These grips feature a soft, very grippy compound, which makes them perfect for long days riding and sure to provide excellent grip regardless of the weather conditions. These grips have been used by Sam when riding the toughest stages in the world of MTB racing, in the most demanding conditions. Featuring an Enduro race compound, these grips are designed for enduro race days to give excellent grip and comfort, this does mean they will wear quicker than the A15 Sam Hill Grips. Perfect for World Level Racing and Weekend Trail Sessions Alike Nukeproof and Sam Hill work together to create World Level products that everyone can use. The Sam Hill Enduro Race Grip was first used by Sam in round 4 of the 2018 Enduro World Series (EWS) where he took the win and has been using them ever since. After that race, he described the compound as “extra extra soft, semi throttle durometer” and described the grips as “pretty comfortable little things”. With comments like that we knew we were onto a winner with these grips. Nukeproof Sam Hill Enduro Race Grip installation instructions are available for download HERE.
Part of the ABEC-5 line, these bearings are the revised LLU/LLB dual seal bearings. They place an LLU full contact seal on their outside facing surface, while the Inboard facing LLB medium contact seal allows for less drag. Their specific seal also increases their lifespan and offers exceptional performance. High precision balls are within 5/1,000,000″ round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade. The Nukeproof Enduro 61805 ABEC5 V2 Hub Bearing Pair is only suitable for converting the front hub of the Nukeproof Horizon V2 and Neutron V2 from 15mm to 20mm axles. This bearing will also fit many other hubs that use this size of bearing. This superb bearing sets the benchmark for high precision bearings.
Genuine replacement Nukeproof spare parts.
Genuine Nukeproof high-quality spare parts.
Weighing in at only 38g, this tubeless repair kit is extremely lightweight and easy to carry or pack away in your backpack for your rides. It features a tool capsule that doubles up as a handle for the plug insertion tool. On the inside of the threaded section there is a valve core remover hidden away. On the opposite end, the hole has been designed to loosen stuck Presta valve nuts, which can be tricky to open if there is old sealant in the valve. The plugs are super tacky, so they do not require you to use additional glue. Spare plugs are available here.
Tested to the limit in all possible conditions by some of the world’s toughest and most demanding riders, Nukeproof disc pads will outperform the competition in wet weather or dry. No nonsense, High quality, High power braking with excellent modulation. Custom-manufactured in Taiwan to Nukeproof's exact standards.
The additional padding of this Neutron Saddle ensures maximum comfort even during the most epic days in the mountains, hills and forests. The Neutron saddle features tough CrMo rails and as durability is a key consideration, Nukeproof has utilised a tough microfabric cover within its construction. This saddle is lightweight and suits a wide range of rider shapes and sizes, which makes it an ideal saddle for any trail riding discipline.
The Nukeproof Over Stem mount has been fully designed in house to install your Garmin and Wahoo Element computers to your bike. Designed specifically around our Horizon stem to ensure a clean and snug fit, the mount will also fit most other stem models as well. This will suit riders wishing to place their computer ahead of the steerer tube for more visibility but not in front of the bars where the computer can be vulnerable to impacts while Enduro or Downhill riding. To install the mount to your bike, you will need 7mm of excess steerer tube above your stem and is very easy to install. Remove current top cap and bolt Ensure you have at least 7mm of excess steerer Place Over Stem mount to steerer tube Fit any additional headset spacers if required Install polymer ¼ turn insert in orientation to suit Garmin or Wahoo Reinstall top cap and bolt
A genuine high-quality frame spare from Nukeproof that is easy to fit and gets you back on the trails again in no time. Suitable for the 2016 to 2020 model's only.
This kit contains the parts required to replace your Nukeproof pedal bindings. The binding in this kit is the upgraded version which is more secure and helps prevent accidentally unclipping. This kit will fit all Nukeproof Horizon CS & CL pedals. A guide for rebuilding your Nukeproof clipless pedal can be found here
Compatible with the 2021-2022 Nukeproof Megawatt.
Replacement Dissent Rear Horse Shoe Kit, that is compatible with the 2020-2022 Nukeproof Dissent frame.
This part has a tough and durable construction and it has recesses to reduce excess material without compromising the structural integrity.
This is a Nukeproof precision engineered replacement Maxle dropout, which is designed specifically to hold a 135mm Maxle in the 2011 Snap frame. Tough durable construction with recesses to reduce excess material without compromising structural integrity.
Full replacement Nukeproof Mega AM Bottom Swinglink Axle Kit.
This handy kit is an ideal backup for when the metric shock mounting bolts on your Nukeproof Mega Carbon succumb to the abuse of your big and bold riding on the toughest terrains.
Nukeproof precision-engineered replacement Syntace Dropout designed specifically to hold a 142mm axle in the 2011 Snap frame. It has a tough and durable construction with recesses, which reduce excess material without compromising structural integrity.
This kit includes - a tap allowing you to grip the bushing and remove it - an installation tool allowing you to push the new bushing into the pedal body
Nukeproof Blackline Short Sleeve JerseyThe Nukeproof Blackline Short Sleeve Jersey is fully updated so it's better than ever. The jersey blends two Italian made performance fabrics to ensure the jersey performs where needed - when you're ripping along mountain bike trails.The front body and sleeves of the Blackline Short Sleeve Jersey are constructed from a lightweight fabric (115gsm), highly breathable yarn that is super soft against the skin. Its mono stretch piquet fabric allows unrestricted movement and the increase wicking moisture alongside minimised drying manages your riders core temperature. It’s also abrasive resistant to ensure the Blackline Jersey stays looking fresh.The super lightweight (110 GSM) warp-knit back panel regulates body temperature by maximising the airflow out of the body and is both quick wicking and fast drying. The jersey is a trail fit, so designed to be worn loose against the body. Lastly, with its natural UV protection and an anti-bacterial finish, this is a jersey ideally suited to hitting the summer trails.Nukeproof have committed to using Bluesign® fabrics. This is a solution for sustainable textile production. It eliminates harmful substances right from the beginning of the manufacturing process and sets and controls standards for environmentally friendly and safe production.Nukeproof BlacklineFully designed and developed by The Nukeproof team in Belfast, they use the highest quality fabrics, great MTB inspired cut/fit and have all the features they wanted out of their ride apparel. The Blackline range is their premium trail collection.Features:Materials: 100% PolyesterHigh-Performance trail jersey made in EuropeMoisture-wicking and quick-dryingAnti-bacterial finish on garment for odour resistanceCrewneckSet-in sleevesDropped back hemNukeproof brandingUV protectionBluesign® Approved - Eco-Tech CertifiedBuy Nukeproof Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.