The IceToolz Pedal and Axle Wrench makes removing and fitting padals easy with its 15mm pedal specific end and it also has 14 & 15mm sockets for crankarm and axle nuts. 15mm pedal wrench14 & 15mm sockets for crankarm bolts and axle nuts.
The IceToolz Hollowtech 2 BB Tool is made from Cro-Mo steel and is a Shimano Hollowtech 2 compatible crank adapter tool. For use with 8mm hex or 3/8 driver.
The IceToolz Shimano Cassette Tool with 12mm Guide Pin stabilises the tool with its guide pin and is compatible with most major brands such as Shimano and SRAM. It can be used with a ½ inch two way rachet or a 21mm spanner.Utilises a 12mm guide pin to stabilize the tool for through-axle hubsFor Shimano CS, SRAM, SunRace, Chris King compatible cassettes and Shimano Centre LOck disc brakesThe guide pin prevents the tool from slipping out of the spline of the cassette lock-ringUse with 1/2" two-way Ratchet Wrench (#53R4) or 21mm spannerProduct dimensions: 7.5 × 2.5 × 2.5cmWeight: 0.095kgColour: Black, SilverMaterial: Cr-V Steel
This IceToolz Chain Tool is for Shimano and Campag chains and is suitable for 5-12 speed chains.For Shimano or Campagnolo chainsPerfect for 5, 6, 7, 8, 9, 10, 11 or 12 speed chains
The IceToolz Cable Cutter cuts inner gear and brake cables and cable housing quickly, clean, and easily. There s a thumb lock function which is easy to operate.
The IceToolz Shimano /ISIS 8 Pin BB Tool is for cartridge bottom brackets and chainring/lockring with 8 external notches. For use with 32mm headset wrench.For Shimano/ISIS Drive compatible cartridge BBs and chainring lockring with 8 external notchesMade from Cro-Mo SteelFor use with 32mm headset wrench
The IceToolz Bosch Lockring tool for Bosch Active/Performance line e-Bikes sprockets.
The IceToolz Portable Chain Tool is for 5-12 Speed Shimano chains and comes with a chain connectors or links case. This clever design uses the thumb-lid that isolates the finger from the greasy chain while locating the chain in the correct position. Compatible with HG / UG / IG chainsProtective cap prevents greasy fingers and keeps the chain fixed
The IceToolz BB Tool for External Shimano makes removing and fitting your Shimano Hollowtech II bottom bracket quick and easy. To be used with a half inch driver.For BBR60 crank adapterCr-Mo steelFor use with 1/2" driver
The IceToolz BB Tool 12 Tooth is for FSA BB386 Evo, Hawk Racing BB3086, RaceFace Cinch, Rotor BSA30, Zipp Vuma and other external bottom bracket systems. Also fits SRAM DUB. Hardened CrMo steel. Use with 1/2" driver.
The IceToolz Crank Removal Tool features 14 and 15mm and an 8mm hex key for crank bolts and crank arm removal.Extra grip handleAttachment for square & hollow axlesIncludes 14 & 15mm sockets
The IceToolz Press-Fit Bearing Removal Tool is a press-fit bottom bracket removal tool, for use on all 24mm and 30mm press-fit bb s.For BB bearings with internal diameter of ø24 - 30mmMaterial: Cr-Mo steel
The IceToolz Pro Shop Chain Tool is suitable for 5-12 Speed chains and makes removing and fitting chains easy. A comfortable and ergonomic handle with a high-quality special guide that positions the chain and prevents greasy fingers. Compatible with Shimano chains (HG / UG / IG).
The IceToolz Ocarina Torque Wrench is a great tool for ensuring you apply the correct torque to fasteners helping to prevent over-tightening and damage to components. Applying the correct torque to your cycle components is essential for a safe and serviceable bike. This accurate torque wrench helps you ensure that the fittings on your bike are tightened to the correct torque and that clamping forces are distributed evenly across clamping surfaces.Torque wrench set includes 3/4/5/6mm hex keys and T-25 Torx bitsTorque range from 3-10NM. Ideal for all mechanics and ridersLightweight and smart design is ideal for all mechanics and ridersErgonomic handle; tightens to the correct torque easily
The IceToolz Bearing Cup Press Tool is for BB30, BB86 and BB386.
Introducing the IceToolz Internal Routing Tool. For simple looking and better appearance nowadays, rider would like to have all the cables & wires hidden inside of bike frame but how Some cables are not soft enough, some are too thick etc. IceToolz is coming with the solution.First, please check what type of cable is hidden digital single wire, brake cable or shift cable. Connect one end below for suitable wire and put other end into the entry position of hidden cable. Holder leader post to guide the internal cable go through until the end.Practical help when pulling brake or gear cable through bicycle framesEdition: 3 cables with magnetColour: orangeMaterial: Plastic-coated stainless-steel cable with magnetic headUse: for aluminium, carbon fibre or titanium framesWeight (kg): 0.106Including: contra magnetic sliding pin
The IceToolz Precision Torque Wrench is a great tool for ensuring you apply the correct torque to fasteners helping to prevent over-tightening and damage to components. Applying the correct torque to your cycle components is essential for a safe and serviceable bike. This accurate torque wrench helps you ensure that the fittings on your bike are tightened to the correct torque and that clamping forces are distributed evenly across clamping surfaces.
The IceToolz Precision Torque Wrench is a great tool for ensuring you apply the correct torque to fasteners helping to prevent over-tightening and damage to components. Applying the correct torque to your cycle components is essential for a safe and serviceable bike. This accurate torque wrench helps you ensure that the fittings on your bike are tightened to the correct torque and that clamping forces are distributed evenly across clamping surfaces.