The Turbine R is infinitely adjustable to any height thanks to its silky smooth, reliable mechanical actuation. Mounting a saddle and getting your saddle position dialed is easy as pie thanks to the user friendly zero offset seatpost clamp. 4 travel lengths (from 100mm to 175mm) are possible and this post uses standard shifter cable and housing. You know, just to keep things real. Specification:Lever ActuationMechanical,Head TypeZero Offset - 2 Bolt,Includes:Post only,Colour:Black,Weight:545g.
Key Features: Standard 6806 retainer bearings,Bearings are external to the BB shell resulting in a stiffer wider stance,Bearings are factory filled with Phil wood grease,Cups are machined for a high tolerance frame fit,. Specification: Built for: XC/AM/FR/DH,Compatibility: PF30 BB Shells.
Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you. Key Features: Manufactured from cold drawn, 7075 Aluminium.,35 optimized triple butted design.,Turned up to Rally control with 780 or 800mm width.,Rise sizes to for every build and preference 10 / 20 / 35mm.,Stealth black on black decals to match every frame colour.,. Specification: Colour: Black.,Built For: Aggressive Trail / AM / Enduro.,Sweep: 8° Backward, 5° Upward.,Bar Diameter: 35mm.,Rise: 10mm.,Weight: 300g (20mm rise).,Width: 800mm..
Race Face Single Rings - Now with performance enhancing chain retention technology. Burly enough for DH Racers and Dirt Jumpers, yet light enough for XC / singlespeed. Single Rings are machined from 7075 aluminum and tested in some of the most punishing riding terrain - Built to last.FeaturesNarrow Wide tooth profiling ensures ultimate chain retention.,Stiff 4mm plate thickness and I-beam construction transfer loads without flexing.,7075-T6 aluminum, aerospace grade strength.,Reversible laser etched graphics.,Compatible for 9, 10 and 11 speed..SpecificationSizes: 30, 32, 34, 36, 38, 104 BCD (4 bolt).,Weights: 37-57g (36T: 50g)..
Trail riding can be tough on your gear. The ends of your cranks take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!Protective rubber boots to fit over the end of your Next SL G4 carbon crank arms,2 pack.
Key Features:Replacement Race Face chainring bolt and nut set,For use with Poly Bashguards only,12mm,Pack of 4.
Built on the industry leading FOX Transfer, the new Turbine R dropper brings you the function and reliability you deserve with Race Face aesthetics to complete your R series build. Combine the Turbine R dropper with our Turbine R and Next R components - cranks, stems, wheels and bars - for that full Rally ready ride!Key Features:Colour: Black,Built For: XC/Trail/AM/Enduro,Weight: 545g (30.9x456x150mm w/o Lever),Length: 456mm, 406mm, 356mm,Travel: 150mm, 125mm, 100mm,Lever Actuation: Mechanical,Head Type: Zero Offset,Size: 31.6mm, 30.9mm,Race Face 1x Lever or Universal Lever compatible.,Compatible with Matchmaker..
Key Features:Compatible with 2x setups.,Made from forged and machined 6061-T6 Aluminium for high strength and light weight.,Textured non-slip thumb pad for not slipping thumbs.,Optimized for Race Face Turbine R and FOX Transfer dropper posts, but will actuate others (11mm of cable pull max).,Fits: Turbine R Dropper, Fox Transfer.
The Ride flat & riser bars offer Race Face engineering & quality at a value price point.Key Features:Manufactured from cold drawn, seamless 6061 material.,Shot peened for increased fatigue life.,Gradual external swaging & internal taper give increased strength & durability without adding weight.,The RIDE flat & riser bars offer Race Face engineering & quality at a value price point..Specification:Colour: Black.,Built For: XC / Trail.,Sweep: 5° rearward, 6° upward.,Bar Diameter: 31.8mm.,Rise: 1".,Weight: 325g.,Width: 710mm..
The Race Face Cinch BB104/107 bottom bracket works with all Race Face, Shimano and select FSA 24mm diameter spindle cranksets - both road and MTB - in 41mm diameter Press-Fit (Shimano Type) BB Shell Frames.Key Features:Precision CNC machined and anodized aluminium alloy cups:,More accurate, durable and stable press-fit interfaces than the competitors' moulded plastic parts.,Serviceable bearing design.,Built for: XC / AM / ROAD,Weight 95g,.Compatibility: Fits any of the following 41mm diameter Press-Fit BB Shells:BB92 (92mm Asymmetric MTN),BB89.5 (89.5mm Symmetric MTN),BB86.5 (86.5mm Symmetric ROAD).
Allows use of all Race Face, Shimano and select FSA 24mm diameter spindle cranksets (MTN or ROAD) in 41mm diameter Press-Fit (Shimano Type) BB Shell Frames. Key Features: Precision CNC machined and anodized aluminium alloy cups.,More accurate, durable and stable press-fit interfaces than the competitors' molded plastic parts.,Serviceable bearing design.,. Specification: Built for: XC / AM / ROAD,Compatibility: Fits any of the following 41mm diameter Press-Fit BB Shell, BB92 (92mm Asymmetric MTN),BB89.5 (89.5mm Symmetric MTN),BB86.5 (86.5mm Symmetric ROAD), ..
The all new AEffect 35 handlebar is designed to handle all-round trail riding at a XC weight and attractive pricepoint. Key Features: Manufactured from cold drawn, seamless 2014 Aluminium.,Shot peened for increased fatigue life.,35 optimized triple butted design.,. Specification: Built for: XC / Trail.,Dimensions: 760mm width, 8° rearward, 5° upward,Rise: 20mm.,Bar Diameter: 35mm.,Weight: 335g.,Colour: Black..
Race Face bottom brackets for use with 30mm spindle cranksets in the Race Face CINCH crank family.FeaturesAllows the use of a CINCH 30mm spindle crankset with Shimano press fit shells.,Installed using a standard bearing press tool.,Includes inner plastic sleeve and spacer; additional BB fitments can be accommodated with CINCH,spacer kits.,Inner sleeve protects against water.,Rubber seal located on the bearing's external side helps to reduce the risk of water penetration.,BB Shell Width (mm): 92mm.,Bottom Bracket Shell I.D.: 41,BB/Frame Interface: BB89.5,BB/Frame Interface: BB92,Weight: 69g.
Replacement Race Face full spindle rebuild kitKit Includes:1 x 3.5mm elastomer,1 x plastic 1mm spacer,1 x black rubber 1mm spacer,1 x red rubber 1mm spacer,.For use with:Atlas (2012),Atlas FR,Respond,Diabolus,Ride DH.
A slightly modified profile gives these trail bars the extra boost you're looking for at high speeds. Built for tearing your favourite trail. Fast.Generous 780mm width to give you the stance and control you need. This is a no nonsense, set and forget bar that is equally at home on your trail bike as it is on an enduro machine. Take your bike to the Rally level without breaking the bank.Key Features:Manufactured from 2014 Aluminium.,35 optimized profile design.,Extra control with 780mm width.,Stealth black on black decals to match every frame colour..Specification:Colour: Black.,Built For: Aggressive Trail / All Mountain / Enduro.,Sweep: 9° Rearward, 5° Upward.,Bar Diameter: 35mm.,Rise: 20mm.,Weight: 345g.,Width: 780mm..
The lightest gets lighter with major improvements in durability and carbon consistency. Built off the proven Next R crank arm shape and spindle insert, the new Next SL jumps back in the ring to be your featherweight champion. Made in Canada with American sourced carbon, the Next SL is also stiffer, improving power transfer and giving you the competitive edge on your pedal-oriented cross country rig. Add the CINCH Power Meter to fine tune your training and you have the ultimate crankset. Key Features: Proven crank arm shape and pedal insert end.,Increased stiffness and strength.,12g lighter than previous generations. Total target weight 418g with 32T ring.,Numerous spindle length options and CINCH power meter compatible.,Made in Canada with American carbon.,. Specification: Crank arm length / size: 170 / 175mm,Spindle length: 136mm,Spindle diameter: 30mm,BB Options:, BB92,68/73 BSA,100mm BSA,PF30, .Weight: 418g (32T ring no BB),Ring configurations: Spiderless Direct Mount, 64/104mm,Colour: Black.
Race Face's new Direct Mount 12 Speed Shimano chainring. Designed and machined in our Vancouver, BC facility, tested on the North Shore and in the Whistler Bike Park. Specification: Built for: XC / Trail., Measurements: 30, 32, 34 teeth., Compatible with 12-speed Shimano transmissions., Compatible with RF cranks with CINCH System Interface., Cinch Direct Mount., Weight:, 57g (30t),65g (32t),73g (34t) ..
Do you love to ride your mountain bike? Love boosting big airs, punishing the trails and your gear? You just want parts that can take a beating and won't let you down - the Chester 35 bar is made for you. These bars will last long after your bones, bruises and scrapes heal up and you're ready to tackle that gap jump that has had your number. Key Features: Manufactured from cold drawn, seamless 6061 Aluminium.,Shot peened for increased fatigue life.,35 optimized triple butted design.,. Specification: Built for: AM / DH / FR.,Dimensions: 780mm width, 8° rearward, 5° upward.,Rise: 35mm.,Bar Diameter: 35mm.,Weight: 400g.,Colour: Black..
Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you.FEATURESManufactured from cold drawn, 7075 Aluminium.,35 optimized triple butted design.,Turned up to Rally control with 780 or 800mm width.,Rise sizes to for every build and preference 10 / 20 / 35mm.,Stealth black on black decals to match every frame colour..SPECIFICATIONColour: Black.,Built For: Aggressive Trail / AM / Enduro.,Sweep: 8° Backward, 5° Upward.,Bar Diameter: 35mm.,Rise: 35mm.,Weight: 300g (20mm rise).,Width: 800mm..
BRING STRENGTH AND CONTROL TO YOUR RIGOur most popular bar doesn't just get wider. It gets stronger. By increasing the width of the Atlas 820 at the center, we were able to strengthen the bar while decreasing the weight. Pair this with 2 rise options, much loved 20mm, to super high 35mmm and up to 50mm of width tuning (can be trimmed down to 770mm), find your fit and control your ride.Key Features:Manufactured from cold drawn 7075 Aluminium.,35 optimized triple butted design.,Wider 820mm - can be trimmed to 770mm..Specification:Built For: AM / Enduro / DH.,Sweep: 8° Rearward, 5° Upward.,Bar Diameter: 35mm.,Rise: 35mm.,Weight: 320g (35mm)..