This eclat "Camber Welded X Cortex" Front Wheel is a 20" front wheel wheel which consists of the female eclat "Cortex" Front Hub with hubguards and the welded eclat "Camber Welded" rim. The eclat "Camber Welded X Cortex" Front Wheel includes a eclat rim tape as well ###section### Product Specs WHEEL SIZE: 20" HUB: Eclat Cortex AXLE: Female RIM: Eclat Camber Welded SPOKES: Straight Gauge NIPPLES: Brass WEIGHT: 1050g
Replacement bearing set for the Eclat Seismic hub.
The Eclat Unit U-brake is a low-profile designed brake, constructed from 6066 forged alloy, and comes equipped with eclat's brake hardware. The Unit's straightforward design allows for precise fine-tuning.
Lightweight at just 440g with a strong double walled design, The Eclat E440 has the edge over the competition. The tall profile provides rigidity while the straight side walls provide added assistance if you're running brakes. ###section### Product Specs WHEEL SIZE: 20" SEAM: Welded ERD: TBC HEIGHT: 16mm WIDTH: 34mm SPOKE HOLES: 36 WEIGHT: 440g
Geoff Slattery Signature Top Load Stem from Eclat. Using a traditional, solid classic topload design, Geoff’s stem features 30mm rise and a wide faceplate with larger head bolts to allow the bars to be really clamped down and prevent them from ever slipping. The Slattery Stem also utilises the STC (Shark Tooth Clamping) system, which allows the knurling on the bar to bite into the stem even harder and keep them in place, even after the burliest of drops or big gaps. ###section### Product Specs TYPE: Top Load REACH: 51mm RISE: 30mm CLAMPING DIAMETER: 25.4mm WEIGHT: 367g/12.9oz
Introducing the Metra stem from Eclat. Using full CNC machining, Features include; STC (Shark tooth Clamping) for additional handlebar clamping strength, unique offset rear for improved clamping, CNC machining under the stem to reduce weight ###section### Product Specs TYPE: Top Load REACH: 51mm RISE: 30mm CLAMPING DIAMETER: 22.2mm WEIGHT: 367g
Slim, low profile Pure seatpost clamp from Eclat featuring 6061-T6 alloy, forged and CNC machined. 28.6MM ID and 6mm hex bolt.
The Seismic Cassette Hub utilises a unique internal mechanism, which Eclat worked on for the past few years called TCS (Toothed Coupling System). Inspired by systems used on high-end road and mountain bikes, they managed to re-design this system to work inside a BMX cassette hub with a 14mm axle and a 9t driver, something which was never thought possible until now. Instead of the typical pawl based cassette hub, the Seismic hub uses 2 coupled toothed ratchet rings, which are inside the hub and the driver. The 2 rings are pushed together with a very special design of spring, which allows the hub to transfer power in one direction, and “freewheel” in the other. In a nutshell, it’s a much stronger internal mechanism, which can’t fail even after years of heavy use. No more skipping, slipping or popping, you can really crank this thing as hard you want and it’s not going to fail. Even after years of heavy use, this hub was designed to keep going on and on. The Seismic is laced to Eclat's E440 rim. Lightweight at just 440g with a strong double walled design, The Eclat E440 has the edge over the competition. The tall profile provides rigidity while the straight side walls provide added assistance if you're running brakes. ###section### Product Specs WHEEL SIZE:20" HUB:Eclat Seismic AXLE:14mm Male DRIVE SIDE:Right Side Drive RIM:Eclat E440 SPOKES:Stainless Steel NIPPLES:Brass WEIGHT:TBC
For the Seismic front hub, Eclat based the internals and spec from the super popular Cortex front hub and updated the shell to match the Seismic rear cassette, Also the Female bolts have been increased to 35mm for better use with pegs. The Seismic is laced to Eclat's E440 rim. Lightweight at just 440g with a strong double walled design, The Eclat E440 has the edge over the competition. The tall profile provides rigidity while the straight side walls provide added assistance if you're running brakes. ###section### Product Specs WHEEL SIZE: 20" HUB: Eclat Seismic AXLE: 10mm Female RIM: Eclat E440 SPOKES: Stainless Steel NIPPLES: Brass WEIGHT: TBC
Complete Pulse LHD/RHD switch drive Cassette Wheel from Eclat. Assembled using the classic Pulse Cassette hub laced onto the Raven welded joint rim. ###section### Product Specs WHEEL SIZE:20" HUB:Eclat Pulse Cassette AXLE:14mm Chromoly Male DRIVE SIDE:Left & Right Switchable RIM:Eclat Raven Welded SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:1328g / 50.38oz
A modern day street peg with everything you need, and nothing that you dont. The Dura peg was deisgend to meet the demands of Eclat's team riders that like to put their pegs to war in the streets. Made 4130 heat treated Chromoly, the Dura peg fetaures a thicker 3.5mm end to give you plenty of peg to grind on during crooked grinds and hard spins. Simple CNC weight savings on the base save a few grams and a super slick ED coating keeps you sliding. Please note: The Eclat Dura Peg is sold individually. ###section### Product Specs LENGTH: 4.5" (114mm) DIAMETER: 36mm MATERIAL: Metal AXLE SIZE: 14mm PACK SIZE: 1 (Single) WEIGHT: 196g (6.91oz)
The Felix Prangenberg signature Eclat tyre has been in the works for a while now, ensuring that it can withstand his 24/7 riding regime. It is nothing short of a technical masterpiece. Combining the advanced technology and materials of the Eclat Mirage tyre and the aggressive tread and larger size of the Morrow tyre to creat what is easily one of the most advanced BMX tyres around. Manufactured by the master tyre makers at Maxxis, the Creature Tyre uses high quality 120 TPI casing and a unique fast-rolling and grippy compound tread design. ###section### Product Specs WHEEL SIZE: 20" MAX PRESSURE: TBC WEIGHT: 726g (26.8oz) PACK SIZE: Single
The Abyss sprocket use an intricate design based the high end wheels used on super cars. CNC machined from 6061-T6 alloy and is available in 25t, 26t and 28t. The RS is supplied with adaptors so it can be run on 24, 22 and 19mm spindles. The offset teeth on the sprocket help to maintain a perfect chain alignment on all set ups. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 80g
Description for Eclat Controller Oversized Bars Chrome / 9.5" Rise not available
Replacement Ratchet Internals for the Eclat Seismic hub.
Replacement driver for the Eclat Cortex cassette hub.
The Eclat Cargo Headset offers a new take on the integrated headset system. Due to the inclusion of three exclusive top caps & two 3mm spacers, the Cargo headset offers a variety of stack heights (from 7-30mm), so you can run your bars low or high, depending on your preference. Constructed of 7075-T6 CNC machined and sealed bearings.