Search found 928 products for park tool

Park Tool CT-3.3 Professional Chain Tool
  • £35.99
  • RRP £40.00
  • Saving you £10

The Park Tool CT-3.3 Professional Chain Tool is a professional quality shop chain tool that works with 1/8", 3/16" single speed chains and 5 to 12-speed / 3/32" road and mountain bike derailleur chains* including SRAM AXS 12-speed, Shimano 12-speed chains and Campagnolo 13-speed chains.A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains, including SRAM AXS 12 speed, as well as 1/8 and 3/16 chainsThe CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivetsBuilt to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pinThe CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivetsMade in the USA and covered by Park Tool's legendary limited lifetime warrantyThe CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). Works with single speed half-links.*The CT-3.3 will install, but not peen, Campagnolo 11, 12 and 13-speed chain rivets (see CT-4.3 or CT-6.3)

VIEW ITEM
Park Tool 750 - Centering Cone Adaptor
  • £31.99

The Park Tool 750 Centering Cone Adaptor adapts the centering cone on HTR-1 for use on low profile , integrated and OnePointFive (1.5 inch) headsets. The HTR-1 must have the correct cutting tool and pilot for the corresponding standard.

VIEW ITEM
Park Tool AWS7C - Hex Wrench Set - 4-5mm And T25
  • £13.49
  • RRP £17.99
  • Saving you £25

Studies have shown that most common bike servicing and setting up tasks can be carried out using a 4 and 5mm hex wrench along with a T25 Torx wrench which is why Park Tool have brought these tools together to make the AWS7C wrench set. Made from heat-treated Bondhus Protanium high torque steel the wrench set features excellent ergonomics and effective leverage as the composite centre fits perfectly in the palm of the hand. The wrench set includes 4 and 5mm hex and T25 Torx wrenches.

VIEW ITEM
Park Tool BAG20 - Travel and Storage Bag for PRS20 and PRS21 - Black
  • £28.79
  • RRP £34.00
  • Saving you £15

The Park Tool BAG20 Travel and Storage Bag is a heavyweight nylon bag suitable for storing the PRS20 or PRS21 workstand when not in use.

VIEW ITEM
Park Tool CF2 - Cutting Fluid 240ml
  • £16.99
  • RRP £19.99
  • Saving you £15

The Park Tool CF2 Cutting Fluid is a high quality, environmentally safe cutting fluid that extends tool life and makes any frame prep job easier and safer. The use of cutting oil or cutting fluid is extremely important when performing any cutting, tapping, facing, or reaming operation. Park Tool Cutting Fluid can effectively be used on all metals except magnesium.Essential When Cutting, Tapping, Facing, or ReamingExtends the Life of Your Cutting ToolMakes the Job EasierCan be Used on all Metals Except MagnesiumEnvironmentally Safe 

VIEW ITEM
Park Tool DS2 - Tabletop Digital Scale
  • £38.24
  • RRP £44.99
  • Saving you £15

The Park Tool DS2 Tabletop Digital Scale, commonly called a gram scale, is a highly accurate tabletop scale perfect for weighing small parts and components in grams or ounces. Battery included.

VIEW ITEM
Park Tool FFG2 - Frame And Fork End Alignment Gauge Set
  • £139.00
  • RRP £154.99
  • Saving you £10

The Park Tool FFG2 Frame And Fork End Alignment Gauge Set helps to eliminate improperly aligned frame and fork dropouts. Such issues can cause bent axles and quick release skewers, as well as tracking and shifting problems. The updated FFG-2 quickly determines whether dropouts are aligned and parallel. If an error is detected, long handles and comfortable molded grips afford plenty of leverage for straightening. Works on frames and forks with dropout spacing up to 160mm.

VIEW ITEM
Park Tool FP2 - Floor Mounting Plate - For All PRS2 And PRS3 Stands
  • £35.99
  • RRP £40.00
  • Saving you £10

The FP2 plate enables you to securely bolt your PRS2 or PRS3 workstand to the floor eliminating any chance of the stand toppling over with your pride and joy on it mid service.

VIEW ITEM
Park Tool FR3C - Freewheel Remover - Suntour 4 Pin
  • £13.60
  • RRP £16.99
  • Saving you £20

The Park Tool FR3C Freewheel Remover is a heat treated alloy steel product with a one inch base to fit wrenches or a bench vice. Thin wall construction allows use without removal of cones and locknuts and fits all Sun Tour four-notch freewheels since 1986.

VIEW ITEM
Park Tool FR8C - Freewheel Remover - BMX Flip Flop Double Sided
  • £31.49
  • RRP £34.99
  • Saving you £10

The Park Tool FR8C Freewheel Remover is a heat treated alloy steel product with a one inch base to fit wrenches or a bench vice. Thin wall construction allows use without removal of cones and locknuts and removes four notch freewheels from flip-flop BMX hubs with 30 x 1mm threads.

VIEW ITEM
Park Tool HR8C - 8mm Hex Wrench - For Crank Bolts
  • £5.39
  • RRP £7.00
  • Saving you £23

The Park Tool HR8C is a long-handled L-shaped wrench for installing and removing crank bolts with an 8mm socket. Made from industrial quality high torque steel and through hardened for long life. Speed Bearing attachment for quick installation and removal of long threaded bolts.

VIEW ITEM
Park Tool HT - Hex Wrench Tool - 10mm
  • £10.99
  • RRP £16.99
  • Saving you £35

The Park Tool HT series is specially designed for cranks, free hubs and pedals.  The HT tools are built for speed, leverage and comfort. Our dual density, ergonomically designed screwdriver handle moulded over an extra long, extra deep, super strong hex.  It may be your new favourite tool!

VIEW ITEM
Park Tool HTR1 - Head Tube Reaming and Facing Set
  • £509.99

The Park Tool HTR1 Head Tube Reaming and Facing Set allows for proper frame preparation. The HTR1 combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. The HTR1 comes complete with a 30.0mm reamer, and four different size pilots, (29.8mm, 30.0mm, 33.8mm, and 36.8mm). There are cases when a reamer is required to clean out or increase the diameter of the head tube. Most times however, facing of the head tube for good cup fit is the objective. In this case, reaming is not necessary and the pilots can be used in place of the reamers to keep the tool straight and create a faced head tube. The unique part of the HTR1 is the quick-release, quick adjust feature. The bottom portion can slide off and on easily without the long threading process. This portion of the tool can still be fine tuned while in use. The tapered centering cone unit rides on a bearing for extra smooth operation. All cutting surfaces are top quality and extra sharp.

VIEW ITEM
Park Tool HXS1 - Professional Hex Wrench Set
  • £24.64
  • RRP £28.99
  • Saving you £15

The Park Tool HXS1 are shop quality L-shaped hex wrenches which have a genuine Bondhus balldriver tip on the long arm (excluding 8 and 10mm) for hard to reach bolt heads and a straight tip on the short arm for high torque applications. The wrench tips are precision chamfered for a clean, tight fit. Special speed bearing attachment facilitates installation and removal of long-threaded bolts. Wrenches are made from industrial quality Bondhus Protanium high torque steel through hardened for long life. Set includes 2, 2.5, 3, 4, 5, 6, 8, and 10mm sizes. The same shop quality L-shaped hex wrenches as the HXS2, but without the bench mount/wall mount holder.

VIEW ITEM
Park Tool IB1C - I-Beam Mini Fold-Up Hex Wrench And Screwdriver Set
  • £12.74
  • RRP £16.99
  • Saving you £25

The Park Tool IB1C is the perfect tool for taking on rides. The strong, compact, lightweight IB1C features our unique I-Beam handle surrounded by 3, 4, 5, 6 and 8mm hex wrenches and a straight blade screwdriver.

VIEW ITEM
Park Tool Ratcheting Wrench - 10mm
  • £13.49
  • RRP £14.99
  • Saving you £10

The Ratcheting Wrench from Park Tool is a combination metric wrench with both an open and 12-point two way ratcheting box end.This wrench has been constructed from vanadium steel which has then been chrome plated and polished giving you a high strength, high quality finish.The wrench is finished with a Park Tool blue vinyl which gives a secure positive grip. This is a world-famous Park Tool quality wrench which will last you a lifetime.

VIEW ITEM
Park Tool Ratcheting Wrench - 11mm
  • £13.49
  • RRP £14.99
  • Saving you £10

The Ratcheting Wrench from Park Tool is a combination metric wrench with both an open and 12-point two way ratcheting box end.This wrench has been constructed from vanadium steel which has then been chrome plated and polished giving you a high strength, high quality finish.The wrench is finished with a Park Tool blue vinyl which gives a secure positive grip. This is a world-famous Park Tool quality wrench which will last you a lifetime.

VIEW ITEM
Park Tool Ratcheting Wrench - 12mm
  • £13.49
  • RRP £14.99
  • Saving you £10

The Ratcheting Wrench from Park Tool is a combination metric wrench with both an open and 12-point two way ratcheting box end.This wrench has been constructed from vanadium steel which has then been chrome plated and polished giving you a high strength, high quality finish.The wrench is finished with a Park Tool blue vinyl which gives a secure positive grip. This is a world-famous Park Tool quality wrench which will last you a lifetime.

VIEW ITEM
Park Tool Ratcheting Wrench - 13mm
  • £13.49
  • RRP £16.00
  • Saving you £16

The Ratcheting Wrench from Park Tool is a combination metric wrench with both an open and 12-point two way ratcheting box end.This wrench has been constructed from vanadium steel which has then been chrome plated and polished giving you a high strength, high quality finish.The wrench is finished with a Park Tool blue vinyl which gives a secure positive grip. This is a world-famous Park Tool quality wrench which will last you a lifetime.

VIEW ITEM
Park Tool Ratcheting Wrench - 14mm
  • £13.49
  • RRP £16.00
  • Saving you £16

The Ratcheting Wrench from Park Tool is a combination metric wrench with both an open and 12-point two way ratcheting box end.This wrench has been constructed from vanadium steel which has then been chrome plated and polished giving you a high strength, high quality finish.The wrench is finished with a Park Tool blue vinyl which gives a secure positive grip. This is a world-famous Park Tool quality wrench which will last you a lifetime.

VIEW ITEM
expand_less