Eclat's BIOS Seats utilise their very own custom-designed seat base for maximum strength and durability. A design two years in the making that saw the brand test their prototypes rigourously. They're an improvement over traditional pivotal seat design in terms of functionality and aesthetics, with fat padding enhancing their comfort too. This redesigned BIOS Seat comes in a load of different colours and materials. ###section### Product Specs TYPE: Pivotal PADDING: Fat WEIGHT: 388g / 11.9oz
Description for Eclat Domain 48mm Top Load Stem Black / 25.4mm not available
Eclat's Domain Stem is their latest front load design, constructed from 6061-T6 alloy and fully CNC machined for maximum durability. To keep weight down offset rear machining and maximum underside machining remove excess material to maximise weight savings without ever sacrificing strength. If you're looking for a simplistic, refined design that's not going to let you down when it matters most, go for the Domain. ###section### Product Specs TYPE: 22.2mm REACH: 50mm RISE: 8.5mm CLAMPING DIAMETER: Front Load WEIGHT: 309g (10.9oz)
The Abyss Guard Sprocket use a unique 5 spoke design with strengthened arm and subtle cutouts to reduce the weight. CNC machined from superior grade 7075-T6 alloy for increased life and is available in 25t and 28t. The Abyss is specifically designed to be compatible with every crank on the market and is supplied with sunken adaptors so it can be run on 24, 22 and 19mm spindles to maintain a perfect chain alignment on all setups. ###section### Product Specs TYPE: Guard MATERIAL: Alloy WEIGHT: 25t: 126g (4.44oz/ 0.28lbs). 28t: 154g (5.43oz/ 0.34lbs)
14g stainless steel straight gauge spokes from Eclat. Pack of 40.
The Elevate Guard Sprocket is Eclats new team designed guard sprocket, which uses the same Viper nylon fiberglass bash guard and patented interface that made theAK guard a success. One of the major design elements that has made this guard such a trustworthy and robust product, is the way that the Nylon guard is attached to the sprocket. Instead of sitting on the surface of the alloy sprocket, the Nylon guard is sunken into the structure of the sprocket and supported all the way around so that the bolt holes on the guard do not take all the impact. The high-impact, low-friction material of the guard allows you to grind and slide on the sprocket in ways that a standard alloy guard wouldn’t let you – this also opens up the possibility of a whole new world of grind combinations. ###section### Product Specs TYPE: Bolt On MATERIAL: 6061-T6 alloy, full cnc sprocket and nylon/fibreglass replaceable guard WEIGHT: 25t: 150g (5.29oz)
Eclat have taken the tri-spoke Vent sprocket and beefed it up with a 7mm thick guard making it ideal for all who like a good crank arm slide or sprocket stall. Each of the spokes are internally machined to reduce weight without compromising strength. The Vent Guard Sprocket will fit the majority of cranks on the market and uses wider spacing meaning you can run it with wide and half link chains with no issues. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: TBC
Replacement nylon guard for the AK guard sprocket. ###section### Product Specs TYPE: N/A MATERIAL: Nylon WEIGHT: TBC
The Vent is a simple and smooth looking sprocket, incorporating a unique three spoke design. Each of the spokes are internally machined to reduce weight without compromising strength. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: TBC
The crank of choice for Devon Smillie, the Onyx cranks from Eclat are the finest and the most inventive 3pc Chromoly cranks to date. They feature an oversize 24mm spindle, and a dependable 3pc design, allowing them to fit bolt bolt-drive and spline-drive sprockets. The arms, still use a super strong invest cast boss design at the spindle and pedal ends. The Onyx now feature updated the welding for improved strength. These cranks are designed to take the strain, stress and power of todays most fierce riders. ###section### Product Specs Crank Type:3pc Spindle Diameter:24mm Includes BB:No Weight:840g / 29.65oz ###shogun-image-section###
The Sniper is sleek looking, using cold-forged 6066-T6 alloy and utilizing all the modern elements from previous levers. One of the main differences with the lever is the attention to detail eclat put into the barrel joint, in the past levers have always suffered here with over tightening and threading. eclat use stronger cromoly in this area so alignment is never compromised while tightening the barrel.
The Wave 22 Headset is simplicity at it’s finest. Including a tall-stack 22mm topcap and x2 3mm spacers, this sleek looking headset allows you to dial in your front end with no fuss.
130cm linear cable from Eclat with 1.5mm thick steel wire with 2 end nipples included.
Eclat have oversized their popular Cortex hub, throwing in larger bearings usually found in their rear hubs to give the hub a smoother ride with less resistance. Using the same design as it's predecessor the Cortex OS is built for riders who want unrivalled durability and performance. The larger bearings are designed to keep on rolling smooth even after years of heavy abuse, capable of taking much harder impacts too they're built to go hard. The Cortex OS features a longer 35mm bolt to accomodate plastic pegs and to give a stronger female bolt setup. ###section### Product Specs AXLE SIZE: Female SPOKE HOLES: 36h BEARINGS: Sealed oversized 32mm bearings WEIGHT: 386g (13.6oz)
BMX Handlebars from Eclat. The Dive bars are made from full liquid post heat-treated seamless 4130 crmo. They are available in two rises; a 8.6 and a larger 8.9 both with a flatter 10 backsweep. ###section### Product Specs Rise: Multiple Options Width: 29.5" Up Sweep: 2 ° Backsweep: 12 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 771g / 1.7lbs ###section### ###shogun-image-section###
The 8-sided profile of the Octa Grip is based around simple ergonomics. The inside shape of a closed human hand gripping the bar is not perfectly round, so by using a slightly shaped grip profile Eclat were able to create a grip which simply fits to the shape of your hand, ensuring a more secure and comfortable hold on the bars. ###section### Product Specs DIAMETER: 30mm LENGTH: 170mm PACK SIZE: 2 (Pair)
The Overguard is a universal hub guard. Designed to fit the majority of hubs, pegs and frames/forks on the market. This injection molded Nylon/Fibreglass version is the perfect balance between price and durability.
Eclat's Vapour Tyre is a take on the classic "dirt tyre", after working closely with Tyson Jones-Peni, Dylan Lewis and other riders on the team they've created new tyre that's smooth on trails and runs fast in the bowl. Featuring cobweb technology for superior strength, a specialised race compound rubber with a fast-rolling center section and a unique multi-textured tread pattern providing superior grip on all surfaces. Max pressure rating: 100psi "###section### Product Specs WHEEL SIZE: 20" MAX PRESSURE: 100 PSI PACK SIZE: Single WEIGHT: 2.4" - 698g (24.5oz) 2.25" - 664g (23.4oz) "
The Eclat Exile Pivotal Seat uses their custom-designed Pivotal base seat for maximum strength and durability and paired it with a retro-inspired ergonomic seat shape. Designed together with Aussie trail/bowl legend, Tyson Jones-Peni, the Exile Pivotal Seat boasts classic styling with one of the strongest pivotal seat bases in the game. ###section### Product Specs TYPE: Pivotal PADDING: Slim WEIGHT: 275g (9.7oz)