Over time fork stanchions can become dry and less responsive. This can result in loss of travel, slow rebound, and cause the fork to feel very stiff over bumps. When this happens, this top-quality suspension spray will immediately improve your fork's performance. Additionally, it's made with carefully chosen polysiloxane and advanced fluoropolymers, it's formulated to fight stiction, condition and protect seals, o-rings, and other rubber parts. It improves the surface slip of any stanchion, even ones that are coated. It's perfect for use on your old forks to bring them back to life or to help break in new forks and optimise their performance. As it reduces stiction, forks run more smoothly and quietly. Small bumps are instantly absorbed and response to big hits is noticeably improved.
This superb model is formulated specifically for lubricating electric assist drivetrains that are subject to particularly high pressure and torque. Additionally, most mid-drive e-Bike systems will add up to an additional 250 Watts to the rider's input and some performance models can add up to 350 Watts. This consistent, high power means that chains experience much higher rates of wear. While developing this lube, the goal was to create a lubricant that could not only stand up to the high torque associated with electric assist drivetrains, but which also provided long lubrication intervals, would shed dirt, prevent premature wear, and provide superior protection against rust and corrosion. Finally, with a semi-dry formulation and the proprietary blend of high pressure and corrosion inhibiting additives, Finish Line's e-Bike Chain Lube delivers on all fronts.
Eliminates the need to over-tighten clamps to achieve a tight, secure and safe fit. Over tightening can cause internal fractures and fatigue of carbon fibre parts resulting in permanent failure. Additionally inadequately tightened components can be hazardous if they move or slip suddenly whilst riding Apply Fiber Grip in a thin film to all clamping areas of stems, handlebars, seat posts, and seat tubes
This 100% synthetic oil grease coats ball bearings and races, preventing wear and distortion in headsets and bottom brackets, even in brutal down hill racing and over extended periods of time. Chosen since 1988 by more top pro teams as the slickest, toughest bicycle grease available. No matter how hard or long you ride, Finish Line Premium Grease will provide the lubrication your bearings require.
Finish Line Electric Bike Chain LubeThis superb model is formulated specifically for lubricating electric assist drivetrains which are subject to particularly high pressure and torque. Additionally, due to e-bike drivetrains experiencing much higher rates of wear, this lube sheds dirt, prevents premature wear and provides superior protection against rust and corrosion. Finally, its semi-dry formulation and proprietary blend of high-pressure additives makes this the perfect chain lube for delivering on all fronts.Features: E-bike specific chain lube Keep your ride running like new Formulated for lubricating electric assist drivetrains Semi-dry formula Blend of high-pressure and corrosion inhibiting additivesBuy Finish Line Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Finish Line Max Suspension Aerosol SprayThis superb suspension spray immediately improves your fork's performance, so you can enjoy fast rebound over bumps and no loss of travel. Additionally, it's made with carefully chosen polysiloxane and advanced fluoropolymers to fight stiction, condition and protect seals, o-rings and other rubber parts. Finally, it improves the surface slip of any stanchion, even ones which are coated.Features: Immediately improve your fork's performance Carefully chosen polysiloxane and advanced fluoropolymers Formulated to fight stiction Conditions and protect seals, o-rings and other rubber parts Improves the surface slip of any stanchion, even ones that are coatedBuy Finish Line Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Finish Line Fiber Grip Assembly GelFinish Line’s Fiber Grip Assembly Gel increases control and traction between fiber surfaces preventing unwanted wear and tear to your components. Safety, Health and The Environment:Finish Line’s Fiber Grip features an Inherently Biodegradable formulation which means that between 20% and 60% of the product will degrade within 28 days of being exposed to the outside environment.Fiber Grip is non-toxic when used in quantities and applications as intended and contains no carcinogenic or hazardous air polluting (HAP) ingredients. Additionally, this product emits no Volatile Organic Compounds (VOCs).Fiber Grip is REACH compliant for Europe and all ingredients used are listed with all major worldwide chemical inventories which mean that this product, like all Finish Line Products, conforms to all environmental regulations for use as intended.Fiber Grip contains no artificial dyes or fragrances, is non-flammable and is packaged in recyclable plastic tubes and tubs.How to Use:Apply Fiber Grip in a thin film to clamping areas of stems, handlebars, seatposts, and seat tubes. Tested and approved by leading carbon fibre component manufacturers.Features:Clear, Non-stainingNon-ToxicCapacity: 50g/455gBuy Finish Line Grease from Chain Reaction Cycles, the World's Largest Online Bike Store.
Finish Line Teflon GreaseCreated from a completely synthetic oil, this Teflon bike grease provides a highly effective friction and wear-reducing coating on bearing races and ball bearings. Ideal for use in both headsets and bottom brackets and all bike types, it offers lasting protection and smooth operation even on prolonged aggressive riding. The Grease of choice for many pro racing teams both road and off-road, it's one of the slickest and toughest on the market.Reformulated to exceed the unique and demanding requirements of bicycle bearings, it's super slick and made with Teflon fluoropolymers.Reasons to Buy: Created completely from synthetic oil.Reduces friction and wear.One of the slickest and toughest on the market.The choice for many pro racing teams both road and off-road.Features: Finish Line’s technology sets an even higher performance standard New “functional” thickener totally prevents rust and corrosion (even in saltwater) New thickener prevents washout and water emulsification New technology withstands higher pressures without sheering Tested, approved, and used by leading bike and bearing manufacturersSafety, Health and The Environment: Finish Line’s Teflon Grease features an Inherently Biodegradable formulation which means that between 20% and 60% of the product’s base oils will degrade within 28 days of being exposed to the outside environment. Finish Line Teflon Grease is non-toxic when used in quantities and applications as intended and contains no carcinogenic or hazardous air polluting (HAP) ingredients. This product emits no Volatile Organic Compounds (VOCs) and is REACH compliant for Europe and all ingredients used are listed with all major worldwide chemical inventories, which means that this product, as with all Finish Line Products, conforms to all environmental regulations for use as intended.Buy Finish Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
One bottle can be diluted down to make 4 litres of normal strength Super Bike Wash Quickly cleans mud dirt and road grime off your bike with little or no scrubbing Formula contains five different bike-cleaning solvents for high speed cleaning performance Specialist cleaning agents tackle hydrocarbons organic compounds and surface tension films Rust and oxidation inhibitors prevent parts corroding or rusting after cleaning Anti-static agent helps to prevent dirt adhesion and provides a short term shine Use the spray if you use your bike in muddy / grimy areas as it has a deep penetration of contaminants Safe for all areas of the bike including aluminium and carbon fibre - and can be used on motorbikes boats and more! Environmentally safe biodegradable formula does not contain detergents phosphates benzene or chlorinated solvents
Fiber Grip is specially designed to create friction and reduce slippage between clamped carbon fibre surfaces on bicycle frames and components Eliminates the need to over-tighten clamps to achieve a tight secure and safe fit Over tightening can cause internal fractures and fatigue of carbon fibre parts resulting in permanent failure Additionally inadequately tightened components can be hazardous if they move or slip suddenly whilst riding Apply Fiber Grip in a thin film to all clamping areas of stems handlebars seat posts and seat tubes Tested and approved by leading carbon fibre component manufacturers Available in 1.75 oz / 50 g or 1 lb / 450 g quantities
Ceramic Grease represents the most advanced bearing lubrication technology currently available from Finish LineA unique formulation features sub-micron ceramic particles Teflon fluoropolymer and premium non-toxic synthetic oilsGuaranteed to optimise the performance and efficiency of any bottom brackets hubs and headset bearingsAs bearings become coated with Teflon and ceramic particles friction and heat is dissipated which ensures bearings last longer and run smoother and quieterPrevents rusting even when exposed to salt waterExcellent on handlebar stems & seatposts as well as bearings cables and threaded assembliesGet a faster smoother and quieter bike just by changing your grease!Available in 2 oz / 60 g or 1 lb / 450 g quantities
Key Features: A highly absorbent mat with a leak-proof backing, Absorbs all types of liquid, Perfect for your work station or under a turbo trainer.
This stunning model goes on wet and stays wet on the chain. Recommended for long-distance riding and extreme weather conditions. Additionally, if you use it for riding off-road or in dry climates, be sure to wipe the excess from parts; this will help minimise the attraction of dirt and grime. Since 1994, when this lube was first introduced, it has become the preferred lubricant for many professional on and off-road teams world-wide. Use wet lube when you ride hard and long. Proven performance for 100-plus mile rides, muddy off-road conditions, long rainy commutes, and foggy salt-air coastal climates. A heavier, wet-style lubricant that requires a little more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection. Safety, Health and The Environment: Finish Line's WET Lubricant features an Inherently Biodegradable formulation which that between 20% and 60% of the product's base oils will degrade within 28 days once exposed to contact with common soil-borne bacteria. WET Lube is non-toxic when used in quantities and applications as intended and contains no carcinogenic or hazardous air polluting (HAP) ingredients and emits no Volatile Organic Compounds (VOCs). Additionally, WET Lube is REACH compliant for Europe and all ingredients used are listed with all major worldwide chemical inventories and as such this product conforms to all environmental regulations for use as intended. All WET Lube is packaged in either recyclable PET #1 plastic squeeze bottles or recyclable steel cans with no CFCs or ozone depleting propellants used.
The Absorb-It Mat comes in two different sizes: 48" X 18" and 60" X 36. Additionally, its special absorption fibre technology absorbs and traps chain lubricants, cleaners, degreasers, brake fluid and hydraulic oils. Finally, its combination of absorption fibres and a leak-proof poly liner make it the perfect accessory when degreasing and lubricating bike chains. Small: The 48" x 18" mat will absorb and trap up to 1 litre of fluids. Large: The larger 60" x 36" mat will absorb and trap up to 2.5 litres of fluid. Both mats can be cut with a scissor to fit in custom areas.
Guaranteed to optimise the performance and efficiency of any bottom brackets, hubs and headset bearings. As bearings become coated with Teflon and ceramic particles, friction and heat is dissipated which ensures bearings last longer and run smoother and quieter.
Finish Line Absorb-It Tool MatAn excellent addition to your cleaning setup, this super-absorbent, leak-proof mat by Finish Line keeps your floor spotless by soaking up every drip when cleaning and maintaining your bike. Equipped with special absorption fibre technology, it soaks up and holds on to all kinds of lubricants, cleaners, degreasers, brake fluid and hydraulic oils. Available in two sizes, these mats can hold up to 1 litre or 2.5 litres of liquid, making the Absorb-It an essential for any garage or workshop. Features: Construction: Absorption fibres and a leak-proof poly liner Absorbance: Small: Up to 1 litre; large: Up to 2.5 litres Buy Finish Line Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Finish Line Cross Country Wet Bike Chain LubeA brilliant bottle which provides protection through the most extreme cross country conditions, this high-performance lube utilises high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives to keep your chain working as efficiently as can be. This heavy, wet-style lubricant has been tested and proven over 100-mile distances and through the wettest conditions to make sure your drivetrain doesn't let you down when the weather does.Features:Suitability: Long-distance riding, extreme conditionsVolume: 240mlBuy Finish Line Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Finish Line Ceramic GreaseFinish Line's Ceramic Grease is the bicycle industry's newest and most advanced bearing lubrication technology.FeaturesFormulated with micron-sized ceramic particles, Teflon fluoropolymer and premium non-toxic synthetic oils.Guaranteed to optimize the performance and efficiency of bottom brackets, hubs and headset bearings.As bearings become coated with Teflon and ceramic particles, friction and heat are dissipated.Bearings last longer and run quieter & smoother.Prevents rusting even when exposed to salt water! Excellent on stems & posts as well as cables and threaded assemblies.Size - 450g or 60g**PLEASE NOTE: Grease does not fit the Finish Line Grease Gun as the thread diameter of the Tube is too small for the grease guns thread**Buy Finish Line Grease from Chain Reaction Cycles, the World's Largest Online Bike Store.
Finish Line 1-Step is recommended for cyclists who take a minimalist approach to drivetrain maintenance. It is formulated with rust and corrosion inhibitors that provide ultimate protection in extreme conditions including coastal salt air. 1-Step does not compromise on its ability to reduce pedalling friction over long intervals, often exceeding 100 miles. To clean, spray on, wipe off. To lubricate, do not wipe off. For cyclists on the go, 1-Step is the perfect choice for maintaining your bicycle's drivetrain.
Ideal for use in the most adverse conditions, Finish Line Cross Country Wet Lubricant is a high viscosity lube for long lasting protection, featuring a Molybdenum additive for withstanding high torque loads and extreme pressure. Designed to be highly water repellent, making it perfectly suited to use during long rides, harsh off road conditions and wet commuting.Superior performance in the wetEasy application