The most refined, lightweight trail wheels on the market, featuring DT's highly evolved Ratchet EXP system, the XMC's are our most versatile carbon MTB wheel, as happy on a back country epic as they are between the tapes. Added shoulder material gives the XMC's enhanced impact protection and a higher weight limit over the XRC's but weights still stand at a super low 1,435 grams a pair in 27.5 inch and 1,529 grams in 29 inch.Key Features:100% bespoke hookless rim design with continuous strand lay-up, designed by DT, made by DT and tested to destruction by DT at their test lab in Biel, Switzerland, no open moulds here,The 180 hubs feature SiNC ceramic bearings and DT's cutting edge, Ratchet EXP system, an evolution of the original twin HÜgi ratchet, the ratchet EXP integrates the inner ratchet into the hub, allowing wider bearing spacing, fewer moving parts and more precise alignment,The resulting hubs are even more durable and reliable than our classic ratchet 240's but stiffer and significantly lighter with the fast rolling benefits of Ceramic bearings,A blend of DT's premium straight pull Aero Comp and Aerolite spokes offers an optimum blend of stiffness, comfort and low weight,Rear wheels include both Shimano MICRO SPLINE and SRAM XD freewheels for easy conversion,When bought as a pair they will include wheels bags, 6-bolt rotor adaptors, spoke tools, tubeless rim tape and tubeless valves,Maximum recommended system weight: 120 KG.
These XC suspension forks are designed for maximum strength and control. They feature a stiff carbon crown and steerer, which has seen them competing at the World Championships and being used by pro riders such as Nino Shurter thanks to their reliable high performance. DT Swiss has equipped these forks with a number of adjustment features, which allows you to fine-tune the suspension to match your riding style as well as the terrain conditions. Adaptable Progression Tune (APT) volume adjust allows you to easily tune the fork's spring curve using internal spacers to increase or decrease its volume. If you want a plush linear fork, all you have to do is remove spacers or if you want an aggressive and progressive feel, you can simply add spacers. Spacers are available separately. Coming kitted out with One Piece Mag (OPM) lowers, this MTB fork uses DT Swiss's signature rear bridge technology to provide a stiffer structure as well as improved tyre clearance. Another highlight is it shields your seals from spray and mud build-up as you blast across unpredictable terrain conditions at speed. Designed for lightweight performance, this fork is equipped with a Negative Coil Spring (NCS) system. It adjusts automatically to your weight and reduces stiction, so you can enjoy improved comfort and front-end grip as you take on every off-road challenge. Coming complete with legendary SKF seals from Sweden fitted as standard and high-quality metal internals, this fork offers riders exceptional longevity with a fantastic service life. This means that a full service is only required approximately every 200 riding hours, so you can benefit from high-performance front-end suspension for longer. This makes it a great choice of upgrade for riders who want smoother and more dependable shock absorption wherever their ride takes them.
The DT Spline 1 has long set the standard for premium alloy MTB wheels, their renowned mix of ride quality, reliability and exceptional strength to weight ratios have made them starting line favourites and test winners all around the world.. so what next?Following extensive lab-based and real world testing DT's engineering team in Biel decided that there was really only one place to go ... carbon!So the 3rd generation Spline 1 now sports a brand new bespoke 30 mm wide carbon rim design to push DT's signature wheel system to ever greater heights and even lower weights,The bruiser of the range, the EXC was developed in the white heat of the Enduro World Series and designed for high-impact riding where you need something that can take the hits but not weigh you down on the ride back up,At the very centre of this system are the new Ratchet EXP 240 hubs the simplest, most reliable and lightest 240 hubs DT have ever made proving that DT remain the undisputed masters of ratchet technology,Ratchet EXP reduces the number of moving parts inside the hub and allows a wider bearing spacing, improving overall stiffness whilst improving bearing life and reducing drag, the hub still retains DT's easy tool-free servicing and ability to be worked on trailside if required,Further weight is saved by the new Swiss-made Comp Race spokes that are butted down to 1.6 mm, making them not only lighter, but give a more forgiving and damped ride, offsetting the added stiffness the move to a carbon rim often brings, just another benefit of designing and manufacturing the entire wheel system in house,Maximum recommended system weight: 130 KG,Weight: 27.5 inch, Front: 760 grams Rear: 849 grams 29 inch, Front: 828 grams Rear: 917 grams.
DT Swiss Arc 1100 Dicut 48mm Front WheelWith a medium-profile aero rim and a smooth-spinning DT240 hub, this Arc 1100 road wheel by DT Swiss is the ideal choice for group rides and distance races. Rolling on a 17mm internal width and featuring a 48mm depth, the carbon rim reduces drag and stays stiff and responsive on every journey. Maintaining a low weight and a sturdy shape at high speeds, this tubeless-ready road wheel gives a top-level performance from start to finish. Stiff and Powerful, Carbon Road WheelDeveloped alongside aero-wheel engineers SWISS SIDE, this aero road wheel leads you through every race with superb aerodynamics, enhanced by the DT Aerolite spokes and DT240 hub. The spokes are pulled tight through the rim by ProLock nipples, with the hub using its SINC ceramic bearings to deliver a smooth and consistent spin for improved handling and control. The DT240 also gives a firm and supportive experience on the fastest rides.The carbon rim brake surface allows for confident and reliable stopping, making the DT Swiss Arc 1100 Dicut 48mm Front Wheel a top choice for the pacy and focused road rider.Features: Rim Material: Carbon Rim Type: Clincher Internal Rim Width: 17mm External Rim Width: 25mm Rim Height: 48mm Spokes: DT AeroLite straightpull with DT ProLock hidden aluminium nipples, radial lacing Hub Type: DT240 Hub Axle Type: 100x5mm QR Tubeless-Ready: Yes Brake Standard: Rim Brake Recommended Maximum Weight: 100kg Includes: RWS Titan, Tubeless tape 19mm, Swissstop black prince, valve guard, wheel bag Weight: 686g
DT Swiss ERC 1400 SP Rear Road Disc Wheel (47mm)This carbon-rimmed ERC 1400 wheel by DT Swiss provides your racing bike with a pacy roll and top-end stiffness. Measuring a 47mm depth and a 19mm internal width, the strong rim maintains a streamlined form to keep you running with impressive speed. Designed with a tubeless-ready profile, the wheel also stays lightweight, improving the aerodynamics at your back-end. Fast-Rolling, Carbon-Fibre Road WheelPart of DT Swiss' AERO+ rim range, this ERC model is a race-ready option and its performance is enhanced by the addition of the DT240 hub and its Ratchet System 36 SL freehub. The DT240 comes laced with DT Aero Comp straightpull spokes which are pulled to optimum tension with ProLock nipples. The freehub uses its 36-tooth design to give fast engagement and high-end power transfer, plus it's Shimano 11-speed compatible. Optimised for use with CenterLock discs, the DT Swiss ERC 1400 SP DB 47mm Rear Wheel lets you ride with excellent control and all-weather stopping power, making it an excellent choice for the modern racer. Features: Rim Material: Carbon Rim Type: Clincher Internal Rim Width: 19mm External Rim Width: 27mm Rim height: 47mm Spokes: DT Aero Comp straightpull with DT ProLock hidden aluminium nipples, 2-cross lacing Hub Type: DT240 Hub Axle Type: 142x12mm thru-axle Freehub: Ratchet System 36 SL, Shimano 11-speed Tubeless-Ready: Yes Brake Standard: CenterLock disc brake Recommended Maximum Weight: 120kg Includes: Tubeless tape 21mm, Tubeless valve road 63mm, IS 6-bolt adapter Road, 5mm endcap kit, valve guard Weight: 832gBuy DT Swiss Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features: Designed to add serious all-conditions aerodynamic advantage in a durable Hybrid-certified package; the HEC 1400's are a superb upgrade for those looking to squeeze every ounce of performance from a high-end E-road bike, The carbon HEC rims were designed from scratch in conjunction with former F1 head of engineering JP Ballard and his team at the GST wind tunnel in Immenstaad, Germany, Using a bespoke fluid dynamic analysis system that for the first time allowed the designers to model and quantify the effect of crosswinds on a wheel's handling a rim profile was developed that gives an optimal balance between aerodynamics and handling, This is why the HEC rim is precisely 47 mm deep and 27 mm wide, any wider and you'd see an unacceptable increase in drag, any deeper and you'd compromise handling in rough conditions, we call this concept Aero+ and the result is a blindingly fast yet truly all conditions E-Road wheel, Reinforced Hybrid optimised SPLINE hub-shells, a strengthened 24-tooth ratchet and steel freehub bodies ensure long term durability even under prolonged hi-torque use, Thicker spokes greatly extend fatigue life and transfer the added torque from the hub more efficiently, 19 mm internal rim profile is optimised for 25-28 c tyres, For those looking to use the latest tyre tech the HEC 1400's come tubeless ready but can also be used with standard clinchers, Available in either standard 100/142 x 12 or 110/148 x 12 'Road BOOST' to fit the latest E-road designs, the Non-Boost versions can be adapted for Q/R using end caps (not included), Maximum recommended system weight: 130 KG, When bought as a pair they will include both Shimano and SRAM XDR steel freehubs, 6-bolt rotor adaptors, tubeless rim tape and valves, Weight: Front 711 grams Rear: 838 grams.
DT Swiss PRC 1400 Straight Pull Front Wheel 35mmBuilt to keep you rolling with stability and pace, the DT Swiss PRC 1400 SP 35mm Front Wheel features a tall carbon rim and a smooth-spinning DT240 hub for maximum efficiency on your fast-paced road rides. Measuring a 35mm rim depth, this PRC 1400 model makes the most of its carbon construction to give a lightweight yet sturdy experience on time-focused runs. Easy to handle due to the stiffness the carbon construction provides, this high-performance wheel keeps your road bike's front-end rolling true and steady, even when riding in blustery conditions. Tall-Rimmed, Carbon-Made, Front Road WheelStrengthened by DT AeroLite spokes, laced through a DT240 front hub for a streamlined and more rigid form, this precision-made wheel is easy to control when riding at top speeds. The hub spins with excellent smoothness, with its minimal-friction bearings giving you superb composure when flat road surfaces become a little rougher. The full carbon braking surface supports a confident stopping performance, making this fast-paced and responsive PRC model by DT Swiss a great option for the modern road rider. Features: Rim Material: Carbon Rim Dimensions: Internal Rim Width: 18mm External Rim Width: 25mm Rim Height: 35mm Spokes: DT AeroLite straightpull with DT ProLock Hidden aluminium nipples, radial lacing Hub Type: DT240 Hub Axle Type: 100x5mm Quick-Release Tubeless-Ready: Yes Brake Standard: Rim Brake Recommended Maximum Weight: 100kg Includes: RWS Steel, Tubeless tape 21mm, Tubeless valve road 53mm, Swisstop black princeBuy DT Swiss Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Push your boundaries with the rim brake ARC 1400, bleeding-edge Aero performance and DT's renowned quality in a privateer-friendly racing packageFor the first time the rim brake ARC's now incorporate DT's Ratchet EXP technology, with fewer moving parts, lower weight, improved reliability and lower bearing drag, the 240 EXP hubs offer the reliability and ease of servicing you've come to expect from DT in a super light racing hub that sets the standardThe bespoke rim profile's 17 mm internal width is optimised for 23-25c tyres and tubeless compatible, available in 80, 62 or 48 m deep options to suit any racing situation,Maximum recommended system weight: 100 KGs,Weight: 1738 grams a pair in 80mm, 1630 grams a pair in 62mm and 1573 grams a pair in 48 mm.
The most sure-footed, all-condition Aero wheels, the ERC range redefines stability!Back in 2016 DT broke new ground when they launched the ERC, the first truly aerodynamic wheel optimised for wider 25c tubeless tyres, but time doesn't stand still and even the best have to evolve, with a 22mm internal width and a rim profile optimised for 28-30c tyres the ERC has returned to the bleeding edgeBorn to produce the perfect high-speed wheelset for the real world of pot-holes and gusty lanes; DT's AERO+ design philosophy carefully balances handling in crosswinds with outright speed to produce the fastest possible durable all-conditions wheel,A product of DT's continued work with JP Ballard and his team at the GST wind tunnel in Immenstaad, Germany the new ERC rim profile offers the best possible mix of stability and speed, a hooked, 22mm wide design allows easy tubeless installation and opens up a huge range of tyre options,The ERC 1400's feature DT's 240 36-tooth Ratchet EXP hubs with DT's renowned sealed bearings, a superb mix of lightweight, stiffness, durability and ease of servicing,Maximum recommended system weight: 120 KG,Weight: 1498 grams a pair in 45mm and 1442 grams a pair in 35 mm.
The most sure-footed, all-condition Aero wheels, the ERC range redefines stability!Back in 2016 DT broke new ground when they launched the ERC, the first truly aerodynamic wheel optimised for wider 25c tubeless tyres, but time doesn't stand still and even the best have to evolve, with a 22mm internal width and a rim profile optimised for 28-30c tyres the ERC has returned to the bleeding edgeBorn to produce the perfect high-speed wheelset for the real world of pot-holes and gusty lanes; DT's AERO+ design philosophy carefully balances handling in crosswinds with outright speed to produce the fastest possible durable all-conditions wheel,A product of DT's continued work with JP Ballard and his team at the GST wind tunnel in Immenstaad, Germany the new ERC rim profile offers the best possible mix of stability and speed, a hooked, 22mm wide design allows easy tubeless installation and opens up a huge range of tyre options,The ERC 1400's feature DT's 240 36-tooth Ratchet EXP hubs with DT's renowned sealed bearings, a superb mix of lightweight, stiffness, durability and ease of servicing,Maximum recommended system weight: 120 KG,Weight: 1498 grams a pair in 45mm and 1442 grams a pair in 35 mm.
DT Swiss PRC 1100 Dicut MC 24mm Disc Front WheelTaking its name from Mon Chasseral (MC) that looms over the DT Swiss headquarters in the Jura mountains, this special edition road bike wheel combines the best of Swiss engineering performance with the finest of materials to propel you to the top of your own personal "Mon Chasseral". It features a high-quality carbon rim construction that's hand-made in Europe using special carbon layering technology for an excellent balance of stiffness, durability and an overall lower weight on your ride. Its superior strength to weight ratio also means that riders can enjoy easier climbing and powerful acceleration without any excess grams holding them back.Carbon Front Wheel with Centre Lock Disc Brake CompatibilityReady for long days on your road bike and exploring new surroundings, this front wheel is kitted out with Centre Lock disc brake compatibility. This means that you'll benefit from smooth and consistent braking operation when tackling steep descents and keeping your ride under full control when cornering. DT Swiss has also equipped this version with Aero Comp spokes on the left side of the wheel and AeroLite spokes on the right side, which offers further stability, strength and aerodynamics.Tubeless Ready TechnologyComing complete with a tubeless-ready rim design, this model allows riders to fit tubeless tyres and enjoy performance advantages such as the ability to run lower pressures, increased comfort and less chances of flats or punctures. This makes the DT Swiss PRC 1100 Dicut MC 24mm Disc Front Wheel a great choice of upgrade for the demands of modern road cycling.Features: Rim Material: Carbon Decal Type: Waterslide Use: Road Axle Size: 12x100mm, thru-axle Type: Clincher Tyre Interface: Tubeless crotched/Clincher Rim Diameter: 29"/700c Rim Height: 24mm Inner Rim Width: 18mm Outer Rim Width: 24mm Hub Type: 180 Brake Compatibility: Disc Brake Brake Rotor Compatibility: Centre Lock Spoke Type: Left: DT Aero Comp T-Head; Right: DT Aerolite T-Head Spoke Pattern: 2-Cross (1:1) Nipples: DT Pro Lock Hidden Aluminium Valve Type: Presta Included: Tubeless tape 21mm, Tubeless (TL) Valve Aluminium black 18-25mm, 5mm endcap Kit and wheel bag ASTM Classification: 1 Tubeless Ready: Yes Single or Pair: Single wheel Manufacturer's Part Number: WHDTPRC1103F Maximum Recommended System Weight: 110kg Weight: 578gTechnologies: SINC Ceramic Technology: SINC ceramic ball bearings have been developed by DT Swiss as a system. They are based on balls made from silicon nitride (Si3N4), an extremely tough and wear- and corrosion-resistant ceramic material. The bearing rings are made from a specially developed steel alloy, which is adapted to the properties of the specific ceramic material used and are precision ground. This combination reduces the rolling resistance to an absolute minimum and guarantees greater durability than conventional ball bearings. Tubeless Technology: Tubeless tyres have a number of advantages over the conventional combination of tube and tyre: without risking snakebites, the tyre can be run with lower pressures providing better grip. The lower pressure also results in a more comfortable ride. Eliminating the tube means there is no friction between tube and tyre and therefore less rolling resistance when the tyre rolls over the ground and obstacles. If tubeless sealant is used, the tyre can self-seal stings and small cuts. A big advantage for all those who like to ride for long and far away from the next bikeshop. Bearing Technology: Years of experience regarding optimal bearing preload and knowledge of production tolerances, allow DT Swiss to design durable, play-free hubs without bearing play adjustment. With this hub design additional weight can be saved again, since no threads need to be considered in the design, which allows a thinner wall thickness. Another advantage is easy maintenance and quick conversion to the various freewheel and axle systems. Buy DT Swiss Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Push your boundaries with the rim brake ARC 1400, bleeding-edge Aero performance and DT's renowned quality in a privateer-friendly racing packageFor the first time the rim brake ARC's now incorporate DT's Ratchet EXP technology, with fewer moving parts, lower weight, improved reliability and lower bearing drag, the 240 EXP hubs offer the reliability and ease of servicing you've come to expect from DT in a super light racing hub that sets the standardThe bespoke rim profile's 17 mm internal width is optimised for 23-25c tyres and tubeless compatible, available in 80, 62 or 48 m deep options to suit any racing situation,Maximum recommended system weight: 100 KG,Weight: 1738 grams a pair in 80mm, 1630 grams a pair in 62mm and 1573 grams a pair in 48 mm.
The ARC 1400 DICUT wheels represent the latest generation of the 1400 range from DT Swiss and its aerodynamic partners SWISS SIDE. AERO + profile rims achieve minimal aerodynamic drag at various crosswind angles, setting a new standard for performance. Thanks to its sail effect, you will gain momentum to benefit from crosswind conditions. The lower incidence of the wind allows the rider to maintain a stable aerodynamic position and full control of the bike. Aerodynamic DT Swiss spokes together with the lightweight 240 DICUT hub with Ratchet EXP system for direct hitch complete this top-level wheel. The ARC 1400 DICUT 50 is a set of low profile aerodynamic wheels to take full advantage of your pedaling power on those complicated and aggressive routes. Specification - Net weight 836 g - Recommended maximum weight 110 kg - Wheel diameter - 29 / 700C - Rim height - 50 mm - Inside rim width - 20 mm - Outer rim width - 27 mm - Axle system - 12mm Thru Axle - Installation width - 142 mm - Brake system - Disc Center Lock
Key Features:The gravel grand-masters! 1389 grams of all surfaces perfection, if you're looking to take your love of the rough stuff to the next level of speed and control, these are your wheels,The 22 mm internal width is perfect for high volume 35-45 c tyres, giving plenty of support for low pressures and maximising comfort and grip,The rims are manufactured using a method developed by DT to ensure continuous carbon fibres are aligned with the forces passing through the wheel, increasing strength and stiffness in use without adding weight,DT's SPLINE series 240 ratchet hubs have long been a byword for reliability and low weight, with optimum spoke placement to allow improved bracing angles, improving lateral stiffness for no additional weight, a fast-engaging 36-tooth ratchet completes a premium package,DT's straight pull Aerolite and Aerocomp spokes offer a highly optimised mix of low weight, stiffness and aerodynamic performance with DT's renowned reliability,If you're looking seriously at these wheels then you should be planning to use tubeless tyres and you'll be glad to hear the CRC 1400's come ready taped and with tubeless valves included,The front wheel comes ready for 12 x 100 mm thru axles with adaptors for 15 x 100 mm, the rear comes ready for 12 x 142 mm thru axles, both come with Q/R converters,Comes with a standard Shimano 11-speed Road freehub but can be converted to Campagnolo, Sram XD or the forthcoming XDR standard,The maximum recommended system weight: 120 KG,When bought as a pair they will include 6-bolt rotor adaptors, tubeless rim tape and valves,Weight: Front 622 grams Rear: 767 grams.
The new DT Swiss performance carbon wheels are the ultimate racing wheelsets. They rely on DT s huge experience in manufacturing every single component of a wheel, as well as employing state of the art technology in doing so. The bespoke carbon rims are manufactured using a method developed by DT to ensure continuous carbon fibres are aligned with the forces passing through the wheel, increasing strength and stiffness in use without adding weight.DT's Spline series 240 ratchet hubs have long been a byword for reliability and low weight and the spline spoke mounting has been revised to allow improved bracing angles, improving lateral stiffness for no additional weight, a fast-engaging 36-tooth ratchet completes a premium package. For those looking to use the latest tyre tech the PRC 1400's come tubeless ready but can also be used with standard clinchers.Bespoke carbon rimsTubeless ready 18mm (Internal), 35mm (Height) carbon rimSpokes: DT Aerolite straight pullHub type: 24011 Speed Shimano/SRAM compatibleRecommended system rider weight: 110kgWeight: 658g (Front) 828g (Rear)Includes: Tubeless ready tape, Tubeless valve and DT RWS Eco Skewers, Swissstop Black Prince brake pads, Valve guard, Spacer for 10 speed cassette
The Conquerors of Kona; the first generation ARC's were 3-times gold medal winners, victorious at the 2017, 2018 and 2019 Triathlon World Championships Developments in disc brake and tyre technology have meant that even the best needed to evolve to take advantage of the latest tyre technology and the frames able to accept them For the past 3 years, working with their aerodynamic R&D partners Swissside DT, have been continuously testing the latest generation of disc brake specific aerodynamic rims, hubs and spokes The result is a family of new, 20 mm wide (internal) rim profiles optimised for 25-28c tubeless tyres that have been proven by extensive lab and real world testing to enable lower rolling resistance and improved crosswind handling whilst achieving incremental reductions in drag, even over the original ARC designs As the leading hub engineering force on cycling, DT continue to push the boundaries of what can be expected from a racing hub, the new DICUT 180 with 36 tooth Ratchet EXP is the lightest, simplest, lowest drag road disc hub DT have ever made and still just as reliable and easy to service as the legendary 240 DT and Swissside's continuing leading-edge research into rotational drag and its effect on performance has lead to new, narrower Aerolite II and Aerocomp II spokes, unique to the ARC's these are what you can do when you design and make every part of the wheel and squeeze even more performance out of the system without the unproven reliability of less durable materials The front wheel comes ready for 12 x 100 mm thru axles, rear comes ready for 12 x 142 mm thru axles Maximum recommended system weight: 110 KG When bought as a pair they will include both Shimano Road and SRAM XDR freehubs, rim tape and lightweight tubeless valves Weights by rim depth: 80 mm: 1,820 grams a pair, 62 mm: 162 grams a pair, 50 mm: 1520 grams a pair
DT Swiss Arc 1400 Dicut Front Road Wheel (62mm)Leading you through flat courses with speed and power, this Arc 1400 front road wheel by DT Swiss gives a strong and dependable performance in the windiest conditions. The aero rim uses its carbon construction and 62mm depth to stay stiff and reactive at high speeds while minimising drag. The 17mm internal rim width keeps the wheel well-balanced over smooth road terrains, with the tubeless-ready profile also reducing weight for better aerodynamics. Deep Rim, Carbon Front Road Wheel The DT Aero Comp spokes are pulled through the rim to optimum tension by their ProLock nipples, enhancing the rigidity of the wheel and cutting through the air to increase the speed of each roll. The spokes are laced into the lightweight and supportive DT240 hub which ensures a smooth spin thanks to its friction-free bearings. Equipped with a long-lasting and reliable rim brake surface, this Arc road wheel gives an excellent stopping experience. Developed alongside SWISS SIDE engineers for an outstanding aero performance, the DT Swiss Arc 1400 Dicut 62mm Front Wheel is a quality choice for the pacy and versatile road rider. Features: Rim Material: Carbon Rim Type: Clincher Internal Rim Width: 17mm External Rim Width: 27mm Rim Height: 62mm Spokes: DT Aero Comp straightpull with DT ProLock hidden aluminium nipples, Radial lacing Hub Type: DT240 Hub Axle Type: 100x5mm QR Tubeless-Ready: Yes Brake Standard: Rim Brake Recommended Maximum Weight: 100kg Includes: RWS Steel, Tubeless tape 19mm, TL Vent aluminium black 49-65mm, Swissstop black prince, valve guard Buy DT Swiss Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
DT Swiss Arc 1400 Dicut Front Road Wheel (48mm)Keeping you steady and stable when running at top speeds, this Arc 1400 front wheel by DT Swiss boasts a carbon-fibre construction and a dashingly deep rim, ensuring a pacy and poised performance on every outing. Designed to be stiff, yet excellently agile, it copes superbly with high-speed road pressures as you weave away from the chasing pack. The 48mm rim height also delivers exceptional crosswind stability as you battle the elements as well as your competition. Deep-Rimmed, Carbon-Fibre Front Road Wheel A superb aero-wheel for the fast and focused racer, this Arc model rolls with superior smoothness thanks to the DT240 hub and its friction-reducing bearing setup. The hub also acts as the ideal anchor for the DT Aero comp spokes, holding them to the optimal tension to keep the wheel as rigid and responsive as possible. The spokes also enhance the streamlined performance as they slice through the air to minimise drag. With a top-notch carbon braking surface and a tubeless-ready profile for enhanced grip and protection when rolling on lower tyre pressures, the DT Swiss Arc 1400 Dicut 48mm Front Wheel is a speedy, silverware-seeking option. Features: Rim Material: Carbon Rim Type: Clincher Internal Rim Width: 17mm External Rim Width: 25mm Rim Height: 48mm Spokes: DT Aero Comp straightpull with DT ProLock Hidden aluminium nipples, radial lacing Hub Type: DT240 Hub Axle Type: 5x100mm QR Tubeless-Ready: Yes Brake Standard: Rim Brake Recommended Maximum Weight: 100kg Includes: RWS Steel, Tubeless tape 19mm, Tubeless valve road 63mm, Swissstop black prince, Valve guardBuy DT Swiss Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
DT Swiss Arc 1100 Dicut Rear Road Wheel (48mm)This fast-rolling and dependable road wheel is engineered to gives an aerodynamic performance as you tear across the asphalt. The 48mm rim depth on this superb road wheel provides every ride with reliable crosswind stability and minimises drag on speedy, timed races. The carbon construction maintains fantastic stiffness and responsiveness on the most challenging journeys, while the tubeless-ready profile reduces the weight of the wheel for a brilliantly streamlined experience.Features: Rim Material: Carbon Rim Dimensions: Internal Rim Width: 17mm; External Rim Width: 25mm Rim Height: 48mm Spokes: DT AeroLite straightpull with DT ProLock Hidden aluminium nipples, 2-cross lacing Hub Type: DT240 Hub Axle Type: 130x5mm QR Freehub: Ratchet System 36 SL, Shimano 11-speed Tubeless-Ready: Yes Brake Standard: Rim Brake Recommended Maximum Weight: 110kg Includes: Tubeless tape 19mm, IS 6-bolt adapter Road, Swissstop black prince, tubeless valve and refill kit, valve guard, wheel bag Weight: 829gBuy DT Swiss Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The 48mm rim depth on this superb road wheel provides every ride with dependable crosswind stability and minimises drag on speedy, timed races. The carbon construction maintains excellent stiffness and responsiveness on the most challenging journeys, while the tubeless-ready profile reduces the weight of the wheel for a brilliantly streamlined experience. Carbon Fibre, Deep Rim Front Road Wheel This fast-paced and quality-made road wheel rolls with poise and balance and achieves a spin with minimal friction thanks to the SINC ceramic bearings in the DT240 hub. The hub delivers top-notch control and efficiency and comes laced with DT AeroLite spokes for enhanced riding strength. The addition of a 36-tooth Ratchet System freehub helps to generate impressive power transfer when you need extra thrust. CenterLock disc brake optimisation finishes off this well-designed road wheel by DT Swiss. Included: Tubeless tape 19mm IS 6-bolt adapter Road Swissstop black prince Tubeless valve and refill kit Valve guard Wheel bag