MXR Rear alloy axle kit with 3/8" Female bolts.MXR Rear Cro-Moly 14mm hollow axle kit.
Halo DJD BD Axle kit:10mmx135mm Female threaded axle.Halo 10mm female bolt type alloy hollow axle(bolts not included) with 6mm hex broach in centre of axle.,Fits M10 x 1.5mm bolts.,Weight: 46g..
DJD BD Internal Drive Ring, Rear - Replacement Internal Drive ring for DJD BD hubs ONLYDJD Bush Drive ring,Internal Drive ring,30T.
This kit allows the 6D Road Disc front hub to fit with both 12 and 15mm (x100mm) T-axle forks.Simple to install (no tools required).Note: End caps and tube axle for this system are not "captive". Please hold the axle conversion parts "safe" to avoid losing axle components when front wheel is removed.SpecificationsMaterial 7075 CNC machined alloy,Colour Black,Weight 12mm conversion 42g, 15mm conversion 26g.
High quality skewers with internal cam mechanism.Cr-mo chrome plated shaftsAlloy handles with laser etched logosSpecificationsMaterial Cr-mo chrome plated shafts, Alloy handles,Colour Black,Weight Front 50g, Rear 55g, Pair 105g.
SD Pro/XCD Internal Drive Ring, Rear - Replacement Internal Drive ring for SD Pro/XCD hubs
Wide Boy 20mm BMX Adaptor., 20mm x100mm adaptor SET for Wide Boy to use with BMX - CNC Alloy
Great value road skewer external cam mechanismCr-mo shaftsAlloy handle with laser etched logoWeight:Front 55g,Rear 60g,Pair 115g.
A modern take on a timeless classic.Built with sealed cartridge bearings and our 6D drive system.The ultra-dependable drive system of this hub uses 6 independently sprung, double tipped, reversed pawls; giving 12 point simultaneous engagement on a 30 click cro-mo drive ring32H forged and CNC alloy hub with a classic 'five-star' flange, built with sealed cartridge bearings and finished in polished silver. SpecificationsMaterial 7075 CNC body,Drillings 32H,Axle QR with alloy axle,Spoke Hole Circle Diameter (PCD) 58mm both sides,spoke hole size (diameter) 2.5mm,OLD Front : 100mm / Rear : 130mm,Colour High Polished Silver,Weight Front : 135g / Rear : 290g,Freehub 11spd Shimano/SRAM or Campag (rear).
Evaura 6D 700c WheelsLightweight 24mm wide clincher with a 22mm low profile section, laced with black double butted spokes and red alloy nipples.20H radial front, 24H (2:1 16/8E) rear spoke lacing for enhanced lateral rigidity.11spd Shimano/Sram or Campagnolo compatible. Spacers available to convert to 9 or 10spd.Specifications:T10 super alloy sleeved rim with CNC brake surface.,24mm wide x 22mm deep.,Tubeless-ready, supplied pre-taped.,Black stainless steel double butted spokes.,Front hub - 20H straight pull, sealed bearings.,Rear hub - 24H (2:1) 2x lacing, sealed bearings, 6 pawl, 30t engagement..Weights:Front - 668g,Rear - 898g,Pair - 1566g.Colours:Available in Black anodised or White powder coated.
Traverse, climb and descend. Our Chaos Enduro and DH race wheels are at home on the slopes of downhill tracks, climb comfortably between stages at any Enduro race and are now tubeless compatible.Chaos wheels utilise our new and improved instantaneous 120 point pickup MT Supadrive, MT Supadrive DH and MT Front hubs, with sealed bearings and wide spaced flanges for increased stiffness and durability.The Chaos Enduro wheelset is also available with the option of a MT 6Drive, for a quieter 30 click drive.Included FittingsFront Standard: 15mm x 100 thru, 9mm x 100 QR,Front Boost: 15×110 thru,Rear Standard: 12mmx142 thru, 9mm x 135 QR,Rear Boost: 12mm x 148 thru,Rear Super Boost: 12mm x 157 thru,.SpecificationsSpokes: Black double butted stainless spokes,Nipples: Black ED coated brass nipples,Rim Depth: 20mm,Internal Width: 22.5mm,External Width: 28mm,Front Hub Spacing: 100mm or 110mm Boost versions,Rear spacing: 135/142mm, 148mm Boost and DH150mm versions,Drillings: 32H,Disc Mount: IS 6-Bolt,Recommended Tyre size: 2- 2.5”.
The MXR Series of hubs have been built for BMX racing, and have won some of the most prestigious events around the globe.Wide spoke flanges make the MXR series build into some of the strongest and stiffest wheels in the market whilst sealed cartridge bearings ensure longevity.At a mere 155g our MXR Front hub is superlight for racing and yet strong enough for freestyle.The forged alloy body and 15mm hollow alloy axle optimise weight and strength, while minimising flex.There are two stock bolt configurations:28H or 32H for Race (with alloy capped Cr-Mo Allen bolts), ,36H for Dirt/Street/Park (with Cr-Mo Hex bolts),.(Note: the 2 bolt options can be purchased and interchanged, if using pegs we recommend the Cro-Mo Hex bolts).
Our MT Front Boost Disc Adaptor kit turns your standard MT front hub into a Boost compatible configuration (110mm).The kit consists of: Two extension end cones, A 5mm interlocking disc rotor spacer, Extra-long disc rotor bolts.
Adapter kits to change Halo 6D Road Rear Disc hubs from 130mm OLD to 135mm OLD.Option A. Use to fit a 135mm Disc frame with standard 130mm spaced cranks.(Fits most crankset spacings).Select the required Freehub option.,Select your choice of suitable disc only or universal rim.,Select the +2.5mm symmetrical adaptor kit. (LH 2.5mm and RH 2.5mm cones). ,Mount the adapter with XL bolts (supplied).,Mount an IS disc rotor..Option B. Use to fit a 135mm Disc frame with 135mm specific spaced cranks.(Use with SRAM road 135mm cranksets with 2.5mm off-set).Select the required Freehub option.,Select your choice of suitable disc only or universal rim.,Select the +5mm asymmetrical adaptor kit. (LH 1 x 5mm cone, RH use Std cone)*.,Mount the adapter with XL bolts (supplied).,Mount an IS disc rotor..Note: : this option requires the wheel to be re-dished 2.5mm towards the non-drive side to ensure more equalised spoke tensionNote:In some circumstances, if using an MTB specific 10spd cassette in conjunction with a 135mm frame and a 130mm crank set-up (using the 2.5mm symmetric adaptor set) it is possible that you may encounter running difficulties in large sprocket to large chainwheel. This is due to a difference in cassette offset between Shimano MTB and Road 10spd sprockets. Fitting a Road-specific cassette will often solve the issue, or alternatively, switch to the asymmetric +5mm adaptor set and re-dish the wheel.
Box section low-profile lightweight road race rims with stainless eyelets.Our brand new Retro rims resemble European high quality rims from the 1970s and 80s but are made using modern extrusions and materials to offer high performance and low weight.The perfect option to finish off your retro classic race machine that warms your heart on a Sunday morning.(or anytime when you take a sneaky peak.)Features:Double wall box section.Heat Treated T10 extruded alloy.Close-pinned joint.Polished smooth brakewall.Stainless Steel single eyelets.19.6mm Wide21mm deep.ERD: 594Weight: 435g.
Lightweight racing hub with 6 pawl drive system.Smooth, quiet and reliable power transfer.The ultra-dependable drive system of this hub uses 6 reversed pawls, all independently sprung and featuring double tips, giving 12 engagement points on a 30 click Cr-Mo freehub driver.6D - Halo 6 Drive System:The ultra-dependable 6-Drive system: Smooth, quiet and reliable power transfer..6 reversed pawls, all independently sprung and featuring double tips, giving 12 point simultaneous engagement on a 30 click Cr-Mo drive ring powering the optional Cr-Mo or 7075chard alloy splined freehub body.This results in an extremely positive and reliable drive system.The uncluttered freehub that a reversed pawl system provides, allows a cartridge bearing to be used directly under the freehub drive ring (rather than an offset position that is commonly used in conventional pawl systems that cram the pawl mechanism into the relatively small diameter of the freehub itself.) The resultant reduction in offset torque transfer from the freehub reduces leverage effect on the axle and ultimately increases bearing durability. SpecificationsMaterial Forged and CNC machined,Drillings J-Bend, 24H (offset 16/8) or 32H (16/16),Bearings 2 x 6902, 2 x 15268,Axle 15mm alloy tube for 10mm QR,Spacing 130mm,Freehub Shimano/SRAM or Campag,Freehub Body 11 speed, Shimano or Campag,Drive System 6 Pawl, 30T engagement,Spoke Hole Circle Diameter (PCD) Left: 40mm, Right: 58mm,spoke hole size (diameter) 2.5mm,Centre to Flange Left: 41mm, Right: 15mm,OLD 130mm,Model Ref SM6S,Colour Black, Red or White with Red axle caps,Weight 275g.
Wide Boy 20mm adaptor cups:20mm x 110mm adaptor SET for Wide Boy front hub..CNC Alloy. Black anodised. Pair..Wide Boy 15mm adaptor cups:15mm x 100mm adaptor SET for Wide Boy front hub..2 spacers and 2 inserts. CNC Alloy, Black anodised..Wide Boy QR Cones:Spare Adaptor cones for QR Axle. Blk. Pr..9x100mm spaced QR fitting. Blk CNC alloy caps. Pr..(Note - these QR cones are replacement spares - as the Wide Boy hub includes these items when purchased new)..Wide Boy 20mm BMX:20mm x 100mm adaptor SET to use with BMX front forks..