MAGURA Royal Blood – technology from brake specialist All MAGURA brakes use low viscosity mineral oil (Royal Blood) as hydraulic medium. Contrary to DOT brake liquid it irritates human skin nor damage the paint off your frame.Biggest asset: It does not absorb water and actually lubricates the whole system. Regular bleeding caused of old brake liquid is therefore not necessary!5 Years leak proof warranty by using MAGURA Royal Blood. Please pay attention to the safety instructions on the packaging working with Royal Blood.,For all MAGURA disc and rim brakes. ,100ml,250ml or 1000ml.
If bleeding is necessary after a fall and repair of the tubing, use only Magura Blood hydraulic oil and not DOT brake liquid. The bleeding of a MAGURA brake is not a routine chore, because this special oil does not absorb water, it lubricates the whole braking system.
Magura Royal Blood Mineral Oil The bleeding of a MAGURA brake is not a routine chore, because the MAGURA Blood hydraulic oil does not absorb water. It in fact lubricates the whole braking system. If ever filling and bleeding is necessary after a fall and repair of the tubing, use only MAGURA Blood hydraulic oil and never DOT brake liquid.Buy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Magura O-Rings for banjo hose fitting.
Magura O Ring for MT8/6/4 (Pack of 20)Magura O-Rings for banjo hose fitting.Features: Pack of 20 Compatible with MT8 MT6 MT4 disc brakes.Buy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
EBT screws complete with O-ring, bleed screw for reservoir, T25 (2 pcs) EBT-bleed screw for reservoir with O-Ring,Torx T25 .Delivery includes 2 pieces.
Specification:Material: Carbotecture®,Delivery includes one handle bar clamp but no bolts..
Specification:no screws,Scope of delivery: 1 piece.
Easy-to-fit, this simple adapter presses on to your remote to improve the size and angle of your switch, for a more confident dropping performance.
Magura Vyron Dropper Seatpost Remote CapThe Magura Vyron Remote Cap significantly improves the ergonomics and provides a higher level of comfort when using your eLECT Remote. This cap is simply pushed over the existing eLECT remote and makes the angle of operation better for many riders.Features:Genuine Magura componentDurableErgonomicBuy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
QM 7 Adaptor: 203mm PM 6” fork mount Adapts Post-mount (PM) caliper to Post-mount (PM) fork mount (6") for use with 203mm rotor Includes Mounting Bolts Weight: 34g QM 10 Adaptor: 180mm IS rear frame mount Adapts Post-mount (PM) caliper to International Standard (IS) rear mount; for use with 180mm rotor Includes Mounting Bolts Weight: 37g QM 11 Adaptor: 160mm IS 6” fork mount + 203mm 8” Fox 40 fork mount Adapts Post-mount (PM) caliper to International Standard (IS) fork mount (8"/203mm, e.g. Fox 40), and adapts PM caliper to IS front fork for 160mm rotor This bracket works for both fork and rear-frame mounting Includes Mounting Bolts Weight: 30g QM 12 Adaptor: 180mm IS 6” fork mount + 160mm IS rear frame mount (not PM) Adapts Post-mount (PM) caliper to International Standard (IS) fork mount (6"/160mm) for use with 180mm rotor in front, and adapts PM caliper to IS frame rear for 160mm rotor This bracket works for both fork and rear-frame mounting Includes Mounting Bolts Weight: 30g QM + 20 Adaptor: 180mm/PM 6” 160mm/PM 5” Includes Mounting Bolts
Magura MTB Disc Brake Caliper Cover KitThis brake cover kit is ideal for replacing your old or worn-out existing caliper covers on your MAgura hydraulic disc brakes. This makes them perfect for upgrading your existing parts and breathing new life back into your disc brake's finish.Features: Genuine Magura replacement partsBuy Magura Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Magura MTB Disc Brake Caliper Cover KitThis brake cover kit is ideal for replacing your old or worn-out existing caliper covers on your MAgura hydraulic disc brakes. This makes them perfect for upgrading your existing parts and breathing new life back into your disc brake's finish.Features: Genuine Magura replacement partsBuy Magura Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
VYRON eLECT Seatpost Seatpost clamp bolts inc. nuts (1 pc)
Magura Brake Mount AdaptorMagura Disc Brake AdaptorsQM 7 Adaptor: 203mm PM 6” fork mount Adapts Post-mount (PM) caliper to Post-mount (PM) fork mount (6") for use with 203mm rotor Includes Mounting Bolts Weight: 34gQM 10 Adaptor: 180mm IS rear frame mount Adapts Post-mount (PM) caliper to International Standard (IS) rear mount; for use with 180mm rotor Includes Mounting Bolts Weight: 37gQM 11 Adaptor: 160mm IS 6” fork mount + 203mm 8” Fox 40 fork mount Adapts Post-mount (PM) caliper to International Standard (IS) fork mount (8"/203mm, e.g. Fox 40), and adapts PM caliper to IS front fork for 160mm rotor This bracket works for both fork and rear-frame mounting Includes Mounting Bolts Weight: 30gQM 12 Adaptor: 180mm IS 6” fork mount + 160mm IS rear frame mount (not PM) Adapts Post-mount (PM) caliper to International Standard (IS) fork mount (6"/160mm) for use with 180mm rotor in front, and adapts PM caliper to IS frame rear for 160mm rotor This bracket works for both fork and rear-frame mounting Includes Mounting Bolts Weight: 30gQM + 20 Adaptor: 180mm/PM 6” 160mm/PM 5” Includes Mounting BoltsBuy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Magura MTB Brake Lever Handlebar ClampThis handlebar clamp has been specially designed as a replacement for Magura HS11/HS33 disc brake levers. Genuine Magura spare part.Features: Compatibility: HS11/HS33 disc brake levers Genuine Magura ClampPlease Note: No bolts are included with this itemBuy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Magura Brake Mount AdaptorMagura Disc Brake AdaptorsQM 7 Adaptor: 203mm PM 6” fork mount Adapts Post-mount (PM) caliper to Post-mount (PM) fork mount (6") for use with 203mm rotor Includes Mounting Bolts Weight: 34gQM 10 Adaptor: 180mm IS rear frame mount Adapts Post-mount (PM) caliper to International Standard (IS) rear mount; for use with 180mm rotor Includes Mounting Bolts Weight: 37gQM 11 Adaptor: 160mm IS 6” fork mount + 203mm 8” Fox 40 fork mount Adapts Post-mount (PM) caliper to International Standard (IS) fork mount (8"/203mm, e.g. Fox 40), and adapts PM caliper to IS front fork for 160mm rotor This bracket works for both fork and rear-frame mounting Includes Mounting Bolts Weight: 30gQM 12 Adaptor: 180mm IS 6” fork mount + 160mm IS rear frame mount (not PM) Adapts Post-mount (PM) caliper to International Standard (IS) fork mount (6"/160mm) for use with 180mm rotor in front, and adapts PM caliper to IS frame rear for 160mm rotor This bracket works for both fork and rear-frame mounting Includes Mounting Bolts Weight: 30gQM + 20 Adaptor: 180mm/PM 6” 160mm/PM 5” Includes Mounting BoltsBuy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Magura Brake Mount AdaptorMagura Disc Brake AdaptorsQM 7 Adaptor: 203mm PM 6” fork mount Adapts Post-mount (PM) caliper to Post-mount (PM) fork mount (6") for use with 203mm rotor Includes Mounting Bolts Weight: 34gQM 10 Adaptor: 180mm IS rear frame mount Adapts Post-mount (PM) caliper to International Standard (IS) rear mount; for use with 180mm rotor Includes Mounting Bolts Weight: 37gQM 11 Adaptor: 160mm IS 6” fork mount + 203mm 8” Fox 40 fork mount Adapts Post-mount (PM) caliper to International Standard (IS) fork mount (8"/203mm, e.g. Fox 40), and adapts PM caliper to IS front fork for 160mm rotor This bracket works for both fork and rear-frame mounting Includes Mounting Bolts Weight: 30gQM 12 Adaptor: 180mm IS 6” fork mount + 160mm IS rear frame mount (not PM) Adapts Post-mount (PM) caliper to International Standard (IS) fork mount (6"/160mm) for use with 180mm rotor in front, and adapts PM caliper to IS frame rear for 160mm rotor This bracket works for both fork and rear-frame mounting Includes Mounting Bolts Weight: 30gQM + 20 Adaptor: 180mm/PM 6” 160mm/PM 5” Includes Mounting BoltsBuy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Magura MTB Disc Brake Caliper Cover KitThis brake cover kit is ideal for replacing your old or worn-out existing caliper covers on your MAgura hydraulic disc brakes. This makes them perfect for upgrading your existing parts and breathing new life back into your disc brake's finish.Features: Genuine Magura replacement partsBuy Magura Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
MT7 Cover-kit, for brake lever assembly left & right (4 pcs)MT7 Cover-Kitfor brake handle right an left,PU = 4 pieces.