Hope Floating Disc Brake RotorAn ideal upgrade for performance-seeking trail riders, this Floating Disc Brake Rotor from mountain bike (MTB) component specialists Hope will ensure you get the best out of your bike's hydraulic disc brakes. Made from custom-made stainless steel that's riveted to an Aluminium central carrier, it draws heat away from your brake pads, preventing the dreaded “brake fade” as you're attacking long descents. Suitable for the entire Hope MTB brake range, its braking surface has also been made wider to make it more compatible with other brands on the market.Features: Material: Custom Stainless-Steel braking surface riveted to an Aluminium central carrier Mount Type: 6-bolt Compatibility: Entire Hope Mountain Bike (MTB) brake range and other MTB brands too Laser cut stainless steel braking surface Wider braking surface to make it compatible with other brands Floating design deals with changes in temperature Enhanced durability Versatile Comes with relevant mounting bolts Available in a range of colours Weight: 146g (180mm)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Floating Disc Brake RotorAn ideal upgrade for performance-seeking trail riders, this Floating Disc Brake Rotor from mountain bike (MTB) component specialists Hope will ensure you get the best out of your bike's hydraulic disc brakes. Made from custom-made stainless steel that's riveted to an Aluminium central carrier, it draws heat away from your brake pads, preventing the dreaded “brake fade” as you're attacking long descents. Suitable for the entire Hope MTB brake range, its braking surface has also been made wider to make it more compatible with other brands on the market.Features: Material: Custom Stainless-Steel braking surface riveted to an Aluminium central carrier Mount Type: 6-bolt Compatibility: Entire Hope Mountain Bike (MTB) brake range and other MTB brands too Laser cut stainless steel braking surface Wider braking surface to make it compatible with other brands Floating design deals with changes in temperature Enhanced durability Versatile Comes with relevant mounting bolts Available in a range of colours Weight: 146g (180mm)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Floating Disc Brake RotorAn ideal upgrade for performance-seeking trail riders, this Floating Disc Brake Rotor from mountain bike (MTB) component specialists Hope will ensure you get the best out of your bike's hydraulic disc brakes. Made from custom-made stainless steel that's riveted to an Aluminium central carrier, it draws heat away from your brake pads, preventing the dreaded “brake fade” as you're attacking long descents. Suitable for the entire Hope MTB brake range, its braking surface has also been made wider to make it more compatible with other brands on the market.Features: Material: Custom Stainless-Steel braking surface riveted to an Aluminium central carrier Mount Type: 6-bolt Compatibility: Entire Hope Mountain Bike (MTB) brake range and other MTB brands too Laser cut stainless steel braking surface Wider braking surface to make it compatible with other brands Floating design deals with changes in temperature Enhanced durability Versatile Comes with relevant mounting bolts Available in a range of colours Weight: 146g (180mm)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Tech Master Cylinder Piston Genuine Hope replacement parts Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
As you might have worked out by now, headsets are a bit of a minefield! Integrated, integral, reducers, dimensions and types all contribute to confusing the situation. Don’t panic! We have now made top and bottom cups available separately allowing our headsets to fit almost any frame and fork combination. Hopefully this brochure will help you through choosing the right headset for your bike.A couple of things to remember though - we don’t necessarily do a headset to fit your bike! We have 4 ‘off the shelf’ combinations and a further 18 ‘Pick n Mix’ options. There are other styles, types and fittings out there. The first thing to remember is that you need accurate dimensions if you are at all unsure of what type you need.The second point to remember is that unfortunately there is no ‘standard’ - OK, we have the dimension 1 1/8 inch, which covers the majority of headsets now, but as far as Integral, integrated etc... these are simply terms used by different manufacturers to determine what they consider that style to be. Measure, check and measure again!One thing that is common throughout our range is the quality of materials used to manufacture them, here in our Barnoldswick Factory, the quality of the custom made stainless steel bearings and the time taken to hand assemble each and every one before it leaves, on it’s way to you!Our traditional headset is made to fit standard frames and 1 1/8 inch fork steerers. They include custom made stainless steel bearings (which are replaceable). The cups, taper ring and crown race (which is split for easy installation and removal) are all machined from 2014 T6 aluminium.The integral headset is made to fit low stack 1 1/8 inch frames (please check drawings for exact sizing). They include custom made stainless steel bearings (which are replaceable). The cups, taper ring and crown race (which is split for easy installation and removal) are all machined from 2014 T6 aluminium.The integrated headset is made to fit in 1 1/8 inch frames where the bearings fit directly into the frame. They include custom made stainless steel bearings (which are replaceable). The taper ring and crown race (which is split for easy installation and removal) are all machined from 2014 T6 aluminium.The tapered headset is designed to fit frames which are sized to accept integral 1 1/8 inch top cup and 1.5 inch integral bottom cups, where the fork steerer has a 1.5 crown and a 1 1/8 inch top. It is also possible to fit a standard 1 1/8 inch steerer using an additional conversion crown. The headsets include custom made stainless steel bearings (which are replaceable).The cups, taper ring and crown race (which is split for easy installation and removal) are all machined from 2014 T6 aluminium. All off the shelf headsets come complete with the Hed Doctor. Sealing is achieved through an adjustable taper ring cover and integrated rubber seal.The bearings also incorporate their own sealing, and being made from stainless steel to resist corrosion - a real advantage over a conventional steel bearing.
As you might have worked out by now, headsets are a bit of a minefield! Integrated, integral, reducers, dimensions and types all contribute to confusing the situation. Don’t panic! We have now made top and bottom cups available separately allowing our headsets to fit almost any frame and fork combination. Hopefully this brochure will help you through choosing the right headset for your bike.A couple of things to remember though - we don’t necessarily do a headset to fit your bike! We have 4 ‘off the shelf’ combinations and a further 18 ‘Pick n Mix’ options. There are other styles, types and fittings out there. The first thing to remember is that you need accurate dimensions if you are at all unsure of what type you need.The second point to remember is that unfortunately there is no ‘standard’ - OK, we have the dimension 1 1/8 inch, which covers the majority of headsets now, but as far as Integral, integrated etc... these are simply terms used by different manufacturers to determine what they consider that style to be. Measure, check and measure again!One thing that is common throughout our range is the quality of materials used to manufacture them, here in our Barnoldswick Factory, the quality of the custom made stainless steel bearings and the time taken to hand assemble each and every one before it leaves, on it’s way to you!Our traditional headset is made to fit standard frames and 1 1/8 inch fork steerers. They include custom made stainless steel bearings (which are replaceable). The cups, taper ring and crown race (which is split for easy installation and removal) are all machined from 2014 T6 aluminium.The integral headset is made to fit low stack 1 1/8 inch frames (please check drawings for exact sizing). They include custom made stainless steel bearings (which are replaceable). The cups, taper ring and crown race (which is split for easy installation and removal) are all machined from 2014 T6 aluminium.The integrated headset is made to fit in 1 1/8 inch frames where the bearings fit directly into the frame. They include custom made stainless steel bearings (which are replaceable). The taper ring and crown race (which is split for easy installation and removal) are all machined from 2014 T6 aluminium.The tapered headset is designed to fit frames which are sized to accept integral 1 1/8 inch top cup and 1.5 inch integral bottom cups, where the fork steerer has a 1.5 crown and a 1 1/8 inch top. It is also possible to fit a standard 1 1/8 inch steerer using an additional conversion crown. The headsets include custom made stainless steel bearings (which are replaceable).The cups, taper ring and crown race (which is split for easy installation and removal) are all machined from 2014 T6 aluminium. All off the shelf headsets come complete with the Hed Doctor. Sealing is achieved through an adjustable taper ring cover and integrated rubber seal.The bearings also incorporate their own sealing, and being made from stainless steel to resist corrosion - a real advantage over a conventional steel bearing.
"High quality press fit 41mm bottom bracket bearing solution for 30mm crank axles."Key Features30mm axle compatable,High quality stainless bearings,designed to fit Press fit 41mm threadless bottom bracket shells,Suitable for road, mtb and fatbikes.Press Fit 41 30mm bottom bracket Tech Specs Fits 89.5, 92, 104.5, 107 and 121mm bottom bracket widths,Designed to suit cranks with a 30mm axle in a Press Fit 41mm bottom bracket shell,**NOTE**30mm PF41 bottom bracket does not use a threaded centre tube,Weight 77g.
Our direct shifter mounts are designed to help keep your handlebar setup looking neat and integrate better ergonomically with the rest of your controls Shifter mount adapters available for both Sram and Shimano Shifter mounts are designed to fit our Race, Tech and Tech 3 levers Shifter mounts are available in pairs or singles - for a single ring setup All shifter mounts are beautifully machined in-house from a solid billet of aluminium.
Fitted with high quality seals and bearings, our threaded bottom brackets are renowned for their durabilityKey FeaturesExternal bottom bracket designed for threaded bottom brackets,The machined aluminium cups hold either stainless steel cartridge bearings or ceramic bearings in stainless races,Custom Swiss made bearings are double sealed which gives a much greater life span than stock units,Cartridge bearings are replaceable,The unit is suitable for 68, 73, 83 and 100mm width bottom brackets,Designed to suit 24mm crank axles.Tech SpecsAll common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required),Available with replaceable stainless or ceramic bearings for less friction and greater durability,Designed to fit 24mm crank axles,Available for road, mtb, DH and Fatbikes,Free running labyryinth seal protects bearings and has less drag,Available in: black, silver, red, blue, purple and orange,Weight: 110g.
Our floating discs have been redesigned with a wider braking surface to enable them to be used as a replacement on many other braking systems in addition to our own.Key Features:Popular amongst both performance orientated riders and those just looking for something a little different,New design with wider braking surface to make them more compatible with other companies brakes,Custom steel braking surface riveted to an aluminium central carrier,Available in: 140, 160, 180, 183, 200, 203 and 205mm,Floating design deals with changes in temperature,Available in our six colour options,Weight 180mm: 146g.
Post mount calipersAll our calipers are now available in the 9.74 post mount style (except trials) the range of brackets can be used on the whole range to fit most mounts (note: there are some exceptions, and some brackets can be used for purposes that we have not stated to give certain rotor sizes. We have designed the brackets only for the purpose stated) All mounts are supplied with bolts for mounting to frame/fork.74mm Post mountHBSM20H - this mount allows international standard calipers to fit onto 74mm post mount forks, but it also requires a 20mm larger disc. NOTE: Will not work with most post mount Marzocchi forksInternational StandardWe offer two mounts for international standard fittings. HBIS20 - this mount lifts the caliper allowing you to fit a 20mm larger disc. HBIS40 - this mount lifts the caliper allowing you to fit a 40mm larger disc.CNC machined in Barnoldswick, EnglandMount A-Post Caliper to IS (F-160/R-140)Mount B-Post Caliper to IS (F-203/R-183)Mount C-Post Calipe to Post (F-203/R-203)Mount D-Post Caliper to Boxxer, pre-2010 (F-203)Mount E-Post Caliper to Fox 40 (F-203)Mount F-Post Caliper to IS (F-180/R-160)Mount G-Post Caliper IS (R-203)Mount H-Post Caliper to Post (F-183)Mount J-Post Caliper to IS (F-183)Mount K-Post Caliper to Post (R -PM 140-PM 160).
Our F20 Pedal is a high quality platform pedal available in all our coloursPedals feature a fully CNC machined platform out of 2014 T6 aluminium with anodised finish,The axle is made of high strength Cr-Mo, heat treated and plated,Each pedal uses a norglide bush and three cartridge bearings in a fully sealed chamber to give a long smooth life,Replaceable pins per pedal give excellent traction and grip. (Titanium pin option also available) 20 replaceable Hollow pins offer amazing grip,Pedal platform is CNC machined with a slight concave for stability,Pedals run on three cartridge bearings and a norglide bush for smooth long term durability,Available in: black, silver, gunsmoke, red, blue and purple,Weight: 390g per pair.
The District+ rear light is bright! Now that may sound like an obvious statement but until you've seen one of these in the dark you won't quite believe it.Key Features:135 (105 measured) lumens on maximum power.Choice of three static and three flashing modes.Supplied with a 2 cell ES Li-Ion battery or uses power from exsiting front light via splitter cable.QR band seatpost mount.2600mAh 2 cell ES battery which uses an intergrated battery life indicator so no more guessing.3 red Osram's high efficiency Oslon LEDs.270 degree visibility.15-200 hour burn time.
Genuine Hope bottom bracket installation tool.
The most versatile and serviceable hubs on the planet are now available with centre-lockKey Features:Specifically designed for road use with reduced drag ratchet mechanism.2 pawl ratchet with 44-point engagement (8 deg).Machined from forged 2014 T6 aluminium billet.Stainless Steel Bearings.Centre lock disc spline.Available in 135mm & 142mm widths.Available in 11 speed Shimano and Campagnolo.Aluminium or steel Freehub.Conversions available in QR and 12mm.Weight: 272g (32 hole 142mm).
Our hubs have proven their reputation for bullet proof quality time and time againKey Features4 Pawl Ratchet with 44 tooth engagement (8.2 deg),Sealed Stainless Steel cartridge bearings,Machined from forged 2014 T6 aluminium billet,Available in 135mm & 142mm widths,Standard 6 bolt disc fitting,Larger spoke flange to enable stiffer wheel builds,Unsurpassed reliability,Weight from 300g."The benchmark disc compatible rear hub"Pro 4 Rear Hub Tech SpecsSee Boost and 150 for other widths,Aluminium or steel freehub body options,Available in 24, 28, 32 and 36 hole drillings,Conversions available for QR, 10mm bolt in, 10mm, 12mm and 142x12mm thru axles,Supplied with freehubs to suit 10/11spd Shimano or Sram XD cassette,Colour Black, Silver, Red, Blue, Purple and Orange,Weight: QR - 311g, 142mm - 300g, XD.
CNC machined, ergonomic levers securely fixing your wheelsKey FeaturesLaser etched, anodized 2014 T6 aluminium,Available as singles or pairs,Stainless steel rods available in 100, 130, 135, 170 and 190mm,Available in Black, Silver, Red, Blue, Purple and Orange."Secure fixings for your wheels"Quick Release Tech SpecsDifferent lengths available to suit Road, MTB and Fatbikes,Colours: Black, Silver, Red, Blue, Purple and Orange,Material 2014 T6 Aluminium levers and Stainless Steel rods,Available in 100, 130, 135, 170 and 190mm lengths,Available as singles or pairs,Weights: Single from 55g// Pair from 119g.