This thru-axle is designed as a direct replacement for the standard thru-axles found in 15mm RockShox Boost forks as well as most models of 15mm Boost Fox forks. It features a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike (MTB). This makes it a great choice of upgrade for riders who need to replace their damaged or lost stock axle on their forks.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Hex head at both axle ends for easy fitting & removalColour: BlackSize: 158mm x P1.5 x 10mm (Rockshox Boost), 155mm P1.5 x 13.5mm (Fox Boost)Option: RockShox Boost, Fox BoostThe axle has a washer which helps reduce pressure on the fork legs and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness, while preventing the axle from getting stuck when you want to remove it.All axles are a 6mm hex on the non-drive side and have a backup 6mm hex on the drive-side, allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Please Note: Not compatible with 2021 Fox 36mm / 38mm forks.
This thru-axle is designed as a direct replacement for the standard thru-axles found in 15mm RockShox Boost forks as well as most models of 15mm Boost Fox forks. It features a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike (MTB). This makes it a great choice of upgrade for riders who need to replace their damaged or lost stock axle on their forks.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Hex head at both axle ends for easy fitting & removalColour: BlackSize: 158mm x P1.5 x 10mm (Rockshox Boost), 155mm P1.5 x 13.5mm (Fox Boost)Option: RockShox Boost, Fox BoostThe axle has a washer which helps reduce pressure on the fork legs and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness, while preventing the axle from getting stuck when you want to remove it.All axles are a 6mm hex on the non-drive side and have a backup 6mm hex on the drive-side, allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Please Note: Not compatible with 2021 Fox 36mm / 38mm forks.
This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.
This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.
This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.
This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.
This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.
This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.
This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.
This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.
The Nukeproof Horizon Accessory Strap is an ideal on-bike storage solution that's durable and versatile for mounting spares, tubes or a pump to one of your bike's bottle cage mount points.Back plate colours: Black, Red, Blue, Purple, Grey, CopperStrap colour: BlackAdjustment: The mounting plate allows for 20mm of adjustmentStrap lengths:50mm x 314mm38mm x 265mm38mm x 130mmGot a bike with mounting holes for an accessory plate or got a bottle cage mounting point not being used This Nukeproof Horizon accessory strap will be the perfect fit on your bike. The kit comes with an alloy backplate and 3 different lengths of strap allowing you to carry some spares on your ride. The longest strap allows an inner tube, 25g CO2 canister, small pump like LifeLine Hybrid CO2 Mini Pump - MTB & Nukeproof tubeless repair kit. The shortest strap can also be used along with the Nukeproof Horizon carbon water bottle cage allowing you to carry a CO2 canister or small diameter pump. The 2021 Nukeproof Mega & Giga bikes all have mounting holes under the top tube making this kit fully compatible.
The Nukeproof Horizon Accessory Strap is an ideal on-bike storage solution that's durable and versatile for mounting spares, tubes or a pump to one of your bike's bottle cage mount points.Back plate colours: Black, Red, Blue, Purple, Grey, CopperStrap colour: BlackAdjustment: The mounting plate allows for 20mm of adjustmentStrap lengths:50mm x 314mm38mm x 265mm38mm x 130mmGot a bike with mounting holes for an accessory plate or got a bottle cage mounting point not being used This Nukeproof Horizon accessory strap will be the perfect fit on your bike. The kit comes with an alloy backplate and 3 different lengths of strap allowing you to carry some spares on your ride. The longest strap allows an inner tube, 25g CO2 canister, small pump like LifeLine Hybrid CO2 Mini Pump - MTB & Nukeproof tubeless repair kit. The shortest strap can also be used along with the Nukeproof Horizon carbon water bottle cage allowing you to carry a CO2 canister or small diameter pump. The 2021 Nukeproof Mega & Giga bikes all have mounting holes under the top tube making this kit fully compatible.
The Nukeproof Horizon Accessory Strap is an ideal on-bike storage solution that's durable and versatile for mounting spares, tubes or a pump to one of your bike's bottle cage mount points.Back plate colours: Black, Red, Blue, Purple, Grey, CopperStrap colour: BlackAdjustment: The mounting plate allows for 20mm of adjustmentStrap lengths:50mm x 314mm38mm x 265mm38mm x 130mmGot a bike with mounting holes for an accessory plate or got a bottle cage mounting point not being used This Nukeproof Horizon accessory strap will be the perfect fit on your bike. The kit comes with an alloy backplate and 3 different lengths of strap allowing you to carry some spares on your ride. The longest strap allows an inner tube, 25g CO2 canister, small pump like LifeLine Hybrid CO2 Mini Pump - MTB & Nukeproof tubeless repair kit. The shortest strap can also be used along with the Nukeproof Horizon carbon water bottle cage allowing you to carry a CO2 canister or small diameter pump. The 2021 Nukeproof Mega & Giga bikes all have mounting holes under the top tube making this kit fully compatible.
The Nukeproof Horizon Accessory Strap is an ideal on-bike storage solution that's durable and versatile for mounting spares, tubes or a pump to one of your bike's bottle cage mount points.Back plate colours: Black, Red, Blue, Purple, Grey, CopperStrap colour: BlackAdjustment: The mounting plate allows for 20mm of adjustmentStrap lengths:50mm x 314mm38mm x 265mm38mm x 130mmGot a bike with mounting holes for an accessory plate or got a bottle cage mounting point not being used This Nukeproof Horizon accessory strap will be the perfect fit on your bike. The kit comes with an alloy backplate and 3 different lengths of strap allowing you to carry some spares on your ride. The longest strap allows an inner tube, 25g CO2 canister, small pump like LifeLine Hybrid CO2 Mini Pump - MTB & Nukeproof tubeless repair kit. The shortest strap can also be used along with the Nukeproof Horizon carbon water bottle cage allowing you to carry a CO2 canister or small diameter pump. The 2021 Nukeproof Mega & Giga bikes all have mounting holes under the top tube making this kit fully compatible.
The Nukeproof Horizon Accessory Strap is an ideal on-bike storage solution that's durable and versatile for mounting spares, tubes or a pump to one of your bike's bottle cage mount points.Back plate colours: Black, Red, Blue, Purple, Grey, CopperStrap colour: BlackAdjustment: The mounting plate allows for 20mm of adjustmentStrap lengths:50mm x 314mm38mm x 265mm38mm x 130mmGot a bike with mounting holes for an accessory plate or got a bottle cage mounting point not being used This Nukeproof Horizon accessory strap will be the perfect fit on your bike. The kit comes with an alloy backplate and 3 different lengths of strap allowing you to carry some spares on your ride. The longest strap allows an inner tube, 25g CO2 canister, small pump like LifeLine Hybrid CO2 Mini Pump - MTB & Nukeproof tubeless repair kit. The shortest strap can also be used along with the Nukeproof Horizon carbon water bottle cage allowing you to carry a CO2 canister or small diameter pump. The 2021 Nukeproof Mega & Giga bikes all have mounting holes under the top tube making this kit fully compatible.
Featuring an adapted head which allows the tyre insert to sit on top of the valve, the shape of the head allows for easy inflation and deflation. Each valve has a removable core allowing you to get maximum air flow from your tubeless pump or CO2 cartridge. The specially-designed custom cap features a core remover built in so you can remove & tighten the core without any additional tools. The nut has also been designed so that you can get a good grip on the flat edges to tighten the valve in the rim. An O-ring is also provided which sits against the outside of the rim and provides an airtight seal while preventing damage to the rim from the nut on the valve. How to Install Remove valve cap and nut, insert valve through rim, fit O-ring to valve then thread nut on and tighten by hand.
If you want to restore your Horizon CS pedal's peformance to its original level, this genuine replacement Nukeproof rebuild kit is sure to do the job.
Following on from the success of the Nukeproof A15 durometer Sam Hill Series Grips, which Sam rode to overall EWS victory in 2017, Sam asked Nukeproof to develop an even softer compound for long days on the bike riding the toughest Enduro stages in the world. These are Sam’s special edition oil slick clamp version. Perfect for Enduro Racing Extra Soft Compound Sam has always been particular about his setup and Nukeproof has taken great pride in developing no-nonsense, custom products for Sam with some innovation even coming from his motocross bike! Together, they have helped to produce World level products that everyone can use. These grips were first used by Sam in round 4 of the 2018 EWS where he took the win and has been using them ever since. After that race he described the compound as “extra extra soft, semi throttle durometer” and described the grips as “pretty comfortable little things”. With comments like that we knew we were onto a winner with these grips.
Nukeproof use 100% recycled S.Café fabric for their Blackline Jerseys. This fabric is made by combining coffee grounds (which are created from our everyday coffee drinking) with 100% recycled yarn. Not only are you being eco-friendly but due to the advanced properties of S.Café you'll benefit from enhanced moisture management for a fresh feel all day. S.Café technology also boasts a 200% faster drying time when compared to cotton so you won’t suffer from chills from cold sweat build up. Lastly, with its natural UV protection and an anti-bacterial finish, this is a jersey ideally suited to hitting the summer trails. Practicality isn't overlooked either, Nukeproof have added a side zipped pocket, ideal for small valuables, and with an audio port for headphones, you can stow an MP3 player and enjoy some tunes. With a distinctive design using sublimation and screen printed graphics, you'll have a jersey that looks good for the long haul. Nukeproof Blackline Range Fully designed and developed by The Nukeproof team in Belfast, they use the highest quality fabrics, great MTB inspired cut/fit and have all the features they wanted out of their ride apparel. The Blackline range is their premium trail collection.
Nukeproof Blackline Women's Long Sleeve JerseyGet ready to hit the trails hard in the Nukeproof Blackline Women's Long Sleeve Jersey. Crafted from a breathable fabric that is quick-drying and moisture-wicking to keep you cool on even the toughest of rides.Nukeproof use 100% recycled S.Café fabric for their Blackline Jerseys. This fabric is made by combining coffee grounds (which are created from our everyday coffee drinking) with 100% recycled yarn. Not only are you being eco-friendly but due to the advanced properties of S.Café you'll benefit from enhanced moisture management for a fresh feel all day. S.Café technology also boasts a 200% faster drying time when compared to cotton so you won’t suffer from chills from cold sweat build up. Lastly, with its natural UV protection and an anti-bacterial finish, this is a jersey ideally suited to hitting the summer trails.Practicality isn't overlooked either, Nukeproof have added a side zipped pocket, ideal for small valuables, and with an audio port for headphones, you can stow an MP3 player and enjoy some tunes. With a distinctive design using sublimation and screen printed graphics, you'll have a jersey that looks good for the long haul.Nukeproof Blackline RangeFully designed and developed by The Nukeproof team in Belfast, they use the highest quality fabrics, great MTB inspired cut/fit and have all the features they wanted out of their ride apparel.The Blackline range is their premium trail collection.Features:Materials: 100% PolyesterMesh: 88% Polyester, 12% ElastaneSublimated recycled S.Cafe fabric on front and sleevesFull mesh back and underarm panels for breathabilityMoisture-wicking and quick-dryingAnti-bacterial finish on garment for odour resistanceCrew neckSet-in sleevesDropped back hemNukeproof brandingBuy Nukeproof Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.