For many years DT Swiss eschewed offering a carbon Enduro wheel for a simple reason; their alloy wheels were just so good that there was no sound engineering logic for offering a more costly option that offered limited advantages over DT's renowned Spline 1. However, with years of in-house carbon manufacturing and research now behind them, DT have now applied this experience to create a carbon wheel set that stands above all previous offerings. The new generation of 2.5 and 2.6 inch Enduro tyres demand ever wider rims whilst maintaining a level of impact resistance that is simply not possible in alloy without a huge weight penalty, enter the 35 mm EXC 1200. The EXC is by far the strongest carbon rim DT have ever made, with continuous strand lay-up construction for enhanced impact resistance, designed by DT, made by DT and tested to destruction by DT at their test lab in Biel, Switzerland, no open moulds here. The 180 hubs feature SiNC ceramic bearings and DT's cutting edge, Ratchet EXP system, an evolution of the original twin ratchet, the ratchet EXP integrates the inner ratchet into the hub, allowing wider bearing spacing, fewer moving parts and more precise alignment. The resulting hubs are even more durable and reliable than our classic ratchet 240's but stiffer and significantly lighter with the fast rolling benefits of Ceramic bearings Using these hubs and rims the EXC's able to offer a super tough 35 mm 27.5 Enduro race wheel system that weighs a ground-breaking 1,700 grams a pair. A blend of DT's premium straight pull Aero Comp and Aerolite spokes offers an optimum blend of stiffness, comfort and low weight. Rear wheels include both Shimano MICRO SPLINE and SRAM XD freewheels for easy conversion Maximum recommended system weight: 130 KG Colour: Black Discipline: MTB Hub Width: 110mm Wheel Diameter: 27.5 inches Product Type: Front Wheels
The low weight of the especially for all mountain usage engineered rim paired with the latest evolution of DT Swiss 240 hub with Ratchet EXP freehub make the XMC 1501 Spline One the perfect partner in crime for all different kind of mountain adventures. Due to the 30 mm inner width of the tubeless optimized carbon rim, wide tires are ideally supported. Double butted competition race spokes and the perfect DT Swiss build quality are rounding the XMC 1501 Spline One off. Features Material: Carbon. Rim type: Clincher. Inner width: 30 mm. Outer width: 36 mm. Recommended system weight max.: 120 kg. Decal type: Waterslide. Hub Type: DT Swiss 240. Built-in dimension: 110 mm boost (front) / 148 mm boost (rear). Freehub body: SRAM XD MTB (ASRAM) Freehub system: Ratchet EXP 36 Nipples: DT ProLock Squorx ProHead alu Spokes: DT competition® race straightp Spoke pattern: 3-cross (1:1) Real Weight: 778 g (front) / 870 g (rear). ASTM classification: 4. Technologies Tubeless Tubeless ready DT Swiss rims have further advantages over conventional rims. The design of their cross section allows for the tyre to easily pop in place when inflated, and more often than not a standard floor pump is all that‘s needed. Also the elaborate profile of DT Swiss rims ensures a precise and safe fit of the tyre even when ridden hard. Ratchet exp Simple maintenance: DT Swiss hubs are also known for the no tool technology. DT Swiss also found a way to further improve this system and make maintenance even simpler, by a small change of the endcaps. Freehub body conversion: Simplified due to easier disassembly. Less Weight: Not only the reliability improved. The fusion of ratchet and threaded ring reduces the number of single parts of the system what offers an important advantage. Less Wear: A single cylindrical spring ensures faster full engagement and thus increases reliability Superior Reliability: The full engagement of the ratchets creates a large contact surface and therefore low surface pressure that leads to superior reliability. Increased Bearing Lifetime: The integration of the bearing into the threaded ring allows the bearing distance to be maximized. The increased distance further supports the axis, which results in less deflection of the axle and thus protects the bearings and increases their lifetime. Prolock Pro Lock® is a process where a patented, dual compound, adhesive liquid is injected into the nipple thread, allowing for extremely durable wheel builds. By threading the nipple onto the spoke the adhesive is activated and starts to harden. Retruing the wheel is still possible after the adhesive has hardened completely, with only a minimal decrease of its thread-lock function. Engagement Angle A hotly discussed topic in the market right now - engagement angle! What is the engagement angle, how does this angle affect riding performance and is the conventional wisdom the more the better really always better? The engagement angle is the maximum degree that the freehub body can rotate until the teeth of the freewheel system engage and accelerate the hub. This angle is calculated by dividing 360º by the number of engagement points of the freewheel system. DT Swiss still believe that a system with 36 points of engagement represents the best optimization within this three dimensional perspective in terms of reliability, weight and points of engagement. Spline DT Swiss’s classic straight pull system, a great balance between stiffness, comfort, low weight and easy serviceability, ideal for everyday road or mixed terrain use and uses readily available standard straight-pull spokes. Included Tubeless tape 32 mm. x2 TL valve alu black 18-25 mm. x2 IS 6-bolt adapter MTB. Shimano Micro Spline freehub kit .
Product features Use: All Mountain Model: XMC 1501 Spline One Wheel size: 27,5 Rim diameter: 584mm Rim type: Clincher Tubeless ready: ✔ Inner width: 30mm Outer width: 36mm o Axle system: Boost 12/148mm (Thru Axle) Hub Type: 240 Straightpull hub Freehub: NEW Ratchet EXP 36 System Freehub Body: SRAM XD Driver (ASRAM) pre-installed Rim: Carbon, hookless bead, UD finish Spokes: DT Competition Race® straightpull (black) Nipples: DT ProLock® Squorx ProHead (black) Holes/Spokes: 28 Lacing: 3-cross (1:1) Valve hole: Presta / SV Ø 6.5 mm Disc Mount: Center Lock incl. IS 6-bolt adapter MTB Recommended system weight max: 120kg (body weight + bike + equipment) Weight: 827g Material Rim: Carbon Hub: Aluminum Spoke: 18/10 Stainless steel Nipple: Aluminum Freehub body: Aluminum Technologies Wider width More width than ever: 30mm inner width mean less rolling resistance. Cross Country wheels are ideal for fast racing, therefore it’s necessary to minimise resistance wherever possible. On a rough surface, rolling resistance can make up to 69% of the total resistance. SPEED = ENERGY / INTERTIA MOMENT + ROLLING RESISTANCE + GRADE RESISTANCE + DRAG Rolling resistance is defined as: rolling resistance coefficient x weight x gravitational acceleration. The coefficient is defined by wheel size, tyre section, tyre characteristics, tyre pressure, tread and soil. While most of those factors are hardly influenced by the wheel, DT Swiss modified the tyre support. A wider rim provides improved tyre support which offers lower tyre pressure and leads to less rolling resistance on rough tracks. Weight-to-Durability — Optimized Carbon Layup The low weight of the XMC 1501 SPLINE® ONE reduces the moment of inertia, allowing a higher speed with the same amount of energy compared to aluminium wheels. The low moment of inertia saves energy on ascents and allows for more fun on descents. The impact resistance of XMC carbon rims lies in between the EXC and XRC. The XMC 1501 SPLINE® ONE is classified as ASTM Category 4 with a maximum system weight of 120kg, which represents the use of components in rough terrain. 240 Straightpull + EXP Hub — DT Swiss Hub Technology Lighter, stiffer, more precise and even easier to maintain than its predecessor: The 240 Straightpull hub is a must for 1501 SPLINE® ONE wheels. In the rear the RATCHET EXP free hub system, which comes with 36 points of engagement, transfers the power directly to the underground and is more durable than ever. DT Swiss hubs have earned their legendary reputation for quality and performance. There are multiple features that make this product a winner: The Ratchet System® driver mechanism is extremely durable, reliable and can be serviced without special tools in minutes, thanks to its simple press fit assembly. The press fit assembly also allows all hubs to work in almost any currently existing axle configuration, making them compatible with almost every bike. The contact free seals and high precision build guarantee smooth bearings; every bit of the rider’s energy is transformed into forward momentum. These features and the super lightweight design of all the hub parts highlights the racing legacy of this classic hub. SPLINE® Technology With their intricately machined hub shells, cleverly positioned spokes and proven freewheel technology, DT Swiss SPLINE® wheels are engineered with modern riding needs in mind. SPLINE® allows riders to go faster and further, ultimately making the cycling experience even more fun.The combination of high attention to detail and the legendary DT Swiss reliability featured with SPLINE® will make you smile ride after ride, year after year. Straightpull Technology The term Straightpull refers to spokes with no bend at the head. This design allows for an ideal strength to weight ratio when compared to conventional spokes. Due to their more precise alignment and direct trajectory, straight-pull spoke technology creates a stiffer, more responsive wheel.
The ARC 1400 DICUT wheels represent the latest generation of the 1400 range from DT Swiss and its aerodynamic partners SWISS SIDE. AERO + profile rims achieve minimal aerodynamic drag at various crosswind angles, setting a new standard for performance. Thanks to its sail effect, you will gain momentum to benefit from crosswind conditions. The lower incidence of the wind allows the rider to maintain a stable aerodynamic position and full control of the bike. Aerodynamic DT Swiss spokes together with the lightweight 240 DICUT hub with Ratchet EXP system for direct hitch complete this top-level wheel. The ARC 1400 DICUT 50 is a set of low profile aerodynamic wheels to take full advantage of your pedaling power on those complicated and aggressive routes. Specification - Net weight 836 g - Recommended maximum weight 110 kg - Wheel diameter - 29 / 700C - Rim height - 50 mm - Inside rim width - 20 mm - Outer rim width - 27 mm - Axle system - 12mm Thru Axle - Installation width - 142 mm - Brake system - Disc Center Lock
Ever fancied riding your road bike to its full potential? All you need to do is slot a pair of E 1800 SPLINE 23 in its dropouts. Whether you want to cap some minutes off your commute by taking new shortcuts, cornering harder and hitting apex's more precisely or undertake some epic rides into unknown terrain, it will allow all of that. With a precision build and high-end components throughout it's the right wheel to find new road sand ride old ones like never before. Product details: Material: Aluminum Brake interface: Disc Center Lock Rim type: Clincher Rim diameter: 622 mm (29 / 700C) Rim height: 23 mm Inner width: 20 mm Outer width: 24 mm Decal type: Hub vinyl / Rim waterslide Hub type: 370 Nipples: DT ProLock Squorx ProHead alu Axle system: 12 mm Thru axle Spokes: DT AERO COMP WIDE STRAIGHTPULL Spoke pattern: 2-cross (1:1) Recommended system weight max.: 120 kg ASTM classification: 2
A combination of DT's renowned multi World Championship, World Cup and EWS winning EX 511 rims with the workhorse 350 ratchet hubs makes the EX 1700 the perfect, long term wheel investment for regular gravity riding At the heart of the rear hub sits DT's Swiss-made 36-tooth SL ratchet, offering a 10 degree engagement angle; the optimum balance of rapid engagement, low pedal kickback and long-term reliability 30 mm internal width gives an ideal platform for current 2.3 - 2.5 inch tyres without adding unnecessary weight As with all DT's E-rated Enduro rims, DT's custom extrusions beef up the edge of the rim to better resist rock-strikes whilst still minimising unnecessary bulk in less heavily loaded areas of the rim's structure, PHR system nipples remove stress risers and improve overall wheel stiffness; just 2 reasons why these rims have become the default choice for aggressive riders worldwide With a weight per pair of 1886 grams in 27.5 and just 1978 grams in 29 the EX 1700's offer a careful balance of durability and low weight for the climb back up As one of the few manufactures of hubs, rims and spokes, the DT 1700's hubs and rims are designed from the ground up for DT's widely available straight pull, butted Competition spokes and designed as a system to offer superlative ride quality 350 hubs offer assured excellent durability and wide freehub compatibility along with easy, tool-free servicing When bought as a pair they will include tubeless rim tape and tubeless valves Maximum recommended system weight: 130 KG
The Conquerors of Kona; the first generation ARC's were 3-times gold medal winners, victorious at the 2017, 2018 and 2019 Triathlon World Championships Developments in disc brake and tyre technology have meant that even the best needed to evolve to take advantage of the latest tyre technology and the frames able to accept them For the past 3 years, working with their aerodynamic R&D partners Swissside DT, have been continuously testing the latest generation of disc brake specific aerodynamic rims, hubs and spokes The result is a family of new, 20 mm wide (internal) rim profiles optimised for 25-28c tubeless tyres that have been proven by extensive lab and real world testing to enable lower rolling resistance and improved crosswind handling whilst achieving incremental reductions in drag, even over the original ARC designs As the leading hub engineering force on cycling, DT continue to push the boundaries of what can be expected from a racing hub, the new DICUT 180 with 36 tooth Ratchet EXP is the lightest, simplest, lowest drag road disc hub DT have ever made and still just as reliable and easy to service as the legendary 240 DT and Swissside's continuing leading-edge research into rotational drag and its effect on performance has lead to new, narrower Aerolite II and Aerocomp II spokes, unique to the ARC's these are what you can do when you design and make every part of the wheel and squeeze even more performance out of the system without the unproven reliability of less durable materials The front wheel comes ready for 12 x 100 mm thru axles, rear comes ready for 12 x 142 mm thru axles Maximum recommended system weight: 110 KG When bought as a pair they will include both Shimano Road and SRAM XDR freehubs, rim tape and lightweight tubeless valves Weights by rim depth: 80 mm: 1,820 grams a pair, 62 mm: 162 grams a pair, 50 mm: 1520 grams a pair
Your faithful companion for big days out in the back of beyond; the M 1900's have long been the wheel of choice for those looking for dependable trail wheels at a reasonable price and now, with an upgrade to Star Ratchet internals the bar has risen even higher. DT are the original ratchet hub innovators and over the past 20 years their Star Ratchet system has become the gold standard for reliability, simplicity and ease of servicing, now this industry-leading tech comes to the 1900 range to offer unparalleled quality in an entry level wheel. The 30mm wide M 502 sleeve-joined rims are the budget version of DT's renowned XM 481's and pass the same durability tests with only a slight weight penalty. Hand built in Europe to the highest possible standards for long-term reliability and a tight, responsive ride feel. New all black spoke nipples and rim eyelets for a classy, understated and corrosion-resistant finish. The custom-designed straight pull centre lock hubs share many of the features found in DT's top-end wheelsets and offer load optimised spoke beds to ensure perfect alignment and maximum rigidity. As one of the few manufacturers of hubs, rims and spokes, the 1900's hubs and rims are designed from the ground up for DT's straight pull, Champion spokes. When bought as a pair they will include 6-bolt rotor adaptors, tubeless rim tape and tubeless valves Weight: from 1894 grams a pair Maximum recommended system weight: 120 KG
With a mid-depth, aerodynamic, full carbon rim, reliable and strong hubs and a sturdy build, the DT Swiss ARC 1400 DICUT 62mm Disc Brake Wheelset is the perfect choice when versatility is needed for riding over moderate climbs and along fast valleys. The rims are realised in a refined grade of carbon fibre that infuses reactivity into any ride thanks to its low weight and high lateral rigidity. This carbon material is formed into a 62mm deep rim profile that has been honed in the wind tunnel via input from aerodynamic experts SWISS SIDE to be fast and stable through a full sweep of riding scenarios. The rims' aerodynamic prowess is complemented by their broad, 20mm internal widths that help to lower rolling resistance and improve ride comfort by better supporting the sidewalls of tubeless-ready or standard clincher tyres. DT Swiss 240 hubs spin smoothly, and their rigid alloy hub shells improve braking performance by donating a rock-solid platform for disc rotor mounting. An EXP ratchet freehub body is integrated neatly into the rear hub, and this has a super-quick engagement system to quicken response to pedalling input. The hubs are linked to the rims by the bladed Aero Comp spokes laced in sturdy two-cross patterns. Highlights Aerodynamic but stable, this wheelset is a versatile all-rounder for riding over mixed topography Lightweight and torsionally stiff full carbon rim 62mm deep AERO+ rim profile is aerodynamically tuned in cooperation with SWISS SIDE 27mm external rim width reduces air turbulence at the tyre-to-rim interface Broad 20mm internal rim width lowers rolling resistance and improves comfort Hooked internal rim format is compatible with tubeless-ready or standard clincher tyres DT Swiss 240 hubs are light and torsionally stiff for better braking EXP ratchet freehub offers near-instant engagement DT Swiss aero comp spokes lower drag and are reliable Features Tyre compatibility: Tubeless-ready clincher or standard clincher Wheel size: 700c Rim: Full carbon Rim profile: AERO+ Rim finish: Naked carbon with waterslide decals Rim depth: 62mm Internal rim width: 20mm Rim internal format: Hooked External rim width: 27mm Spokes: DT Aero Comp T-head Spoke count: Front - 24 / Rear - 24 Spoke lacing pattern: Front - two-cross / Rear - two-cross Hubs: Front - DT Swiss 240 disc brake / Rear - DT Swiss 240 disc brake with EXP 36 freehub Bearings: Stainless steel Freehub compatibility: Shimano HG/SRAM Road 11-speed (SRAM XDR Road freehub body included as a spare) Brake compatibility: Disc Center Lock Front axle: 12mm x 100mm thru-axle compatible Rear axle: 12mm x 142mm thru-axle compatible Recommended tyre size: 23mm and above Maximum tyre pressure: Depends on tyre type and width - please refer to the user guide Maximum recommended system weight: 110kg (including rider, bike and any luggage) Manufacturer claimed weight: Front - 817 grams / Rear - 936 grams / Wheelset - 1753 grams
A combination of DT's renowned multi World Championship, World Cup and EWS winning EX 511 rims with the workhorse 350 ratchet hubs makes the EX 1700 the perfect, long term wheel investment for regular gravity riding At the heart of the rear hub sits DT's Swiss-made 36-tooth SL ratchet, offering a 10 degree engagement angle; the optimum balance of rapid engagement, low pedal kickback and long-term reliability 30 mm internal width gives an ideal platform for current 2.3 - 2.5 inch tyres without adding unnecessary weight As with all DT's E-rated Enduro rims, DT's custom extrusions beef up the edge of the rim to better resist rock-strikes whilst still minimising unnecessary bulk in less heavily loaded areas of the rim's structure, PHR system nipples remove stress risers and improve overall wheel stiffness; just 2 reasons why these rims have become the default choice for aggressive riders worldwide With a weight per pair of 1886 grams in 27.5 and just 1978 grams in 29 the EX 1700's offer a careful balance of durability and low weight for the climb back up As one of the few manufactures of hubs, rims and spokes, the DT 1700's hubs and rims are designed from the ground up for DT's widely available straight pull, butted Competition spokes and designed as a system to offer superlative ride quality 350 hubs offer assured excellent durability and wide freehub compatibility along with easy, tool-free servicing When bought as a pair they will include tubeless rim tape and tubeless valves Maximum recommended system weight: 130 KG
The DT Competition is the classic lightweight spoke used by most of the world's best wheel builders, perfect for all round use and now in a distinctive white finish. The 14 / 15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the end where strength is needed, the butting process even adds strength through cold forging. DT Competition spokes are made from X5 stainless steel, containing chrome for rust resistance and nickel for strength. The rolling of the nipple thread removes no metal from the spoke and preserves the grain of the material, further adding to the overall strength.Supplied Individually and without nipplesWeight: 6 grams for 64 x 264 mm length spoke (single spoke supplied)
The DT Competition is the classic lightweight spoke used by most of the world's best wheel builders, perfect for all round use and now in a distinctive white finish. The 14 / 15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the end where strength is needed, the butting process even adds strength through cold forging. DT Competition spokes are made from X5 stainless steel, containing chrome for rust resistance and nickel for strength. The rolling of the nipple thread removes no metal from the spoke and preserves the grain of the material, further adding to the overall strength.Supplied Individually and without nipplesWeight: 6 grams for 64 x 264 mm length spoke (single spoke supplied)
The DT Competition is the classic lightweight spoke used by most of the world's best wheel builders, perfect for all round use and now in a distinctive white finish. The 14 / 15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the end where strength is needed, the butting process even adds strength through cold forging. DT Competition spokes are made from X5 stainless steel, containing chrome for rust resistance and nickel for strength. The rolling of the nipple thread removes no metal from the spoke and preserves the grain of the material, further adding to the overall strength.Supplied Individually and without nipplesWeight: 6 grams for 64 x 264 mm length spoke (single spoke supplied)
The DT Competition is the classic lightweight spoke used by most of the world's best wheel builders, perfect for all round use and now in a distinctive white finish. The 14 / 15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the end where strength is needed, the butting process even adds strength through cold forging. DT Competition spokes are made from X5 stainless steel, containing chrome for rust resistance and nickel for strength. The rolling of the nipple thread removes no metal from the spoke and preserves the grain of the material, further adding to the overall strength.Supplied Individually and without nipplesWeight: 6 grams for 64 x 264 mm length spoke (single spoke supplied)
The PR 1400 Dicut 21 is the benchmark by which all other disc brake road wheels are measured. Weighing in a feathery 1470g for the pair, the RR21 features a superlight but still wide 18mm internal rim as a starting point and the wheels are tied together with the best components available, with DT Swiss Aerolite spokes and hub internals lifted from the legendary 240s. Combine all this and what you are left with is a stunning piece of precision Swiss engineering. Sophisticated waterslide graphics ensure they stay looking great to.A truly stunning wheel, the PR 1400 brings lightweight wheels to the world of disc brake road bikes, offering superb all weather performance while offering all the up to date features a tech savvy rider can ask for.Superlight disc brake road race wheelUnderstated design & legendary DT Swiss build qualityTubeless ready 18mm (Internal), 21mm (Height) aluminium rim12x100mm (Front) 12x142mm (Rear) Hub spacingDT Aerolite spokes and pro-lock aluminium nipplesHub type: 240DT Pawl system Freehub: 11 Speed Shimano/SRAM compatibleRecommended system rider weight: 120kgWeight: 665g (Front) 805g (Rear)Front wheel comes ready for 12x100mm Thru axlesRear wheel comes ready for 12x142mm Thru axles
The PR 1400 Dicut 21 is the benchmark by which all other disc brake road wheels are measured. Weighing in a feathery 1470g for the pair, the RR21 features a superlight but still wide 18mm internal rim as a starting point and the wheels are tied together with the best components available, with DT Swiss Aerolite spokes and hub internals lifted from the legendary 240s. Combine all this and what you are left with is a stunning piece of precision Swiss engineering. Sophisticated waterslide graphics ensure they stay looking great to.A truly stunning wheel, the PR 1400 brings lightweight wheels to the world of disc brake road bikes, offering superb all weather performance while offering all the up to date features a tech savvy rider can ask for.Superlight disc brake road race wheelUnderstated design & legendary DT Swiss build qualityTubeless ready 18mm (Internal), 21mm (Height) aluminium rim12x100mm (Front) 12x142mm (Rear) Hub spacingDT Aerolite spokes and pro-lock aluminium nipplesHub type: 240DT Pawl system Freehub: 11 Speed Shimano/SRAM compatibleRecommended system rider weight: 120kgWeight: 665g (Front) 805g (Rear)Front wheel comes ready for 12x100mm Thru axlesRear wheel comes ready for 12x142mm Thru axles
The DT Swiss ER 1400 Wheels is great for tarmac, gravel, tow paths, tarmac again and cobbles. The Endurance Road wheel range is their most versatile wheel range, ideal for drop-bar bikes that see a wide variety of surfaces but still need to haul ass on the Sunday morning club run.Maximum recommended system weight: 120 KGWeight: Rear: 819 gramsBrake Type: DiscColour: BlackDiscipline: RoadRim Depth: <25mmRim Type: Alloy ClincherRim Width: 20 - 25mmWheel Diameter: 700cThe ER 1400's sport a premium SBWT welded 20 mm internal width rim, optimised for 25- 32 mm tyres, making them able to cover a huge variety of roles as required. Utilising DT's premium DICUT hub and spoke system the ER's are a wide, all round premium alloy wheelset that weighs just 1493 grams with industry leading stiffnes to weight ratios. Legendary reliable 240 hub internals with an upgraded 36-tooth SL ratchet for lightning fast engagement. A carefully chosen blend of Aerolite and Aerocomp straight pull spokes offer a great blend of strength, speed and comfort and for those looking to use the latest tyre tech the ER 1400's come tubeless ready but can also be used with standard clinchers. The rear comes ready for 12 x 142 mm thru axles.
Riders known for being hard on their wheels, for not avoiding potholes and for out sprinting people in full pro kit on their way to do the groceries should take a close look at the ER 1600 Spline 32. A high-end welded aluminium rim with a huge cross section laced to wide aero spokes leave you with nothing left to desire. And don't be fooled by the classy looks and a silky smooth Ratchet System hub, because the ER 1600 Spline 32 really is all about hard riding and reacting to power coming from the strongest calves.The E 1600's sport a 20mm internal width rim, optimised for 25- 35 mm tyres, making them able to cover a huge variety of roles as required. The front wheel comes ready for 12x100 mm thru axles with adaptors for 15x100, the rear comes ready for 12x142 mm thru axles. Quite easy to define the ER 1600 Spline wheels isn't it A lightweight rim, strong spokes and reliable hub technology. The perfect choice for every challenge out there - especially those which you do not foresee when leaving the house for a ride.Versatile wheel range Suitable for a variety of surfaces12x100mm (Front) 12x142mm (Rear) hub spacingTubeless ready 20mm (Internal), 32mm (Height) aluminium rimBrake interface: Disc centre lockSpokes: DT Aero Comp straight pullHub type: 350Recommended system rider weight: 130kgWeight: 819g (Front), 948g (Rear)Front includes: Tubeless ready rape, Tubeless valve,Rear includes: Tubeless ready tape, Tubeless valve
The P 1800 Spline is the perfect compromise between comfort and speed. Designed specifically for use with the new breed of wider 25-30mm tyres, the P 1800 combines an 18mm internal width, tubeless ready rim with lower tyres pressures to ensure you are never left wanting for comfort, with the added benefit of more grip in all conditions.Wide 18mm ID aluminium tubeless ready rim supports wider 25-30mm tyresIncredibly smooth and durable DT Swiss 370 hubsSuitable for 12mm thru-axlesLightweight starting from 766g (front)The P 1800 Spline wheels are equipped with a 23mm high, 18mm wide ID, aluminium tubeless ready rims and DT Swiss spokes. The Aero Comp spokes are light, tough and are happy transferring the torque from even the beefiest of calves. DT's 370 hub internals are combined with a freshly optimised SPLINE hub-shell designed to improve spoke bracing and improve stiffness, the 370 3-pawl engagement system is the one of the most reliable out there.If you're interested in these then you'll almost certainly be wanting to run tubeless tyres, so you'll be glad to hear that the P 1800's come tubeless ready with tape and valves included, they can however also be used with standard clinchers. The front wheel comes ready for 12 x 100 mm thru axles, the rear comes ready for 12 x 142 mm thru axles.
The R23 Spline is the perfect upgrade for an entry level road bike or a premium winter training wheelset. At the core of this all-round wheelset lies a modern, wide and light aluminium rim. Being the foundation of the P 1800 Spline 23, it makes for a balanced width to stiffness to weight ratio. This rim is complemented by a hub featuring DT Swiss' proven pawl system freehub as well as a high-end build with bladed spokes and elaborate aluminium nipples, resulting in a wheelset that weighs a very competitive 1596g for the pair.Mid-range road wheelsUnderstated design and legendary DT Swiss build qualityTubeless ready 18mm (Internal), 23mm (Height) aluminium rimSpokes: DT Aero Comp straight pullHub type: 370DT Pawl system Freehub - 11 Speed Shimano/SRAM compatibleRecommended system rider weight: 120kgWeight: 694g (Front) 902g (Rear)Includes: Tubeless ready tape, tubeless valve and DT RWS Eco Skewers Please note: Only compatible with 11 Speed Shimano/SRAM