MRP SXg Alloy MTB Chain GuideThe SXg is a low profile chainguide, which is unlikely to come into contact with objects that you ride over. Should this happen to be the case, the SXg has a lower bash guard that will protect your chainring if contact with trail objects were to occur.Features:Suited to Downhill, Enduro and Trail ridingPassive Retention ensures the guide does not make contact with the chain unless neededFull-size, nylon HD upper guide with co-moldingAll install and adjustment operations are possible with just a single 4mm HEX wrenchWhippersnapper lower guideISCG-05 onlyCompatible with a 49mm chainline and wider (is also Boost 148 compatible)Integrated SX skid provides safeguard to the chainring and glides over rocks and obstaclesBuy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
As the AMg guide has no chain retention device that is rarely needed with modern narrow/wide chainrings and clutch derailleurs, this guide is drag free when pedalling and still provides trail obstacle protection, as the skid plate is still present.
MRP AMg V2 Carbon MTB Chain GuideThe AMg (v2) chain guide is perfect for All Mountain riding. It has become a popular choice for many riders on all types of All Mountain bikes, it will excel equally when mounted on a hard tail or a 5-6" travel full suspension bike.As the AMg guide has no chain retention device that is rarely needed with modern narrow/wide chainrings and clutch derailleurs, this guide is drag free when pedalling and still provides trail obstacle protection, as the skid plate is still present.Features:Suited to Enduro and Trail ridingSingle Ring 1x /9/10 and 11-speed drivetrainsNew co-moulded "TR" upper guide with softer durometer interior for silent guidanceAdds chainring protection to all chainrings within the size rangeIt also adds chain tension to stop the chain from skipping when shiftingCompatible with a chainline of 49mm and widerBuy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ready for the demands of downhill mountain bike racing and gravity riding, this chain device features a carbon backplate that offers fantastic stiffness, durability and an overall low weight on your ride. MRP has also kitted out this model with a co-moulded HD2 upper guide that uses a softer durometer thermoplastic polyurethane (TPU) interior for silent guidance as you fire down the trail. Another highlight is its upper guide/backplate interface that's tracked and grooved, which offers increased stiffness and eases installation. Carbon Chain Guide with Integrated Skid MRP has specifically designed this model for the rigours of modern downhill racing and gravity riding. As a result, it comes equipped with an integrated skid that protects your chainrings against damage, while it glides over rocks and obstacles. This makes it capable of handling the demands of racing across unpredictable terrain conditions with rock gardens, tree roots and debris. Also included in this model is a standard pulley and G-slide slider block that assists with quiet, reliable operation even in muddy conditions. With a refreshed design, the MRP G5 SLR Carbon Chain Device is a great choice of upgrade for riders who want championship-winning performance from the brand's renowned "G" guide. Technologies: - Tracked and grooved upper guide/backplate interface increases stiffness and eases installation. - Co-moulded "HD2" upper guide with softer durometer interior for silent guidance. - Integrated skid protects chainrings and glides over rocks and obstacles. - Includes standard pulley and G-slide slider block for quiet, dependable operation in muddy and dank conditions. Manufacturer's Part Number: CHMRG5C5K Black 36/40T CHMRG5D5K Black 32/36T
MRP G5 SLR Carbon MTB Chain GuideFeaturing a carbon backplate, this chain guide offers fantastic stiffness, durability and an overall low weight that's tailored for the demands of downhill mountain bike racing and gravity riding. MRP has also kitted out this model with a co-moulded HD2 upper guide that uses a softer durometer thermoplastic polyurethane (TPU) interior for silent guidance as you fire down the trail. Another highlight is its upper guide/backplate interface that's tracked and grooved, which offers increased stiffness and eases installation.Carbon Chain Guide with Integrated SkidMRP has specifically designed this model for the rigours of modern downhill racing and gravity riding. As a result, it comes equipped with an integrated skid that protects your chainrings against damage, while it glides over rocks and obstacles. This makes it capable of handling the demands of racing across unpredictable terrain conditions with rock gardens, tree roots and debris. Also included in this model is a standard pulley and G-slide slider block that assists with quiet, reliable operation even in muddy conditions. With a refreshed design, the MRP G5 SLR Carbon Chain Device is a great choice of upgrade for riders who want championship-winning performance from the brand's renowned "G" guide.Features: Backplate Material: Carbon Use: Downhill (DH), Gravity Hardware: Swingset hardware Chainline Compatibility: Compatible with chain lines 50mm and wider Mount Type: ISCG-05, mounting hardware included and install possible with just a single 4mm HEX wrench Oval Compatible: Yes Weight: 153g (32-36T option)Technologies: Tracked and grooved upper guide/backplate interface increases stiffness and eases installation. Co-moulded "HD2" upper guide with softer durometer interior for silent guidance. Integrated skid protects chainrings and glides over rocks and obstacles. Includes standard pulley and G-slide slider block for quiet, dependable operation in muddy and dank conditions.Manufacturer's Part Number: CHMRG5C5K Black 36/40T CHMRG5D5K Black 32/36TBuy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Should this happen to be the case, the SXg has a lower bash guard that will protect your chainring if contact with trail objects were to occur.
MRP G5 SLR Carbon MTB Chain GuideFeaturing a carbon backplate, this chain guide offers fantastic stiffness, durability and an overall low weight that's tailored for the demands of downhill mountain bike racing and gravity riding. MRP has also kitted out this model with a co-moulded HD2 upper guide that uses a softer durometer thermoplastic polyurethane (TPU) interior for silent guidance as you fire down the trail. Another highlight is its upper guide/backplate interface that's tracked and grooved, which offers increased stiffness and eases installation.Carbon Chain Guide with Integrated SkidMRP has specifically designed this model for the rigours of modern downhill racing and gravity riding. As a result, it comes equipped with an integrated skid that protects your chainrings against damage, while it glides over rocks and obstacles. This makes it capable of handling the demands of racing across unpredictable terrain conditions with rock gardens, tree roots and debris. Also included in this model is a standard pulley and G-slide slider block that assists with quiet, reliable operation even in muddy conditions. With a refreshed design, the MRP G5 SLR Carbon Chain Device is a great choice of upgrade for riders who want championship-winning performance from the brand's renowned "G" guide.Features: Backplate Material: Carbon Use: Downhill (DH), Gravity Hardware: Swingset hardware Chainline Compatibility: Compatible with chain lines 50mm and wider Mount Type: ISCG-05, mounting hardware included and install possible with just a single 4mm HEX wrench Oval Compatible: Yes Weight: 153g (32-36T option)Technologies: Tracked and grooved upper guide/backplate interface increases stiffness and eases installation. Co-moulded "HD2" upper guide with softer durometer interior for silent guidance. Integrated skid protects chainrings and glides over rocks and obstacles. Includes standard pulley and G-slide slider block for quiet, dependable operation in muddy and dank conditions.Manufacturer's Part Number: CHMRG5C5K Black 36/40T CHMRG5D5K Black 32/36TBuy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP SXg Carbon MTB Chain GuideThe SXg is a low profile chainguide, which is unlikely to come into contact with objects that you ride over. Should this happen to be the case, the SXg has a lower bash guard that will protect your chainring if contact with trail objects were to occur.Features:Suited to Downhill, Enduro and Trail ridingPassive Retention ensures the guide does not make contact with the chain unless neededFull-size, nylon HD upper guide with co-moldingAll install and adjustment operations are possible with just a single 4mm HEX wrenchWhippersnapper lower guideISCG-05 onlyCompatible with a 50mm chainline and wider (is also Boost 148 compatible)Integrated SX skid provides safeguard to the chainring and glides over rocks and obstaclesBuy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
With the SXg, MRP delivers a guide without compromise and with no equal. No longer does the desire for protection and both upper and lower retention have to come at the expense of weight, efficiency, or the addition of moving parts - have your cake and eat it too. With the SXg covering all those bases, it's the first guide in history that's equally at home on anything from aggressive, short-travel bikes to Armageddon-ready Rampage rigs, and everywhere in-between. It's a guide that refuses to be pigeon-holed, blurring the lines between typical industry definitions - a little country and a little rock, as they say. But, in this case, it's a whole lotta rock.High-security chain retention and bulletproof chainring defense in an innovative, lightweight package with zero efficiency loss make the SXg ideal for a wide range of uses. Whippersnapper technology gives lower retention without moving parts or friction. The most advanced chainguide on the market, the SXg is the go-to of the top Rampage stuntmen, World Cup downhill pilots, and superhuman enduro tacticians.Key Features:Whippersnapper lower guide.,Full-size, nylon HD upper guide with co-molding.,Aluminum and Carbon backplate options give a stiff foundation at two price points.,Integrated SX skid provides safeguard to the chainring and glides over rocks and obstacles.,Nylon and TPU co-molding in the Whippersnapper provides durable protection from external blows and mutes internal contact with the chain.,Swingset hardware.,All installation and adjustment operations are possible with just a single 4mm HEX wrench.,Available in 30-34t and 34-38t sizing.,Alloy guides compatible with chainlines 49mm and wider, carbon 50mm and wider. Boost 148 compatible.,ISCG-05 only.,Weight 106g (30-34T carbon) .
MRP Ribbon Coil 29" Forks - BoostAdding a long-travelling, low-friction and long-lasting fork to your 29er, this brilliant impact-eater from MRP combines the best of both coil and air springs. Boost sized for use with larger, more venturesome frames and tyres, it provides the superb stroke control and tuneability of a top-end air-spring but with the durability and lower friction generated by a coil type.Top-Performing MTB ForkDesigned with an outcast arch design, the Ribbon Coil offers a clean and protective, lightweight performance and features an innovative “Ramp Control” system and a bladder free damper for a more honed experience when bumping downhill and racing through various terrains. Features:Stanchion Size: 35mmTravel: 160mmSpring System: Coil, soft, medium and firm springs included, extra-soft and extra-firm available separatelyExternal Adjustments: Preload, 8-position low-speed compression, 20-position Ramp Control and rebound Internal Adjustments: 140-160mm Brake Mount: 180mm Post mount (Disc only)Axle: Boost spacing - 15x110mm, QR15 standard, "tooled" bolt-on axle optionalWeight: 2.11kgBuy MRP Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Ribbon Air ForkFeaturing 35mm stanchions, combined with MRP's renowned technologies, this mountain bike (MTB) fork is ready for the rigours of enduro racing and all mountain riding terrain conditions. This model is equipped with Boost axle spacing, which gives it additional stiffness and strength as you tackle unpredictable, mixed terrains, while also ensuring smooth, effective and consistent handling as you weave between the trails. MRP Ribbon forks have received updates including the ChocoLUXE internals and Norglide Bushings, providing less stiction and better-than-ever performance.Enduro Forks with Adjustable Air Spring SystemMRP's goal in designing the Ribbon was seemingly impossible: building on the success of the heralded Stage, create a fork with higher performance, more adjustability, more features, all at a significantly lower weight. Those incredible demands meant that the brand had to reimagine elements like casting design, reconfigure damper architecture, and completely retarget performance goals. The result is not just the best fork they've ever produced, they've classed it as the new industry benchmark.With other features like the highly tuneable FulFill air-spring, low-pressure IFP damper, PSST pressure relief valves, and Outcast arch design and the acclaimed Ramp Control technology, this is the enduro fork to have. Features: Stanchions: 35mm Use: All mountain, Enduro Axle: 15x110mm Boost QR axle standard; Bolt-on optional (available separately) Air Spring System: FulFill independent positive & negative chamber system External Adjustments: Positive/negative air-spring pressure, 8-position low-speed compression, 16-position Ramp Control, and rebound Internal Adjustments: Travel (in 5mm increments) Brake Mount: 180mm, post mount Fork Travel/Offset: Multiple options available to select Axle To Crown Length: 27.5" Option with 150mm travel: 542mm; 27.5" Option with 160mm travel: 552mm; 27.5+/29" Option with 150mm travel: 562mm; 27.5+/29" Option with 160mm travel: 572mm Weight: 27.5" Option: 1.88kg; 27.5+/29" Option: 1.95kgTechnologies: ChocoLUXE Internals: ChocoLUXE is a proprietary material utilised in the damper plug, damper seal, damper IFP, and damper support. It's highly dimensionally stable, meaning that parts made from it are more consistent overall and less susceptible to change with exposure to temperature swings or humidity. It is also extremely low friction. Norglide Bushings: Norglide Bushings from Saint Gobain are metal-reinforced, self-lubricating bushings with a layer of a low friction PTFE compound. They're exceptionally smooth and durable. Reduced Friction: In addition to part updates, MRP also continued to refine its processes. In whole, these part and process changes have resulted in a 37% reduction in friction compared to first-generation Ribbon forks. FullFill air-spring system with independently adjustable positive and negative air-chambers for greater tunability. New EssenTTial twin-tube, bladder-free damper utilizing a low-pressure IFP. Outcast arch design with forward-facing weight reliefs to mitigate mud build up. PSST pressure-relief valves that quickly and easily bleed off excess pressure in the lowers caused by elevation and temperature changes. "Boost" spacing and 35mm stanchions.Manufacturer's Part Numbers: FKMRR7151 Black 27.5" 150mm 44mm FKMRR7152 Black 27.5" 160mm 44mm FKMRR7164 Black 29"/27.5"+ 150mm 46mm FKMRR7165 Black 29"/27.5"+ 160mm 46mm Buy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Ribbon Air ForkFeaturing 35mm stanchions, combined with MRP's renowned technologies, this mountain bike (MTB) fork is ready for the rigours of enduro racing and all mountain riding terrain conditions. This model is equipped with Boost axle spacing, which gives it additional stiffness and strength as you tackle unpredictable, mixed terrains, while also ensuring smooth, effective and consistent handling as you weave between the trails. MRP Ribbon forks have received updates including the ChocoLUXE internals and Norglide Bushings, providing less stiction and better-than-ever performance.Enduro Forks with Adjustable Air Spring SystemMRP's goal in designing the Ribbon was seemingly impossible: building on the success of the heralded Stage, create a fork with higher performance, more adjustability, more features, all at a significantly lower weight. Those incredible demands meant that the brand had to reimagine elements like casting design, reconfigure damper architecture, and completely retarget performance goals. The result is not just the best fork they've ever produced, they've classed it as the new industry benchmark.With other features like the highly tuneable FulFill air-spring, low-pressure IFP damper, PSST pressure relief valves, and Outcast arch design and the acclaimed Ramp Control technology, this is the enduro fork to have. Features: Stanchions: 35mm Use: All mountain, Enduro Axle: 15x110mm Boost QR axle standard; Bolt-on optional (available separately) Air Spring System: FulFill independent positive & negative chamber system External Adjustments: Positive/negative air-spring pressure, 8-position low-speed compression, 16-position Ramp Control, and rebound Internal Adjustments: Travel (in 5mm increments) Brake Mount: 180mm, post mount Fork Travel/Offset: Multiple options available to select Axle To Crown Length: 27.5" Option with 150mm travel: 542mm; 27.5" Option with 160mm travel: 552mm; 27.5+/29" Option with 150mm travel: 562mm; 27.5+/29" Option with 160mm travel: 572mm Weight: 27.5" Option: 1.88kg; 27.5+/29" Option: 1.95kgTechnologies: ChocoLUXE Internals: ChocoLUXE is a proprietary material utilised in the damper plug, damper seal, damper IFP, and damper support. It's highly dimensionally stable, meaning that parts made from it are more consistent overall and less susceptible to change with exposure to temperature swings or humidity. It is also extremely low friction. Norglide Bushings: Norglide Bushings from Saint Gobain are metal-reinforced, self-lubricating bushings with a layer of a low friction PTFE compound. They're exceptionally smooth and durable. Reduced Friction: In addition to part updates, MRP also continued to refine its processes. In whole, these part and process changes have resulted in a 37% reduction in friction compared to first-generation Ribbon forks. FullFill air-spring system with independently adjustable positive and negative air-chambers for greater tunability. New EssenTTial twin-tube, bladder-free damper utilizing a low-pressure IFP. Outcast arch design with forward-facing weight reliefs to mitigate mud build up. PSST pressure-relief valves that quickly and easily bleed off excess pressure in the lowers caused by elevation and temperature changes. "Boost" spacing and 35mm stanchions.Manufacturer's Part Numbers: FKMRR7151 Black 27.5" 150mm 44mm FKMRR7152 Black 27.5" 160mm 44mm FKMRR7164 Black 29"/27.5"+ 150mm 46mm FKMRR7165 Black 29"/27.5"+ 160mm 46mm Buy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Ribbon Coil Mountain Bike ForkComing equipped with 35mm stanchions along with MRP's finest technologies, this trail-ready mountain bike (MTB) fork gives all mountain and enduro racers exceptional front end suspension performance on the most rigorous of terrain conditions. Coming kitted out with Boost axle spacing, this model provides a stronger and stiffer construction, as well as more effective and precise handling as you tackle rock gardens, tree roots and debris. MRP Ribbon coil forks have also received updates including the ChocoLUXE internals and Norglide Bushings, which deliver less stiction and better-than-ever performance.Enduro MTB Fork with Coil SpringThe Ribbon Coil gives you the spring tunability and stroke control previously found only with air, while giving you the supple linear spring curve, lower friction, longer service life and consistent feel that you get with a coil spring. Coil aficionados have dreamt of a fork that combines these advantages with the latest in chassis and damper technology. MRP has delivered with the Ribbon Coil.Also including tried and tested features like the PSST pressure relief valves, bladder-free EssenTTial damper utilising a low-pressure IFP, Outcast arch design and the acclaimed Ramp Control technology, this is the hard-hitting enduro fork to have.Features: Stanchions: 35mm Use: All Mountain, Enduro Axle: 15x110mm Boost QR axle standard, Bolt-on optional (available separately) Steerer Diameter: 1 1/8-1.5" tapered Spring System: Coil Soft, medium & firm springs included External Adjustments: Preload, 8-position low-speed compression, 20-position Ramp Control, and rebound Brake Mount: 180mm, post mount Fork Travel/Offset: Multiple options available to select Axle to Crown Length: 27.5" Option with 150mm travel: 542mm; 27.5" Option with 160mm travel: 552mm; 27.5+/29" Option with 150mm travel: 562mm; 27.5+/29" Option with 160mm travel: 572mm Weight: 27.5" Option: 2.08kg; 27.5+/29" Option: 2.11kgTechnologies: ChocoLUXE Internals: ChocoLUXE is a proprietary material utilised in the damper plug, damper seal, damper IFP, and damper support. It's highly dimensionally stable, meaning that parts made from it are more consistent overall and less susceptible to change with exposure to temperature swings or humidity. It is also extremely low friction. Norglide Bushings: Norglide Bushings from Saint Gobain are metal-reinforced, self-lubricating bushings with a layer of a low friction PTFE compound. They're exceptionally smooth and durable. Reduced Friction: In addition to part updates, MRP also continued to refine its processes. In whole, these part and process changes have resulted in a 37% reduction in friction compared to first-generation Ribbon forks. Travel-adjustable coil spring system with preload adjustment and Ramp Control technology. New EssenTTial twin-tube, bladder-free damper utilising a low-pressure IFP. Outcast arch design with forward-facing weight reliefs to mitigate mud build-up. PSST pressure-relief valves that quickly and easily bleed off excess pressure in the lowers caused by elevation and temperature changes. "Boost" spacing and 35mm stanchions.Manufacturer's Part Numbers: FKMRR7209 Black 29"/27.5"+ 160mm 46mm FKMRR7208 Black 29"/27.5"+ 150mm 46mm FKMRR7213 Black 27.5" 150mm 39mm FKMRR7214 Black 27.5" 160mm 39mmBuy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ready for the rigours of enduro racing and all mountain riding terrain conditions, this versatile mountain bike (MTB) fork is kitted out with 35mm stanchions, combined with MRP's renowned technologies for fantastic front-end suspension performance wherever your next ride takes you. This model is equipped with Boost axle spacing, which gives it additional stiffness and strength as you tackle unpredictable, mixed terrains, while also ensuring smooth, effective and consistent handling as you weave between the trails. MRP Ribbon forks have received updates including the ChocoLUXE internals and Norglide Bushings, providing less stiction and better-than-ever performance. Enduro Forks with Adjustable Air Spring System MRP's goal in designing the Ribbon was seemingly impossible: building on the success of the heralded Stage, create a fork with higher performance, more adjustability, more features, all at a significantly lower weight. Those incredible demands meant that the brand had to reimagine elements like casting design, reconfigure damper architecture, and completely retarget performance goals. The result is not just the best fork they've ever produced, they've classed it as the new industry benchmark. With other features like the highly tuneable FulFill air-spring, low-pressure IFP damper, PSST pressure relief valves, and Outcast arch design and the acclaimed Ramp Control™ technology, this is the enduro fork to have. Technologies: ChocoLUXE Internals: - ChocoLUXE is a proprietary material utilised in the air-spring sealhead, damper plug, damper seal, damper IFP, and damper support. It’s highly dimensionally stable, meaning that parts made from it are more consistent overall and less susceptible to changing with exposure to temperature swings or humidity. It is also extremely low friction. Norglide Bushings: - Norglide Bushings from Saint Gobain are metal-reinforced, self-lubricating bushings with a layer of a low friction PTFE compound. They’re exceptionally smooth and durable. Reduced Friction: In addition to part updates, MRP also continued to refine its processes. In whole, these part and process changes have resulted in a 37% reduction in friction compared to first-generation Ribbon forks. FullFill™ air-spring system with independently adjustable positive and negative air-chambers for greater tunability. New EssenTTial™ twin-tube, bladder-free damper utilizing a low-pressure IFP. Outcast™ arch design with forward-facing weight reliefs to mitigate mud build up. PSST™ pressure-relief valves that quickly and easily bleed off excess pressure in the lowers caused by elevation and temperature changes. "Boost" spacing and 35mm stanchions. Manufacturer's Part Numbers: FKMRR7151 Black 27.5" 150mm 44mm FKMRR7152 Black 27.5" 160mm 44mm FKMRR7164 Black 29"/27.5"+ 150mm 46mm FKMRR7165 Black 29"/27.5"+ 160mm 46mm
This race-ready mountain bike (MTB) fork is equipped with 35mm stanchions along with MRP's finest technologies to give all mountain and enduro racers exceptional front end suspension performance on the most rigorous of terrain conditions. Coming kitted out with Boost axle spacing, this model provides a stronger and stiffer construction, as well as more effective and precise handling as you tackle rock gardens, tree roots and debris. MRP Ribbon coil forks have also received updates including the ChocoLUXE internals and Norglide Bushings, which deliver less stiction and better-than-ever performance. Enduro MTB Fork with Coil Spring The Ribbon Coil gives you the spring tunability and stroke control previously found only with air, while giving you the supple linear spring curve, lower friction, longer service life and consistent feel that you get with a coil spring. Coil aficionados have dreamt of a fork that combines these advantages with the latest in chassis and damper technology. MRP has delivered with the Ribbon Coil. Also including tried and tested features like the PSST pressure relief valves, bladder-free EssenTTial damper utilising a low-pressure IFP, Outcast arch design and the acclaimed Ramp Control technology, this is the hard-hitting enduro fork to have. Technologies: ChocoLUXE Internals: - ChocoLUXE is a proprietary material utilised in the damper plug, damper seal, damper IFP, and damper support. It’s highly dimensionally stable, meaning that parts made from it are more consistent overall and less susceptible to change with exposure to temperature swings or humidity. It is also extremely low friction. Norglide Bushings: - Norglide Bushings from Saint Gobain are metal-reinforced, self-lubricating bushings with a layer of a low friction PTFE compound. They’re exceptionally smooth and durable. Reduced Friction: In addition to part updates, MRP also continued to refine its processes. In whole, these part and process changes have resulted in a 37% reduction in friction compared to first-generation Ribbon forks. Travel-adjustable coil spring system with preload adjustment and Ramp Control™ technology. New EssenTTial™ twin-tube, bladder-free damper utilising a low-pressure IFP. Outcast™ arch design with forward-facing weight reliefs to mitigate mud build-up. PSST™ pressure-relief valves that quickly and easily bleed off excess pressure in the lowers caused by elevation and temperature changes. "Boost" spacing and 35mm stanchions. Manufacturer's Part Numbers: FKMRR7209 Black 29"/27.5"+ 160mm 46mm FKMRR7208 Black 29"/27.5"+ 150mm 46mm FKMRR7213 Black 27.5" 150mm 39mm FKMRR7214 Black 27.5" 160mm 39mm
MRP Ribbon Coil Mountain Bike ForkComing equipped with 35mm stanchions along with MRP's finest technologies, this trail-ready mountain bike (MTB) fork gives all mountain and enduro racers exceptional front end suspension performance on the most rigorous of terrain conditions. Coming kitted out with Boost axle spacing, this model provides a stronger and stiffer construction, as well as more effective and precise handling as you tackle rock gardens, tree roots and debris. MRP Ribbon coil forks have also received updates including the ChocoLUXE internals and Norglide Bushings, which deliver less stiction and better-than-ever performance.Enduro MTB Fork with Coil SpringThe Ribbon Coil gives you the spring tunability and stroke control previously found only with air, while giving you the supple linear spring curve, lower friction, longer service life and consistent feel that you get with a coil spring. Coil aficionados have dreamt of a fork that combines these advantages with the latest in chassis and damper technology. MRP has delivered with the Ribbon Coil.Also including tried and tested features like the PSST pressure relief valves, bladder-free EssenTTial damper utilising a low-pressure IFP, Outcast arch design and the acclaimed Ramp Control technology, this is the hard-hitting enduro fork to have.Features: Stanchions: 35mm Use: All Mountain, Enduro Axle: 15x110mm Boost QR axle standard, Bolt-on optional (available separately) Steerer Diameter: 1 1/8-1.5" tapered Spring System: Coil Soft, medium & firm springs included External Adjustments: Preload, 8-position low-speed compression, 20-position Ramp Control, and rebound Brake Mount: 180mm, post mount Fork Travel/Offset: Multiple options available to select Axle to Crown Length: 27.5" Option with 150mm travel: 542mm; 27.5" Option with 160mm travel: 552mm; 27.5+/29" Option with 150mm travel: 562mm; 27.5+/29" Option with 160mm travel: 572mm Weight: 27.5" Option: 2.08kg; 27.5+/29" Option: 2.11kgTechnologies: ChocoLUXE Internals: ChocoLUXE is a proprietary material utilised in the damper plug, damper seal, damper IFP, and damper support. It's highly dimensionally stable, meaning that parts made from it are more consistent overall and less susceptible to change with exposure to temperature swings or humidity. It is also extremely low friction. Norglide Bushings: Norglide Bushings from Saint Gobain are metal-reinforced, self-lubricating bushings with a layer of a low friction PTFE compound. They're exceptionally smooth and durable. Reduced Friction: In addition to part updates, MRP also continued to refine its processes. In whole, these part and process changes have resulted in a 37% reduction in friction compared to first-generation Ribbon forks. Travel-adjustable coil spring system with preload adjustment and Ramp Control technology. New EssenTTial twin-tube, bladder-free damper utilising a low-pressure IFP. Outcast arch design with forward-facing weight reliefs to mitigate mud build-up. PSST pressure-relief valves that quickly and easily bleed off excess pressure in the lowers caused by elevation and temperature changes. "Boost" spacing and 35mm stanchions.Manufacturer's Part Numbers: FKMRR7209 Black 29"/27.5"+ 160mm 46mm FKMRR7208 Black 29"/27.5"+ 150mm 46mm FKMRR7213 Black 27.5" 150mm 39mm FKMRR7214 Black 27.5" 160mm 39mmBuy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Ribbon Air ForkFeaturing 35mm stanchions, combined with MRP's renowned technologies, this mountain bike (MTB) fork is ready for the rigours of enduro racing and all mountain riding terrain conditions. This model is equipped with Boost axle spacing, which gives it additional stiffness and strength as you tackle unpredictable, mixed terrains, while also ensuring smooth, effective and consistent handling as you weave between the trails. MRP Ribbon forks have received updates including the ChocoLUXE internals and Norglide Bushings, providing less stiction and better-than-ever performance.Enduro Forks with Adjustable Air Spring SystemMRP's goal in designing the Ribbon was seemingly impossible: building on the success of the heralded Stage, create a fork with higher performance, more adjustability, more features, all at a significantly lower weight. Those incredible demands meant that the brand had to reimagine elements like casting design, reconfigure damper architecture, and completely retarget performance goals. The result is not just the best fork they've ever produced, they've classed it as the new industry benchmark.With other features like the highly tuneable FulFill air-spring, low-pressure IFP damper, PSST pressure relief valves, and Outcast arch design and the acclaimed Ramp Control technology, this is the enduro fork to have. Features: Stanchions: 35mm Use: All mountain, Enduro Axle: 15x110mm Boost QR axle standard; Bolt-on optional (available separately) Air Spring System: FulFill independent positive & negative chamber system External Adjustments: Positive/negative air-spring pressure, 8-position low-speed compression, 16-position Ramp Control, and rebound Internal Adjustments: Travel (in 5mm increments) Brake Mount: 180mm, post mount Fork Travel/Offset: Multiple options available to select Axle To Crown Length: 27.5" Option with 150mm travel: 542mm; 27.5" Option with 160mm travel: 552mm; 27.5+/29" Option with 150mm travel: 562mm; 27.5+/29" Option with 160mm travel: 572mm Weight: 27.5" Option: 1.88kg; 27.5+/29" Option: 1.95kgTechnologies: ChocoLUXE Internals: ChocoLUXE is a proprietary material utilised in the damper plug, damper seal, damper IFP, and damper support. It's highly dimensionally stable, meaning that parts made from it are more consistent overall and less susceptible to change with exposure to temperature swings or humidity. It is also extremely low friction. Norglide Bushings: Norglide Bushings from Saint Gobain are metal-reinforced, self-lubricating bushings with a layer of a low friction PTFE compound. They're exceptionally smooth and durable. Reduced Friction: In addition to part updates, MRP also continued to refine its processes. In whole, these part and process changes have resulted in a 37% reduction in friction compared to first-generation Ribbon forks. FullFill air-spring system with independently adjustable positive and negative air-chambers for greater tunability. New EssenTTial twin-tube, bladder-free damper utilizing a low-pressure IFP. Outcast arch design with forward-facing weight reliefs to mitigate mud build up. PSST pressure-relief valves that quickly and easily bleed off excess pressure in the lowers caused by elevation and temperature changes. "Boost" spacing and 35mm stanchions.Manufacturer's Part Numbers: FKMRR7151 Black 27.5" 150mm 44mm FKMRR7152 Black 27.5" 160mm 44mm FKMRR7164 Black 29"/27.5"+ 150mm 46mm FKMRR7165 Black 29"/27.5"+ 160mm 46mm Buy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Ribbon Coil Mountain Bike ForkComing equipped with 35mm stanchions along with MRP's finest technologies, this trail-ready mountain bike (MTB) fork gives all mountain and enduro racers exceptional front end suspension performance on the most rigorous of terrain conditions. Coming kitted out with Boost axle spacing, this model provides a stronger and stiffer construction, as well as more effective and precise handling as you tackle rock gardens, tree roots and debris. MRP Ribbon coil forks have also received updates including the ChocoLUXE internals and Norglide Bushings, which deliver less stiction and better-than-ever performance.Enduro MTB Fork with Coil SpringThe Ribbon Coil gives you the spring tunability and stroke control previously found only with air, while giving you the supple linear spring curve, lower friction, longer service life and consistent feel that you get with a coil spring. Coil aficionados have dreamt of a fork that combines these advantages with the latest in chassis and damper technology. MRP has delivered with the Ribbon Coil.Also including tried and tested features like the PSST pressure relief valves, bladder-free EssenTTial damper utilising a low-pressure IFP, Outcast arch design and the acclaimed Ramp Control technology, this is the hard-hitting enduro fork to have.Features: Stanchions: 35mm Use: All Mountain, Enduro Axle: 15x110mm Boost QR axle standard, Bolt-on optional (available separately) Steerer Diameter: 1 1/8-1.5" tapered Spring System: Coil Soft, medium & firm springs included External Adjustments: Preload, 8-position low-speed compression, 20-position Ramp Control, and rebound Brake Mount: 180mm, post mount Fork Travel/Offset: Multiple options available to select Axle to Crown Length: 27.5" Option with 150mm travel: 542mm; 27.5" Option with 160mm travel: 552mm; 27.5+/29" Option with 150mm travel: 562mm; 27.5+/29" Option with 160mm travel: 572mm Weight: 27.5" Option: 2.08kg; 27.5+/29" Option: 2.11kgTechnologies: ChocoLUXE Internals: ChocoLUXE is a proprietary material utilised in the damper plug, damper seal, damper IFP, and damper support. It's highly dimensionally stable, meaning that parts made from it are more consistent overall and less susceptible to change with exposure to temperature swings or humidity. It is also extremely low friction. Norglide Bushings: Norglide Bushings from Saint Gobain are metal-reinforced, self-lubricating bushings with a layer of a low friction PTFE compound. They're exceptionally smooth and durable. Reduced Friction: In addition to part updates, MRP also continued to refine its processes. In whole, these part and process changes have resulted in a 37% reduction in friction compared to first-generation Ribbon forks. Travel-adjustable coil spring system with preload adjustment and Ramp Control technology. New EssenTTial twin-tube, bladder-free damper utilising a low-pressure IFP. Outcast arch design with forward-facing weight reliefs to mitigate mud build-up. PSST pressure-relief valves that quickly and easily bleed off excess pressure in the lowers caused by elevation and temperature changes. "Boost" spacing and 35mm stanchions.Manufacturer's Part Numbers: FKMRR7209 Black 29"/27.5"+ 160mm 46mm FKMRR7208 Black 29"/27.5"+ 150mm 46mm FKMRR7213 Black 27.5" 150mm 39mm FKMRR7214 Black 27.5" 160mm 39mmBuy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Ribbon Air ForkFeaturing 35mm stanchions, combined with MRP's renowned technologies, this mountain bike (MTB) fork is ready for the rigours of enduro racing and all mountain riding terrain conditions. This model is equipped with Boost axle spacing, which gives it additional stiffness and strength as you tackle unpredictable, mixed terrains, while also ensuring smooth, effective and consistent handling as you weave between the trails. MRP Ribbon forks have received updates including the ChocoLUXE internals and Norglide Bushings, providing less stiction and better-than-ever performance.Enduro Forks with Adjustable Air Spring SystemMRP's goal in designing the Ribbon was seemingly impossible: building on the success of the heralded Stage, create a fork with higher performance, more adjustability, more features, all at a significantly lower weight. Those incredible demands meant that the brand had to reimagine elements like casting design, reconfigure damper architecture, and completely retarget performance goals. The result is not just the best fork they've ever produced, they've classed it as the new industry benchmark.With other features like the highly tuneable FulFill air-spring, low-pressure IFP damper, PSST pressure relief valves, and Outcast arch design and the acclaimed Ramp Control technology, this is the enduro fork to have. Features: Stanchions: 35mm Use: All mountain, Enduro Axle: 15x110mm Boost QR axle standard; Bolt-on optional (available separately) Air Spring System: FulFill independent positive & negative chamber system External Adjustments: Positive/negative air-spring pressure, 8-position low-speed compression, 16-position Ramp Control, and rebound Internal Adjustments: Travel (in 5mm increments) Brake Mount: 180mm, post mount Fork Travel/Offset: Multiple options available to select Axle To Crown Length: 27.5" Option with 150mm travel: 542mm; 27.5" Option with 160mm travel: 552mm; 27.5+/29" Option with 150mm travel: 562mm; 27.5+/29" Option with 160mm travel: 572mm Weight: 27.5" Option: 1.88kg; 27.5+/29" Option: 1.95kgTechnologies: ChocoLUXE Internals: ChocoLUXE is a proprietary material utilised in the damper plug, damper seal, damper IFP, and damper support. It's highly dimensionally stable, meaning that parts made from it are more consistent overall and less susceptible to change with exposure to temperature swings or humidity. It is also extremely low friction. Norglide Bushings: Norglide Bushings from Saint Gobain are metal-reinforced, self-lubricating bushings with a layer of a low friction PTFE compound. They're exceptionally smooth and durable. Reduced Friction: In addition to part updates, MRP also continued to refine its processes. In whole, these part and process changes have resulted in a 37% reduction in friction compared to first-generation Ribbon forks. FullFill air-spring system with independently adjustable positive and negative air-chambers for greater tunability. New EssenTTial twin-tube, bladder-free damper utilizing a low-pressure IFP. Outcast arch design with forward-facing weight reliefs to mitigate mud build up. PSST pressure-relief valves that quickly and easily bleed off excess pressure in the lowers caused by elevation and temperature changes. "Boost" spacing and 35mm stanchions.Manufacturer's Part Numbers: FKMRR7151 Black 27.5" 150mm 44mm FKMRR7152 Black 27.5" 160mm 44mm FKMRR7164 Black 29"/27.5"+ 150mm 46mm FKMRR7165 Black 29"/27.5"+ 160mm 46mm Buy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Ribbon Coil Mountain Bike ForkComing equipped with 35mm stanchions along with MRP's finest technologies, this trail-ready mountain bike (MTB) fork gives all mountain and enduro racers exceptional front end suspension performance on the most rigorous of terrain conditions. Coming kitted out with Boost axle spacing, this model provides a stronger and stiffer construction, as well as more effective and precise handling as you tackle rock gardens, tree roots and debris. MRP Ribbon coil forks have also received updates including the ChocoLUXE internals and Norglide Bushings, which deliver less stiction and better-than-ever performance.Enduro MTB Fork with Coil SpringThe Ribbon Coil gives you the spring tunability and stroke control previously found only with air, while giving you the supple linear spring curve, lower friction, longer service life and consistent feel that you get with a coil spring. Coil aficionados have dreamt of a fork that combines these advantages with the latest in chassis and damper technology. MRP has delivered with the Ribbon Coil.Also including tried and tested features like the PSST pressure relief valves, bladder-free EssenTTial damper utilising a low-pressure IFP, Outcast arch design and the acclaimed Ramp Control technology, this is the hard-hitting enduro fork to have.Features: Stanchions: 35mm Use: All Mountain, Enduro Axle: 15x110mm Boost QR axle standard, Bolt-on optional (available separately) Steerer Diameter: 1 1/8-1.5" tapered Spring System: Coil Soft, medium & firm springs included External Adjustments: Preload, 8-position low-speed compression, 20-position Ramp Control, and rebound Brake Mount: 180mm, post mount Fork Travel/Offset: Multiple options available to select Axle to Crown Length: 27.5" Option with 150mm travel: 542mm; 27.5" Option with 160mm travel: 552mm; 27.5+/29" Option with 150mm travel: 562mm; 27.5+/29" Option with 160mm travel: 572mm Weight: 27.5" Option: 2.08kg; 27.5+/29" Option: 2.11kgTechnologies: ChocoLUXE Internals: ChocoLUXE is a proprietary material utilised in the damper plug, damper seal, damper IFP, and damper support. It's highly dimensionally stable, meaning that parts made from it are more consistent overall and less susceptible to change with exposure to temperature swings or humidity. It is also extremely low friction. Norglide Bushings: Norglide Bushings from Saint Gobain are metal-reinforced, self-lubricating bushings with a layer of a low friction PTFE compound. They're exceptionally smooth and durable. Reduced Friction: In addition to part updates, MRP also continued to refine its processes. In whole, these part and process changes have resulted in a 37% reduction in friction compared to first-generation Ribbon forks. Travel-adjustable coil spring system with preload adjustment and Ramp Control technology. New EssenTTial twin-tube, bladder-free damper utilising a low-pressure IFP. Outcast arch design with forward-facing weight reliefs to mitigate mud build-up. PSST pressure-relief valves that quickly and easily bleed off excess pressure in the lowers caused by elevation and temperature changes. "Boost" spacing and 35mm stanchions.Manufacturer's Part Numbers: FKMRR7209 Black 29"/27.5"+ 160mm 46mm FKMRR7208 Black 29"/27.5"+ 150mm 46mm FKMRR7213 Black 27.5" 150mm 39mm FKMRR7214 Black 27.5" 160mm 39mmBuy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.