Unmatched protection from mud and spray. The perfect guard for enduro or downhill racers and essential for weekend warriors seeking the very best protection. ProGuard maximises tyreclearance and reduces mud clogging unlike other mudguards of this style. 3 sizes: Mini: Ideal for good all-year-round good protection that’s more discreet, Standard: Superb coverage and protection, Max: 21mm longer than standard at the front and 68mm longer at therear. Offers the very best levels of protection,. Specification: Longer front minimises high speed spray,Fork brace indent allows for greater tyre clearance,Slots and holes for easy installation with cable ties (included) or velcro straps (sold separately),Rear flick offers even more protection especially whilst cornering,Seal protection increased with our acclaimed Seal Shield design,Compatible with 26”, 27.5” and 29” forks (reverse arch not compatible) with tyres up to 3”,Made with RRP’s unique polypropylene mix which gives great flexibility, durability and strength,Matte textured finish with gloss highlights, plus sticker recess for easy fit and sticker protection,Designed, manufactured and packed in the UK,Mini: 100g, Standard: 119g, Max: 133g.
The RRP ProGuard Bolt-On Mudguard is designed to keep water and mud out of your eyes and off your clothes as well as helping to protect your fork stanchions and wiper seals from getting hammered by mud, dirt and water at high velocity from your front wheel. This helps to minimise cleaning post ride and maximise intervals between services. Bolt on mudguard for selected Fox, Marzocchi, Ohlins and SR Suntour ForksTough polypropylene construction for years of serviceHeight adjustable by 6mmOnly suitable for bikes with disc brakesStandard size is 115mm longer for improved protectionConstructed from a thick Polypropylene material, the ProGuard features a bolt on design that is compatible with a wide range of Fox, Marzocchi, Ohlins and SR Suntour Suspension forks, with 6mm of height adjustment to get the perfect fit. The ProGuard Bolt-On is compatible with 26, 27.5 and 29 inch wheels and tyres up to 3 inches wide. The Standard version of the guard is perfect for extremely wet conditions, with 115mm of extra protection keeping the crud at bay. Light, easy to fit and offering excellent protection, the RRP ProGuard Bolt-On is perfect for keeping the spray and mud out of your eyes during wet winter rides.Compatibility:Fox 32, 34, 36, 49 forks - STD & BOOST (doesn t fit FOX 40 in 26 or 27.5 )Newer Marzocchi forks (using FOX chassis)Ohlins forksMost SR Suntour forks (may require additional sleeve - sold separately)
The RRP ProGuard Bolt-On Mudguard is designed to keep water and mud out of your eyes and off your clothes as well as helping to protect your fork stanchions and wiper seals from getting hammered by mud, dirt and water at high velocity from your front wheel. This helps to minimise cleaning post ride and maximise intervals between services. Bolt on mudguard for selected Fox, Marzocchi, Ohlins and SR Suntour ForksTough polypropylene construction for years of serviceHeight adjustable by 6mmOnly suitable for bikes with disc brakesStandard size is 115mm longer for improved protectionConstructed from a thick Polypropylene material, the ProGuard features a bolt on design that is compatible with a wide range of Fox, Marzocchi, Ohlins and SR Suntour Suspension forks, with 6mm of height adjustment to get the perfect fit. The ProGuard Bolt-On is compatible with 26, 27.5 and 29 inch wheels and tyres up to 3 inches wide. The Standard version of the guard is perfect for extremely wet conditions, with 115mm of extra protection keeping the crud at bay. Light, easy to fit and offering excellent protection, the RRP ProGuard Bolt-On is perfect for keeping the spray and mud out of your eyes during wet winter rides.Compatibility:Fox 32, 34, 36, 49 forks - STD & BOOST (doesn t fit FOX 40 in 26 or 27.5 )Newer Marzocchi forks (using FOX chassis)Ohlins forksMost SR Suntour forks (may require additional sleeve - sold separately)
ProGuard BOLT-ON is the first large direct-mount mudguard of its type. It offers outstanding protection from mud and spray, and provides a slick factory look thanks to not requiring zip ties or velcro straps to secure it in place.Key Features: 2 sizes: Standard offers high levels of protection. Mini is ideal for all year round offering good protection that’s more discreet, Easy to install or remove with no zip ties or velcro straps, Height adjustability by 6mm and angle adjustability for better fit if needed via 2 tilt brackets supplied, 2 Thick rubber pads on the sides protect your forks, Matte textured finish with gloss highlights, plus sticker recess for easy fit and sticker protection, Long front to protect from high speed mud and spray, Smaller turn down at front for better tyre clearance and to reduce mud blockages, Long rear with flick design offers more protection especially during cornering, Seal Shield increases protection and extends fork service intervals, Made with RRP’s unique polypropylene mix which gives great flexibility, durability and strength, Standard: 130g, Mini: 104g,.Designed for the forks listed below that have a threaded hole in the rear of the fork brace: FOX 32, 34, 36, 49 - Std & Boost (not FOX 40 in 26” or 27.5” without adapter bracket), New Marzocchi forks (using the FOX chassis), Ohlins forks, SR Suntour (models with unthreaded straight through hole in the fork brace require a Sleeve Pack to mount ProGuard BOLT-ON (sold separately), Designed, manufactured and packed in the UK.
RRP BEARING PRESSPLEASE NOTE THAT ALL ADAPTORS FOR THIS PRESS ARE SOLD SEPERATELY DUE TO THE LARGE VARIETY OF OPTIONSDesigned for the home mechanic. This simple and effective bearing press will extract and insert linkage bearings with ease. Thanks to a CNC construction this tool is ultra durable. A wide range of adaptors are available to suit almost any linkage bearing. (Sold Separately see below)The bearing press and adaptors are supplied separately so you can customize the bearing press kit to suit your requirements for greater value for money. Adaptor kits are supplied with full extraction and insertion fittings.For more information on adaptor kits see the size guide tabExtracting Bearings (RED adaptors) - SOLD SEPARATELYPlace the RED adaptors from your RRP BEARING KIT as shown below take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame. In particular check that the female adaptor cup is flush on the frame to prevent frame damage.Wind on the main handle until the parts all come together make a final check that everything is aligned properly. Continue to wind on the main handle which will allow the male adaptor to pull on the inner race of the bearing and extract it into the female adaptor cup (NB: The male adaptor passes through the female adaptor to ensure a uniform and true extraction*) it will become harder to turn once the bearing starts to extract. After a couple of turns stop and check that the bearing is extracting properly before continuingInserting Bearings (BLUE adaptors) - SOLD SEPARATELYPlace the BLUE adaptors from your RRP BEARING KIT as shown below take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame.Wind on the main handle until all the parts come together the male adaptor should be pressing on the outer race of the bearing you are inserting. Make a final check that everything is all aligned. Continue to wind on the main handle the male adaptor will press onto the outer race of the bearing and insert it (NB: The male adaptor passes through the female adaptor to ensure a uniform and true insertion*) it will become harder to turn once the bearing starts to insert. After a couple of turns stop and check that the bearing is inserting properly before continuingGeneral InformationALL BEARING KIT ADAPTORS ARE SOLD SEPARATELY.The BPET is only suitable for frames with flat surfaces to press against. This tool is designed for the competent home mechanic who has reasonable knowledge and experience of working on bikes. This tool is designed to extract and insert linkage bearings however the tool can also be used to press and extract bearings on hubs and freehub bodies(NB: the handle arms have been reduced in length and thickness to decrease the torque available reducing the risk of damage from misalignment / incorrect installation)*Bearing Kits 1 2 & 3 don’t have male adaptors (just female ones) due to the small size of the bearing bore hole