Fixed SprocketsPrecision CNC machined Sprockets from heat treated Cr-Mo steel17T and larger are slotted to save weightSpecificationsMaterial CNC Cr-Mo,Chain Compatibility 1/8",Threads 1.37"x 24T Standard R/H,Colour Satin chrome or Black,Weight 35g (13T), 43g (14T), 54g (15T), 63g (16T), 64g (17T), 71g (18T), 83g (19T).
Fixed Sprocket LockringsPrecision CNC machined.,2 dog type.,L/H thread - 1.29"x24T,Weight: 7g,7075 Alloy in anodised Black, Blue, Red, Green, Gold or Purple.,Larger point of contact with hub for increased security.SpecificationsMaterial 7075 Alloy,Threads L/H thread - 1.29"x24T,Colour Anodised Black, Blue, Red, Green, Gold or Purple.,Weight 7g.Note: General Fixed sprocket check:For correct fixed use, the fixed sprocket should NEVER move on the hub when pedal force is applied in both directions.,i.e. if the sprocket moves, then something is wrong.,Continued use with a fixed sprocket that moves will result in damage to the hub..
DJD BD Sprocket 1/8", CNC Cr-mo - Fits Halo DJD BD/S.Drv Hubs, 23x1mm Thread, 1/8" for SSHalo DJD BushDriver Sprockets,Screw-on for Halo DJD hubs with Mini Drive only.,Suits DJD BD or DJD SupaDrive hubs.,1/2x1/8" Steel.,09, 10, 11, 13, 14 & 16T,Thread = 23x1mm.,RHD only..*Note : not compatible with Sealed Bearing Driver Hub*
All New Trail and Street tyre.Utilises 2 central rails (ridges) for reduced buzz on hard surfaces, but features drive ‘sleepers’ between the ‘rails’ to give traction on loose surfaces (Halo patent pending).Also features overlapping low profile studs to avoid lateral flex during hard cornering, and so give positive steering.Multi use pressures allow this one tyre to perform in almost all conditions both on road and off road.Built-in Puncture Protection System reduces flats.Directional, universal front or rear tread.knurled ground contact points.High quality lightweight carcass.Built-in Puncture Protection SystemBlack sidewall..
Trail and Street tyre.The legendary (and patented) all surface performance tyre;now in a size that will be great for the Big Boy wheel users... (2.2" air chamber is especially good for those running without suspension).Now with a new Revised tread (with lowered rails).Utilises two central rails for reduced buzz on hard surfaces, but features drive 'sleepers' between the 'rails' to give traction on loose surfaces (Halo patented). Also features overlapping low profile studs to avoid lateral flex during hard cornering, and so provide positive steering.Multi use pressures allow this one tyre to perform in almost all conditions... both on road and off road.Built-in Puncture Protection System reduces flats.,Directional, universal front or rear tread. ,knurled ground contact points.,High quality skinwall carcass.,Built-in Puncture Protection System,Black.,Black/Skinwall.,Black/Whitewall.,29" x 2.2" (700 x 56C).,Approx Weight: 890g.
Fat Foot SprocketAvoid damaged freehubs with these precision CNC machined Cr-mo HG style sprockets with an offset 7mm wide foot to avoid digging into softer alloy HG type splined freehub bodiesCNC Cr-Mo sprocket 1/8" teeth.,7mm wide HG type spline foot.,Available in 12 to 20T sizes,Chrome Plated.
MX Hub Axle Bolts, Replacement Cro-Mo Hub bolts with Alloy Cap set for MXF/MXRC/MXRC-E BMX HubsCro-mo bolts with Alloy CapsMale boltsBlack, Gold or Red.
MX Hub Axle Bolts, Replacement Cro-Mo Hub bolts with Cro-Moly Washers set for MXF/MXR BMX HubsCro-mo bolts with Cro-Mo Washers.Male bolts.
Top quality screw-on Freewheels for the discerning single speed rider that wants super quick pick-up...High strength Cr-Mo body and cog.,CNC 3/32" Cr-Mo teeth (can accept 3/32 or 1/8" chains).,6 pawls system.,72 point pick-up.,1.37"x 24T Standard R/H threaded.,Body features "EZ-off" 4 dog tool removal slots. ,Black Oxide finished..SpecificationsMaterial Cr-Mo,Chain Compatibility 3/32,Threads 1.37 inch x 24 tpi,Colour Black,Weight 164g (16T), 172g (17T), 176g (18T).
1mm thick, high quality butyl rubber inner tubes with standard presta type valves.Suitable for most Fat bike tyre applications.SpecificationsCompound Butyl rubber,Size 26 x 4.0" (x1.0mm) - presta valve,Weight 530g.
Expert level BMX race tyre.Affordable folding tyre with anti puncture (good for race tracks where there may be the chance of punctures).Ideal for all normal racers who just need one tyre to use.Features:55D Rubber Compound.,60 Tpi,Kevlar folding bead.,1mm anti-puncture..Colours:Black Skinwall and option for White Skinwall..Sizes:20 x 1.60,20 x 1.75,20 x 1.95.Weights:20 x 1.60: Black 268g, Whitewall 295g.,20 x 1.75: Black 305g, Whitewall 310g.,20 x 1.95: Black 325g, Whitewall 345g.. Recommended inflation: Min 45psi - Max 75psi.
Short HG type Driver for Halo MXRC hubsSupa-Drive system, Alloy HG carrier with Cro-mo pawl and driver unit.Bush or bearing optionsTechnical InfomationThe lightweight bushed driver system was originally implemented into the MXRC hub to minimise the weight of the rear wheel for racing. However, several riders found the bush system was susceptible to excessive wear when compared to a bearing system, therefore, we have introduced the slightly heavier (15g) cartridge bearing freehub. The newer style complete cartridge bearing freehub is retro-compatible with the original MXRC rear hub with a bushed driver, but, due to the altered internal spacing of the sealed bearings, you MUST USE the specially shortened thread HG type lockring (supplied with the sealed bearing freehub).Caution: DO NOT USE a standard lockring on the newer sealed bearing freehub, as it will not clear the outer bearing.
Halo have developed a new family of BMX Racing tyres including these superlight MXR-SLR folding versions.Soft, grippy 55D rubber compound is specced in 20" x 1.60, 1.75 or 1.95 sizes.MXR-SLR tyre is a pure-bred BMX race tyre.Features:Fast rolling 120Tpi casing.,Soft, grippy 55D rubber Compound.,Superlight folding Kevlar bead..Colour: Black Skinwall..Sizes:20 x 1.60 ,20 x 1.75,20 x 1.95.Weights:20 x 1.60: 231g,20 x 1.75: 240g,20 x 1.95: 297g.Recommended inflation: Min 45psi - Max 75psi.
Precision CNC machined alloy axle nuts and washer sets in lots of bling bling colours..., Alloy axle nuts and washer sets in M9 or M10 (mm).Lots of bling colours.Precision CNC machined from 6061 Alloy.Red, Blue, Black, Gold or Purple anodised.Sold in pairs..
DJD Supa Drive DriverSize: 1/8",CNC Cr-mo,Fits Halo DJD SupaDrive Hub ONLY. ,Sprocket Not Included.
Special pads to suit Carbaura Carbon road rims3 types availableCampagnolo pre 2012 ,Campagnolo 2012 and onwards,Shimano.SpecificationsColour Grey.
Holds aero or bladed spokes to prevent twisting when building or truing a wheel
Optional extra bolted axles for Halo Fat bike hubs.Front and rear options..
If a wheel slippage problem is something that you need to kill-off, then Halo's all new Butch-washers with their sharp cut teeth, force multiplying design and butch, non-bending, heat treated, 4mm thick steel bodies are the 'no messin' about' answer for you..Halo Butch Design Functions:Force multiplier design increases the force applied by 30%.,(3mm grip face Vs 4.5mm nut face.),Smooth Nut face reduces tightening torque friction. ,Sharp cut teeth 'bite' into any surface to provide maximum grip..Tech:4mm thick hardened Cr-Mo steel body (resists bending.) ,10.2mm clearance hole (fits 3/8" and 10mm axles) ,20mm outer diameter grip-face (fits into most dropouts.) ,Black Oxide finish (suits most applications).
Spin Doctor 6D Axle Kit, Rear - M10 Bolt type axle kit for SD6D Hub, Inc. Internal alloy axle