The Park Tool BT2 , commonly referred to as a 4th hand . The Park Tool Cable Stretcher pulls cables tight to leave your other hand free. It features one-hand operation with a thumb lock system to hold the cable tight while your hand is removed to tighten pull-up bolts and nuts. Made from heat treated steel, chrome plated, and featuring cushion grips for comfort. An invaluable tool, and once you've used one you'll understand just how useful it is and a must for any shop, home or professional.
What workshop would be complete without the trusty hammer If you haven't yet got one, or need to get a new one, then make sure the Park Tool HMR4 Shop hammer is at the top of your list. With a fibreglass shaft and soft touch rubber grip the hammer is comfortable to use, plus with a unique, two sided head with both steel and replaceable plastic striking faces there is no job too big (or small) for the HMR4.
These Park Tool thoughtfully designed P-handled hex wrenches fit the task at hand, as well as they fit in your hand. The long shaft of each wrench is fitted with a Bondhus Balldriver for those hard to reach bolt heads. The short end of the wrench is neatly chamfered and extends from the handle for use when fully tightening bolts in high torque applications. Shaft lengths are optimally selected to minimize the wind-up and flex experienced with longer wrenches. The hex wrenches are made from high torque industrial steel and through hardened for long life. The offset P-handles are made from a durable nylon material and are ergonomically-designed for comfortable use.
The Park Tool SPA6C uses hardened, replaceable pins. Designed for heavy-duty use, the distance between pins is adjustable, allowing use on virtually any hanger cup.
The SR12.2 Chain Whip & Sprocket Remover from Park Tool has been specially heat treated to prevent flexing and bending and boasting Park Tool legendary build quality. This Chain Whip also has a sprocket remover which fits Park Tool Freewheel/Cassette lockring tools. This also features a moulded handle which provides a great comfortable grip.
These Park Tool thoughtfully designed P-handled hex wrenches fit the task at hand, as well as they fit in your hand. The long shaft of each wrench is fitted with a Bondhus Balldriver for those hard to reach bolt heads. The short end of the wrench is neatly chamfered and extends from the handle for use when fully tightening bolts in high torque applications. Shaft lengths are optimally selected to minimize the wind-up and flex experienced with longer wrenches. The hex wrenches are made from high torque industrial steel and through hardened for long life. The offset P-handles are made from a durable nylon material and are ergonomically-designed for comfortable use.
The Park Tool RR12C is a small and handy measuring tape. The RR-12 features a tough, composite housing and both metric and English readings up to 12 feet (3.65m).
The Park Tool MB1 Magnetic Parts Bowl bench top accessory keeps small parts accessible and all in one place. 6 (15cm) in diameter and featuring an extra strong magnet, the MB-1 is available only in world famous Park Tool blue.
The Park Tool AWS10C multi tool is a selection of essential Metric hex wrenches in a convenient folding package. The one piece composite handle is comfortable, lightweight, slip resistant and 40% stronger than steel. Wrenches and screwdrivers are made from high torque Bondhus Protanium industrial quality tool steel for a long life. The Park Tool AWS10C Multi Tool includes 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm and 6mm hex wrenches.
Park Tool introduced the bicycle world to the three-way hex wrench set over 25 years ago. Updated in 2007, the Park AWS-1 and AWS-8 have colour-coded hex wrenches that allow sizes to be quickly identified, as well as a redesigned centre handle that fits perfectly in the palm of the hand. The hexes are made from Bondhus Protanium industrial steel and are hardened and tempered for long life. The Park Tool AWS1 Hex Wrench Tool includes 4mm, 5mm and 6mm hex key wrenches.
Park Tool introduced the bicycle world to the three-way hex wrench set over 25 years ago. This Park tool has excellent ergonomics and effective leverage as the composite centre fits into the palm of the hand. The hexes are made from Bondhus Protanium industrial steel and are hardened and tempered for long life. The Park Tool AWS3C Hex Wrench Tool includes 2mm, 2.5mm and 3mm hex key wrenches.
The BBT-5 / FR-11 may have a name that sounds like it is straight out of a sci-fi film but it is really a rather simple, yet essential piece of workshop equipment for anyone that owns Campagnolo components. Fitting 12-tooth internally splined Record, Chorus and Athena cartridge bottom brackets and Campagnolo cassette hub lockrings (including 11-speed lockrings) the BBT-5 / FR-11 is a dual purpose piece of kit. The oversized centre hole and thin wall design allows use without removal of cones and locknuts, saving precious riding time. The one-inch base fits the end of the Park SR-1 and FRW-1 tools or simply an adjustable wrench or bench vice.
The Park Tool CCP44C is specifically designed to remove cranks using an Octalink or ISIS drive bottom bracket interface. The tool uses a comfortable handle, fine thread, and a special rotating tip for superior leverage, smooth operation, and years of trouble-free service. The CCP44C will not work on crank arms that fit standard square tapered bottom bracket spindles.
This updated cassette lockring tool from Park Tool is an essential tool for the fitting/removal of your cassette and can also be used to fit and remove centre-lock brake discs. It now also fits the SRAM XX1 11-speed cassettes.Fits Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and other cassette lockringsGuide pin helps to hold the cassette tool in placeThis has been constructed with heat treated alloy steel with a one-inch base that will fit a wrench or a vice. The thin wall construction will allow you to use this without removing the cones and locknuts for extra convenience. It will also fit some disc brake lockrings giving this a tool multipurpose use.
The Park Tool HT series is specially designed for cranks, free hubs and pedals. The HT tools are built for speed, leverage and comfort. Our dual density, ergonomically designed screwdriver handle moulded over an extra long, extra deep, super strong hex. It may be your new favourite tool!
The Park Tool PAW12 - 12 inch Adjustable Wrench is both big and powerful. The PAW-12 (12 ) is forged from carbon steel, chrome plated, and features a comfortable vinyl dipped handle. Jaws open to 36mm and feature a laser engraved measurement scale.
These Park Tool thoughtfully designed P-handled hex wrenches fit the task at hand, as well as they fit in your hand. The long shaft of each wrench is fitted with a Bondhus Balldriver for those hard to reach bolt heads. The short end of the wrench is neatly chamfered and extends from the handle for use when fully tightening bolts in high torque applications. Shaft lengths are optimally selected to minimize the wind-up and flex experienced with longer wrenches. The hex wrenches are made from high torque industrial steel and through hardened for long life. The offset P-handles are made from a durable nylon material and are ergonomically-designed for comfortable use.
The Park Tool PW5 Home Mechanic Pedal Wrench is designed for the do-it-yourself mechanic or rider. The PW5 is perfect to take along or for the home workshop. Although economically priced, this 15mm pedal wrench, like all Park Tool products is built to last. Made from heat-treated spring steel and vinyl dipped for comfort, the PW-5 is 11-½ (29 cm) long.
The Park Tool SA1 Shop Apron protects your clothes and gives the advantage of large pouch pockets whenever you work in the shop. These full-length, shop quality aprons are made of a heavy 7-ounce cotton twill for comfort and durability. Navy blue with white embroidered Park Tool logo.
The Park Tool SAW1 Hacksaw is made of an all aluminium die cast frame construction. It comes complete with a blade tension adjuster and comfortable handle which makes it the perfect hacksaw for the shop. SAW1 includes one blade and accepts any 12 (300mm) hacksaw blade.