PWR Rider is a 450 lumen bike light that can also be used as a power bank. Includes the option to program your brightness and runtime (through ModeMaker app) then use your remaining battery to charge your devices. The light outputs in an elliptical beam for broader brighter road coverage; has a 2 hr runtime at max 450 lumens and 4 smart battery indicator LEDs to let the rider know how much charge is left in the light. RUNTIME MODE LUMENS RUNTIME Ride 450 2hrs Commuter 190 5.5hrs Stamina 50 16hrs Pulse 320 7hrs Strobe Flash 190 10hrs Eco-Flash 50 90hrs FEATURES The two Charger lights come with 5 pre-programmed modes just in case you haven't yet discovered the ModeMaker app. The PWR Rider will last 2 hours at 450 lumens and for those with stamina will run at 200 lumens for 5 hours. Elliptical beam - Elliptical beam for wide view works with spot beam for intense light in front of front wheel. Programs your modes - The ModeMaker app lows you to design the modes for any PWR bike light. Simply plug in your light then select and tailor modes from the menu. You can do things such as control brightness adjust runtimes and add new light modes. Charge your devices - Rear of the light is a USB rechargeable power bank. Use this to charge your phone GoPro or cycle computer on the go. 1 hour riding @450 lumens means you can top up charge your iPhone by 35%. Charge time 3.5 hours. SPECIFICATION Light output: 450 Lumens. Power Bank: 2200 mAh. Dimensions: 122 x 30mm ∅. Weight: 115g. Battery indicator. CNC Machined. Programmable modes. USB rechargable. Water resistant when cap is on. INSTRUCTIONS Fitting your new light to your bike: Place your light on the handle bar with knog logo on strap facing forward. There are two holes to choose from depending on your bar diameter. Using the button: To turn on press and hold on/off button until the light turns on. To turn off press and hold the button until the light switches off. To change modes once the light is on a short press of the button changes modes. Charging your lights: PWR Commuter and PWR Rider use a micro USB input to charge. Find this under the end cap. Press RED button to release cap.
PWR Helmet/GoPro Mount - for holding charger and modular lights on top of helmet (Excludes PWR Mountain). Tri-prong system works with GoPro so can be used to mount lights under Garmin and other mounts. FEATURES Compatibility - Works with PWR Charge and Modular lights (not PWR Mountain). Mounting System - Designed to fit most vented helmets common for road and trail cycling. T Slot (For modular) - Allows for quick release of the light when parking your bike. SPECIFICATION Mounting - Fits vented bike helmets & is GoPro compatible. Weight - 20g.
PWR stands out. Not literally though. In fact the system of mounts are designed to hide PWR away. The world-first side mount holds the PWR Road and PWR Trail lights above or below the headstem. And additional mounting options include extension cables to carry away the extra bulk. FEATURES Compatible with - PWR Trail and PWR Road lights. T Slot - Allows for quick release of the light when parking your bike Centric Mounted - Design allows the light to be centrally positioned both above and below the handlebar. Thumbscrew - Allows for additional tightening. SPECIFICATION Fits Handlebars:22.2mm - 31.8mm ∅. Compatibility: For PWR Road and PWR Trail Light. Weight: 20g.
PWR Large Mount for 31.8mm and 35mm handlebars. Specification Included in the pack: 1 x Large Mount. 35mm Shim. 31.8mm Shim. 2.5mm Allen Key. Compatible with: Small Medium and Large PWR Banks.
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone but also a remarkable style and choice of materials that embodies a rider's personality. The new Oi Luxe is luxe in every sense of the word. It's CNC machined ringer and brass dinger stitched 'vegan' leather shim and metal injection moulded stainless steel make it a pleasure to have on your handlebars. SIZE: Small bell fits bars 22.2mm diameter // Large bell fits bars 23.8mm - 31.8mm (How to measure your handlebars). The Large Oi Luxe fits 23.8 - 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Features THE LOOKWhere bells usually protrude up or out Oi Luxe doesn't. It appears to hover around the handle bars. In one sense it's discreet. But in another it stands out as unrecognisable. THE SOUNDWe tested numerous prototypes to get the perfect pitch length of ring and volume. With a CNC-machined brass dinger the strike of the bell is firm and fast allowing a good balance of volume and longevity of sound. Specification CNC Machined. Distinctive tone. Low profile. Fits handlebar diameters: 23.8 - 31.8mm. Weight: 46.5g.
Australian bicycle accessories brand Knog have design innovation in their DNA having been started 17 years ago by an industrial designer and engineer respectively. Constantly looking to improve the products that they bring to market and this is once again the case with their latest bike light the Cobber. stand out feature of this new Cobber light is the 330° of light that is produced meaning cyclists can be clearly seen from both sides as well as the front and rear. In an increasingly busy world this bike light is brilliantly effective at attracting attention and helping keep cyclists safe. Packing a whopping 470 lumens in the big Cobber through to 110 lumens in the Lil Cobber these lights are seriously bright. Other notable features include their integrated USB recharging meaning you can just plug it into your computer to charge it is 100% waterproof as you would expect and there is even the ability to programme the light modes making it fully customisable. If you are looking for the best commuter bike light of 2019 look no further. 3 Channels - Place on steerer or seat post for 330° beam and vertical flash patterns. Eyesaver mode - Switch to eyesaver mode when placing front light on your handlebars. Chip on board ('COB' LED) - More compact and efficient technology. Handy USB Charge - Light plugs directly into your wall USB or computer. Quick release mount - Fit Aero & standard bars steerers & seatposts. 3 straps included. 100% waterproof. 330° Visibility. Features Weight: 25g. Eyesaver mode. 330° visibility. Chip on board. Programmable modes. For day & night. Integrated USB rechargeable. 100% waterproof. Fits standard & aero handlbars (3 straps included). Runtime MODE LUMENS RUNTIME Max Steady 75 2hrs Flash 170 6.5hrs Eco Flash 15 100hrs
Houston - 1987: a lab frog escapes from its enclosure and knocks a vile of stinky chemical gunk onto an unsuspecting LED giving it special powers. The light escaped to a nearby medium security retirement home where it spawned an army of multi-coloured freaks hidden from civilization... until now. SPECIFICATIONS Dimensions: 80x35x42 mm Weight: 19g Materials: Industrial Silicone Body LEDs: Hi Powered surface mounted LED strobe system with lens. Battery: x2 CR2032 coin cell lithium batteries (included). Peak brightness: Front 8.5 Lumens Rear 2.5 Lumens 4 Light modes: Constant Strobe Flash Fast Flash Random Strobe.. Run-time: FRONT LIGHT : 80 hrs (flashing) 50 hrs (steady). REAR LIGHT : 70 hrs (flashing) 40 hrs (steady). Designed and engineered to withstand the harshest of weather conditions. FEATURES Visibility: 600 metresToolless attachment for quick release mounting and & unmounting
Houston - 1987: a lab frog escapes from its enclosure and knocks a vile of stinky chemical gunk onto an unsuspecting LED giving it special powers. The light escaped to a nearby medium security retirement home where it spawned an army of multi-coloured freaks hidden from civilization... until now. SPECIFICATIONS Dimensions: 80x35x42 mm Weight: 19g Materials: Industrial Silicone Body LEDs: Hi Powered surface mounted LED strobe system with lens. Battery: x2 CR2032 coin cell lithium batteries (included). Peak brightness: Front 8.5 Lumens Rear 2.5 Lumens 4 Light modes: Constant Strobe Flash Fast Flash Random Strobe.. Run-time: FRONT LIGHT : 80 hrs (flashing) 50 hrs (steady). REAR LIGHT : 70 hrs (flashing) 40 hrs (steady). Designed and engineered to withstand the harshest of weather conditions. FEATURES Visibility: 600 metresToolless attachment for quick release mounting and & unmounting
Use the PWR Bar-To-Frame Mount to hitch a lighthead to your handlebar with the Tri-prong Side Mount (GoPro compatible) or use the PWR Brakeboss extension mount to attach your lighthead to the front of your bike. Then attach the PWR Bank to your frame with the Frame Mount. Recommended for saving bar space with the PWR Trail and PWR Mountain setups. FEATURES Mounting: Fits 22.2mm bars up to oversize bars 35mm in diameter. Thumbscrew: Allows for tightening by hand or for additional tightening use Allen key. Spacers: 3 size spacers to allow mount to fit various bar sizes. SPECIFICATION Mounting: Attaches PWR light head to handlebars and brake boss. Cable Length (stretched): 80cm. Compatibility: Compatible with the PWR Road PWR Trail and PWR Mountain light heads.
Use the PWR Frame Mount to secure your PWR Bank and PWR Sound to the frame on your bike. Attach using velcro straps for multi size tubes and easily cut off Velcro ends for the perfect length. SPECIFICATION Mounting: Attaches PWR Bank and PWR Sound to frame of bike. Compatibility: Compatible with PWR Banks and PWR Sound.
Add rear light functionality and mount your PWR Rider or PWR Commuter to your helmet. PWR Red Cap gives you a 12 lumen narrow rear light beam for day and night visibility. Can be programmed with Knog's Modemaker app. Specification Peak brightness: 12 Lumens For use with: PWR Rider / Commuter. Include helmet mount (Also works with GoPro®). What's in the pack: PWR Red Cap Helmet Mount & Adapter. Narrow beam for distance visibility. Water resistant. Programmable modes.
If you're looking at adding to your lighting solutions the PWR Lighthead 700L can be a cost effective way of doing just that. It outputs an elliptical style beam for broad and bright road coverage and is compatible with the PWR Modular System. While pre-programmed with 6 modes you can customise these to suit your needs with Knog’s Modemaker app – control brightness adjust runtimes and add modes. BROAD AND BRIGHT COVERAGE - The PWR Lighthead 700L outputs an elliptical style beam for broader and brighter road coverage. This modular 700 lumen lighthead can be swapped between small medium and large PWR Bank batteries for longer runtimes. PROGRAM YOUR LIGHT - When Knog designs each light we put optics at the heart of that equation. Whether it's new LED formations or beam patterns we are committed to making each lumen work harder once you're on the road. You can program the light to suit your needs with Modemaker – control brightness adjust runtimes and add new light modes. SPECIFICATION Dimensions - H: 44mm x W: 31mm x L:31mm. Weight - 34 grams. Lumens - 700. A powerful 700 lumen output Compatible with all Knog PWR Banks 6 light modes + customisable using Knog's Modemaker app Waterproof with IP66 rating (storm proof) when connected to a PWR Bank Runtimes of up to 250 hrs when paired with PWR Bank Medium Easy twist operation Light Modes This table represents the light modes when paired with a PWR Bank Small to make a 700 lumen flashlight or bike light (additional mount required) MODE LUMENS RUNTIME Max 700 1.7 hrs Mid 360 3.4 hrs Stamina 70 20 hrs Pulse 650 7 hrs Strobe 275 10 hrs Eco-Flash 70 165 hrs
The PWR Lighthead 1100L is part of Knog’s PWR Modular System and when combined with a small medium or large PWR Bank can make for a powerful front bike light head torch or flashlight. If you're looking at adding to your lighting solutions this can be a cost effective way of doing just that. The PWR Lighthead 1100L has an elliptical style beam with a horizontal and vertical spread for broader and brighter road or trail coverage. You can also program this lighthead to suit your needs using Knog’s Modemaker app – control brightness adjust runtimes and add new light modes. BROAD AND BRIGHT COVERAGE - The PWR Lighthead 1100L outputs an elliptical style beam for broader and brighter road coverage. This modular 1100 lumen lighthead can be swapped between small medium and large PWR Bank batteries for longer runtimes. PROGRAM YOUR LIGHT - When Knog designs each light we put optics at the heart of that equation. Whether it's new LED formations or beam patterns we are committed to making each lumen work harder once you're on the road. You can program the light to suit your needs with Modemaker – control brightness adjust runtimes and add new light modes. SPECIFICATION Dimensions - H: 45mm x W: 35mm x L:35mm. Weight - 54 grams. Lumens - 1100. Runtimes if lighthead is paired with PWR Bank Small. A powerful 1100 lumen output Compatible with all Knog PWR Banks 6 light modes + customizable using Knog's Modemaker app Waterproof with IP66 rating (storm proof) when connected to a PWR Bank Runtimes of up to 250 hrs when paired with PWR Bank Medium INSTRUCTIONS Operation: PWR Lightheads have no buttons! Instead we use rotation to switch the light on & between modes. To turn light On / Off: Rotate the lighthead until it stops and hold in place for 1 second or until the light turns on / off. To change the modes: Once the light is on you can simply change the mode by rotating the light head until it stops. It will spring back into position. Light Modes This table represents the light modes when paired with a PWR Bank Medium to make a 1100 lumen flashlight or bike light (additional mount required) MODE LUMENS RUNTIME Max 1100 1.7 hrs Mid 600 2.5 hrs Stamina 90 18 hrs Pulse 330 7 hrs Strobe 250 12 hrs Eco-Flash 17 250 hrs
The PWR Lighthead 2000L is part of Knog’s PWR Modular System and when combined with a small medium or large PWR Bank can make for a powerful front bike light head torch or flashlight. If you're looking at adding to your lighting solutions the PWR Lighthead 2000L can be a cost effective way of doing just that. While pre-programmed with 6 modes you can customise these to suit your needs with Knog’s Modemaker app – control brightness adjust runtimes and add modes. FEATURES Compatibility - The 2000L lighthead is compatible with the 3350mAh 5000mAh and 10000mAh PWR Banks. Program your modes - Plug your lighthead into your computer download the ModeMaker app and then tailor light modes to your light. Light Beam - Lighthead with elliptical plus spot beam. Especially effective to “be seen”. Accessories Included - Male-Female USB cable. SPECIFICATION Lighthead Output:2000 Lumens. Dimensions:48mm Ø. A powerful 2000 lumen output Compatible with all Knog PWR Banks 6 light modes + customisable using Knog's Modemaker app Waterproof with IP66 rating (storm proof) when connected to a PWR Bank Runtimes of up to 200 hrs when paired with PWR Bank Large Easy twist operation Light Modes This table represents the light modes when paired with a PWR Bank Large to make a 2000 lumen flashlight or bike light (additional mount required) MODE LUMENS RUNTIME Max 2000 2 hrs Mid 500 9 hrs Stamina 200 30 hrs Pulse 1000 20 hrs Strobe 250 35 hrs Eco-Flash 150 200 hrs
Recharge your devices on the go with this 3350 mAh power bank and stay out for longer. PWR Bank is also part of Knog's PWR Modular System an ecosystem of bike and outdoor products designed to share their battery. So with the addition of a PWR light head or mount you can turn this PWR Bank into a powerful flashlight front bike light or power the PWR Sound or PWR Lantern. A super tough and durable 3350 mAh power bank and potential for so much more you decide. Quick Charge Long Lasting The Small PWR Bank is a USB rechargeable Li-ion battery with a charge time of 5 hours. The 4 LEDs on the side light up sequentially when charging and also show how much capacity you have left. One Battery Many Uses It's a brilliant standalone power bank but add a PWR Light head Mount or Lanyard and create another product completely. Minimise the amount of equipment that you need to carry. FEATURES Compatibility - The 3350mAh PWR Bank is compatible with the 600 1000 and 1800 lumen PWR lightheads and PWR outdoor products. Charge your devices - Use this PWR Bank to charge your iPhone or cycling computer on the go. Battery - USB Rechargeable Lii-ion battery. Accessories Included - Micro USB cable. SPECIFICATION Battery output: 3350 mAh. Dimensions: 104mm x 30mm Ø. Weight: 98g. USB-A output Can hold multiple device charges Mini USB rechargeable (cable included) Waterproof with IP66 rating when protective cap on (storm proof) Powers all products in the PWR Modular System Tough and durable aluminium housing Charge / capacity indicators INSTRUCTIONS Charging your PWR bank: PWR Banks use a micro USB input to charge. Using the micro USB cable provided you can plug this into any powered USB port or USB wall plug charger. Charging devices with your PWR bank: To charge a device connect the device's charge cable to the female USB port on the front of the PWR Bank and plug the other end of the USB cable into an available powered USB port.
Recharge your devices on the go with this 5000 mAh power bank and stay out for longer. PWR Bank is also part of Knog's PWR Modular System an ecosystem of bike and outdoor products designed to share their battery. So with the addition of a PWR light head or mount you can turn this PWR Bank into a powerful flashlight front bike light or power the PWR Sound or PWR Lantern. A super tough and durable 5000 mAh power bank and potential for so much more you decide. Quick Charge Long Lasting The Medium PWR Bank is a USB rechargeable Li-ion battery with a charge time of 7 hours. The 4 LEDs on the side light up sequentially when charging and also show how much capacity you have left. One Battery Many Uses It's a brilliant standalone power bank but add a PWR Light head Mount or Lanyard and create another product completely. Minimise the amount of equipment that you need to carry. FEATURES Compatibility - The 5000mAh PWR Bank is compatible with the 600 1000 and 1800 lumen PWR lightheads and PWR outdoor products. Charge your devices - Use this PWR Bank to charge your iPhone or cycling computer on the go. Battery - USB Rechargeable Lii-ion battery. Accessories Included - Micro USB cable. SPECIFICATION Battery output: 5000 mAh. Dimensions: 104mm x 35mm Ø. Weight: 169g. USB-A output Can hold multiple device charges Mini USB rechargeable (cable included) Waterproof with IP66 rating when protective cap on (storm proof) Can power other products in the PWR Modular System Tough and durable aluminium housing Charge / capacity indicators INSTRUCTIONS Charging your PWR bank: PWR Banks use a micro USB input to charge. Using the micro USB cable provided you can plug this into any powered USB port or USB wall plug charger. Charging devices with your PWR bank: To charge a device connect the device's charge cable to the female USB port on the front of the PWR Bank and plug the other end of the USB cable into an available powered USB port.
Recharge your devices on the go with this 10000 mAh power bank and stay out for longer. PWR Bank is also part of Knog's PWR Modular System an ecosystem of bike and outdoor products designed to share their battery. So with the addition of a PWR light head or mount you can turn this PWR Bank into a powerful flashlight or front bike light. A super tough and durable 10000 mAh power bank and potential for so much more you decide. FEATURES Compatibility - The 10000mAh PWR Bank is compatible with the 600 1000 and 2000 lumen PWR lightheads and PWR outdoor products. Charge your devices - Use this PWR Bank to charge your iPhone or cycling computer on the go. Battery - USB Rechargeable Lii-ion battery. Accessories Included - Micro USB cable. SPECIFICATION Battery output: 10000 mAh. Diameter: 48mm Ø. USB-A output Can hold multiple device charges Mini USB rechargeable (cable included) Waterproof with IP66 rating when protective cap on (storm proof) Can power other products in the PWR Modular System Tough and durable aluminium housing Charge / capacity indicators Quick Charge Long Lasting The Large PWR Bank is a USB rechargeable Li-ion battery with a charge time of 7 hours. The 4 LEDs on the side light up sequentially when charging and also show how much capacity you have left. One Battery Many Uses It's a brilliant standalone power bank but add a PWR Light head Mount or Lanyard and create another product completely. INSTRUCTIONS Charging your PWR bank: PWR Banks use a micro USB input to charge. Using the micro USB cable provided you can plug this into any powered USB port or USB wall plug charger. Charging devices with your PWR bank: To charge a device connect the device's charge cable to the female USB port on the front of the PWR Bank and plug the other end of the USB cable into an available powered USB port.
The PWR Road 700 Front Bike Light is one of our best-selling 'see and be seen' lights. Designed for commuters and road cyclists that want to be seen in urban environments as well as being able to light the way ahead on dark roads and paths. Mounting above or below your handlebar to ensure a tidy cockpit you'll be riding confidently with PWR Road 700. PWR Road 700L is a modular bike light. But it's not JUST another bike light. Not only is it a high powered bike light but simply take the product apart and you have much more. A lighthead and a PWR Bank to charge devices that is also the battery for all products in the PWR range. A super bright 700 lumen output 6 light modes + customisable using Knog's Modemaker app Waterproof with IP66 rating (storm proof) Runtimes of up to 165 hrs USB rechargeable Battery can be used separately as 3350 mAh power bank Easy twist operation (perfect for gloves) Mount above or below your handlebar BATTERY INDICATOR - Hate it when you run out of battery with no warning? That'll never happen with PWR Road with 4 built in battery indicator lights. Tap the bottom of the light to activate the battery indicator. 4 lights = fully charged 2 lights = half charged etc. EASY TO MOUNT & USE - This light can be mounted on top or below your handlebars directly under your Garmin or on your helmet. It comes with a side mount and shim that fits handlebars 22.2-38.1mm diameter. Once mounted using PWR Road is a breeze. It's a simple twist-head operation to turn light on & off and to scroll through light modes. CHARGE YOUR DEVICES - Press the red button to release the light head and use the PWR bank to charge your phone GoPro cycle computer or other device. Charge your PWR Road using the included micro USB cable. WIDE BEAM & CUSTOMISABLE MODES - PWR Road outputs a max 700 lumens and can run for up to 195 hours on Eco Flash Mode. Its elliptical beam gives broader bright road coverage. It comes with 6 pre-program d modes and you can program the light to suit your needs with Modemaker. You can control brightness adjust runtimes and add new light modes. RUNTIME MODE LUMENS RUNTIME Max 700 1.7hrs Mid 360 3.4hrs Stamina 70 20hrs Pulse 650 7hrs Strobe Flash 275 10hrs Eco-Flash 70 165hrs SPECIFICATION Dimensions - H: 128mm x W: 31mm x L:31mm. Weight - 125 grams. Lumens - 700. INSTRUCTIONS Connect lighthead to PWR bank:Insert the two lighthead plug pins into the battery. When connected your lightheads LED's will flash. Connect lighthead to sidemount:Slide the mount into the slot on the side of the battery. Then tighten the thumbwheel. To remove the mount you will need to loosen the thumbwheel. Operation:Once the lighthead and battery are connected twist the lighthead and hold to turn on twist and release to change modes.
The PWR Trail Front Bike Light is an extremely bright light that will ensure you're seen and can see on the darkest of nights. Its output is an elliptical style beam with a horizontal and vertical spread for broader and brighter road or trail coverage. PWR Trail is a brilliant all-rounder that will take you from the city to the mountains. And back. PWR Trail is part of Knog’s PWR Modular System meaning you can swap light heads mounts and use its battery as a PWR Bank to charge any USB device. Powerfully bright 1100 lumen elliptical beam USB rechargeable 6 light modes + customisable using Knog's Modemaker app Waterproof with IP66 rating (storm proof) Runtimes of up to 250 hrs Battery can be used separately as 5000 mAh power bank Easy twist operation (perfect for gloves) Mount above or below your handlebar BATTERY INDICATOR - Hate it when you run out of battery with no warning? That'll never happen with PWR Trail with 4 built in battery indicator lights. Tap the bottom of the light to activate the battery indicator. 4 lights = fully charged 2 lights = half charged etc. EASY TO MOUNT & USE - This light can be mounted on top or below your handlebars directly under your Garmin or on your helmet. It comes with a side mount and shim that fits handlebars 22.2-38.1mm diameter. Once mounted using PWR Trail is a breeze. It's a simple twist-head operation to turn light on & off and to scroll through light modes. CHARGE YOUR DEVICES - Press the red button to release the lighthead and use the PWR bank to charge your phone GoPro cycle computer or other device. 1 hour riding @1000 lumens means you can top up charge your iPhone by 75%. Charge your PWR Trail using the included micro USB cable charge time is 3.5 hours. WIDE BEAM & CUSTOMISABLE MODES - PWR Trail outputs a max 1100 lumens and can run for up to 300 hours on Eco Flash Mode. Its elliptical beam gives broader bright road coverage. It comes with 6 pre-programmed modes and you can program the light to suit your needs with Modemaker. You can control brightness adjust runtimes and add new light modes. RUNTIME MODE LUMENS RUNTIME Max 1100 1.7hrs Mid 600 2.5hrs Stamina 90 18hrs Pulse 330 7hrs Strobe Flash 250 12hrs Eco-Flash 17 250hrs SPECIFICATION Dimensions - H: 128mm x W: 35mm x L:35mm. Weight - 230 grams. Lumens - 1100. INSTRUCTIONS Connect lighthead to PWR bank: Insert the two lighthead plug pins into the battery. When connected your lightheads LED's will flash. Connect lighthead to sidemount: Slide the mount into the slot on the side of the battery. Then tighten the thumbwheel. To remove the mount you will need to loosen the thumbwheel. Operation: Once the lighthead and battery are connected twist the lighthead and hold to turn on twist and release to change modes.
The PWR Rider 450 Duo Bike Light Set is a sleek and bright 450 lumen/12 lumen LED dual bike light designed to be mounted on your helmet. Not just a bike light remove the RedCap and it can be used as a power bank for charging USB devices on-the-go. Its light modes can also be programmed to suit your needs using our Modemaker App. Battery Indicator Always know how much battery you have with the 4 indicator lights. Easy To Mount & Use The helmet mount fits most vented helmets and is easy to mount and swap between helmet types. Charge Your Devices The rear of the light is a USB rechargeable power bank. Press the red button to release the cap and use the PWR bank to charge your phone GoPro cycle computer or other devices. Wide Beam & Customisable Modes It has an elliptical beam for broader bright road coverage. It comes with 6 pre-programmed modes and you can program the light to suit your needs with Modemaker. FEATURES The two Charger lights come with 5 pre-programmed modes just in case you haven't yet discovered the ModeMaker app. The PWR Rider will last 2 hours at 450 lumens and for those with stamina will run at 200 lumens for 5 hours. Elliptical beam - Elliptical front light beam for wide view works with spot beam for intense light in front of front wheel. Narrow Beam - Rear light features a narrow beam for day & night visibility. Programs your modes - The ModeMaker app lows you to design the modes for any PWR bike light. Simply plug in your light then select and tailor modes from the menu. You can do things such as control brightness adjust runtimes and add new light modes. Charge your devices - Rear of the light is a USB rechargeable power bank. Use this to charge your phone GoPro or cycle computer on the go. 1 hour riding @450 lumens means you can top up charge your iPhone by 35%. Charge time 3.5 hours. SPECIFICATION Light output: 450 Lumens (Front) / 12 Lumens (Rear). Power Bank: 2200 mAh. Dimensions: 122 x 30mm ∅. Weight: 115g (Excludes mount & Redcap). Battery indicator. CNC Machined. Programmable modes. USB rechargable. Water resistant when cap is on. Helmet mount also works with GoPro®. Light Modes Please note runtimes will be slightly less when RedCap is in use. MODE LUMENS RUNTIME Ride 450 2 hrs Commuter 190 5.5 hrs Stamina 50 16 hrs Pulse 320 7 hrs Strobe 190 10 hrs Eco-Flash 50 90 hrs INSTRUCTIONS Fitting your new light to your bike: Place your light on the handle bar with knog logo on strap facing forward. There are two holes to choose from depending on your bar diameter. Using the button: To turn on press and hold on/off button until the light turns on. To turn off press and hold the button until the light switches off. To change modes once the light is on a short press of the button changes modes. Charging your lights: PWR Commuter and PWR Rider use a micro USB input to charge. Find this under the end cap. Press RED button to release cap.