Corner pocket frame bag from Merritt, with large main compartment, slim inner pocket for your phone or keys and hidden stash pocket on top.
Nylon press-fit bar ends with a molded in steel washer that prevents handlebars from cutting through the bar end. Weight: 22g / 0.8oz.
The Merritt Battle Freecoaster uses a traditional clutch style system paired with the 9T Diamond Driver (the driver comes with a lifetime guarantee). The driver replaces the small bearings, the most common source of failure in freecoasters, with polymer bushings along its entire length. The hub shell is super slim and CNC’d 6061 aluminum with a hollow chromoly axle. The hub comes set with maximum slack (we recommend running it like this) but adjustment washers are included to reduce slack if desired. The Battle Freecoaster is laced to The Battle Rim, The Battle Rim steps away from the low profile trend we’ve been seeing in BMX with some taller sidewalls to give the rim a little more beef. The Battle rim is made from 6061-aluminum with a 39mm width and a welded seam to ensure strength. It’s a double wall rim and it has a beefy ridge in the middle to help prevent spokes from blowing out. Available in RHD and LHD. ###section### Product Specs WHEEL SIZE:20" HUB:Merritt Battle Freecoaster AXLE:14mm Chromoly Male DRIVE SIDE:Right Side Drive RIM:Merrit Battle Rim SPOKES:Butted NIPPLES:Brass WEIGHT:1090g / 38.4oz E3
Charlie Crumlish signature grips, soft kraton rubber with a flangeless design that's long and thin. Plastic bar ends included. ###section### Product Specs DIAMETER: 30mm LENGTH: 160mm PACK SIZE: 2 (Pair)
The Hightop Headset is a Campy spec integrated headset with a 20mm tall CNC 6061 aluminum cap with laser engraved logos, two sealed bearings and an aluminum compression ring. Keeps things simple and clean by removing the need for extra headset spacers. Weight: 82g (2.9oz)
Universal plastic hub guard that easily attaches to the spokes with a simple spring clip that keeps the guard under tension and in place. The tension system is away from the grind side, so it isn't affected as the guard wears down. Works on most front hubs and some rear hubs. Weight: 25g / 0.9oz.
Plastic hub guard from Merritt. By using a heat-treated 4140 chromoly core, the replaceable plastic sleeve can be extra thick without making the guard too big, keeping everything super strong and long lasting. Works perfectly with all of our rear hubs and includes washers to work with most other hubs with threaded 14mm axles. Replaces non-driveside hardware. Weight: 68g / 2.4oz.
The Merritt P1 Pedals are built with a low profile design that utilises a special nylon/fibreglass blend to increase strength and extend pedal life. Micro-knurling and molded pins across the pedal surface area increase grip and keep your feet planted. .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; } ###section### Product Specs TYPE/FITS: 9/16 - 3pc MATERIAL: Nylon BEARINGS: Looseball PACK SIZE: 2 (Pair) WEIGHT: 365g / 12.9oz
Brandon Begin signature sprocket, the Pentaguard, is a super strong five spoke design that is CNC’d 7075 aluminum with a full guard. The strength combined with five rotatable positions means the sprocket will keeping taking abuse for a long time. Available in 25T .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; } ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 147g / 5.2oz
Updated version of Merritt's trusty top load stem. Same clean design details and strength as the original, now with a 30mm rise. CNC’d 6061 aluminum with a 50mm reach. ###section### Product Specs TYPE: Top Load REACH: 50mm RISE: 30mm CLAMPING DIAMETER: 22.2mm WEIGHT: 314g
Trails nowadays are nothing like they used to be, very little pedaling and/or braking and the dirt is usually rock hard. So it didn't make sense to mimic MX tyres and Brian Foster rides a mix of everything. Brian's tyre needs to work well on everything, that lead to giving the FT1 a relatively smooth centre section to make the tyre as fast as possible. Turning is when an increase in grip is needed, so when you lean the bike over in a turn that's when the micro-knobs come into play. The micro-knobs provide a perfect balance of surface area, stability and space in between for when the dirt might be a little soft still. Sticking up above the main surface a small amount allows them to sink into that slightly soft dirt and give an increase in surface area contact. Those micro-knobs don't negatively affect stability or grip on hard surfaces though, the edges of the tread pattern are smooth tread blocks that help protect the sidewall on ramps or street. Max pressure rating: 110 psi .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; } ###section### Product Specs WHEEL SIZE: 20" MAX PRESSURE: 110 PSI WEIGHT: 671g (23.6oz) PACK SIZE: Single
Billy Perry's new signature mushroom style grip from Merritt. Based on the proven Sawyer grips pattern, now longer with an all new super soft compound. ###section### Product Specs DIAMETER: 32mm LENGTH: 167mm PACK SIZE: 2 (Pair)
The Merritt Battle front wheel is built using a Merritt Battle rim and laced 3X with black spokes and black brass nipples to a 36H Merritt Non-Stop front hub. ###section### Product Specs WHEEL SIZE: 20" HUB: Merritt Non-Stop front hub AXLE: Female RIM: Merritt Battle rim SPOKES: 14 gauge spokes NIPPLES: Brass WEIGHT: TBC
The SL1 kevlar seat is a clean looking and strong pivotal seat with a super durable kevlar cover and simple branded leather center patch. ###section### Product Specs TYPE: Pivotal PADDING: Padded WEIGHT: 10.1oz
Charlie Crumlish signature grips, soft kraton rubber with a flangeless design that’s long and thin. Plastic bar ends included. ###section### Product Specs DIAMETER: 30mm LENGTH: PACK SIZE: 2
The Itsy grip is a 175mm long flangeless grip with a simple and comfortable geometric design. Made with a soft kraton rubber compound and includes ultra durable Merritt Insert Bar Ends. .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; } ###section### Product Specs DIAMETER: TBC LENGTH: 175mm PACK SIZE: 2 (Pair)
Simplicity, strength and functionality, that's the Merritt Inaugural Front Load Stem. This clean and simple front load style is built from CNC machined 6061-T6 aluminium for strength with its hollowed out center section saving weight without affecting strength at all. Solid chromoly bolts lock the stem and your bars securely in place. For the finishing touches Merritt went with a chamfered edge design and a cast, countersunk Merritt badge. ###section### Product Specs TYPE: 22.2mm REACH: 50mm RISE: 6mm CLAMPING DIAMETER: Front Load WEIGHT: 315g (11.1oz)
The Slaughter Bars are designed and made to be extra strong without being overbuilt. The bends of the uprights and crossbar provide maximum welding surface area for ultimate strength. Further down the uprights ovalise and wrap around the stem clamp bar, again maximizing welding area and reducing flex associated with taller handlebars. Constructed of multi-butted 4130 chromoly and post-weld heat-treated. ###section### Product Specs Rise: Multiple Options Width: 29.25" Up Sweep: 2° Backsweep: 12° Bar Clamping Diameter: 22.2mm Bar Type: 4 Piece Weight: TBC ###section### ###shogun-image-section###
The Snake bars from Merritt are multi-butted heat-treated chromoly with dual radius bends and a 19mm crossbar. The bends provide maximum welding surface area for ultimate strength. ###section### Product Specs Rise: 9.5" Width: 29.25" Up Sweep: 1° Backsweep: 11° Bar Clamping Diameter: 22.2mm Bar Type: 2 Piece Weight: TBC ###section### ###shogun-image-section###
The Low Top Headset is an integrated headset with a CNC’d 6061 aluminum cap with laser engraved logos, two sealed bearings and an aluminum compression ring. These are for the people who have high head tubes with low clearance or a shorter fork base.