These MTB pedals feature a rock-solid aluminium platform construction, which makes them more than capable of handling all the abuse associated with all-day epics. Nukeproof has also put these through a forging and CNC-machining process, which means you'll benefit from their amazing durability without adding any unnecessary weight to your hardtail or full suspension ride. These pedals are in Nukeproof's special edition oil slick colour. Sam Hill MTB Pedals Developed by mountain bike legend Sam Hill and long-time mechanic Jacy Schumilak, these MTB pedals are engineered for maximum performance. Using all the proven internal parts of the Horizon Pro pedals, these signature enduro pedals spin on high-quality DU bushings with two sealed cartridge bearings. This makes the Nukeproof Sam Hill Enduro Race Pedals Oil Slick an ideal choice of upgrade for riders who want a reliable pedal stroke in all-weather conditions. Click here to view and download the Nukeproof Flat Pedal Instructions Click here for a Step by Step Installation Guide This pedal is fully serviceable. It can be stripped and rebuilt using the guide here
This MTB rim is made from a special blend of alloys, which give it a similar hardness to 7-series alloy but with the ductility and yield properties of a 6-series. This means that you will enjoy the best of both worlds as you carve your way around the mountain. Nukeproof has also equipped this model with a micro-shotpeened and anodised finish, which gives it an extra layer of resistance against wear and corrosion. As a result, you'll benefit from being able to shred the trails in all weather conditions, without worrying about the elements ruining your gear. Nukeproof has ensured that their front and rear rim profiles are the same but due to the rear rim being more likely to take most of the hits, they have used a thicker sidewall for added strength. The front rim has a thinner sidewall, which allows for excellent weight savings and a perfect balance between strength and weight. If you want some extra security, or if you want to save some more weight, there is no problem using a pair of front or rear rims. Nukeproof use a sleeved rim as this allows them to have full control over the properties of the alloy. When you weld a rim it is exposed to a large amount of heat which changes the properties of the alloy in the area around the weld. This change can lead to a weak spot in the rim. Nukeproof's tolerances are so precise, they can ensure that the alloy properties are the same throughout the whole rim. Option RD Weight 27.5" Front 554.5 460g +/- 5% 27.5" Rear 554.3 490g +/- 5% 29" Front 592.5 510g +/- 5% 29" Rear 592.3 540g +/- 5%
Nukeproof Horizon V2 RimThis MTB rim is constructed from a special blend of alloys, which give it a similar hardness to 7-series alloy but with the ductility and yield properties of a 6-series. This means that you'll benefit from the best of both worlds as you blast across the mountain. Nukeproof has also equipped this model with a micro-shotpeened and anodised finish, which gives it an extra layer of resistance against corrosion and wear. As a result, you'll enjoy being able to shred the trails in all weather conditions, without worrying about the elements damaging your gear.Nukeproof has ensured that their front and rear rim profiles are the same but due to the rear rim being more likely to take most of the hits, they have used a thicker sidewall for added strength. The front rim has a thinner sidewall, which allows for excellent weight savings and a perfect balance between strength and weight. If you want some extra security, or if you want to save some more weight, there is no problem using a pair of front or rear rims. Option ERD Weight 27.5" Front 554.5 460g +/- 5% 27.5" Rear 554.3 490g +/- 5% 29" Front 592.5 510g +/- 5% 29" Rear 592.3 540g +/- 5% Features: Rim Material: Alloy Nukeproof BlendFinish: Micro shotpeened and anodised Use: MTB Rim Inner Width: 30mmRim Outer Width: 35mmRim Height: 21.6mmJoint: SleevedTubeless Compatible: Yes, Use 33mm tapeDrilling: 32 holeBrake Type: Disc onlyValve Type: PrestaBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 RimThis MTB rim is constructed from a special blend of alloys, which give it a similar hardness to 7-series alloy but with the ductility and yield properties of a 6-series. This means that you'll benefit from the best of both worlds as you blast across the mountain. Nukeproof has also equipped this model with a micro-shotpeened and anodised finish, which gives it an extra layer of resistance against corrosion and wear. As a result, you'll enjoy being able to shred the trails in all weather conditions, without worrying about the elements damaging your gear.Nukeproof has ensured that their front and rear rim profiles are the same but due to the rear rim being more likely to take most of the hits, they have used a thicker sidewall for added strength. The front rim has a thinner sidewall, which allows for excellent weight savings and a perfect balance between strength and weight. If you want some extra security, or if you want to save some more weight, there is no problem using a pair of front or rear rims. Option ERD Weight 27.5" Front 554.5 460g +/- 5% 27.5" Rear 554.3 490g +/- 5% 29" Front 592.5 510g +/- 5% 29" Rear 592.3 540g +/- 5% Features: Rim Material: Alloy Nukeproof BlendFinish: Micro shotpeened and anodised Use: MTB Rim Inner Width: 30mmRim Outer Width: 35mmRim Height: 21.6mmJoint: SleevedTubeless Compatible: Yes, Use 33mm tapeDrilling: 32 holeBrake Type: Disc onlyValve Type: PrestaBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Super Light Steel Rear Spring (2.5"-3")Nukeproof's Super Light Steel (SLS) Spring has been treated with a unique process to change the chemical composition to convert the Silicium/Chromium/Steel Alloy construction to create a strong, durable material, that is also incredibly lightweight.To prevent shock rub, the spring is bi-convex in shape. This will allow the spring to progress freely without any friction when under load. Up to 40% lighter than a steel spring, this hardened Super-light steel (SLS) spring has been designed to fit most rear shocks on the market by using Nukeproof’s unique Reducers and Spacers.Please Note: Not compatible with Fox 222mm shocks.Features Hardened Super Light Steel (SLS) Bi-convex in shape Fits most rear shocks on the market Includes reducers and spacers 200 – 550lb range Spring Rate Spring Weight (Grams) 200lbs 281 250lbs 300 275lbs 334 300lbs 324 325lbs 347 350lbs 363 375lbs 369 400lbs 388 425lbs 410 450lbs 450 500lbs 495 550lbs 545 Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Superlight Enduro Spring (2.25"-2.5")The Nukeproof 2.25"" - 2.5"" SLS spring has gone through a unique heat treatment process to alter the chemical composition of the metals. This unique process changes the Silicium/Chromium/Steel Alloy mix to produce a super hard, yet lightweight metal that will withstand the highest demands inflicted through MTB. To prevent shock rub, the spring is also bi-convex in shape. This will allow the spring to progress freely without any friction when under load.Lightweight Rear Shock SpringUp to 40% lighter than a steel spring, this hardened Super-light steel (SLS) spring has been designed to fit most rear shocks on the market by using Nukeproof's unique reducers and spacers.This spring will work with metric shocks with an eye to eye between 210mm and 230mm, and with a stroke length between 47.5mm and 65mm.The spring will also work with standard shocks with an eye to eye between 200mm and 216mm, and a stroke length between 2” - 2.5”.A pair of 38mm to 36mm reducers are included to allow this spring to be fitted to most shocks on the market. Features: For 2.25" - 2.5" shocks Hardened Super Light Steel (SLS) Bi-convex in shape Fits most rear shocks on the market Includes reducers and spacers 350lb - 600lb rangeSpring Rate / Nukeproof Super Light (SLS) Weight Rate Free Length mm Outside dia (max) Weight Spacer size for standard shock Spacer size for New Metric shock 350lbs 113 57.5mm 257g 10mm 30mm 400lbs 115 57.5mm 280g 10mm 30mm 425lbs 116 57.5mm 310g 10mm 30mm 450lbs 117 57.5mm 313g 10mm 30mm 475lbs 119 57.5mm 335g 10mm 30mm 500lbs 120 57.5mm 365g N/A 20mm 550lbs 125 57.5mm 388g N/A 20mm 600lbs 125 57.5mm 427g N/A 20mm We supply the correct spacers in the box to suit the rate of spring which you purchase.Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon CS CrMo Trail Flat MTB PedalsThe Nukeproof Horizon CS CroMoCrMo Pedals are the slightly smaller version of Nukeproof's the new SPD compatible range and take inspiration from the hugely successful Horizon Pro flat pedal. They offer the optimum balance of impact strength, fatigue resistance and low weight. With design input and influence from Nukeproof's Pro team riders Matti Lehikoinen and Mike Jones, you can be sure your getting a platform that's built to win.All New SPD Cleat SystemThe SPD cleat engagement system is dual sided and unique to Nukeproof, but it does support all other brands of SPD devices too. Pedals are supplied with a cleat offering +4 degrees of float, with a +8 degree cleat available to purchase separately.Should you happen to prefer longer cleat bolts or simply to fine-tune your riding experience, you can find the Long Nukeproof Cleat Bolts HERE This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Cold forged T1- 6061 alloy body with CNC finishing Tough and lightweight CrMo axle Proven axle system- 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Low profile contoured chassis with optimised leading edge Side Support Platform Dual Engagement Mechanism SPD compatible Weight: 432gClipless Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon CS CrMo Trail Flat MTB PedalsThe Nukeproof Horizon CS CroMoCrMo Pedals are the slightly smaller version of Nukeproof's the new SPD compatible range and take inspiration from the hugely successful Horizon Pro flat pedal. They offer the optimum balance of impact strength, fatigue resistance and low weight. With design input and influence from Nukeproof's Pro team riders Matti Lehikoinen and Mike Jones, you can be sure your getting a platform that's built to win.All New SPD Cleat SystemThe SPD cleat engagement system is dual sided and unique to Nukeproof, but it does support all other brands of SPD devices too. Pedals are supplied with a cleat offering +4 degrees of float, with a +8 degree cleat available to purchase separately.Should you happen to prefer longer cleat bolts or simply to fine-tune your riding experience, you can find the Long Nukeproof Cleat Bolts HERE This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Cold forged T1- 6061 alloy body with CNC finishing Tough and lightweight CrMo axle Proven axle system- 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Low profile contoured chassis with optimised leading edge Side Support Platform Dual Engagement Mechanism SPD compatible Weight: 432gClipless Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon CS CrMo Trail Flat MTB PedalsThe Nukeproof Horizon CS CroMoCrMo Pedals are the slightly smaller version of Nukeproof's the new SPD compatible range and take inspiration from the hugely successful Horizon Pro flat pedal. They offer the optimum balance of impact strength, fatigue resistance and low weight. With design input and influence from Nukeproof's Pro team riders Matti Lehikoinen and Mike Jones, you can be sure your getting a platform that's built to win.All New SPD Cleat SystemThe SPD cleat engagement system is dual sided and unique to Nukeproof, but it does support all other brands of SPD devices too. Pedals are supplied with a cleat offering +4 degrees of float, with a +8 degree cleat available to purchase separately.Should you happen to prefer longer cleat bolts or simply to fine-tune your riding experience, you can find the Long Nukeproof Cleat Bolts HERE This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Cold forged T1- 6061 alloy body with CNC finishing Tough and lightweight CrMo axle Proven axle system- 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Low profile contoured chassis with optimised leading edge Side Support Platform Dual Engagement Mechanism SPD compatible Weight: 432gClipless Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Sam Hill Enduro Race Pedals Oil SlickThese MTB pedals feature a rock-solid aluminium platform construction, which makes them more than capable of handling all the abuse associated with all-day epics. Nukeproof has also put these through a forging and CNC-machining process, which means you'll benefit from their amazing durability without adding any unnecessary weight to your hardtail or full suspension ride. These pedals are in Nukeproof's special edition oil slick colour. Sam Hill MTB PedalsDeveloped by mountain bike legend Sam Hill and long-time mechanic Jacy Schumilak, these MTB pedals are engineered for maximum performance. Using all the proven internal parts of the Horizon Pro pedals, these signature enduro pedals spin on high-quality DU bushings with two sealed cartridge bearings. This makes the Nukeproof Sam Hill Enduro Race Pedals Oil Slick an ideal choice of upgrade for riders who want a reliable pedal stroke in all-weather conditions.Click here to view and download the Nukeproof Flat Pedal InstructionsClick here for a Step by Step Installation GuideThis pedal is fully serviceable. It can be stripped and rebuilt using the guide hereFeatures: Body Material: Forged and CNC-machined 6061-T6 Aluminium - Oil Slick Finish Axle Material: CrMo Use: MTB, Enduro Axle: 9/16" Bushings: 2x DU bushings Bearings: 4x sealed Z989 cartridge bearings (per pair) Dimensions: 111x99x18mm (LxWxD) Weight: 407g (pair, approx)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Blackline Softshell JacketCombining effortless off the bike style with on the trail performance, Nukeproof's Blackline Softshell Jacket is water-resistant, warm and breathable so you can enjoy cool and damp trail riding in comfort.The water-resistant outer fabric of the Blackline Softshell Jacket is rated to 15,000mm and with a DWR coated outer you can ride through light rain and showers before you even need to think about pulling on a hardshell jacket. This protective outer is blended with a waffle style inner liner that holds in body heat and yet it's impressively breathable to keep you comfortable and dry on even the coldest day on the trails.It's not just about the functional fabrics though, Nukeproof has got the details just right too. The adjustable hood fits over helmets for when you want some extra protection, while raglan sleeves give you the mobility needed to nail tricky tech sections. Two front pockets provide space to stash some essentials within easy reach and a zip cover at then chin boosts comfort.Finished to the highest standard with subtle embossed branding and logos the Blackline Softshell Jacket excels during and post ride, offering full coverage on and off the trails.FeaturesMaterials: 87% Polyester, 13% PolyuretaneWater-repellent and breathable softshell - waffle back fabric construction and PU membraneDWR water repellent coating on the outer fabricYKK zipsAdjustable hood fits neatly over helmetRaglan sleeves for easy movement2 Front zipped pockets with storm coversArticulated cuffs with elasticZip cover at chin for added comfortNukeproof branded pullerWaterproof: 15,000 mm - Breathability: 10,000 gsmBuy Nukeproof Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Pulse Main Mountain Bike Axle KitReplacement Nukeproof Pulse Main Axle Kit. Designed as the main pivot point, the main axle securely attaches the rear triangle to the front triangle.Features: 1 x main pivot pin 2 x main pivot spacers 1 x main pivot end cap Compatible with the Nukeproof Pulse FrameBuy Nukeproof Frame Spares from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Tested on tough enduro and downhill trails, Nukeproof’s Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof’s expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you’re sitting in the optimal riding position.PRECISION CNC MACHINED FOR STRENGTH AND TO REDUCE WEIGHTThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.OFFSET DESIGN FOR DURABILITY AND EASIER FITTINGThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.
The Nukeproof SLS spring has gone through a unique heat treatment process to alter the chemical composition of the metals. Our unique process changes the Silicium/Chromium/Steel Alloy mix to produce a super hard, yet lightweight metal that will withstand the highest demands inflicted through MTB.To prevent shock rub, the spring is bi-convex in shape. This will allow the spring to progress freely without any friction when under load.Up to 40% lighter than a steel spring, this hardened Super-light steel (SLS) spring has been designed to fit most rear shocks on the market by using Nukeproof’s unique Reducers and Spacers.Features:Hardened Super Light Steel (SLS),Bi-convex in shape,Fits most rear shocks on the market,Includes reducers and spacers,200 – 550lb range.
The Nukeproof 2.25" - 2.5" SLS spring has gone through a unique heat treatment process to alter the chemical composition of the metals.Its unique process changes the Silicium/Chromium/Steel Alloy mix to produce a super hard, yet lightweight metal that will withstand the highest demands inflicted through MTB.To prevent shock rub, the spring is bi-convex in shape. This will allow the spring to progress freely without any friction when under load.Up to 40% lighter than a steel spring, this hardened Super-light steel (SLS) spring has been designed to fit most rear shocks on the market by using Nukeproof’s unique Reducers and Spacers.Key Features:For 2.25" - 2.5" shocks,Hardened Super Light Steel (SLS),Bi-convex in shape,Fits most rear shocks on the market,Includes reducers and spacers,350lb - 600lb range,.Spring Rate / Nukeproof Super Light (SLS) Weight350lbs / 257g,400lbs / 280g,425lbs / 310g,450lbs / 313g,475lbs / 335g,500lbs / 365g,550lbs / 388g,600lbs / 427g.