The Nukeproof Horizon CL Ti Pedals have been extensively engineered to exact standards and take inspiration from the hugely successful Horizon Pro flat pedal. They offer the optimum balance of impact strength, fatigue resistance, low weight, and now feature an all-new SPD cleat engagement. With input and influence from Nukeproof's Pro team riders Matti Lehikoinen and Mike Jones, you can be sure your getting a platform that's designed to win.All New SPD Cleat SystemThe SPD cleat engagement system is dual sided and unique to Nukeproof, but it does support all other brands of SPD devices too. Pedals are supplied with a cleat offering +4 degrees of float, with a +8 degree cleat available to purchase separately.Key Features:Cold forged T1- 6061 alloy body with CNC finishing.Tough and lightweight Titanium axle.Proven axle system- 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair).Low profile contoured chassis with optimised leading edge.Side Support Platform.Dual Engagement Mechanism.SPD compatible.Weight: 430g.
The Nukeproof Horizon CS CroMo Pedals are the slightly smaller version of Nukeproof's the new SPD compatible range and take inspiration from the hugely successful Horizon Pro flat pedal. They offer the optimum balance of impact strength, fatigue resistance and low weight. With design input and influence from Nukeproof's Pro team riders Matti Lehikoinen and Mike Jones, you can be sure your getting a platform that's built to win.All New SPD Cleat SystemThe SPD cleat engagement system is dual sided and unique to Nukeproof, but it does support all other brands of SPD devices too. Pedals are supplied with a cleat offering +4 degrees of float, with a +8 degree cleat available to purchase separately.Key Features:Cold forged T1- 6061 alloy body with CNC finishing,Tough and lightweight CrMo axle,Proven axle system- 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair),Low profile contoured chassis with optimised leading edge,Side Support Platform,Dual Engagement Mechanism,SPD compatible,Weight: 432g.
This Reactor Upper Swing Link Kit is for use with the 2020 Nukeproof Reactor frame.Kit Includes:1x NP-107 (Swing Link Pivot Axle)2x NP-108 (Swing Link Pivot Spacer)2x NP-109 (Swing Link Pivot Bolt)
From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descentsRail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.To ensure the bike could climb as well as it descends, we designed the 4 bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.
Tested on tough enduro and downhill trails, Nukeproof’s Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof’s expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you’re sitting in the optimal riding position.PRECISION CNC MACHINED FOR STRENGTH AND TO REDUCE WEIGHTThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.OFFSET DESIGN FOR DURABILITY AND EASIER FITTINGThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.
The Nukeproof Horizon SL Saddle was developed in conjunction with the Nukeproof DH & Enduro pro riders to offer superior comfort and light weight performance.Optimised Pedaling Position and Tyre ClearanceThe ergonomic design was achieved using a combination of different densities of super light foam to offer maximum comfort without increasing weight. It is curved up at the rear to hold the rider in an optimised pedalling position on long climbs and to provide more tyre clearance for longer travel bikes. It has been finished in a durable vacuum formed water repellent microfibre cover so that even on wet days it will be comfortable.Key Features:Material: Glassfibre-reinforced Nylon (base), Microfibre (cover),Padding: Dual density light weight foam,Dimensions: 134mm x 260mm,Rails: CrMo,Intended Use: Trail, All Mountain, Enduro, Downhill, Freeride.
The Cub-Scout 20” Race is not just another kids bike: taking inspiration from our award-winning Scout adult hardtail range, the Cub-Scout 20” has been designed from the ground-up as a proper mini-hardtail mountain bike. It has been designed to allow kids to learn the ropes of riding, inspire confidence on the trails and act as the perfect platform for progression. Developed and tested with the help of our own children, we have created a class leading lightweight kids bike range to inspire and nurture budding future World Cup or EWS winners!The range of Cub-Scout Hardtail frames are available in 20”, 24” or 26” options; meaning that there should be a Cub-Scout to suit kids of all sizes from aged 5 and up. Each frame features a lightweight custom butted 6061 Alloy frameset with bang up to date long, low and slack kids specific geometry.
This revised Neutron riser bar features an updated profile with the same angles and rise options as before, so you can enjoy reliable and precise steering. It features a shot-peened alloy construction, which gives you fantastic durability and strength on the roughest of rides.Nukeproof has also kitted out this version with a 9 degree backsweep without reducing its reach. This means that you won’t lose any reach, like you would on a standard bar. Key Features: Material: 6061 Alloy,Finish: Shot-peened,Backsweep: 9 degrees,Upweep: 5 degrees,Length: 800mm,Clamp Diameter: 31.8mm,Technical Markings: Markings on the top of the handlebar,Weight: 380g (25mm rise version).
The Mega 297 Comp Alloy features a strong and lightweight alloy frame, long-travel RockShox suspension, a Shimano Deore 12-Speed groupset and a mixed-wheel platform that consists of a 29" front and 27.5" rear wheel. This 297-wheel setup gives a superb balance of stability, pace and agility for fast trail sections and technical terrain. This stylish, affordable and reliable enduro race bike offers reliability, efficiency and power to ride trails anywhere on Earth.SHIMANO DEORE 12-SPEED GROUPSET AND HYDRAULIC DISC BRAKESThis fun and versatile full-suspension enduro bike is equipped with a Shimano Deore 1x12-Speed groupset, giving you a wide gear range for climbing steep hills while powerful hydraulic disc brakes help control your momentum when descending. It also rolls upon stable and dependable Sun-Ringle Duroc SD37 wheels wrapped in fast rolling, Tubeless Ready Wide Trail Maxxis Assegai and Minion DHR tyres. And it is fitted with a Brand X Ascend internally routed dropper seatpost.THE MEGAV4: BORN THROUGH EVOLUTION, NOT REVOLUTION.For over 10 years, Nukeproof's best-selling model, the Mega has been racking up awards on Enduro stages and in the press around the world. With 4 Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. However, they never rest on their laurels with the introduction of the 4th generation Mega - Now available in an all-new mixed wheel size platform.WORLD CLASS ENDURO RACE BIKESince 2009 the Nukeproof Mega has been constant path of development to meet the evolving demands of our riders and customers alike. The Nukeproof team are relentlessly striving for improvements and with each generation the Mega has been chiselled and shaped into today’s thoroughbred Enduro race bike. With the launch of the Mega 290 Comp, you could forgive their designers for resting on their laurels. However, as Nukeproof products are developed between the tapes, there is a constant desire to hone and refine to give Nukeproof’s athletes and riders the best possible chance of standing on top of the podium.The Mega V4 is now available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size. The new mixed platform uses a 29” wheel up front to maximise grip and rolling efficiency whilst the 27.5” wheel out back, ensures nimble handling for manoeuvrability.Designed as an evolution of the ultimate Enduro bike, the Mega V4 has been fully reimagined for to offer optimised sizing/fit, improved Geometry and suspension kinematics on a brand-new custom triple butted hydro-formed alloy frame. Most importantly you can now fit a water bottle inside the main front triangle.LONG-TRAVEL FULL SUSPENSION ALLOY FRAMEThe Alloy Mega features a full custom triple butted hydro-formed 6061-T6 Aluminium tube set and forged parts. It is available for 27.5”, 297 or 29” wheel sizes. These are totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size so that you can get the most out of every ride.UPDATED SIZING AND GEOMETRYWhilst humans may not have changed size much in recent years; the bikes they choose to ride most certainly have. To ensure a perfectly dialled fit Nukeproof now offer the 297 bikes in S, M, or L sizes and the 290 bikes in M, L, XL or XXL.Lower, longer, steeper and slacker. The Mega geometry is designed around the saddle offset for each size to optimise seated weight distribution. This results in steeper seat angles across the board but especially on larger sizes for taller riders. This in turn results in longer reach figures to ensure a comfortable cockpit on each size. To further aid the perfect fit Nukeproof have also used shorter seat tubes which are designed to maximise seat post insertion depths. Finally, all Mega bikes are now designed to use short offset forks to further improve both climbing and descending capabilities.PROGRESSIVE AND SUPPORTIVE SUSPENSION PLATFORMTo step-change the Mega’s suspension design Nukeproof went back to the drawing board and started afresh. They have redesigned the Mega 4 bar horst linkage to be super supple over small bumps, progressive and supportive throughout the mid stroke for support when pedalling, cornering and pumping, with increased end stroke leverage to allow more tuning options with volume spacers. The kinematic is designed to have higher levels of anti-squat for climbing gears but this reduces as you drop down the cassette. The result is a bike that is more confidence inspiring everywhere on the hill. It behaves itself on the climbs yet can still be thrashed through the roughest and most technical terrain on the way back down.
Custom-manufactured in Taiwan to our exacting standards, Nukeproof brake pads now feature Organic, Semi-metallic and Sintered compounds mounted on steel backing plates for excellent heat dissipation and are available to fit all major brake systems.Tested to their limit in all possible conditions by some of the world’s toughest and most demanding riders, Nukeproof disc pads will outperform the competition in wet weather or dry. No nonsense, High quality, High power braking with excellent modulation.Suitable for: AM/XC/DH/FR
Custom-manufactured in Taiwan to our exacting standards, Nukeproof brake pads now feature Organic, Semi-metallic and Sintered compounds mounted on steel backing plates for excellent heat dissipation and are available to fit most brake systems.Tested to their limit in all possible conditions by some of the world’s toughest and most demanding riders, Nukeproof disc pads will outperform the competition in wet weather or dry. No nonsense, High quality, High power braking with excellent modulation. Key Features: Organic Option: Good initial bite, Very short bed-in time, Low noise,Semi-metallic Option: Strong initial bite, Fade-resistant, Low noise,Sintered Option: High heat resistance, Superior performance in wet and dry conditions, Strong and consistent braking over wide range of speeds,Built For: AM/XC/DH/FR,Compatible with: Hope Tech 3 E4 and Race Evo E4 Disc Brakes.
Nukeproof headsets are now available as separate top and bottom cups allowing you to easily choose the options you require. This version uses high-end bearings with Ti coated races and stainless balls.The bearing is ABEC 5 certified which means that it has passed tests which include ID and OD tolerance’s, roundness of ball, trueness of faces & surfaces as well as noise testing at high RPM. These bearings have been designed and tested for the harshest of UK winters so if you want bearings that won’t let you down then these are the ones to get. These headsets have been revised, improved and expanded for optimum fit, sealing and performance as well as compatibility with a wide range of fork and frame standards. Featuring sealed angular contact bearings, split alloy crown races and upper and lower bearing cups CNC-machined from proprietary aluminium, the headset offers the optimum balance of light weight, strength and durability for performance across all riding disciplines. All models feature a super tough black hard anodised finish, with laser-etched graphics. Nukeproof are so confident in the performance of these bearings that they are offering a 5 year warranty so you can be rest assured your purchase will be a good one. Key Features: Specific Bottom Headset cup,Replaceable angular contact bearings,Lazer-etched graphics (including code),Split Alloy Crown Race for easy installation/removal,Hard Anodised Finish,Internal and external options,Includes: Crown race, top cap and bolt supplied (Reducer crown race for 1 1/8" sold separately) .
Fully designed and developed by Nukeproof's in-house engineers, this mountain bike (MTB) seat clamp ensures a no compromise, reliable and lightweight design that's also an aesthetically pleasing finishing component for your bike. It features a CNC-machined 6061 aluminium build, which removes all unnecessary material so you can benefit from a super lightweight clamp without compromising strength.A CNC stainless steel barrel, stainless steel bolt, anodised finish and laser etched graphics ensure your clamp will stay fresh and hold your seatpost securely.The clamp is a universal design but has been designed to fit perfectly with Nukeproof frames to ensure a seamless gap-free fit between the clamp and the frame.
The Cub-Scout 24” is not just another kids bike: taking inspiration from our award-winning Scout adult hardtail range, the Cub-Scout 24” has been designed from the ground-up as a proper mini-hardtail mountain bike. It has been designed to allow kids to learn the ropes of riding, inspire confidence on the trails and act as the perfect platform for progression. Developed and tested with the help of our own children, we have created a class leading lightweight kids bike range to inspire and nurture budding future World Cup or EWS winners!The range of Cub-Scout Hardtails are available in 20”, 24” or 26” options; meaning that there should be a bike to suit kids of all sizes from aged 5 and up. Each bike features a lightweight custom butted 6061 Alloy frameset with bang up to date long, low and slack kids specific geometry.UPDATED KIDS SPECIFIC COMPONENTS:Proper fit and function of components is essential for kids bikes because adult components are not optimised for smaller people. To ensure that these bikes fit and function perfectly, we took the time to test and develop our own or work with our partners to select the best kids-specific components we could find on the market.KIDS SPECIFIC PARTS INCLUDE:Nukeproof Urchin Saddle, Grips & Handlebars,Custom tuned forks for young rippers,Specific resized cranks,Kids specific brake levers.Features:Kids Hardtail,Hydroformed 6061 Triple-Butted Aluminium,Small person optimisation- kids specific componentry,Sizes Avaliable: 24".
The Sam Hill Signature Series has been developed for one of the world’s best with one thing in mind; winning! The five time downhill world champion needs no introduction. He is widely regarded as one of the best riders of all time and as such, he knows what works best! The Sam Hill Signature series is a no-compromise range of race ready components chosen by Sam as the tools for the job.Sam has always been particular about his setup and Nuke proof has taken great pride in developing no nonsense, custom products for Sam with some innovation even coming from his motocross bike! Together we have helped to produce World level products that everyone can use.The entire Sam Hill Signature Series also feature matching graphics which were inspired by Sam himself.Key Features:Compound: Custom soft Kraton rubber diamond texture grip with Sam Hill signature and half waffle pattern,Graphics: New for 2016 Laser etched Sam Hill Series graphics on the lock rings and bar ends,Diameter: 31.5mm (grip),Width: 135mm,Build for: DH/FR,Colours: Black.
The Nukeproof pedal range has been extensively engineered to offer the optimum balance of strength and fatigue resistance with minimum weight penalty.Designed in conjunction with 5-time downhill world champion Sam Hill, we have created a flat pedal that incorporates a large platform, adjustable pins and angled faces to aid deflection from obstacles.Each pedal body spins on high quality DU bushings with 2 sealed cartridge bearings to help spread the stress loads from heavy impacts. Meanwhile a lip seal between the axle end and pedal body helps to reduce ingress of water and dirt prolonging pedal life between services.With all of the features seen on the Horizon Sam Hill, but in a much more stealth package with a black ano platform including subtle laser etch graphics and accompanied by black adjustable pins.Key Features:2 x High quality DU bushings & 4 x sealed cartridge bearings (Per Pair).Forged 6061-T6 alloy body with CNC finishing.Cro-Mo axle.Adjustable pin heights.Weight: 430g.
Custom-manufactured in Taiwan to our exacting standards, Nukeproof brake pads now feature Organic, Semi-metallic and Sintered compounds mounted on steel backing plates for excellent heat dissipation and are available to fit all major brake systems. Tested to their limit in all possible conditions by some of the world’s toughest and most demanding riders, Nukeproof disc pads will outperform the competition in wet weather or dry. No nonsense, High quality, High power braking with excellent modulation.
Custom-manufactured in Taiwan to our exacting standards, Nukeproof brake pads now feature Organic, Semi-metallic and Sintered compounds mounted on steel backing plates for excellent heat dissipation and are available to fit all major brake systems.Tested to their limit in all possible conditions by some of the world’s toughest and most demanding riders, Nukeproof disc pads will outperform the competition in wet weather or dry. No nonsense, High quality, High power braking with excellent modulation.
Custom-manufactured in Taiwan to our exacting standards, Nukeproof brake pads now feature Organic, Semi-metallic and Sintered compounds mounted on steel backing plates for excellent heat dissipation and are available to fit all major brake systems.Tested to their limit in all possible conditions by some of the world’s toughest and most demanding riders, Nukeproof disc pads will outperform the competition in wet weather or dry. No nonsense, High quality, High power braking with excellent modulation.Suitable for: AM/XC/DH/FR