade by cooling technology Rigid compound Longer service life High power in severe conditions Designed for muddy and sandy conditions Resin Pad Features: Resin pads make less noise than metal pads and offer better modulation. Radiator Fin - provides long pad life and less fade by cooling technology Flexible compound Less noise Focus on controllable performance Designed for dry and wet conditions
The Shimano Deore XT M8000 rear derailleur delivers reliable and precise shifting with a stiff and lightweight open design. Its Shadow cage has a slant angle that’s been optimised for use with larger sprockets and it features a super low profile design that reduces the risk of damage. The Shadow Plus system uses a chain stabilising switch that when on, reduces chain bounce in rough terrain maintaining a more stable drive and reliable shifting. This can be switched off to remove the wheel. The Direct Mount system on the Shimano Deore XT M8000 rear derailleur 11 Speed model gives you more space around the rear frame dropout. This results in easier rear wheel removal but also allows frame designers to shorten chain stays, increase axle sizes and move suspension pivots.
Fitting new brakes or completely overhauling your bike's brake cables couldn't be easier as this Shimano brake cable kit has everything you need in one pack. The brake inner cables are dual-ended, so can be used on road or mountain bike (MTB) applications.
Dyna-Sys is Shimano's next-generation MTB 10-speed drivetrain system and the Shimano HG81 10-speed cassette benefits from this to bring you an ultra-efficient drivetrain. Its sprockets have a spider arm for the three low sprockets and all the sprockets benefit from HyperGlide (HG) technology. Cassette Ratios: 11-13-15-17-19-21-23-26-30-34T 11-13-15-17-19-21-24-28-32-36T