Easily storable in your kit bag or attached to your water bottle cage via the bundled mounting hardware for maximum portability, this Presta and Schrader valve compatible pump is a great looking and top performing mini inflator. The all-aluminium barrel construction guarantees durability and is designed for a lifetime of use and top performance. With a maximum inflating pressure of 90psi and weighing just 130 grams, the Mini Pump PMP-4.2 offers quality inflation from a compact and comfortable device.
Durable and lightweight for regular use, the Derailleur Screwdriver - DSD is constructed from CNC machined, hard anodised 6061 aluminium, with a 5mm precision ground flat blade for exact attachment to the components that hold your derailleur in place. The ergonomic handle makes twisting and turning as comfortable as possible when carrying out essential gear system maintenance. A well-crafted screwdriver from Park Tool, any toolkit would benefit from its addition.
These workshop quality tools are made from chrome vanadium steel making them tough and durable so they last a lifetime of use.
With over 8 inches of sliding travel adjustment and an adjustable hook which accommodates tubes up to 1 3/4" in diameter, this tool will not only reshape your frames and forks but will do the same for your cranks and handlebars to boot. Covered with a vinyl coating on the hook and fulcrum, your bike's painted surfaces will be free from scratches and dings while you work away. The Frame & Fork Straightener FFS-2 is a versatile and well-crafted tool for essential maintenance of your forks and frames.
Built for longevity and regular use, Park Tool's Professional Chain Scrubber CM-25 is made from extremely durable die-cast aluminium and contains top-quality brushes, giving consistent wash quality every time. The tool also contains wicking pads and dual-sided sponges to reduce drippage, as the rotating brushes make sure all four sides of each link get the best clean possible. The brush and sponge cartridges can be clicked in and out after each wash to dry out before their next use and the whole scrubber is 100% serviceable. A fantastic bit of kit for keeping your ride in top condition, for any home mechanic or workshop.
The Campag Crank & Bearing Tool Set CBP-8 comes equipped with everything you need to get to work on your specialised cranks and bearings, taking them off and putting them back firmly and safely to keep your pedalling in peak condition. The set features a Power Torque compatible crank puller, crank removal extension plug and crank bearing removal adaptor as well as a bearing puller and setter which will also work with Ultra-Torque systems. Completing the set are protective pads and adaptors for use with both carbon and aluminium cranks, making it just the job for an often arduous task.
Compatibility The 104 is intended for stands with a vertical upright tube. If the 104 tray is fitted to tubes of the tilted PCS-9 and PCS-10 stands, the tray will sit at a slight angle. The 104 tray uses a shim to fit tubes of 1-1/2" (38mm). Without the shim, it will fit tubes 1-5/8" (41mm). The 104 tray will NOT fit PRS-2 OS, PRS-3 OS, and PRS-4 OS, PCS-9, PCS-10, PCS-11, PRS-25 and PRS-15. The PRS-5 stands using a black vertical tube and mates well with the 104 tray. Pre-2002 PRS-5 models use a blue oval vertical tubing. This blue tubing has marginal but adequate contact with the 104 tray.
Forged from chrome vanadium steel, chrome plated and branded with the Park Tool logo, there's no denying the manufacturer's pride in this set of essential work tools. Finished with a protective vinyl coating on the handle for maximum comfort and grip while working, these wrenches range from 6mm to 17mm to tackle a wide range of nut and bolt sizes:
The world's largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world.
Also fits PCS-1, PCS-4 and PCS-9 Repair Stands when used with part #106-AC Accessory Collar (available separately). Perfect as a convenient way to keep tools and supplies handy in the workshop or at events.
This Park Tool bearing press kit is equipped with one bottom bracket bearing remover and two bushings that will assist with the fitting of new bearings (separately sold headset press tool also required to install pressfit bearing/cups). Ideally suited to removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems, this pack will help you to get the job done in no time at all. An up-to-date version of Park Tool's BBT-30.3, this set gives a longer length to work with wider fat bottom bracket shells, making it a fantastic tool to add to any garage or professional bike workshop. How To Use: To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings (included) are used with a headset press (not included) to quickly and accurately press the bearings into the shell.
To use, just hang the head of the spoke in the oblong hole and read its length on the scale. For crank cotters and ball bearings, it works just like a gauge for drill bits.
This bench-mounted version of the popular Park Tool PCS-10.2 Deluxe Home Mechanic Repair Stand features their world-famous cam-actuated micro-adjust clamp design, which securely holds bicycles in place while allowing quick installation and removal. Cam actuated, micro-adjustable clamp allows quick entry and exit and fits 1" to 3" (25mm–76mm) diameter tubes and seat posts of any shape and material Narrow clamping jaws (2.7"/7cm) fit into tight areas or on short seat posts 360° infinite clamp rotation allows the bike to placed in the optimal position for specific repairs All steel structure for maximum stiffness and durability Super strong glass-filled nylon composite fittings and top tube internals enable smooth rotation and secure positioning Mounts to any flat surface (mounting bolts not included) Weight Limit: The PCS-12.2 Home Mechanic Bench Mount Repair Stand has an 80 lb. (36kg) weight limit, provided the stand is securely mounted with appropriate fasteners to a solid and secure bench surface. The user is responsible for making sure the workbench and the fasteners are capable of handling this amount of weight.
Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality.
Saves wear and tear on your chain and freewheel. Works great on brakes or other places where dirt collects.
Providing fantastic torque and strength from their long L-shaped shafts, the P-Handle Torx Wrench Set PH-T1.2 is built from industrial steel that gives durability, credibility and a professional feel to any job you use them on. Their star-shaped heads are compatible with a wide range of screws and fasteners found on your bike or elsewhere in your workshop. Every one of the eight included tools is housed in its own individual slot in the convenient holder for quick, neat storage. Ergonomically designed nylon handles fit round the tool to give superb day-after-day comfort when being used while the shafts are long enough to get to those hard-to-reach screws with ease. With additional wrench and multi-tool storage supported by the 3 hanging holes on the holder's body, the P-Handle Torx Wrench Set PH-T1.2 is an essential for amateur and pro mechanics alike.
This crank wrench will be of benefit to any profession or amatuer mechanics toolbox.
This spring-loaded gun and canister can be used as a self-contained lubricator when filled with grease or anti-seize, with the removable head perfectly sized and threaded to be attached to Park Tool lube bottles for added versatility. Equipped with a small opening at the tip, it allows for accurate and controllable amounts of grease to be applied to those components in need of lubrication.
This Park Tool portable bike stand is ideal for riders who love their last minute tweaks before races or sportives. Note: The maximum weight holding capacity of the PRS-25 is 100 lbs. (45kg). This assumes the weight is centered over the legs.