The same ergonomic grip as the GE1 Evo factory, but using Ergon’s entry-level GravityControl Rubber compound. Features: 2 grip diameters: Standard for glove size Large/X-Large (8.5-10.5) & Slim for glove sizes Small/Medium (6.5-8.5) Carbon friendly CNC Aluminium clamps Intergrated end plugs 105g per pair (Standard) 90g per pair (Slim)
The popular GP1, but with the feel and comfort of natural cork. The unique qualities of cork means that it is antibacterial and hypoallergenic. Cork’s natural damping qualities also make it an ideal grip material, and its low density mean the resulting grip is a lot lighter. The BioKork grips use 40% cork, sourced from sustainable forests in Portugal which is certified for its ecologically sound production. This ecological theme is continued throughout the rest of the grip. The inner core is plastic reinforced using natural fi bre, which make up 40% of its mass. In place of mineral oil, the gel in the palm section of the grip is vegetable oil based. It is all a result of Ergon’s “GreenLab” initiative.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
The original ergonomic grips for touring and fitness cyclists. The worldwide leader in function, material and craftsmanship, the GP Series prevents numb fingers, aching hands and forearms.Carbon friendly 100% recyclable aluminium clampsMade from 100% German, TUV-certified rubber compoundsSize: small: 92mm cross section, large: 102mm cross sectionWeight: 195g (Approx.)The ergonomic grip has been made from a 100% German, TUV-certified rubber compound that has been infused with a medical-grade white mineral oil for superb flexibility and durability. A forged aluminium clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed. Sizing Information:In order to help you maintain perfect control over your bike, your hands should not completely envelop the grip, which is why Ergon offers many grips in two size diameters Small and Large.The difference refers to the grip width (hand size), meaning a larger hand will have a more positive fit on a thicker grip, while a smaller hand is better fit to a smaller grip. For hand/glove sizes 6.5 to 8.5" we recommend Small, for 8.5 to 10.5" Large usually is better. To measure your hand/glove size you need to measure around the largest part of the hand over the knuckle while making a fist, excluding the thumb.
The best of both worlds. The GA3 combines the relief benefits and wrist support of ergonomic wing grips like the GP1 with the freedom of movement found in rounder MTB grips like GA2.Carbon friendly CNC Aluminium clampsReplaceable bar end plugsEnsures the correct hand position to prevent aches and painsHelps to reduce arm pumpSize; Large or SmallThe ergonomic shape fits the contours of the hand and significantly reduced arm pump on long trails whilst the wing provides support to ensure the correct hand position preventing aches and pains. Based on the well-known GA2 Grips, the GA3 was developed with mini wings. As a perfect extension of the GA grip series, the GA3 offers even more comfort on the trail, but also works perfectly on fitness or sporty urban bikes.Sizing Information:In order to help you maintain perfect control over your bike, your hands should not completely envelop the grip, which is why Ergon offers many grips in two size diameters Small and Large.The difference refers to the grip width (hand size), meaning a larger hand will have a more positive fit on a thicker grip, while a smaller hand is better fit to a smaller grip. For hand/glove sizes 6.5 to 8.5" we recommend Small, for 8.5 to 10.5" Large usually is better. To measure your hand/glove size you need to measure around the largest part of the hand over the knuckle while making a fist, excluding the thumb.
After the successful launch of the GD1 Factory in 2017 and multiple podiums, Ergon have launched the updated GD1 Evo using GravityControl Rubber. It features excellent damping properties, CNC clamps for a secure fit and interchangeable bar end plugs.Thumb Zone Ultra soft damping texture for the thumb areaFingertip Zone Maximum grip for the fingertipsLower Palm Zone (Top) Precise damping properties in the lower palm zone2 grip diameters: Standard for glove size Large/X-Large (8.5-10.5) & Slim for glove sizes Small/Medium (6.5-8.5)Carbon friendly CNC Aluminium clampsInterchangeable end plugs140g per pair (Standard)125g per pair (Slim)Sizing Information:In order to help you maintain perfect control over your bike, your hands should not completely envelop the grip, which is why Ergon offers many grips in two size diameters Small and Large.The difference refers to the grip width (hand size), meaning a larger hand will have a more positive fit on a thicker grip, while a smaller hand is better fit to a smaller grip. For hand/glove sizes 6.5 to 8.5" we recommend Small, for 8.5 to 10.5" Large usually is better. To measure your hand/glove size you need to measure around the largest part of the hand over the knuckle while making a fist, excluding the thumb.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
After the successful launch of the GD1 Factory in 2017 and multiple podiums, Ergon have launched the updated GD1 Evo using GravityControl Rubber. It features excellent damping properties, CNC clamps for a secure fit and interchangeable bar end plugs.Thumb Zone Ultra soft damping texture for the thumb areaFingertip Zone Maximum grip for the fingertipsLower Palm Zone (Top) Precise damping properties in the lower palm zone2 grip diameters: Standard for glove size Large/X-Large (8.5-10.5) & Slim for glove sizes Small/Medium (6.5-8.5)Carbon friendly CNC Aluminium clampsInterchangeable end plugs140g per pair (Standard)125g per pair (Slim)Sizing Information:In order to help you maintain perfect control over your bike, your hands should not completely envelop the grip, which is why Ergon offers many grips in two size diameters Small and Large.The difference refers to the grip width (hand size), meaning a larger hand will have a more positive fit on a thicker grip, while a smaller hand is better fit to a smaller grip. For hand/glove sizes 6.5 to 8.5" we recommend Small, for 8.5 to 10.5" Large usually is better. To measure your hand/glove size you need to measure around the largest part of the hand over the knuckle while making a fist, excluding the thumb.
More grip, more comfort and an even more grip. Never rest upon the successes of the previous day. With the GE1 Evo Ergon appeal to all Enduro riders and racers who are looking for more comfort, grip and a precise grip. With a super-soft compound and anti-slip finish, they provide lasting comfort and outstanding grip no matter how hard you're pushing.2 grip diameters: Standard for glove size Large/X-Large (8.5-10.5) & Slim for glove sizes Small/Medium (6.5-8.5)Carbon friendly CNC Aluminium clampsIntegrated end plugsMaterial: Gravity Control RubberThe aim of the GE1 update was to further increase the grip on the handlebars while further reducing required strength input. The results are more comfort, better control of your bike and an optimised arm position.The texture alignment is slightly adjusted against the hand rotation, intersecting channels in the gripping zone and differently shaped elements increase the grip of the GE1 Evo. The texture update is completed all the way to the edge of the grip itself, affording more room for comfort. The ulnar nerve on the outside of the hand is effectively relieved and numbness is prevented.Ergon really has obsessed over every detail with these grips. In addition to the advanced compound and shape, there s a patent-pending inner construction. This features a forged inner clamp and the inner core is connected to an integrated grip end. The reason Ergon adopted this design, was to increase the surface area for the hand right to the grip s end, thus preventing pressure on the hand's outer nerves. This design also helps to dampen vibrations of sudden shocks and trail feedback.
All-Mountain grip with a superb tactile feel thanks to the super soft, UV-stable rubber compound, exclusively developed and manufactured in Germany for Ergon. This allows for greater control on demanding trails.Carbon friendly CNC Aluminium clampsReplaceable bar end plugsDiameter: 30mmThe ergonomic shape requires less rider grip pressure while specific grip zones matched to the shape of the hand increase tactile feedback and traction. The inner construction varies in thickness to allow greater damping, which results in less ulna nerve stress. The inboard aluminium clamp allows even more grip area at the end of the bars. The grip set is lock-on and carbon bar friendly.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
After the successful launch of the GD1 Factory in 2017 and multiple podiums, Ergon have launched the updated GD1 Evo using GravityControl Rubber.Thumb Zone Ultra soft damping texture for the thumb areaFingertip Zone Maximum grip for the fingertipsLower Palm Zone (Top) Precise damping properties in the lower palm zone2 grip diameters: Standard for glove size Large/X-Large (8.5-10.5) & Slim for glove sizes Small/Medium (6.5-8.5)Carbon friendly CNC Aluminium clampsInterchangeable end plugs140g per pair (Standard)125g per pair (Slim)Sizing Information:In order to help you maintain perfect control over your bike, your hands should not completely envelop the grip, which is why Ergon offers many grips in two size diameters Small and Large.The difference refers to the grip width (hand size), meaning a larger hand will have a more positive fit on a thicker grip, while a smaller hand is better fit to a smaller grip. For hand/glove sizes 6.5 to 8.5" we recommend Small, for 8.5 to 10.5" Large usually is better. To measure your hand/glove size you need to measure around the largest part of the hand over the knuckle while making a fist, excluding the thumb.
The new gravity-focused grip series GFR1 from Ergon has been developed and tailored according to the expectations and wishes of Tahnée Seagrave (UK) and her colleague team riders of the Canyon FMD Racing. The Ergon development team always works very closely with athletes and teams, which enables them to design products for the highest demands within their target group and to be used at the very limit. The grip has a slim overall shape for maximum feedback, yet still provides an extremely high level of damping through the ribbed section under the palm. The lower grip zone (finger) is strongly pronounced to keep gripping forces at a minimum when lifting the front wheel. The slim inner stop further assists in finding the right-hand position while still providing free shifter access. The high-strength alloy clamps on the inside keeps the grip from twisting even on carbon bars.
The new gravity-focused grip series GFR1 Factory has been developed and tailored according to the expectations and wishes of Tahnée Seagrave (UK) and her colleague team riders of the Canyon FMD Racing. The Ergon development team always works very closely with athletes and teams, which enables them to design products for the highest demands within their target group and to be used at the very limit. The grip has a slim overall shape for maximum feedback, yet still provides an extremely high level of damping through the ribbed section under the palm. The lower grip zone (finger) is strongly pronounced to keep gripping forces at a minimum when lifting the front wheel. The slim inner stop further assists in finding the right-hand position while still providing free shifter access. The high-strength alloy clamps on the inside keeps the grip from twisting even on carbon bars. The Factory version provides incredible grip and rebound properties. The grip feeling is soft but still super defined and precise.
The original ergonomic grips for touring and fitness cyclists. The worldwide leader in function, material and craftsmanship, the GP Series prevents numb fingers, aching hands and forearms.Fibreglass composite clamps with rubber insertsMade from 100% German, TÜV-certified rubber compoundsBar end and grip body can be changed and adjusted to suit your preferenceWeight: 338g (approx.)The Ergon GP3 Grips come with a 3-finger bar end to deliver more hand positions and improved leverage and stability when climbing or during out of the saddle riding. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP3 eliminates numb hands, aching fingers, and tired forearms. The GP3 is made from 100% German, TÜV-certified rubber compounds of the purest quality.Sizing Information:In order to help you maintain perfect control over your bike, your hands should not completely envelop the grip, which is why Ergon offers many grips in two size diameters Small and Large.The difference refers to the grip width (hand size), meaning a larger hand will have a more positive fit on a thicker grip, while a smaller hand is better fit to a smaller grip. For hand/glove sizes 6.5 to 8.5" we recommend Small, for 8.5 to 10.5" Large usually is better. To measure your hand/glove size you need to measure around the largest part of the hand over the knuckle while making a fist, excluding the thumb.
The new gravity-focused grip series GFR1 Factory has been developed and tailored according to the expectations and wishes of Tahnée Seagrave (UK) and her colleague team riders of the Canyon FMD Racing. The Ergon development team always works very closely with athletes and teams, which enables them to design products for the highest demands within their target group and to be used at the very limit. The grip has a slim overall shape for maximum feedback, yet still provides an extremely high level of damping through the ribbed section under the palm. The lower grip zone (finger) is strongly pronounced to keep gripping forces at a minimum when lifting the front wheel. The slim inner stop further assists in finding the right-hand position while still providing free shifter access. The high-strength alloy clamps on the inside keeps the grip from twisting even on carbon bars. The Factory version provides incredible grip and rebound properties. The grip feeling is soft but still super defined and precise.
The new Ergon SM Comp Men s Saddle is specifically tailored to the features of the male anatomy and optimized for the requirements of mountain biking. With the assistance of the latest scientific studies and intensive prototyping Ergon s interdisciplinary development team consisting of sports scientists, industrial designers, engineers and test riders have come up with a new generation of pressure-relief men s saddles. Relief Inlays: Increased comfort due to OrthoCell-Inlays in the seating area, which help distribute pressure betterLarge-Area Pressure Distribution: Perfect pressure distribution in the sit and pubic bones by means of a flat, even contact area and high-end padding foamsFlat Rear: The narrow, slightly inclining rear with a flat contour and a minimal ramp-up give great freedom of movement on the downhillsFlat contour: Due to the more upright pelvic orientation the saddle surface is flat with great freedom of movementShape: Through its Y-Shape the freedom of movement and legroom are maximized, while at the same time all bone structures are ideally supportedIntegrated Mount: Convenient removable mount for accessories like Topeak saddle bagsThe SM Men saddles effectively avoid discomfort and numbness for most applications in mountain biking for most types of mountain bike riders. The extremely deep and rearward increasing relief channel is complimented by a proper cut-out in the deepest spot. This construction combines all the benefits of a standard cut-out saddle without its drawbacks (often a very stiff shell) producing a particularly high degree of pressure relief of the sensitive perineal area. Exceedingly high pressures often are the cause for discomfort and numbness in the genital area.Shell: Nylon CompositeRails: TiNoxCover: MicrofibrePadding: Orthopaedic Comfort Foam with OrthoCell PadsWeight: 270g (S/M), 280g (M/L)Size guide:Small/Medium: 9-12cm Sit bone widthMedium/Large: 12-16cm Sit bone width
The SFC3 Gel Saddle from Ergon offers an ergonomic comfort saddle for fitness bikes and sporty touring bikes that effectively relieves numbness and discomfort in the perineum and genital area. Large-Area Pressure Distribution: Provides optimal pressure distribution for sit and pelvic bones, the contoured surface area helps prevent saddle discomfort.Padding Construction: Orthopaedic padding provides enhanced support and optimal pressure distribution.Seating Surface: The especially wide seating surface is made for tilted to slightly upright seating positions the typical posture of a fitness rider. Pronounced Relief Channel: Relief channel helps to provide increased protection for soft-tissue areas. The dimensions and position of the relief channel are optimized with the help of many test riders by means of the latest pressure measurement technology. An extra-large seating surface effectively reduces pressure peaks and optimally distributes the pressure on the sitting bones and pubic bones. Orthopaedic padding provides enhanced support and optimal pressure distribution. The relief channel helps to provide increased protection for soft-tissue areas. Shell: Nylon CompositeRails: TiNoxCover: MicrofibrePadding: Orthopaedic Comfort Foam with Gel PadsWeight: 310g (S/M), 330g (M/L)Size guide:Small/Medium: 9-11cm Sit bone widthMedium/Large: 11-13cm Sit bone width
The Ergon design team has analysed the requirements of E-Mountain bikers in detail and the result is the SM E-Mountain Sport Men's Saddle. Longer periods of sitting, steeper climbs and greater levels of impact characterise the E-MTB experience. After intense development, the optimal saddle shape was found. Supporting Ramp: Strongly raised ramping for maximum support from behind helps stabilizing your position on the bike and saves energy when riding uphill.Soft Comfort Padding: Maximum comfort when seated due to a thicker padding even on long rides.Pronounced Relief Channel/Cut-Out: The Relief channel helps to avoid numbness and provides increased protection for soft-tissue areas. Specially adapted for men and women.Pressure Relief Inlays: More comfort thanks to the OrthoCell-Inlays in the seating area, which helps distribute pressure better.Wide Front: In particularly steep trail sections, the position often is shifted towards the front. That s why the E-Mountain s saddle nose is deliberately designed wide and comfortable.Integrated Mount: Convenient removable mount for accessories like Topeak saddle bagsThe rear ramp better supports the rider in steep uphill riding situations when seated. The V-shape offers freedom of movement across the wide flanks up to the padded nose important for particularly steep climbs. This saddle offers maximum comfort due to its thicker padding and relief channel cut-out helping to avoid numbness. Also the pressure relief inlays help distribute pressure more effectively and a wide front nose helps you move forward on the saddle on particularly steep climbs and stay comfortable.Shell: Nylon CompositeRails: CroMoCover: MicrofibrePadding: Orthopaedic Comfort Foam with OrthoCell InlaysWeight: 335g (S/M), 350g (M/L)Size guide:Small/Medium: 9-12cm Sit bone widthMedium/Large: 12-16cm Sit bone width
The original ergonomic grips for touring and fitness cyclists. The worldwide leader in function, material and craftsmanship, the GP Series prevents numb fingers, aching hands and forearms.Fibreglass composite clamps with rubber insertsMade from 100% German rubber compoundsBar end and grip body can be changed and adjusted to suit your preferenceWeight: 288g (approx.)The big brother the GS2 the Ergon GS3 uses the same grip, but with a larger 3 finger bar end. The bar end is made out of fiberglass reinforced composite, which offers more hand positions for increased comfort and leverage on long MTB rides. Additional rubber is used on the bar end improving the riders grip during hand position changes. The exclusive German produced rubber compound found in the grip and on the bar end enables precise steering and control, all while still maximising optimised damping features. The grip provides ideal comfort over long distances through ultimate pressure distribution and ride tuned flex.Sizing Information:In order to help you maintain perfect control over your bike, your hands should not completely envelop the grip, which is why Ergon offers many grips in two size diameters Small and Large.The difference refers to the grip width (hand size), meaning a larger hand will have a more positive fit on a thicker grip, while a smaller hand is better fit to a smaller grip. For hand/glove sizes 6.5 to 8.5" we recommend Small, for 8.5 to 10.5" Large usually is better. To measure your hand/glove size you need to measure around the largest part of the hand over the knuckle while making a fist, excluding the thumb.