Actually, size is everything! And you get to decide how to use it: Short - as an all-year-round shock guard,Long - for full-length protection, when it gets mudtastic.Each MugGuard is made in the UK using 100% recycled plastic and comes with re-useable VELCRO® fasteners, so you can attach it to your pride and joy with ease.In short mode, it works mighty fine as an all-year-round guard, protecting your rear shock and magnificent calves against splatter and matter, thrown by the back wheel.And when the weather turns to sh**, simply whip out and attach the extension for full-length protection.Full sus or hardtail, the MugGuard works impeccably on both. And is compatible with 26" to 29" wheel diameters and tyres up to 3" wide... possibly a tad more.Using its innovative dial feature, tune the guard's angle to achieve the desired clearance with your rear tyre. Each arm has a rubber base, for maximum grip on your seat stays and to protect your bike's precious paintwork. We are always looking for ways to eliminate single-use plastic and waste from our products and packaging. And the MugGuard, Rear is no exception. There isn't a piece of single-use plastic in sight. The MugGuard arrives in a reusable, snazzy kit bag. Itself, made from recycled plastic bottles and adorned with our favourite, genuine, UK pub names. Cheers!
Frame Skinz, Clear is specifically designed to discreetly provide bomb-proof frame protection for your bike's exposed areas against impact and wear, commonly picked up on the trails and in transit. The seventeen patches can be used independently or in harmony, letting you decide what areas to protect.FeaturesHigh performance and eco savvy clip, clout, clobber, chip, chafe, crash protection for your precious bike bits,Universal fitting: suitable for alloy and carbon frames,Super clean and easy installation and removal,Exceptional clarity and stylish designs,Proudly designed and manufactured in the UK; the land of muck.MaterialWe spent forever (and a bit longer), sourcing the right materials but we are happy as pigs in (muck) with the end product and hope you will be too. Using materials normally used on Motocross, Karts, ATVs, Snowmobiles and Jet Skis with a strong, clear pressure-sensitive adhesive that is super clean to apply and remove, the end result is a 300 micron composite vinyl (that's metric by the way), that offers outstanding performance and crystal clear graphics while also being pliable enough to conform to the endless contours of each and every bike frame. EcoDid we say the vinyl is Cadmium-free? WTF is that, you may ask. Straight from https://www.greenfacts.org/en/cadmium/ Normally found in PVC materials, Cadmium is toxic to plants, animals and micro-organisms. Being a simple chemical element, Cadmium is persistent – it cannot be broken down into less toxic substances in the environment. Basically, it's not very nice so we got rid of it. If that's not enough, with graphics printed using eco-friendly ink and sandwiched in-between the vinyl layers for added protection, the end product is bundled inside its dedicated recycled cardboard packaging, keeping it safe while it heads to you. Contents1 x top tube/down tube protector,2 x top tube/down tube protector joints,8 x top tube/down tube/seat tube patches,2 x stay protectors,4 x cable rub patches.FitThe 17 patches, ranging from 32 x 28mm to 330 x 65mm, are compatible with most bikes... not just mountain bikes.
Meet the Mucky Nutz MugGuard... our super, snazzy, award-winning mudguard for mountain bikes, made in the UK from 100% recycled plastic.Living in the land of muck, we have the perfect testing ground for designing and developing a high performing muck-muncher and it's fair to say we're pretty chuffed with the result... an award-winning, eco-savvy mudguard aka MugGuard.CompatibilityDesigned to fit 26-29 inch standard and boost suspension forks with tyres up to 3 inch wide.It can also be used as a rear mudguard on some frames but this is not guaranteed, so please get in touch if unsure.Design FeaturesForward lip to catch and minimise spray.,Sharp trailing edge to cut cloggy soil away from the tyre.,Recessed bridge area to increase tyre clearance.,Wide upper arm profile to protect your seals and stanchions.,Six fastenings, to anchor the guard firmly to the fork, so there is no rattling and minimal movement, even in the rockiest conditions.,Multiple fastening slots for increased functionality.,Supplied with re-useable Velcro for easy installation and quick-release.,Gloss underside finish to shed make and make for easy cleaning.,Finished in a stealthy matt black with contrasting gloss features, the MugGuard is a sleek looking piece of kit..MaterialEco! Eco! Eco! (Just in case you haven't got the brief yet) The MugGuard is made from recycled PP, which we've modified to increase performance and durability against the elements, and at the end of its life can be recycled... Reduce, Reuse, Recycle!SizeLength: Short -400mm / Long - 600mm,Width: 85mm,Weight: Short - 75g / Long - 105g.
Sometimes, the Mucky Nutz Face Fender doesn't quite offer enough protection from mud flying from your front wheel. Enter the Mucky Nutz MudGuard which is designed for bigger, closer coverage, while retaining the sleek look and easy fitting of the legendary Face Fender.Designed to offer better coverage with elongated, 3D shape and recessed bridge area for more tyre clearanceWide upper arm profile protects fork seals and stanchions from dirt & mudCompatible with most suspension forks and 26 , 27.5 & 29 wheel sizes and tyres up to 3 Incredibly easy to fit with supplied Velcro rol, just like the original Face FenderShort Mudguard is 400mm long, Long MudGuard is 600mm for additional coverageAs Mucky Nutz' first entry in the 3D fender market, they wanted to ensure they got it right. The MudGuard has been designed as a fully functional and sharp-looking piece of kit, that keep and mud and spray out of your face, even in the worst conditions. The MudGuard is compatible with most suspension forks, including Boost axle-spacing models and is suitable for 26 , 27.5 & 29 wheels and up to 3 tyres. Safe to say it has the ever-changing industry wheel/tyre size standards under control then! The Guard itself features a forward lip to minimise spray, along with a sharp trailing edge to cut cloggy soil away from your tyre. Despire this and the closer fit, the recessed bridge area means you'll still have plenty of tyre clearance. The wide upper arm profile is also designed to keep mud and dirt away from your fork seals and stanchions, keeping them cleaner and prolonging intervals between services. The MudGuard fits in seconds with the supplied Velcro roll, just like the original Face Fender. Another trait it shares with the Face Fender is the multitude of fastening slots, giving you a wide range of adjustment for different forks, as well as as the possibility of using it as a rear mudguard on some full suspension bikes. With the Short version weighing just 75g, the MudGuard is also super light. Offering excellent coverage and a versatile fitting system, the Mucky Nutz MudGuard is a worthy addition to their range for when you need maximum protection from mud & spray in the worst conditions.
Stay Skinz, Clear is specifically designed to discreetly provide bomb-proof protection for your seat and chain stays against impact and wear, commonly picked up on the trails and in transit. FeaturesHigh performance and eco savvy clip, clout, clobber, chip, chafe, crash protection for your precious bike bits,Universal fitting: suitable for alloy and carbon frames,Super clean and easy installation and removal,Exceptional clarity and stylish designs,Proudly designed and manufactured in the UK; the land of muck.MaterialWe spent forever (and a bit longer), sourcing the right materials but we are happy as pigs in (muck) with the end product and hope you will be too. Using materials normally used on Motocross, Karts, ATVs, Snowmobiles and Jet Skis with a strong, clear pressure-sensitive adhesive that is super clean to apply and remove, the end result is a 300 micron composite vinyl (that's metric by the way), that offers outstanding performance and crystal clear graphics while also being pliable enough to conform to the endless contours of each and every bike frame. EcoDid we say the vinyl is Cadmium-free? WTF is that, you may ask. Straight from https://www.greenfacts.org/en/cadmium/ Normally found in PVC materials, Cadmium is toxic to plants, animals and micro-organisms. Being a simple chemical element, Cadmium is persistent – it cannot be broken down into less toxic substances in the environment. Basically, it's not very nice so we got rid of it. If that's not enough, with graphics printed using eco-friendly ink and sandwiched in-between the vinyl layers for added protection, the end product is bundled inside its dedicated recycled cardboard packaging, keeping it safe while it heads to you. Contents,2 x seat stay protectors,2 x chain stay protectors.FitThe patches are compatible with most seat and chain stays.
Sometimes, the Mucky Nutz Face Fender doesn't quite offer enough protection from mud flying from your front wheel. Enter the Mucky Nutz MudGuard which is designed for bigger, closer coverage, while retaining the sleek look and easy fitting of the legendary Face Fender.Designed to offer better coverage with elongated, 3D shape and recessed bridge area for more tyre clearanceWide upper arm profile protects fork seals and stanchions from dirt & mudCompatible with most suspension forks and 26 , 27.5 & 29 wheel sizes and tyres up to 3 Incredibly easy to fit with supplied Velcro rol, just like the original Face FenderShort Mudguard is 400mm long, Long MudGuard is 600mm for additional coverageAs Mucky Nutz' first entry in the 3D fender market, they wanted to ensure they got it right. The MudGuard has been designed as a fully functional and sharp-looking piece of kit, that keep and mud and spray out of your face, even in the worst conditions. The MudGuard is compatible with most suspension forks, including Boost axle-spacing models and is suitable for 26 , 27.5 & 29 wheels and up to 3 tyres. Safe to say it has the ever-changing industry wheel/tyre size standards under control then! The Guard itself features a forward lip to minimise spray, along with a sharp trailing edge to cut cloggy soil away from your tyre. Despire this and the closer fit, the recessed bridge area means you'll still have plenty of tyre clearance. The wide upper arm profile is also designed to keep mud and dirt away from your fork seals and stanchions, keeping them cleaner and prolonging intervals between services. The MudGuard fits in seconds with the supplied Velcro roll, just like the original Face Fender. Another trait it shares with the Face Fender is the multitude of fastening slots, giving you a wide range of adjustment for different forks, as well as as the possibility of using it as a rear mudguard on some full suspension bikes. With the Short version weighing just 75g, the MudGuard is also super light. Offering excellent coverage and a versatile fitting system, the Mucky Nutz MudGuard is a worthy addition to their range for when you need maximum protection from mud & spray in the worst conditions.
The Face Fender XL is the new version of Mucky Nutz' Bender Fender but this version is pretty special as it is designed specifically for use on Fat Bikes. The biggest difference between this version and the standard MTB version is that is has 4 arms and split lines, this is to help the mudguard's extra length curve to give you added protection from mud, sand or snow. The 4 arms also provide the guard with added strength which it needs due to its slightly thicker build.Fits as close as possible to the knobbly bits for optimum 'muck' catching.Can be used on all wheel sizes.Protects your fork crown from getting caked.It's the lightest front Fat Bike mudguard available.Weight: 75g
Meet the brand new, fantastic, feature packed Face Fender!Lightweight, discreet, and very effective, the Face Fender is a simple front mud guard for mountain bikes, made from 100% recycled plastic.The HistoryThe Face Fender is the original ‘flexi-fender’ for Mountain Bikes, and the foundation on which we have built the Mucky Nutz empire!Introduced as the ‘Bender Fender’, way back in 2009 (yikes, we feel old!) our simple yet very effective mud guard was the first of its kind, taking the cycling community by storm.Today, 13 years after the original product was released, and with well over 1 million units sold world-wide, the Face Fender is more popular than ever. It has established itself as a household name, used and endorsed by Pro riders on the Downhill and Enduro circuits, and by weekend warriors alike!The DesignThe Face Fender design has been developed and refined several times over the years, to improve functionality and keep up with ever-changing suspension fork designs. We are very proud to bring you the latest and greatest Face Fender in this evolution.This edition brings a plethora of new features, offering you the highest functionality per gram, all within the most compact package possible. We are sticking with our tried and trusted (100% recycled) 1000 micron thickness material, which we have found to be the best balance between weight, flexibility, and durability.We are proud to be using 100% recycled plastic across the range, with re-useable VELCRO® Brand fasteners.Key Features· Stops muck, gravel, and ‘animal treats’ from being flung into your face, whilst thundering down the trail.· Simple design, which attaches to your suspension fork using the supplied VELCRO® Brand fasteners.· Super lightweight, at just 30g.· Compatible with 26", 27.5" and 29’’ wheel sizes.· Compatible with ‘standard’ and ‘boost’ suspension forks, with a forward-facing arch.· Will work with tyres up to 3’’ wide.· Improved seal shielding protects your precious (and expensive!) fork stanchions, seals and bridge from getting caked in mud and grit, reducing damage from wear and abrasion over time.· The new fold down front lip catches spray and splatter, keeping your face and eyes clear.· A secure fit, with no movement or rattling. You’ll hardly know it’s there.· Easy to clean, as it's flexible and opens flat. Spray it, wipe it, and you're done!· Comes with genuine, high-quality and super tough VELCRO® Brand fasteners. Velcro is soft on your paintwork, and makes fitting and removal a breeze for bike cleaning and maintenance.· Made in the UK, from 100% recycled waste plastic.Dimensions· Length: 241mm· Width: 272mm· Mass: 30gInstallation1. Break off the hanger tab, and remove the Velcro roll.2. Take the Velcro roll, and wrap it around a fork lower so it overlaps itself by an inch or so.3. Cut off that length, and repeat the process, so that you have two equal lengths.4. Do the same for the fork bridge. You will end up with two long lengths of Velcro for the lowers, and two short lengths for the bridge.5. Take the fender, and thread the long lengths of Velcro through the 'arm' holes (fluffy side towards the fork), and the short lengths through the two bridge holes.6. Position the fender to the underside of the fork bridge, and secure the top two Velcro straps around the bridge, pulling the fender up as high as possible.7. Now tighten the two fasteners around the fork lowers.8. Fold down the front lip, so that it clears the tyre by roughly 5 - 10mm.9. Square the fender up, and check tyre clearance.10. Go for a spin, and find some mud!SustainabilityIt's no secret that plastic is used in most of our products, and this is simply because it's the best material for the job. We manufacture everything using 100% recycled waste plastic.As a responsible manufacturer we are committed to sustainability; to produce and sell our products with minimal consumption, minimal packaging, and minimal waste.Each product is designed to serve its purpose over many years and is by no means a ‘single-use plastic’. When a Mucky Nutz product does eventually reach the end of its functional life, it can be fully recycled once more.
The Mucky Full Face Fender is the the follow up to the original Face Fender fork mounted mudguard. The Full Face Fender is the same thickness as the Standard Face Fender but features an elongated, contoured £D profile that provides ultimate protection at a modest 45g. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Full Face Fender. Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zip ties for a more permanent solution.
The Fat Face Fender is the new version of Mucky Nutz' Bender Fender but this version is pretty special as it is designed specifically for use on Fat Bikes.Fits as close as possible to the knobbly bits for optimum 'muck' catching.Can be used on all wheel sizes.Protects your fork crown from getting caked.It's the lightest front Fat Bike mudguard available.Weight: 75gThe biggest difference between this version and the standard MTB version is that is has 4 arms and split lines, this is to help the mudguard's extra length curve to give you added protection from mud, sand or snow. The 4 arms also provide the guard with added strength which it needs due to its slightly thicker build.
A neat and discreet, saddle mounted rear mud guard.The butt fender is a simple and lightweight solution, designed to help keep your back side clean and dry!FeaturesDeveloped for MTB, but equally suited to commuters.,Stops your butt and the top of your seat post from getting clogged up.,Discreet and very effective.,Weighs just 30g.,No fasteners required. Our simple, clever design is quick to fit and secure once in place.,Easy to clean as it's flexible and opens flat. Simply wipe and you're done (the Butt Fender, that is).,Made in the UK from recyclable plastic..CompatibilityDesigned to fit standard double-steel rail saddles that don't have any 'daft bits' in the way. See images for clarification.,Sustainability,It's no secret that plastic is used in most of our products and this is simply because it's the best material for the job.,As a responsible manufacturer we are committed to sustainability; to produce and sell our products with minimal waste, minimal packaging and we recycle everything we can along the way. Each product is designed to serve its purpose over many years and is by no means a single-use plastic. When a Mucky Nutz product does eventually reach the end of its functional life, it can be fully recycled and we encourage customers to do so..DimensionsLength: 330mm,Width: 134mm,Weight: 30g.
The Mucky Nutz Face Fender XL is the original and Patent Pending fork mounted mudguard. The XL Face Fender is the same thickness as the Standard Fast Fender but provides ultimate protection at a modest 32g. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zip ties for a more permanent solution.
The Mucky Nutz Face Fender XL is the original and Patent Pending fork mounted mudguard. The XL Face Fender is the same thickness as the Standard Fast Fender but provides ultimate protection at a modest 32g. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zip ties for a more permanent solution.
The Mucky Nutz Face Fender XL is the original and Patent Pending fork mounted mudguard. The XL Face Fender is the same thickness as the Standard Fast Fender but provides ultimate protection at a modest 32g. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zip ties for a more permanent solution.
The Mucky Nutz Face Fender XL is the original and Patent Pending fork mounted mudguard. The XL Face Fender is the same thickness as the Standard Fast Fender but provides ultimate protection at a modest 32g. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zip ties for a more permanent solution.
The Mucky Nutz Face Fender XL is the original and Patent Pending fork mounted mudguard. The XL Face Fender is the same thickness as the Standard Fast Fender but provides ultimate protection at a modest 32g. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zip ties for a more permanent solution.
The Mucky Nutz Face Fender XL is the original and Patent Pending fork mounted mudguard. The XL Face Fender is the same thickness as the Standard Fast Fender but provides ultimate protection at a modest 32g. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zip ties for a more permanent solution.
The Mucky Nutz Face Fender XL is the original and Patent Pending fork mounted mudguard. The XL Face Fender is the same thickness as the Standard Fast Fender but provides ultimate protection at a modest 32g. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zip ties for a more permanent solution.
The Mucky Nutz Face Fender is the original and Patent Pending fork mounted mudguard. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Weighing from just 11g without fasteners it's the lightest and most versatile mudguard available.Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zipties for a more permanent solution.
The Mucky Nutz Face Fender Reverse is the the reverse fork brace compatible version of the original Face Fender! Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Weighing from just 11g without fasteners it's the lightest and most versatile mudguard available.Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zip ties for a more permanent solution.