Nukeproof Urchin Youth SaddleTried and tested by the Nukeproof team's very on children, the Urchin saddle has been carefully shaped to suit the specific needs of younger riders, giving comfort that lasts on day long trail sessions.Kids Comfortable SaddleThis kids mountain bike saddle is 137mm wide and uses light, high-density foam for maximum comfort & wear. It features a hard-wearing cover, which is perfect at handling multiple changes to riding positions and the demands that a younger rider will put on the saddle.Features: Foam: Light, high-density foam Width: 137mm Length: 258mm Rail Size: 7mm Available in Black, Red, Blue, Purple Weight: Approx 291gBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Urchin Youth SaddleTried and tested by the Nukeproof team's very on children, the Urchin saddle has been carefully shaped to suit the specific needs of younger riders, giving comfort that lasts on day long trail sessions.Kids Comfortable SaddleThis kids mountain bike saddle is 137mm wide and uses light, high-density foam for maximum comfort & wear. It features a hard-wearing cover, which is perfect at handling multiple changes to riding positions and the demands that a younger rider will put on the saddle.Features: Foam: Light, high-density foam Width: 137mm Length: 258mm Rail Size: 7mm Available in Black, Red, Blue, Purple Weight: Approx 291gBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Sam Hill Enduro Saddle Oil SlickReady for shredding the trails and beyond, this high-quality saddle was designed in conjunction with MTB legend Sam Hill. It features a 143mm width and a central cut-out to help relieve pressure around your sit-bones. This means that you can enjoy the ride for much longer than before without worrying about suffering from fatigue. Nukeproof has gone the extra distance by also equipped this model with its lightweight foam padding, so you can benefit from all of the necessary support needed for all-day epics in the mountains. Coming complete with a durable vacuum-formed and water-repellent microfibre cover, this version offers exceptional comfort and protection in all-weather conditions.Sam Hill Saddle with Low Stack HeightThe high-quality saddle has a low stack height, approx. 8mm lower than standard rails which means you aren't using unnecessary space which could be better utilised with a longer dropper post. The saddle also has an ergonomic shape and all edges are rounded to ensure that the saddle is as comfortable from a cycle in the park to the EWS stage.Please note: Due to the anodising process, the oil slick colouring can vary depending on the position, conditions and even how it catches the light, so not oil slick components are the same. Images are for illustration purposes only and there is unfortunately no way to guarantee the oil slick design on specific items.Features: Base Material: Glass Fibre-reinforced Nylon Cover Material: Microfibre Rail Material: CrMo Ti Padding: Airform lightweight Foam Intended Use: Trail, All Mountain, Enduro, Downhill and Freeride Rail Dimensions: 7mm Weight: 261gBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon SL CrMo RailDesigned with the help from Nukeproof downhill (DH) and enduro pro riders, this mountain bike (MTB) saddle ensures riders experience superior comfort combined with lightweight performance. It features an ergonomic design that uses a combination of different densities of super-light foam to offer maximum comfort without increasing weight. Another highlight is its curved rear section that's designed to hold you in an optimised pedalling position on long climbs and to provide more tyre clearance for longer travel bikes. It has been finished with a durable vacuum-formed water repellent microfibre cover so that even on wet days it will be comfortable.Features: Cover Material: Microfibre Shell Material: Glassfibre-reinforced Nylon Rails Material: Chromoly (CrMo) Steel Padding: Dual-density lightweight foam Use: Trail, All Mountain (AM), Enduro, Downhill (DH), Freeride (FR) Dimensions: 134x260mm (WxL)Manufacturer's Part Number: 80194500020Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Direct Mount Mountain Bike StemThe Horizon DM Stem is based on the Nukeproof Sam Hill direct mount stem, which was developed in conjunction with the 5-time Downhill World Champion. It shares the same stiffness and strength, but in a slightly longer 45mm length. It also features extensive CNC machining to the 6061 aluminium, ensuring outstanding stiffness and a very low weight. A perfect match to the Nukeproof Horizon bars, the Horizon DM Stem is finished off with huge M6 bolts throughout for extra security, making this the perfect option for the most aggressive downhill riders.Features: Material: 6061 Aluminium Extensively CNC-machined to reduce weight Oversized M6 bolts throughout Bar Clamp Diameter: 31.8mm Rise: 30 degrees Use: Downhill Weight: 145gDirect Mount Stem instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron AM StemConstructed with high-quality 6061 aluminium and cold-forged to optimise its strength, Nukeproof has ensured the Neutron AM stem is ready for anything. It’s strong enough for the toughest downhill trail, yet as it has also been CNC machined to remove unnecessary weight its light enough for trail rides too.Ultimate Strength and StiffnessNukeproof has redesigned the four-bolt faceplate system to shave some weight whilst retaining strength, which offers maximum security against bar slippage. The ultra-wide clamping area provides exceptional stiffness and security, and the low stack height provides more cockpit tuning possibilities.Features: Material: 6061 Alloy Stack Height: 40mm Offset: 0 deg Mounting System: Standard 6 bolt Invertible: No Compatibility: 1 1/8" steerers and separate 31.8mm or 35mm bar clamp options Stem Cap Included: No Weight: 185gBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron Direct Mount Mountain Bike StemThe Nukeproof Neutron Direct Mount Stem is cold-forged from high-grade 6061 aluminium for optimum strength. It features extensive CNC machining to shave off excess material and is specifically built to tackle the gnarliest of DH trails.Ultimate Strength and StiffnessNukeproof has redesigned the four-bolt faceplate system to shave some weight whilst retaining strength to offer maximum security against bar slippage. The ultra-wide clamping area provides exceptional stiffness and security, and the direct mount attachment provides a clean finish when mounted to your dual crown DH forks.Features:Material: 6061 AlloyBolts: Oversized M6 for secure connection to the forkLength: Adjustable between 47mm - 52mmRise: 30°Weight: 160gDirect Mount Stem instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Sam Hill Horizon StemThe Nukeproof Horizon Stem is the newest addition to the Nukeproof cockpit component range. Developed alongside Sam Hill, Nukeproof sponsored athletes and staff, the Horizon stem has been tested in the most demanding Enduro and Downhill conditions. Nukeproof has optimised this stem to be lightweight and ultra-strong and this Sam Hill Signature version also comes with Ti bolts and is finished off with Sam's signature logo laser etched into it. Precision CNC MachinedThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Modern MTB Stem with a Clean LookThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with "no gap" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and is also included within the stem packaging.To ensure correct torque can be achieved, stem steerer bolts must be greased before installation on the bike.Features: Precision CNC-machined Ti Bolts throughout Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Bar Clamp: 31.8mm Steerer Diameter: 1 1/8" Length: 35mm, 50mm, 60mm Rise: +/- 5mm Stack Height: 35mm Weight: 118g (31.8 x 35mm), 161g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Sam Hill Horizon Oil Slick StemDeveloped alongside MTB legend Sam Hill, Nukeproof sponsored athletes and staff, the Horizon stem has been tested in the most demanding Enduro and Downhill conditions. Optimised to be lightweight and ultra-strong, this Sam Hill Signature model also comes equipped with Ti bolts and is finished off with Sam's signature logo laser-etched into it. The result is an eye-catching stem that's reliable and looks as awesome as it performs as you weave between the MTB trails at speed. This is the special edition oil slick colour version.Precision CNC MachinedThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Modern MTB Stem with a Clean LookThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The faceplate has also been designed specifically with "no gap" at the top to give it a clean look and to make the fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging.To ensure correct torque can be achieved, stem steerer bolts must be greased before installation on the bike.Features: Precision CNC-machined Ti Bolts throughout Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Bar Clamp: 31.8mm Steerer Diameter: 1 1/8" Length: 35mm, 50mm Rise: +/- 5mm Stack Height: 35mm Weight: 118g (31.8 x 35mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron Top Headset CupThis Nukeproof headset is compatible with the bearings from the Nukeproof Steel Bearing or the upgraded Nukeproof Ti coated bearing with stainless balls. Designed to ensure the highest performance for tough and challenging conditions, these headsets have been engineered with durability and quality in mind.The latest generation of headsets has been revised, improved and expanded for optimum fit, sealing and performance as well as compatibility with a wide range of fork and frame standards. Featuring sealed angular contact bearings, split alloy crown races and upper and lower bearing cups CNC-machined from proprietary aluminium, the headset offers the optimum balance of lightweight, strength and durability for performance across all riding disciplines.The is available in a range of options to cover multiple fork/headtube configurations, including a full range of Standard Steerer (SS–1-1/8') and Tapered Steerer (TS–1-1/8' to 1.5') combinations. Internal and external cup options also available including zero-stack versions with internal top and bottom cups.All models feature a super tough black hard anodised finish, with laser-etched graphics.Don't know which headset you need? No problem! Simply use our Headset Technical Guide which includes a Headset Finder.Features:Specific Top Headset cupReplaceable angular contact bearingsLaser-etched graphics (including code)Split Alloy Crown Race for easy installation/removal Hard Anodised FinishInternal and external optionsReducer crown race for 1.5' availableBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron Top Headset CupThis Nukeproof headset is compatible with the bearings from the Nukeproof Steel Bearing or the upgraded Nukeproof Ti coated bearing with stainless balls. Designed to ensure the highest performance for tough and challenging conditions, these headsets have been engineered with durability and quality in mind.The latest generation of headsets has been revised, improved and expanded for optimum fit, sealing and performance as well as compatibility with a wide range of fork and frame standards. Featuring sealed angular contact bearings, split alloy crown races and upper and lower bearing cups CNC-machined from proprietary aluminium, the headset offers the optimum balance of lightweight, strength and durability for performance across all riding disciplines.The is available in a range of options to cover multiple fork/headtube configurations, including a full range of Standard Steerer (SS–1-1/8') and Tapered Steerer (TS–1-1/8' to 1.5') combinations. Internal and external cup options also available including zero-stack versions with internal top and bottom cups.All models feature a super tough black hard anodised finish, with laser-etched graphics.Don't know which headset you need? No problem! Simply use our Headset Technical Guide which includes a Headset Finder.Features:Specific Top Headset cupReplaceable angular contact bearingsLaser-etched graphics (including code)Split Alloy Crown Race for easy installation/removal Hard Anodised FinishInternal and external optionsReducer crown race for 1.5' availableBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron Bottom Headset CupNukeproof's Neutron Bottom Headset Cup is now available as both separate top and bottom cups, so you can choose the option that you need. The cups will allow you to replace only the bearings with the Nukeproof Steel Bearing or the upgraded Nukeproof Ti coated bearing with stainless balls. Precision-engineered to the most exacting of tolerances to deliver optimum performance and long life in harsh riding conditions.The latest generation of headsets has been revised, improved and expanded for optimum fit, sealing and performance as well as compatibility with a wide range of fork and frame standards. Featuring sealed angular contact bearings, split alloy crown races and upper and lower bearing cups CNC-machined from proprietary aluminium, the headset offers the optimum balance of lightweight, strength and durability for performance across all riding disciplines.The headset is available in a range of options to cover multiple fork/headtube configurations, including a full range of Standard Steerer (SS – 1-1/8') and Tapered Steerer (TS – 1-1/8' to 1.5') combinations. Internal and external cup options also available including zero-stack versions with internal top and bottom cups.All models feature a super tough black hard anodised finish, with laser-etched graphics.Don't know which headset you need? No problem! Simply use our Headset Technical Guide which includes a Headset Finder. Features:Specific Bottom Headset cupReplaceable angular contact bearingsLaser-etched graphics (including code)Split Alloy Crown Race for easy installation/removal Hard Anodised FinishInternal and external optionsReducer crown race for 1.5' availableBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.