Convert your Nukeproof hubs from 15mm to 9mm Quick Release with ease thanks to this Conversion kit.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Seat ClampFully designed and developed by Nukeproof's in-house engineers, this mountain bike (MTB) seat clamp ensures a no compromise, reliable and lightweight design that's also an aesthetically pleasing finishing component for your bike. It features a CNC-machined 6061 aluminium build, which removes all unnecessary material so you can benefit from a super lightweight clamp without compromising strength.A CNC stainless steel barrel, stainless steel bolt, anodised finish and laser etched graphics ensure your clamp will stay fresh and hold your seatpost securely.The clamp is a universal design but has been designed to fit perfectly with Nukeproof frames to ensure a seamless gap-free fit between the clamp and the frame.Features: Clamp Material: 6061 Aluminium CNC-machined Barrel Material: Stainless Steel Finish: Laser-etched graphics Use: All mountain (AM), Cross Country (XC), Downhill (DH), Freeride (FR)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Seat ClampFully designed and developed by Nukeproof's in-house engineers, this mountain bike (MTB) seat clamp ensures a no compromise, reliable and lightweight design that's also an aesthetically pleasing finishing component for your bike. It features a CNC-machined 6061 aluminium build, which removes all unnecessary material so you can benefit from a super lightweight clamp without compromising strength.A CNC stainless steel barrel, stainless steel bolt, anodised finish and laser etched graphics ensure your clamp will stay fresh and hold your seatpost securely.The clamp is a universal design but has been designed to fit perfectly with Nukeproof frames to ensure a seamless gap-free fit between the clamp and the frame.Features: Clamp Material: 6061 Aluminium CNC-machined Barrel Material: Stainless Steel Finish: Laser-etched graphics Use: All mountain (AM), Cross Country (XC), Downhill (DH), Freeride (FR)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ready for fast and rebellious off-road runs, this model features a polymide construction which makes it more than capable of handling all the sudden knocks and jolts from the trails. Please note: Bolts are not supplied with this model. Replacement bolt kits are available separately.
Nukeproof Horizon Seat ClampFully designed and developed by Nukeproof's in-house engineers, this mountain bike (MTB) seat clamp ensures a no compromise, reliable and lightweight design that's also an aesthetically pleasing finishing component for your bike. It features a CNC-machined 6061 aluminium build, which removes all unnecessary material so you can benefit from a super lightweight clamp without compromising strength.A CNC stainless steel barrel, stainless steel bolt, anodised finish and laser etched graphics ensure your clamp will stay fresh and hold your seatpost securely.The clamp is a universal design but has been designed to fit perfectly with Nukeproof frames to ensure a seamless gap-free fit between the clamp and the frame.Features: Clamp Material: 6061 Aluminium CNC-machined Barrel Material: Stainless Steel Finish: Laser-etched graphics Use: All mountain (AM), Cross Country (XC), Downhill (DH), Freeride (FR)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
All set for rowdy and rebellious off-road adventures, this fantastic version features a polymide construction which makes it perfect at withstanding all the intensity that comes with all-day epics in the mountains. Please note: Bolts are not supplied with this model. Replacement bolt kits are available separately.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Front 15mmThis thru-axle is designed as a direct replacement for the standard thru-axles found in 15mm Rockshox Boost forks as well as most models of 15mm Boost Fox forks. It features a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike (MTB). This makes it a great choice of upgrade for riders who need to replace their damaged or lost stock axle on their forks.The axle has a washer which helps reduce pressure on the fork legs and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness, while preventing the axle from getting stuck when you want to remove it.All axles are a 6mm hex on the non-drive side and have a backup 6mm hex on the drive-side, allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Please Note: Not compatible with 2021 Fox 36mm / 38mm forks Diameter Axle Length Thread Pitch Thread Length RockShox 15mm Boost 158mm 1.5 10mm Fox 15mm Boost Not compatible with 2021 36mm / 38mm 155mm 1.5 13.5mm Click here for Nukeproof's technical information.Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving 6mm Hex head at both axle ends for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Front 15mmThis thru-axle is designed as a direct replacement for the standard thru-axles found in 15mm Rockshox Boost forks as well as most models of 15mm Boost Fox forks. It features a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike (MTB). This makes it a great choice of upgrade for riders who need to replace their damaged or lost stock axle on their forks.The axle has a washer which helps reduce pressure on the fork legs and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness, while preventing the axle from getting stuck when you want to remove it.All axles are a 6mm hex on the non-drive side and have a backup 6mm hex on the drive-side, allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Please Note: Not compatible with 2021 Fox 36mm / 38mm forks Diameter Axle Length Thread Pitch Thread Length RockShox 15mm Boost 158mm 1.5 10mm Fox 15mm Boost Not compatible with 2021 36mm / 38mm 155mm 1.5 13.5mm Click here for Nukeproof's technical information.Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving 6mm Hex head at both axle ends for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
For their Neutron Half Waffle Lock On Grips, Nukeproof has adopted a race proven shape with an MX inspired half waffle grip pattern. Also, by using a low profile and a soft rubber compound, Nukeproof ensured that these grips offer optimised trail feedback without compromising on comfort. The locking mechanisms on either end provide a secure connection with the bar and the durable A25 Kraton rubber not only offers excellent grip, it ensures a long lifespan.Key Features:Material: A25 Kraton Soft Rubber Compound,Dual locking mechanisms,Low profile,Length: 142mm,Outer Diameter: 31mm,Built For: Trail, all-mountain, enduro, downhill, freeride,Weight: 110g (pair).
This is a genuine replacement gear hanger, compatible with all Nukeproof Digger Frames.
The mount will allow you to mount your Garmin or Wahoo ELEMNT in a safer place than your handlebars which is ideal for Enduro and downhill riding but is also suitable for use on any bike with a 1 1/8” steerer. Installation guide can be found here.
Fully designed and developed by Nukeproof's in-house engineers, this mountain bike (MTB) seat clamp ensures a no compromise, reliable and lightweight design that's also an aesthetically pleasing finishing component for your bike. It features a CNC-machined 6061 aluminium build, which removes all unnecessary material so you can benefit from a super lightweight clamp without compromising strength.A CNC stainless steel barrel, stainless steel bolt, anodised finish and laser etched graphics ensure your clamp will stay fresh and hold your seatpost securely.The clamp is a universal design but has been designed to fit perfectly with Nukeproof frames to ensure a seamless gap-free fit between the clamp and the frame.
Nukeproof Sam Hill Series Handlebar GripsNukeproof's Sam Hill Series Handlebar Grips have been designed for winning. Sam Hill needs no introduction, regarded as one of the best downhill riders of all time, he is a champion winner, who knows what grips are the best tools for the trail.The Sam Hill Signature series is a no-compromise range of race-ready components chosen by Sam as the tools for the job. Sam has always been particular about his setup and Nukeproof has taken great pride in developing no-nonsense, custom products for Sam with some innovation even coming from his motocross bike! Together, we have helped to produce World level products that everyone can use.The entire Sam Hill Signature Series also feature matching graphics which were inspired by Sam himself.Features:Compound: Custom soft Kraton rubber diamond texture grip with Sam Hill signature and half-waffle patternGraphics: Laser-etched Sam Hill Series graphics on the lockrings and bar endsOuter Diameter: 31.5mm (including waffle)Width: 135mmBuild for: DH/FRLock-on Grips instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Scout Derailleur HangerGenuine Nukeproof replacement derailleur hanger for the 2015 Scout frame. Buy Nukeproof Frames from Chain Reaction Cycles, the World's Largest Online Bike Store.
In comparison to their firmer "Endurance" model, which aims to be as durable as possible, this "Race" model uses a much softer and grippier A15 Kraton compound to help you maintain your hand position. Ultimate Comfort and Control The Horizon Race grips also feature a unique, multidirectional, and tapered grip pattern that provides a cushioning effect in key areas and grip in all directions. So, whether you prefer to ride with or without gloves, you'll enjoy consistent and comfortable grip no matter how hard you're pushing yourself! Locked on and Supportive With lockrings on either end, these grips are going nowhere. Even as you throw yourself into the berms and land the biggest jumps, they'll maintain a secure connection with the bar. These grips have an asymmetrical inner flange to provide support without obstructing access to your shifter.
Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 – 3mm wider than your inner rim width. Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valve
Nukeproof Tubeless MTB Rim Tape (10m)This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 - 3mm wider than your inner rim width Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valveFeatures: Length: 10m Suitability: Downhill, Enduro Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Tubeless MTB Rim Tape (10m)This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 - 3mm wider than your inner rim width Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valveFeatures: Length: 10m Suitability: Downhill, Enduro Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.