The eclat pulse driver was made for their homemade eclat pulse hub. Equipped with sb bearings you are on the right side with this strong driver made by Eclat.
Eclat have taken the tri-spoke Vent sprocket and beefed it up with a 7mm thick guard making it ideal for all who like a good crank arm slide or sprocket stall. Each of the spokes are internally machined to reduce weight without compromising strength. The Vent Guard Sprocket will fit the majority of cranks on the market and uses wider spacing meaning you can run it with wide and half link chains with no issues. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: TBC
Introducing the Metra stem from Eclat. Using full CNC machining, Features include; STC (Shark tooth Clamping) for additional handlebar clamping strength, unique offset rear for improved clamping, CNC machining under the stem to reduce weight ###section### Product Specs TYPE: Top Load REACH: 51mm RISE: 30mm CLAMPING DIAMETER: 25.4mm WEIGHT: 367g
The Eclat Unit U-brake is a low-profile designed brake, constructed from 6066 forged alloy, and comes equipped with eclat's brake hardware. The Unit's straightforward design allows for precise fine-tuning.
Double walled rim from Eclat. The Bondi straight wall rim features a unique broad design which spreads the impact load of severe landings more thoroughly, meaning you get a longer-lasting rim. It’s lightweight, functional and it’s made with lots of love. Constructed of 6066-T6 alloy and flash welded for strength ###section### Product Specs WHEEL SIZE: 20" SEAM: Welded ERD: 389mm HEIGHT: 17mm WIDTH: 36mm SPOKE HOLES: 36h WEIGHT: 538g / 18.9oz
Eclat Worked on a new front hub and based the internals and spec from the super popular Cortex front hub but have updated the shell to match the Seismic rear cassette, Also the Female bolts have been increased to 35mm for better use with pegs. ###section### Product Specs AXLE SIZE: Female SPOKE HOLES: 36h BEARINGS: Sealed WEIGHT: 302g / 10.65oz
The Domain Topload stem follows the clean simple lines of it’s frontload brother. Constructed of 6061-T6 alloy, the Domain stem is fully CNC machined, featuring a 52mm reach, taller 34mm rise, offset rear machining for improved clamping and internal machining to remove excess material for additional weight savings. With an overall simpler design, wider faceplate, and larger head 6mm hex bolts, if you’re looking for a clean and refined topload stem that won’t let you down, you’ve found it. ###section### Product Specs TYPE: Top Load REACH: 52mm RISE: 34mm CLAMPING DIAMETER: 22.2mm WEIGHT: 309g
The Domain Topload stem follows the clean simple lines of it’s frontload brother. Constructed of 6061-T6 alloy, the Domain stem is fully CNC machined, featuring a 52mm reach, taller 34mm rise, offset rear machining for improved clamping and internal machining to remove excess material for additional weight savings. With an overall simpler design, wider faceplate, and larger head 6mm hex bolts, if you’re looking for a clean and refined topload stem that won’t let you down, you’ve found it. ###section### Product Specs TYPE: Top Load REACH: 52mm RISE: 34mm CLAMPING DIAMETER: 25.4mm WEIGHT: 309g
Lightweight at just 440g with a strong double walled design, The Eclat E440 has the edge over the competition. The tall profile provides rigidity while the straight side walls provide added assistance if you're running brakes. ###section### Product Specs WHEEL SIZE: 20" SEAM: Welded ERD: TBC HEIGHT: 16mm WIDTH: 34mm SPOKE HOLES: 36 WEIGHT: 440g
Ty Morrow's signature handlebars from Eclat. The Morrow bars are made from full liquid post heat-treated seamless 4130 crmo. They feature a 10" rise. Over sized 1 tube at stem clamping area, must be used with an Oversized stem. ###section### Product Specs Rise: 10" Width: 30.15" Up Sweep: 3 ° Backsweep: 11 ° Bar Clamping Diameter: 25.4mm Bar Type: 2pc Weight: 312g / 0.68lbs ###section### ###shogun-image-section###
Jordan Godwin signature oversized handlebars from Eclat. The Chocolate bars are made from full liquid post heat-treated seamless 4130 crmo. Available in 9" rise. ###section### Product Specs Rise: Multiple Options Width: 27.75" Up Sweep: 1.5 ° Backsweep: 12 ° Bar Clamping Diameter: 25.4mm Bar Type: 2pc Weight: 860g / 1.89lbs ###section### ###shogun-image-section###
The Strangler Bar utilises oversize 25.4mm tubing near the clamping area to make it outlast anything you can throw at it. The increased 25.4mm diameter tube where the stem clamps the bar allows the bar to be clamped much more securely than the traditional 22.2mm tubing found on most bars and stems. The Strangler bar combines the bigger 25.4mm clamping area with a matching 25.4mm griptube that then tapers back to a regular 22.2mm tube further up the bar. PLEASE NOTE: This handlebar must be used with a 25.4mm bore stem (check out Eclats Slattery 25.4mm stem) and will not be compatible with a traditional 22.2mm stem. Rise: 9.1" ###section### Product Specs Rise: Multiple Options Width: 29" Up Sweep: 2.5 ° Backsweep: 12 ° Bar Clamping Diameter: 25.4mm Bar Type: 4pc Weight: 1130g / 2.49lbs ###section### ###shogun-image-section###
Description for Eclat Domain 48mm Top Load Stem Black / 25.4mm not available
Eclat's Domain Stem is their latest front load design, constructed from 6061-T6 alloy and fully CNC machined for maximum durability. To keep weight down offset rear machining and maximum underside machining remove excess material to maximise weight savings without ever sacrificing strength. If you're looking for a simplistic, refined design that's not going to let you down when it matters most, go for the Domain. ###section### Product Specs TYPE: 22.2mm REACH: 50mm RISE: 8.5mm CLAMPING DIAMETER: Front Load WEIGHT: 309g (10.9oz)
The Abyss Guard Sprocket use a unique 5 spoke design with strengthened arm and subtle cutouts to reduce the weight. CNC machined from superior grade 7075-T6 alloy for increased life and is available in 25t and 28t. The Abyss is specifically designed to be compatible with every crank on the market and is supplied with sunken adaptors so it can be run on 24, 22 and 19mm spindles to maintain a perfect chain alignment on all setups. ###section### Product Specs TYPE: Guard MATERIAL: Alloy WEIGHT: 25t: 126g (4.44oz/ 0.28lbs). 28t: 154g (5.43oz/ 0.34lbs)
Eclat have oversized their popular Cortex hub, throwing in larger bearings usually found in their rear hubs to give the hub a smoother ride with less resistance. Using the same design as it's predecessor the Cortex OS is built for riders who want unrivalled durability and performance. The larger bearings are designed to keep on rolling smooth even after years of heavy abuse, capable of taking much harder impacts too they're built to go hard. The Cortex OS features a longer 35mm bolt to accomodate plastic pegs and to give a stronger female bolt setup. ###section### Product Specs AXLE SIZE: Female SPOKE HOLES: 36h BEARINGS: Sealed oversized 32mm bearings WEIGHT: 386g (13.6oz)
When Eclat came to designing its first four-piece handlebar, they really wanted to go back to the drawing board and address all the annoying issues that four piece bars have always notoriously suffered from. With larger diameter top bend for cleaner look and more resistance to bending, larger tubing at welds solves the common issue of 4pc bar fatigue by greatly increasing contact area at weld. Available in a 10" Rise. ###section### Product Specs Rise: Multiple Options Width: 30" Up Sweep: 2.5 ° Backsweep: 12 ° Bar Clamping Diameter: 22.2mm Bar Type: 4pc Weight: 1139g / 2.5lbs ###section### ###shogun-image-section###
The Eclat Jungleo track jacket is ideal as a light jacket for mild spring and autumn days. In addition, the Eclat Jungleo track jacket is water-repellent and has an eclat design on the front and back. The side pockets, which can be closed with zippers, offer space for keys and wallet.
Ty Morrows signature handlebars from Eclat. The Morrow bars are made from full liquid post heat-treated seamless 4130 crmo. They feature a 10 rise and a 11 degree backsweep. ###section### Product Specs Rise: 10" Width: 30.15" Up Sweep: 3 ° Backsweep: 11 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 312g / 0.68lbs ###section### ###shogun-image-section###
Description for Eclat Controller Oversized Bars Chrome / 9.5" Rise not available