Finish Line Ceramic Grease features a combination of advanced ceramic particles, teflon flouro-polymers and high quality synthetic oils to optimise the performance of any bottom brackets, hubs and headset bearings. The Ceramic Particles coat the bearings and serve to reduce friction and dissipate heat, ensuring bearings not only run significantly smoother and quieter but also last longer as a result of the decreased wear and rust inhibitors. Also suitable for use of handlebar steams, seat posts, bearings, cables and threaded assemblies.Advanced ceramic bearing lubricationEnsures smooth and quiet runningIncreases life of bearingsFeatures rust inhibitorsFaster, smoother and quieter running
Lubricating a chain is an essential, but often dreaded task. It can be time-consuming and often results in lubricant landing on the frame, wheels, braking surfaces, and the ground. Thanks to the No Drip Chain Luber every link can now be properly lubricated in seconds, without making a mess or wasting a drop.Complete and clean lubrication of your chain: no drips, no mess, and no missed linksSimply back pedal and gently squeeze the LuberLubricates your chain in seconds with minimum wasteVarious lubricants to suit all weather conditionsThe chain is quick and easy to use - simply fill the No Drip Chain luber with the lubricant of your choice. While back-pedalling, place the applicator head on the chain and squeeze the bottle. A wicking pad in the applicator head will ensure that every link is evenly coated, without lube dripping or flying all over the place. Saves time, saves money; uses 50% less lube each time you lubricate your chain. The No Drip Chain Luber comes with two replacement wicking pads and a child-safety travel cap.
Specifically designed to increase friction in clamped carbon fibre surfaces, Finish Line Fibre Grip Carbon Fibre Assembly Gel is an essential when dealing with expensive carbon fibre bike frames as well as components such and seatposts, handlebar's and stems. Applied as a thin film to all clamping areas, eliminating slip and lessening the need for over tightening of clamps, carbon grip gel reduces the risk of stress fractures and fatigue within the carbon fibre (which can in turn lead to catastrophic failure). Finish Line Fibre Grip is tested and approved by leading carbon fibre component manufactures.Carbon fibre assembly gelEssential when dealing with carbon fibre componentsReduces slippage between clamped surfacesProtects against fracturesTested and approved by manufacturers
Formulated specifically for bicycle bearings, Finish Line Teflon Grease coats and protects ball bearings and races, preventing wear and corrosion. Featuring hydrophobic thickening agents to repel water and ensure stability (even when submerged) and designed to handle extremes of heat and pressure. Making it dependable and ideal for use in both road or mountain bikes, and many other applications such as hub bearings and pivots.Specifically Formulated Bearing GreaseProtects Ball Bearings And Races, Keeping Them SmoothHydrophobic And Capable Of Handling Extreme HeatIdeal For Numerous Applications
The original Dry Lubricant, revolutionary when released it has become the standard for bike lubrication. Using Teflon to reduce friction and mechanical wear it effectively penetrates into hard to reach areas for complete protection, while its dry formula resists attracting dirt. Non-toxic and biodegradable, Finish Line Teflon Plus Dry Lubricant is suitable in all weathers for use on chains, derailleurs, shifter and brake pivots.The original dry lubricantDry formula resists dirt buildupEasy application, available in dropper bottles or aerosolsSuitable for use in all weathers
The Finish Line Grease Gun offers a reliable and clean method of applying grease, without the risks of contaminated grease (common with open pots) allowing accurate application without risk of seal damage. A special long tip reaches everywhere and works perfectly with all popular grease fittings. The gun allows measured grease injection (2cc per stroke), eliminating over greasing issues which can increase friction. Threaded for use with grease tubes (such as Finish Line Teflon or Ceramic Grease 100ml tubes) and suitable for all grease guard purge-able bearing systems.High Precision Grease GunAvoids ContaminationLong Tip Matches All Common FittingsSuitable For Grease Guard SystemsAvoid Seal Damage And Over Greasing
The original Dry Lubricant, revolutionary when released it has become the standard for bike lubrication. Using Teflon to reduce friction and mechanical wear it effectively penetrates into hard to reach areas for complete protection, while its dry formula resists attracting dirt. Non-toxic and biodegradable, Finish Line Teflon Plus Dry Lubricant is suitable in all weathers for use on chains, derailleurs, shifter and brake pivots.The original dry lubricantDry formula resists dirt buildupEasy application, available in dropper bottles or aerosolsSuitable for use in all weathers
Finish Line Gear Floss is an essential cleaning and detailing accessory. Constructed from microfiber, each rope is perfect for cleaning cassettes and hard-to-reach bike parts such as front chain rings, derailleur pulley wheels, hubs, axles, brake arms, fork wipers and much more. Unlike other materials that simply move the dirt and grime around, the microfiber technology of Finish Line Gear Floss attracts and traps it inside its star-shaped grooves. It is also highly tear-resistant and washable so is very cost effective.Advanced Cleaning and Detailing ToolPerfect for Hard-to-Reach Bike PartsMicrofiber Technology Attracts and Traps DirtHighly Tear-Resistant and WashableContains 20x 51cm Ropes Per Pack
Finish Line's DOT Brake Fluid is formulated specifically for bicycle brake systems and features a no compromise leading edge chemistry to provide superior fluid life and braking performance.Specifically engineered for use in bicycle hydraulic disc brakesProvides maximum fluid life and braking performance, even at low temperaturePrevents foaming and overheatingMeets DOT 3, 4, and 5.1 specificationsFinish Line DOT Brake Fluid was specifically engineered for use in bicycle hydraulic disc brake systems and is compatible with all 3, 4, and 5.1 DOT brake systems. The chemical additives contained within the Finish Line Dot 5.1 brake fluid spread moisture through the complete system to increase the boiling temperature, which stops the moisture pooling in the caliper body and allows the brakes to operate up to 270 C. When you are serious about getting the most out of your braking system, Finish Line DOT Brake Fluid is the only choice.
Finish Line's Mineral Oil brake fluid utilises Finish Line's expertise in lubricants and fluids to create a technical blend for maintaining long life and high performance in all conditions.Supplied as a bottle of 4oz / 120ml.
Finish Line Ceramic Wax Lubricant contains patented Boron Nitride and Fluoropolymer technology to provide high performance lubrication that adheres while it dries, running totally clean in use avoiding the need for regular chain cleaning Designed for re-application every 50-75 miles to maintain a durable self cleansing wax coating. Ceramic Lubricant is white in colour and therefore care must be taken to avoid possible staining of components and frames. Size: 60ml.
Over time fork stanchions can become dry and less responsive. This can result in loss of travel, slow rebound, and cause the fork to feel very stiff over bumps. When this happens, a quick shot of Max Suspension Spray will immediately improve your fork's performance.Carefully chosen polysiloxane and advanced fluoropolymersFormulated to fight stictionConditions and protects seals, o-rings and other rubber partsImproves the surface slip of any stanchion, even ones that are coatedMade with carefully chosen polysiloxane and advanced fluoropolymers, Max Suspension Spray is formulated to fight stiction, condition and protect seals, o-rings, and other rubber parts. Max improves the surface slip of any stanchion, even ones that are coated! Use Max on old forks to bring them back to life or use Max to help break in new forks and optimise their performance. As Max reduces stiction, forks run more smoothly and quietly. Small bumps are instantly absorbed and response to big hits is noticeably improved.
The Starter Kit 1-2-3 brings you three of Finish Lines most popular products in one convenient cleaning kit: The Grunge Brush, Multi Bike Degreaser, and Dry Lube.Hard-wearing brushes designed for super-fast cleaning of chains and other bike componentsIncludes 4 oz bottle of EcoTech 2 cleaner and degreaserIncludes a 2 oz bottle of Cross country wet lubeProven performance for long rides, muddy off-road conditions and long rainy commutesThe synthetic oils used are non-toxic and biodegradableThe Grunge Brush is Finish Lines most popular cleaning brush because it is super durable, and now even easier to use with a new ergonomic handle. It's stiff bristles break up grunge and grime. Use the u-shaped end to clean your chain and chainrings, use the tail-end to clean in your derailleurs and around the dropouts and between the bottom bracket and chainrings. Multi Bike Degreaser is a super strong cleaner that breaks up grease and grime fast. It s 100% biodegradable, super low order, and safe with all plastic and rubber parts so its safe to use anywhere. The Cross Country Wet lubricant is a high viscosity lube for long lasting protection, featuring a Molybdenum additive for withstanding high torque loads and extreme pressure. Designed to be highly water repellent, making it perfectly suited to use during long rides, harsh off-road conditions and wet commuting.
Finish Line Suspension Fork And Shock Oil has been specifically designed for use in all makes of oil damped suspension forks and shocks. Combining the reliability of a petroleum based oil with the durability and extended lifespan of synthetic fluid, ensuring no variation in viscosity due to temperature or heat build up Finish Line Suspension Oil maintainis consistent feel and superior suspension performance no matter the conditions.Premium fork & shock oilSuitable for all makes of suspensionSuperior performance in all conditionsConsistent and predictable damping for extended periods
Five different cleaning agents work together to create a high speed cleaning system. Two different rust and oxidation inhibitors protect metal surfaces and prevent flash rusting. Super Bike Wash™ is a complex bio-cleaning compound. It is not a soap or detergent and it does not contain chlorinated solvents, phosphates, benzenes, or napthas, which can damage bicycle components and/or the environment.
Designed for long-term use and durability, the Finish Line Mechanic Grip Gloves™ provide the ultimate in grip, protection, and dexterity. These reusable gloves make it easier to work on small, precision bike parts. Mechanic Grip Gloves are latex-free and feature a tactile-enhancing polyurethane coating that seals out grease, oil and grime. A textured surface on the palm-side of the glove provides enhanced grip, making it easier to work on small parts. Finish Line Grip Gloves feature a breathable upper fabric, which helps keep hands cool and dry. Mechanic Grip Gloves are easy to take on and off, so gearing up and down for mechanical repairs has never been easier. Unlike costly single use gloves, one pair of Grip Gloves can last for many weeks.
Compatible with all grease injection ports, this is a perfect lubricator for hubs, bottom brackets, crank bolts, pedals and anywhere else you need to apply it. A great tool that prevents common grease contamination from using fingers and open tubs. Developed with a long tip for easy application to recessed suspension pivots and other awkward spaces, this Grease Gun will work with Finish Line's grease as well as other standard grease tubes.
Nano-sized platelets of ceramic Boron Nitride and Advanced fluoropolymers combine with a proprietary binder to ensure optimum adhesion and create a durable ceramic wax coating. Ceramic is naturally white and may cause staining - apply carefully
This superb pack contains three bike care products for protecting and maintaining your bike. Wet Lube - 4oz Wet Lube is typically recommended for extreme conditions. Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives. Wet Lube is Finish Line's strongest, longest lasting and most water resistant lubricant. Wet Lube goes on wet, and stays wet, to provide maximum drivetrain smoothness, extremely quiet rides, and ultimate rust protection in the harshest of environments. If you use Wet Lube for riding off-road or in dry climates, be sure to wipe the excess from parts to minimize the attraction of dirt and grime. Since 1994, when Wet Lube was first introduced, it has become the preferred lubricant for many professional on and off-road teams around the world. Use Wet Lube when you ride hard and long. Proven performance for 100-plus mile rides, muddy off-road conditions, long rainy commutes, and foggy salt-air coastal climates. A heavier, wet-style lubricant that requires a little more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection. Super Bike Wash - 4oz Use Super Bike Wash™ to quickly clean dirt, clay, road grime, chain soils, nutritional residues and winter storage grime off all surfaces of your bike with little to no scrubbing. Super Bike Wash™ uses state of the art, eco-friendly cleaning agents that work together to create a high-speed cleaning system. Super Bike Wash™ is non-toxic and meets the highest readily biodegradable standards. It can be safely used indoors or outdoors. Super Bike Wash™ can be used two ways: spray on and wipe off, or spray on and hose off. It is strong enough to remove surface grime off the drivetrain and safe enough to remove all the grime that builds up on the frame, saddle, brakes, and handlebar tape. Safe for carbon fibre, titanium, aluminium, steel, and clear coat. Recommendation: Use Super Bike Wash™ every second or third ride to keep your bicycle looking like new and to remove the contaminants that slowly but surely starts to degrade look and performance of a bicycle. Multi-bike Degreaser - 4oz Strong and safe! A new technology degreaser that quickly cleans without damage to rubber or plastic components. Strong enough for the grimiest metal parts, yet safe enough to clean parts with rubber o-rings and seals, urethane elastomers, painted surfaces, etc... Multi-bike Degreaser features 100% active (no water) biodegradable degreasing solvents, so bicycle chains and gears are cleaned more quickly, and often without a need for a water rinse. Less time cleaning means more time riding! Powerful soy-extracted solvents break down grease, grime, and stubborn soils with amazing ease and will biodegrade rapidly when they get in the environment.