Features:The BBT-29 is a double-ended bottom bracket wrench designed to fit non-standard diameter 16-notch external bottom bracket bearing cups.One end fits cups with an outside diameter of 39 mm such as Shimano Dura-Ace 9000 series and XTR 980 series.The other fits 16-notch bearing cups with an outside diameter of 48.5 mm such as FSA MegaEvo.Made in the USA and covered by Park's legendary limited lifetime warranty.
A worn chain shifts poorly and wears sprockets at an accelerated rateThe CC-3 is a Go / No-Go gauge designed to accurately indicate when a chain reaches 0.75% and 1% wear - the point at which most chain manufacturers suggest replacementThe chain should be replaced soon if the 0.75% side fits into the chain, before other drive train components also start to wear out fastIf the 1% side fits into the chain, the chain is worn out and should be replaced immediatelyMade from precision, laser cut steelConsider that if you replace a chain because of wear other vital drive-chain components may need to be renewed too10-speed compatible
A selection of essential Metric hex wrenches in a convenient folding packageOne piece composite handle is comfortable, lightweight, and slip resistant - and 40% stronger than steelWrenches are made from high torque Bondhus Protanium industrial quality tool steel for a long life3, 4, 5, 6, 8, and 10 mm size hex wrenches
The SG-7.2 cutting guide is a specially shaped guide, designed specifically to accept aero-shaped seatmasts and seatposts up to 3.5 inches (89 mm) deepThe guide can also accept round tubes from 1-1/4 inch to 1-3/4 inch (32 mm to 45 mm) in diameterTwo cutting slots are gived, one for standard saw blades and one for thicker, carbon specific bladesHardened steel body with moulded contact points to priotect tubes and frames.
Key Features:The 1554-1 represents a dished wheel to assist in centering TS-2, TS-2.2, TS-3, TS-4, or TS-4.2 truing stands,
Features:A great time saver for anyone who builds wheels.Neatly designed to self-centre and drive conventional alloy or brass nipples during wheel lacing.Comfortable dual density grip for easy handling.Offset driver bit rotates on precision bronze bearings for a long, smooth running life.Works with rims up to 50 mm in depth.Made in the USA and covered by Park's legendary limited lifetime warranty
Features:Creates a tighter grip between surfaces, reducing the amount of clamping force needed to safely secure a component.Ideal for carbon or lightweight alloy handlebars, stems and seat posts.With more and more manufacturers specifying that assembly compound be used when assembling their components, make sure that you are not invalidating your warranty.An essential addition to any modern mechanic's workbench.Not for use on threaded surfaces
The TL-4.2 features a wide, flat tip for easy entry and fast removal,Spoke hook to use when multiple levers are needed,Set of 2 levers.
Key Features:A great shop accessory made to hold a wide variety of axles, spindles and Park Tool freewheel remover and lockring tools,Made from precision extruded aluminium, the inserts incorporate retainer legs and magnets that make for easy bench vice use,Features the following jaw openings: 5, 9, 10, 12, 14, 20, 25, 30, 36 mm, plus a mini V-block and a 1 inch hex,Aluminium jaws prevent you from damaging ultra fine axle threads,Bridge springs keep the jaws properly aligned and allow the tool to open automatically when the vice is opened,Made in the USA and covered by Park's legendary limited lifetime warranty.
Features:Well designed tyre levers to help make puncture repair as easy as possible.Updated to be stronger and more versatile.New material and redesigned tip.Easy entry into just about any tire, including tubeless tires.The unique design lifts the tire away from the rim and features a spoke hook to use when multiple levers are needed. Set of 3 levers
A workshop quality repair stand for mounting onto a wall.Key Features:Uses the same 100-3C heavy duty adjustable clamp as the PRS-2OS1 and PRS-3 OS1 deluxe oversize workshop stands.Heavy duty adjustable linkage clamp fits frame tubes up to 1-5/8inches (41 mm).Designed to be wall mounted>Clamp rotates 360 degrees.Mounts easily to any flat surface.Mounting bolts not included.Made in the USA and covered by Park Tool's legendary limited lifetime warranty.
Key Features:For use with the HTR-1 Head tube Reaming and Facing Set.,The 788 reams the headtube to an internal diameter at 43.95 mm to accept internal headset cups with 44.05 mm - 44.10 mm outer diameter (1-1/8 inch ZS standard)..
Features:Base for Park Tool PRS-33 power lift stand.The height and heft of the PRS-33 requires a whole different level of base support and this forged slab will keep you stable during even the most vigorous wrenching.Drilled specifically for the PRS-33 the 135-33 features threaded height adjusters at each corner for perfect stability on uneven surfaces.Made in a the USA with Park's usual lifetime warranty, if you break this we'll want to know how! .
Use as a self contained grease gun by using the included canister or screw the pump on to any tube of Park Tool grease, anti-seize or assembly compound.Key Features:Small tip opening ensures precise placement of lube in any application.
Key Features: Two-sided spoke wrench is designed for Mavic wheel sets.,Long handle gives good leverage for stubborn spoke nipples.,Fits both Mavic 7-spline 6.4 mm outer diameter and 6-spline 9 mm outer diameter Mavic nipples.,Made in the USA and covered by Park's legendary limited lifetime warranty.,
Updated with a more rounded, smoother shape to fit better in the hand,Fits the three most popular spoke nipple sizes on the market (3.23 mm, 3.30 mm, 3.45 mm),Made from nickel plated steel for years of service,Designed for the home mechanic.
Small, handy tool designed to make extracting Schrader and removable Presta valve cores and valve extenders simple5mm wrench flats give additional leverage, especially useful when removing cores that have been used with sealant,A perfect 'take along' tool especially for tubeless users and people running deep section rims,Anodized in vivid Park Tool blue to make is stand out on your workbench.
A set of three unique, multi-purpose picks ideal for a wide variety of detail workAluminium handle with magnet,Picks are replaceable, cold formed, heat treated and polished high carbon steel,Set includes 1-straight, 1-hook and 1-90 degree pick,Made in the USA and covered by Park Tool's legendary limited lifetime warranty.
The Park Tool DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor.Key Features:Use of the DT-5.2 helps ensure proper disc brake setup and performance.Faces any IS Mount, Post Mount or new Shimano.Flat Mount, including low clearance, chainstay mounts.Telescoping axle adapters allow use with any configuration of open or thru axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles).Precision machined parts.Includes two facing cutters--one for IS mounts and one for Post and Flat Mounts.
Professional quality 7 inch side cutting pliersForged, heat-treated cro-moly steel construction for years of useInvisible separator spring and comfortable, dual density grips for comfort and convenience.