Fox Suspension DHX2 Factory 2 Position Adjust ShockReady for all-day epics on your favourite local trails, this mountain bike (MTB) rear shock features a coil spring ready design, an updated chassis and damper plus a high-flow main piston for precise and controlled handling on the most demanding of terrains. Part of Fox Suspension's prestigious Factory Series, this model is kitted out with proven technologies and is designed to exceed the demands of Factory-level riders.Adjustable Coil Spring Rear ShockBenefitting from Fox Suspension's finest technologies for modern mountain bike riding, this rear shock is equipped with a coil spring ready design and an updated damper. The updated X2 damper maintains a twin tube architecture, employing a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension also added its patented Variable Valve Control (VVC) technology to the high-speed rebound (HSR) circuit, which allows for easy, external fine-tuning of your suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on high-speed compression (HSC) and high-speed rebound (HSR). This allows you to make consistent adjustments between their front and rear suspension. Nothing sticks to the ground quite like a coil shock. With an entirely updated chassis and damper, enhanced tunability, smoother action, and a MCU bumper for progressivity and end-stroke control - the Fox Suspension DHX2 Factory 2Pos-Adj Shock is ready to race straight out of the gate.Please note: A coil spring is not included with this model but is available to purchase separately.Features: Shaft Coating: Chromoly (CrMo) Steel Use: MTB Spring Type: Coil spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Detents on Spring Collar: Yes Spring Included: No, available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated Chassis: The outer body on the DHX2 features steel construction with finned inner tubes for reduced hysteresis. DHX2 features an updated low-friction hard chrome coating on the shaft with new seals designed to pair perfectly to the new shaft coating, reducing frictions and increasing seal life. Updated Damper: The updated X2 damper maintains a twin tube architecture, emplying a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension added its patented VVC technology to the HSR circuit. VVC is a proprietary variable valve technology that allows for easy, external fine-tuning of suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on HSC and HSR. This allows the rider to make consistent adjustments between front and rear suspension. MCU Bumper: The updated MCU bumper is designed to allow for supple beginning and mid-stroke, seamlessly transitioning to a bottomless end-stroke. Independent Firm Mode Circuit: This version's 2-position switch operates on an independent circuit, resulting in a firmer lockout. Revised Spring Changes: The coil-sprung DHX2 now uses a full spring collar, held in place with a C-clip, and a new preload collar with indexed notches to allow for light preload without the collar backing off.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension DHX2 Factory 2 Position Adjust ShockReady for all-day epics on your favourite local trails, this mountain bike (MTB) rear shock features a coil spring ready design, an updated chassis and damper plus a high-flow main piston for precise and controlled handling on the most demanding of terrains. Part of Fox Suspension's prestigious Factory Series, this model is kitted out with proven technologies and is designed to exceed the demands of Factory-level riders.Adjustable Coil Spring Rear ShockBenefitting from Fox Suspension's finest technologies for modern mountain bike riding, this rear shock is equipped with a coil spring ready design and an updated damper. The updated X2 damper maintains a twin tube architecture, employing a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension also added its patented Variable Valve Control (VVC) technology to the high-speed rebound (HSR) circuit, which allows for easy, external fine-tuning of your suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on high-speed compression (HSC) and high-speed rebound (HSR). This allows you to make consistent adjustments between their front and rear suspension. Nothing sticks to the ground quite like a coil shock. With an entirely updated chassis and damper, enhanced tunability, smoother action, and a MCU bumper for progressivity and end-stroke control - the Fox Suspension DHX2 Factory 2Pos-Adj Shock is ready to race straight out of the gate.Please note: A coil spring is not included with this model but is available to purchase separately.Features: Shaft Coating: Chromoly (CrMo) Steel Use: MTB Spring Type: Coil spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Detents on Spring Collar: Yes Spring Included: No, available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated Chassis: The outer body on the DHX2 features steel construction with finned inner tubes for reduced hysteresis. DHX2 features an updated low-friction hard chrome coating on the shaft with new seals designed to pair perfectly to the new shaft coating, reducing frictions and increasing seal life. Updated Damper: The updated X2 damper maintains a twin tube architecture, emplying a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension added its patented VVC technology to the HSR circuit. VVC is a proprietary variable valve technology that allows for easy, external fine-tuning of suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on HSC and HSR. This allows the rider to make consistent adjustments between front and rear suspension. MCU Bumper: The updated MCU bumper is designed to allow for supple beginning and mid-stroke, seamlessly transitioning to a bottomless end-stroke. Independent Firm Mode Circuit: This version's 2-position switch operates on an independent circuit, resulting in a firmer lockout. Revised Spring Changes: The coil-sprung DHX2 now uses a full spring collar, held in place with a C-clip, and a new preload collar with indexed notches to allow for light preload without the collar backing off.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension DHX2 Factory 2 Position Adjust ShockReady for all-day epics on your favourite local trails, this mountain bike (MTB) rear shock features a coil spring ready design, an updated chassis and damper plus a high-flow main piston for precise and controlled handling on the most demanding of terrains. Part of Fox Suspension's prestigious Factory Series, this model is kitted out with proven technologies and is designed to exceed the demands of Factory-level riders.Adjustable Coil Spring Rear ShockBenefitting from Fox Suspension's finest technologies for modern mountain bike riding, this rear shock is equipped with a coil spring ready design and an updated damper. The updated X2 damper maintains a twin tube architecture, employing a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension also added its patented Variable Valve Control (VVC) technology to the high-speed rebound (HSR) circuit, which allows for easy, external fine-tuning of your suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on high-speed compression (HSC) and high-speed rebound (HSR). This allows you to make consistent adjustments between their front and rear suspension. Nothing sticks to the ground quite like a coil shock. With an entirely updated chassis and damper, enhanced tunability, smoother action, and a MCU bumper for progressivity and end-stroke control - the Fox Suspension DHX2 Factory 2Pos-Adj Shock is ready to race straight out of the gate.Please note: A coil spring is not included with this model but is available to purchase separately.Features: Shaft Coating: Chromoly (CrMo) Steel Use: MTB Spring Type: Coil spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Detents on Spring Collar: Yes Spring Included: No, available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated Chassis: The outer body on the DHX2 features steel construction with finned inner tubes for reduced hysteresis. DHX2 features an updated low-friction hard chrome coating on the shaft with new seals designed to pair perfectly to the new shaft coating, reducing frictions and increasing seal life. Updated Damper: The updated X2 damper maintains a twin tube architecture, emplying a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension added its patented VVC technology to the HSR circuit. VVC is a proprietary variable valve technology that allows for easy, external fine-tuning of suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on HSC and HSR. This allows the rider to make consistent adjustments between front and rear suspension. MCU Bumper: The updated MCU bumper is designed to allow for supple beginning and mid-stroke, seamlessly transitioning to a bottomless end-stroke. Independent Firm Mode Circuit: This version's 2-position switch operates on an independent circuit, resulting in a firmer lockout. Revised Spring Changes: The coil-sprung DHX2 now uses a full spring collar, held in place with a C-clip, and a new preload collar with indexed notches to allow for light preload without the collar backing off.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension DHX2 Factory 2 Position Adjust ShockReady for all-day epics on your favourite local trails, this mountain bike (MTB) rear shock features a coil spring ready design, an updated chassis and damper plus a high-flow main piston for precise and controlled handling on the most demanding of terrains. Part of Fox Suspension's prestigious Factory Series, this model is kitted out with proven technologies and is designed to exceed the demands of Factory-level riders.Adjustable Coil Spring Rear ShockBenefitting from Fox Suspension's finest technologies for modern mountain bike riding, this rear shock is equipped with a coil spring ready design and an updated damper. The updated X2 damper maintains a twin tube architecture, employing a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension also added its patented Variable Valve Control (VVC) technology to the high-speed rebound (HSR) circuit, which allows for easy, external fine-tuning of your suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on high-speed compression (HSC) and high-speed rebound (HSR). This allows you to make consistent adjustments between their front and rear suspension. Nothing sticks to the ground quite like a coil shock. With an entirely updated chassis and damper, enhanced tunability, smoother action, and a MCU bumper for progressivity and end-stroke control - the Fox Suspension DHX2 Factory 2Pos-Adj Shock is ready to race straight out of the gate.Please note: A coil spring is not included with this model but is available to purchase separately.Features: Shaft Coating: Chromoly (CrMo) Steel Use: MTB Spring Type: Coil spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Detents on Spring Collar: Yes Spring Included: No, available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated Chassis: The outer body on the DHX2 features steel construction with finned inner tubes for reduced hysteresis. DHX2 features an updated low-friction hard chrome coating on the shaft with new seals designed to pair perfectly to the new shaft coating, reducing frictions and increasing seal life. Updated Damper: The updated X2 damper maintains a twin tube architecture, emplying a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension added its patented VVC technology to the HSR circuit. VVC is a proprietary variable valve technology that allows for easy, external fine-tuning of suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on HSC and HSR. This allows the rider to make consistent adjustments between front and rear suspension. MCU Bumper: The updated MCU bumper is designed to allow for supple beginning and mid-stroke, seamlessly transitioning to a bottomless end-stroke. Independent Firm Mode Circuit: This version's 2-position switch operates on an independent circuit, resulting in a firmer lockout. Revised Spring Changes: The coil-sprung DHX2 now uses a full spring collar, held in place with a C-clip, and a new preload collar with indexed notches to allow for light preload without the collar backing off.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The all-new 36. The new enduro fork standard is anything but standard. With all new design inside-and-out, plus an unmatched combination of ride quality, tunability, stiffness, weight, and alignment - we took the award-winning, EWS favorite and made it even better. Features NEW chassis. NEW air/oil channels. NEW lower leg design, highly optimized for maximum stiffness to weight. NEW arch shape offers improved head tube clearance with shorter rakes. Updated GRIP2 damper now with dual VVC (Variable Valve Control) on HSC and HSR circuits. Matching 8-click HSC and HSR adjustment on Grip2 forks and X2 shocks. Increased crown diameter to match modern frame shape profiles. Updated EVOL air spring. Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. Specification Damper: GRIP2 w/ dual VVC (Variable Valve Control). Travel: 140 - 180mm. Offset Options: 37mm. 44mm. 51mm. Wheel Size: 27.5 . Axle: 15QR x 110mm Boost. Steerer: 1.5 Tapered. Colour: Gloss Black. Upper leg finish: Genuine Kashima Coat.
The all-new 36. The new enduro fork standard is anything but standard. With all new design inside-and-out, plus an unmatched combination of ride quality, tunability, stiffness, weight, and alignment - we took the award-winning, EWS favorite and made it even better. Features NEW chassis. NEW air/oil channels. NEW lower leg design, highly optimized for maximum stiffness to weight. NEW arch shape offers improved head tube clearance with shorter rakes. Updated GRIP2 damper now with dual VVC (Variable Valve Control) on HSC and HSR circuits. Matching 8-click HSC and HSR adjustment on Grip2 forks and X2 shocks. Increased crown diameter to match modern frame shape profiles. Updated EVOL air spring. Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. Specification Damper: GRIP2 w/ dual VVC (Variable Valve Control). Travel: 140 - 180mm. Offset Options: 37mm. 44mm. 51mm. Wheel Size: 27.5 . Axle: 15QR x 110mm Boost. Steerer: 1.5 Tapered. Colour: Gloss Black. Upper leg finish: Genuine Kashima Coat.
Part of Fox Suspension's renowned Factory Series, this mountain bike (MTB) rear shock is equipped with a stunning genuine Kashima coating that offers slippery smooth performance, increased durability on the more demanding of terrains, and also complements your ride with its eye-catching finish. Adjustable Rear Shock with Variable Valve Control (VVC) Coming feature-packed with a design that's intended to exceed the demands of Fox Suspension's Factory-level riders, this rear shock is kitted out with a two-position lever. Developed for ease of use, its lever makes it simple to switch between open and firm modes to suit the terrain or course conditions on your ride. Another highlight is its range of adjustment features that include high and low-speed compression as well as high and low-speed rebound. This version is also equipped with Variable Valve Control (VVC) for improved high-speed rebound tunability. As a result, you'll be able to dial in your ideal settings to match your riding style and enjoy more rider-tuned rear suspension performance. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated Damper: The Float X2's 4-way adjustable, twin-tube architecture now features patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. Updated compression ratios and a MCU bumper deliver improved progressivity and bottom-out control with fewer volume spacers. Independent Firm Mode Circuit: A 2-position switch operates on an independent circuit, providing a notably firmer lockout than before, allowing for efficient climbing and wide-open descending. Updated Chassis: Float X2's entirely revised chassis features an ultra-low friction hard chrome damper shaft, updated low-friction bushings and seals, and genuine Kashima coated outer body for smoother performance than ever before. High-flow main piston. Improved bearing ratio for metric sizes. Increased control and decreased harshness via linear damping. Reduced length reservoir for better fit on more frames. Finned inner body for improved structural rigidity and reduced hysteresis. Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks. Updated compression ratios, 300psi max.
Fox Suspension Float X2 Factory 2 Position Adjust ShockFeaturing an award-winning and gravity-defying design, this mountain bike (MTB) rear shock holds nothing back, especially not you as you dominate on your favourite local trails. Part of Fox Suspension's renowned Factory Series, this model is equipped with a stunning genuine Kashima coating that offers slippery smooth performance, increased durability on the more demanding of terrains, and also complements your ride with its eye-catching finish. Adjustable Rear Shock with Variable Valve Control (VVC)Coming feature-packed with a design that's intended to exceed the demands of Fox Suspension's Factory-level riders, this rear shock is kitted out with a two-position lever. Developed for ease of use, its lever makes it simple to switch between open and firm modes to suit the terrain or course conditions on your ride. Another highlight is its range of adjustment features that include high and low speed compression as well as high and low speed rebound. This version is also equipped with Variable Valve Control (VVC) for improved high-speed rebound tunability. As a result, you'll be able to dial in your ideal settings to match your riding style and enjoy more rider-tuned rear suspension performance. Features: Finish: Genuine Kashima coating Use: MTB Spring Type: Air spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Max PSI: 300psiTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated Damper: The Float X2's 4-way adjustable, twin-tube architecture now features patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. Updated compression ratios and a MCU bumper deliver improved progressivity and bottom out control with fewer volume spacers. Independent Firm Mode Circuit: A 2-position switch operates on an independent circuit, providing a notably firmer lockout than before, allowing for efficient climbing and wide-open descending. Updated Chassis: Float X2's entirely revised chassis features an ultra-low friction hard chrome damper shaft, updated low-friction bushings and seals, and genuine Kashima coated outer body for smoother performance than ever before. High-flow main piston. Improved bearing ratio for metric sizes. Increased control and decreased harshness via linear damping. Reduced length reservoir for better fit on more frames. Finned inner body for improved structural rigidity and reduced hysteresis. Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks. Updated compression ratios, 300psi max.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Prepared for everything from backcountry adventures to day-long epics on your favourite mountain bike (MTB) trails, this suspension fork is engineered for the demands of modern trail riding. It's part of Fox Suspension's renowned Factory Series, which means that it comes feature-packed and is designed to exceed the demands of Factory-level riders. Another highlight is its genuine Kashima coating on its upper tubes that provides slippery smooth and ultra-durable performance as you carve your way around the mountain. Boasting a wide range of adjustments from its Float EVOL air spring and GRIP2 damper with dual Variable Valve Control (VVC), this model makes it simple to dial in your ideal settings for smooth shock absorption and control on your ride. This version of the FOX 36 receives an update in the form of an updated crown with an revised design and engineering for more steerer tube overlap improving durability and maintaining stiffness while dropping 20 grams. MTB Fork with Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. GRIP2 Damper Fox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the updated 36, 38, and 40 models are designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.
Prepared for everything from backcountry adventures to day-long epics on your favourite mountain bike (MTB) trails, this suspension fork is engineered for the demands of modern trail riding. It's part of Fox Suspension's renowned Factory Series, which means that it comes feature-packed and is designed to exceed the demands of Factory-level riders. Another highlight is its genuine Kashima coating on its upper tubes that provides slippery smooth and ultra-durable performance as you carve your way around the mountain. Boasting a wide range of adjustments from its Float EVOL air spring and GRIP2 damper with dual Variable Valve Control (VVC), this model makes it simple to dial in your ideal settings for smooth shock absorption and control on your ride. MTB Fork with Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. GRIP2 Damper Fox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: The arch design of the updated 36, 38, and 40 models are designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's updated arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.
Fox Suspension 36 Float Factory Grip2 Boost Fork (2023)Boasting the best features and technologies that Fox has to offer, the race-proven 36 Float Factory Grip2 Boost Fork will enable you to dominate the toughest trails on your all mountain bike (MTB).Prepared for everything from backcountry adventures to day-long epics on your favourite mountain bike (MTB) trails, this suspension fork is engineered for the demands of modern all mountain riding. It's part of Fox Suspension's renowned Factory Series, which means that it comes feature-packed and is designed to exceed the demands of Factory-level riders. Boasting a wide range of adjustments from its Float EVOL air spring and GRIP2 damper with dual Variable Valve Control (VVC), this model makes it simple to dial in your ideal settings for smooth shock absorption and control on your ride.Fox Suspension Factory Series"Factory" says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. This version of the FOX 36 also receives an update in the form of an updated crown with an revised design and engineering for more steerer tube overlap improving durability and maintaining stiffness while dropping 20 grams.MTB Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.GRIP2 DamperFox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork.Features: Steerer Tube Material: Aluminium Crown Material: Aluminium Stanchion Tube Material: Aluminium Lower Tube Material: Magnesium Upper Leg Finish: Genuine Kashima Coat Use: All Mountain, Enduro Air Spring: Float EVOL Damper: GRIP2 with dual VVC (Variable Valve Control) Adjustment: High and low-speed compression, high and low-speed rebound, air pressure adjusts Steerer: 1 1/8-1.5" tapered Axle Type: 15 x 110mm Boost Brake Mount: Disc PM 7" (180mm direct mount) Stanchion Tube Diameter: 36mmOffset: 44mm Remote Operated: No Lever Operated: Yes Lockout: No Wheel Size: Multiple options available Floating Axle Included: Yes Mudguard mounts: Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment (sold separately)Technologies:Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicksFloating Axle: Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The updated 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your rideLower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travelBleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsivenessLower Leg Arch: The arch design of the updated 36, 38, and 40 models are designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's updated arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Factory Grip2 Boost Fork (2022)Designed for all-mountain and enduro racing, this Fork from Fox Suspension combines quality with lightweight stiffness for unrivalled durability. It features a GRIP damper with dual variable valve control and a Float EVOL air spring so you can adjust pressure and speed compression with ease. This fork also benefits from a Kashima coating for enhanced durability and long-lasting performance when tackling tough trails. Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat.Features: Steerer Tube Material: Aluminium Crown Material: Aluminium Stanchion Tube Material: Aluminium Lower Tube Material: Magnesium Upper Leg Finish: Genuine Kashima Coat Use: All Mountain, Enduro Air Spring: Float EVOL Damper: GRIP2 with dual VVC (Variable Valve Control) Adjustment: High and low-speed compression, high and low-speed rebound, air pressure adjusts Steerer: 1 1/8-1.5" tapered Axle Type: 15 x 110mm Boost Brake Mount: Disc PM 7" (180mm direct mount) Stanchion Tube Diameter: 36mmOffset: 44mm Remote Operated: No Lever Operated: Yes Lockout: No Wheel Size: Multiple options available Floating Axle Included: Yes Mudguard mounts: Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment (sold separately)Technologies:Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicksFloating Axle: Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The updated 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your rideLower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travelBleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsivenessLower Leg Arch: The arch design of the updated 36, 38, and 40 models are designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's updated arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension DHX2 Factory 2-Position Adjust ShockFeaturing a coil spring ready design, an updated chassis and damper plus a high-flow main piston for precise and controlled handling, this trail-ready rear shock is well-equipped for the most demanding of terrain conditions. Part of Fox Suspension's prestigious Factory Series, this model is kitted out with proven technologies and is designed to exceed the demands of Factory-level riders.Adjustable Coil Spring Rear ShockBenefitting from Fox Suspension's finest technologies for modern mountain bike riding, this rear shock is equipped with a coil spring ready design and an updated damper. The updated X2 damper maintains a twin tube architecture, employing a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension also added its patented Variable Valve Control (VVC) technology to the high-speed rebound (HSR) circuit, which allows for easy, external fine-tuning of your suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on high-speed compression (HSC) and high-speed rebound (HSR). This allows you to make consistent adjustments between their front and rear suspension. Nothing sticks to the ground quite like a coil shock. With an entirely updated chassis and damper, enhanced tunability, smoother action, and a MCU bumper for progressivity and end-stroke control - the Fox Suspension DHX2 Factory 2Pos-Adj Shock is ready to race straight out of the gate.Please note: A coil spring is not included with this model but is available to purchase separately.Features: Shaft Coating: Chromoly (CrMo) Steel Use: MTB Spring Type: Coil spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Detents on Spring Collar: Yes Spring Included: No, available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated Chassis: The outer body on the DHX2 features steel construction with finned inner tubes for reduced hysteresis. DHX2 features an updated low-friction hard chrome coating on the shaft with new seals designed to pair perfectly to the new shaft coating, reducing frictions and increasing seal life. Updated Damper: The updated X2 damper maintains a twin tube architecture, emplying a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension added its patented VVC technology to the HSR circuit. VVC is a proprietary variable valve technology that allows for easy, external fine-tuning of suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on HSC and HSR. This allows the rider to make consistent adjustments between front and rear suspension. MCU Bumper: The updated MCU bumper is designed to allow for supple beginning and mid-stroke, seamlessly transitioning to a bottomless end-stroke. Independent Firm Mode Circuit: This version's 2-position switch operates on an independent circuit, resulting in a firmer lockout. Revised Spring Changes: The coil-sprung DHX2 now uses a full spring collar, held in place with a C-clip, and a new preload collar with indexed notches to allow for light preload without the collar backing off.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension DHX2 Factory 2 Position Adjust ShockReady for all-day epics on your favourite local trails, this mountain bike (MTB) rear shock features a coil spring ready design, an updated chassis and damper plus a high-flow main piston for precise and controlled handling on the most demanding of terrains. Part of Fox Suspension's prestigious Factory Series, this model is kitted out with proven technologies and is designed to exceed the demands of Factory-level riders.Adjustable Coil Spring Rear ShockBenefitting from Fox Suspension's finest technologies for modern mountain bike riding, this rear shock is equipped with a coil spring ready design and an updated damper. The updated X2 damper maintains a twin tube architecture, employing a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension also added its patented Variable Valve Control (VVC) technology to the high-speed rebound (HSR) circuit, which allows for easy, external fine-tuning of your suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on high-speed compression (HSC) and high-speed rebound (HSR). This allows you to make consistent adjustments between their front and rear suspension. Nothing sticks to the ground quite like a coil shock. With an entirely updated chassis and damper, enhanced tunability, smoother action, and a MCU bumper for progressivity and end-stroke control - the Fox Suspension DHX2 Factory 2Pos-Adj Shock is ready to race straight out of the gate.Please note: A coil spring is not included with this model but is available to purchase separately.Features: Shaft Coating: Chromoly (CrMo) Steel Use: MTB Spring Type: Coil spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Detents on Spring Collar: Yes Spring Included: No, available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated Chassis: The outer body on the DHX2 features steel construction with finned inner tubes for reduced hysteresis. DHX2 features an updated low-friction hard chrome coating on the shaft with new seals designed to pair perfectly to the new shaft coating, reducing frictions and increasing seal life. Updated Damper: The updated X2 damper maintains a twin tube architecture, emplying a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension added its patented VVC technology to the HSR circuit. VVC is a proprietary variable valve technology that allows for easy, external fine-tuning of suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on HSC and HSR. This allows the rider to make consistent adjustments between front and rear suspension. MCU Bumper: The updated MCU bumper is designed to allow for supple beginning and mid-stroke, seamlessly transitioning to a bottomless end-stroke. Independent Firm Mode Circuit: This version's 2-position switch operates on an independent circuit, resulting in a firmer lockout. Revised Spring Changes: The coil-sprung DHX2 now uses a full spring collar, held in place with a C-clip, and a new preload collar with indexed notches to allow for light preload without the collar backing off.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The all-new 36. The new enduro fork standard is anything but standard. With all new design inside-and-out, plus an unmatched combination of ride quality, tunability, stiffness, weight, and alignment - we took the award-winning, EWS favorite and made it even better. Features: NEW chassis. NEW air/oil channels. NEW lower leg design, highly optimized for maximum stiffness to weight. NEW arch shape offers improved head tube clearance with shorter rakes. Updated GRIP2 damper now with dual VVC (Variable Valve Control) on HSC and HSR circuits. Matching 8-click HSC and HSR adjustment on Grip2 forks and X2 shocks. Increased crown diameter to match modern frame shape profiles. Updated EVOL air spring. Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. Specification: Damper: GRIP2 w/ dual VVC (Variable Valve Control). Travel: 100 - 160mm. Offset Options: 37mm, 44mm, 51mm. Wheel Size: 27.5 Axle Options: 15QR x 110mm Boost. Steerer: 1.5 Tapered. Colour: Gloss Orange, Gloss Black & Limited Edition Root Beer. Upper leg finish: Genuine Kashima Coat.
Fox Suspension Float X2 Factory 2-Position Adjust ShockFeaturing an updated chassis and damper, this high-quality mountain bike (MTB) rear shock delivers game-changing performance as you conquer the most demanding of trail conditions. Part of Fox Suspension's renowned Factory Series, this model is packed with features and includes a genuine Kashima coating for increased durability as well as slippery smooth operation on your ride. Coming equipped with a two-position open/firm lever for easy adjustment, Variable Valve Control (VVC) for improved high-speed rebound tunability and a lightweight air spring that provides coil-like comfort, this model is a perfect upgrade for smooth and reliable rear-end suspension.Features: Finish: Genuine Kashima coating Use: MTB Spring Type: Air spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Max PSI: 300psiTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated Damper: The Float X2's 4-way adjustable, twin-tube architecture now features patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. Updated compression ratios and a MCU bumper deliver improved progressivity and bottom out control with fewer volume spacers. Independent Firm Mode Circuit: A 2-position switch operates on an independent circuit, providing a notably firmer lockout than before, allowing for efficient climbing and wide-open descending. Updated Chassis: Float X2's entirely revised chassis features an ultra-low friction hard chrome damper shaft, updated low-friction bushings and seals, and genuine Kashima coated outer body for smoother performance than ever before. High-flow main piston. Improved bearing ratio for metric sizes. Improved high-speed rebound tunability via addition of VVC (Variable Valve Control). Increased control and decreased harshness via linear damping. Reduced length reservoir for better fit on more frames. Finned inner body for improved structural rigidity and reduced hysteresis. Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks. Updated compression ratios, 300psi max.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float X2 Factory 2-Position Adjust ShockFeaturing an updated chassis and damper, this high-quality mountain bike (MTB) rear shock delivers game-changing performance as you conquer the most demanding of trail conditions. Part of Fox Suspension's renowned Factory Series, this model is packed with features and includes a genuine Kashima coating for increased durability as well as slippery smooth operation on your ride. Coming equipped with a two-position open/firm lever for easy adjustment, Variable Valve Control (VVC) for improved high-speed rebound tunability and a lightweight air spring that provides coil-like comfort, this model is a perfect upgrade for smooth and reliable rear-end suspension.Features: Finish: Genuine Kashima coating Use: MTB Spring Type: Air spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Max PSI: 300psiTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated Damper: The Float X2's 4-way adjustable, twin-tube architecture now features patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. Updated compression ratios and a MCU bumper deliver improved progressivity and bottom out control with fewer volume spacers. Independent Firm Mode Circuit: A 2-position switch operates on an independent circuit, providing a notably firmer lockout than before, allowing for efficient climbing and wide-open descending. Updated Chassis: Float X2's entirely revised chassis features an ultra-low friction hard chrome damper shaft, updated low-friction bushings and seals, and genuine Kashima coated outer body for smoother performance than ever before. High-flow main piston. Improved bearing ratio for metric sizes. Improved high-speed rebound tunability via addition of VVC (Variable Valve Control). Increased control and decreased harshness via linear damping. Reduced length reservoir for better fit on more frames. Finned inner body for improved structural rigidity and reduced hysteresis. Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks. Updated compression ratios, 300psi max.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Packing the same revolutionary features as the 36 model while redefining what you think a long travel single crown fork is capable of, this enduro fork sets a new benchmark for confidence, performance, and durability. Part of Fox Suspension's Performance Series, it features a high-quality anodised finish on its upper tubes for extra durability as well as protection against corrosion during wet riding conditions. Another highlight is it comes equipped with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability. This makes it simple to dial in your favourite settings, so your suspension matches your riding style as well as the terrain conditions. Also benefitting from Boost axle spacing for increased stiffness and strength, plus many of the brand's finest technologies, this model is ready for hard-hitting enduro rides. Enduro Fork with Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders (push-button bleeders available separately), which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. FIT GRIP Damper Inspired from moto, the GRIP damper uses Fox Suspensions FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38’s elliptical steer tube is one of many ways we’ve further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it’s not. - 58mm crown diameter to match modern frame shape profiles. - Optional mudguard with sturdy and seamless 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris (available separately). - 31% stiffer transverse shear, 9% stiffer fore/aft and 20% torsionally stiffer than the 36 model. Manufacturer's Part Numbers: 910-21-029 Black 27.5" QR110 170mm 44mm 910-21-021 Black 29" QR110 170mm 44mm
Fox Suspension 38 Float Performance Grip ForkPart of Fox Suspension's Performance Series, this enduro fork features a high-quality anodised finish on its upper tubes for extra durability as well as protection against corrosion during wet riding conditions. Another highlight is it comes equipped with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability. This makes it simple to dial in your favourite settings, so your suspension matches your riding style as well as the terrain conditions. Also benefitting from Boost axle spacing for increased stiffness and strength, plus many of the brand's finest technologies, this model is ready for hard-hitting enduro rides.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders (push-button bleeders available separately), which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.FIT GRIP DamperInspired from moto, the GRIP damper uses Fox Suspensions FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Packing the same revolutionary features as the 36 model while redefining what you think a long travel single crown fork is capable of, the Fox Suspension 38 Float Performance Grip Fork sets a new benchmark for confidence, performance, and durability. Features: Upper Tubes Finish: Anodised Use: Enduro Axle Size: 15QRx110mm Boost Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: GRIP (3-position on-the-fly adjustability) Adjustments: Compression damping positions Open, Medium, Firm; Additional micro-adjust between settings Detents; Low-speed rebound Travel: 170mm Rake: 44mm Compatible Rotor Size: 180mm direct Post Mount, up to 230mm compatible Starting Weight: 2180gTechnologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38's elliptical steer tube is one of many ways we've further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it's not. 58mm crown diameter to match modern frame shape profiles. Optional mudguard with sturdy and seamless 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris (available separately). 31% stiffer transverse shear, 9% stiffer fore/aft and 20% torsionally stiffer than the 36 model.Manufacturer's Part Numbers: 910-21-029 Black 27.5" QR110 170mm 44mm 910-21-021 Black 29" QR110 170mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Prepared for wherever your next trail-riding adventure takes you, this mountain bike (MTB) suspension fork is feature-packed and designed to exceed the demands of Factory-level riders. Part of Fox Suspension's distinguished Factory Series, this model boasts a genuine Kashima coating on its upper tubes for amazingly smooth, ultra-durable performance. Another highlight is it also benefits from a lightweight Float EVOL air spring as well as a FIT4 damper with quick on-the-fly three-position adjust. Its wide range of adjustments means that you can easily fine-tune your front-end suspension to match your riding style as well as the terrain conditions. With three compression damping positions (Open, Medium and Firm), additional low-speed compression (Open mode adjust) and low-speed rebound, this trail fork is more tuneable and capable than ever before. Trail Fork with Float EVOL Air Spring Returning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. FIT4 Damper In its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Manufacturer's Part Numbers: 910-21-010 Black 29" QR110 130mm 51mm 910-21-007 Black 29" QR110 130mm 44mm 910-21-005 Black 29" QR110 140mm 51mm 910-21-002 Black 29" QR110 140mm 44mm