All the protection, lightness and versatility a rider needs to tackle long distances with the utmost confidence. The Linea 03 half-shell MTB helmet offers the ideal versatility, lightness and safety to tackle any path with total control. Dual-density EPS foam offers enhanced protection while reducing the weight amountPolycarbonate outer shellRotor size micro adjustmentsAdjustable peakRemovable and washable inner liningAnti-bacterial and anti-odour inner lining17 air intakes for maximum airflowMaterials: Inner shell: 96% polystyrene. Outer shell: polycarbonate 1%, PA66 1%, foam 1%, polyester 1%.Greater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subject and exposed to impact. An advanced structure that, weighing just 340 grams in total (in size M), exceeds all international standards, namely CPSC 1203, CE EN1078, and AS/NZ 2063. The heightened comfort of the soft, anti-bacterial and anti-odour thermoformed lining allows the rider to focus only on the path, riding without constraints even over very long distances. 18 air vents spread across the entire surface of the shell allow optimal ventilation and breathability during every phase of activity and in all weather conditions. The rear design of the shell allows for hair pulled back into a ponytail or braid to pass through. Visibility is perfect on every route and in every condition due to the flexible, tilt-adjustable peak that is practical, solid and can be operated with one hand and with gloves on.
Dainese Enduro Knee GuardsBurly and robust protection to give you the confidence you need for the toughest of routes, the Dainese Enduro Knee Guards still provide plenty of freedom by saving weight and featuring plenty of breathability.Significantly increasing coverage across the most sensitive areas of your legs, the Enduro Knee Guards from Dianese are made from tough ABS plastic that see abrasions bounce off with ease. However, far from riding around in a suit of armour, the feel of these knee guards is extraordinarily freeing, with plenty of elasticity in the mix to allow your legs full flexibility, while the back panel is made of highly breathability material to keep you cool and wick sweat away from the body.Features:Materials: 85% Polyamide, 15% Elastane50% extra coverage compared to the Trail Skins 2Pre-curved construction/extra mobilityExtra-wide elastic band with silicone grippersCalf construction, inner elastic fastening systemExternal side pads in certified Pro-ArmorAirnet-Elastic reinforced constructionBack panel in Jersey Hole, highly breathable run-resistant meshRigid plates feature ABS technology and extra coverage for knee-cap & shinBuy Dainese Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Dainese Trail Skins Pro Knee GuardWith their development and testing on the World Cup circuit, the Dainese Trail Skins Pro Knee Guard pushes protection, comfort and flexibility to new heights. For the most demanding of mountain bike trails, they're n essential.The Trail Skins Pro Knee Guards provide the ideal balance of reliable knee protection, superb flexibility and free-flowing ventilation. The excellent level of protection come by the way of the carbon-elastomer compound and ergonomic shape of the Pro-Shape 2.0 protectors. These absorb and dissipate impact forces while the smooth side pads reduce friction and allow smooth sliding should you fall. Flexibility is guaranteed through the ergonomic design, mapped to follow the motion of the knee when you're pedalling. A second-skin-like fit is offered via the highly breathable sock while perforated zones allow for ventilation as the heat rises. Thigh and calf straps create a firm hold and keep your pads in place as you move and change your riding position. Features:Pro-Shape 2.0 padsSide protection bolstersJersey hole Highly Breathable, Run-Resistant meshCalf elastic bandExtra-wide elastic bands with silicone grippersSlip-on designThigh and calf strapsCE EN 1621.1Sold as a pairBuy Dainese Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Dainese Trail Skins Pro Knee GuardWith their development and testing on the World Cup circuit, the Dainese Trail Skins Pro Knee Guard pushes protection, comfort and flexibility to new heights. For the most demanding of mountain bike trails, they're n essential.The Trail Skins Pro Knee Guards provide the ideal balance of reliable knee protection, superb flexibility and free-flowing ventilation. The excellent level of protection come by the way of the carbon-elastomer compound and ergonomic shape of the Pro-Shape 2.0 protectors. These absorb and dissipate impact forces while the smooth side pads reduce friction and allow smooth sliding should you fall. Flexibility is guaranteed through the ergonomic design, mapped to follow the motion of the knee when you're pedalling. A second-skin-like fit is offered via the highly breathable sock while perforated zones allow for ventilation as the heat rises. Thigh and calf straps create a firm hold and keep your pads in place as you move and change your riding position. Features:Pro-Shape 2.0 padsSide protection bolstersJersey hole Highly Breathable, Run-Resistant meshCalf elastic bandExtra-wide elastic bands with silicone grippersSlip-on designThigh and calf strapsCE EN 1621.1Sold as a pairBuy Dainese Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Dainese Trail Skins Pro Knee GuardWith their development and testing on the World Cup circuit, the Dainese Trail Skins Pro Knee Guard pushes protection, comfort and flexibility to new heights. For the most demanding of mountain bike trails, they're n essential.The Trail Skins Pro Knee Guards provide the ideal balance of reliable knee protection, superb flexibility and free-flowing ventilation. The excellent level of protection come by the way of the carbon-elastomer compound and ergonomic shape of the Pro-Shape 2.0 protectors. These absorb and dissipate impact forces while the smooth side pads reduce friction and allow smooth sliding should you fall. Flexibility is guaranteed through the ergonomic design, mapped to follow the motion of the knee when you're pedalling. A second-skin-like fit is offered via the highly breathable sock while perforated zones allow for ventilation as the heat rises. Thigh and calf straps create a firm hold and keep your pads in place as you move and change your riding position. Features:Pro-Shape 2.0 padsSide protection bolstersJersey hole Highly Breathable, Run-Resistant meshCalf elastic bandExtra-wide elastic bands with silicone grippersSlip-on designThigh and calf strapsCE EN 1621.1Sold as a pairBuy Dainese Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Trail Skins Pro Knee Guards provide the ideal balance of reliable knee protection, superb flexibility and free-flowing ventilation. The excellent level of protection come by the way of the carbon-elastomer compound and ergonomic shape of the Pro-Shape 2.0 protectors. These absorb and dissipate impact forces while the smooth side pads reduce friction and allow smooth sliding should you fall. Flexibility is guaranteed through the ergonomic design, mapped to follow the motion of the knee when you're pedalling. A second-skin-like fit is offered via the highly breathable sock while perforated zones allow for ventilation as the heat rises. Thigh and calf straps create a firm hold and keep your pads in place as you move and change your riding position.
Dainese Trail Skins Pro Knee GuardWith their development and testing on the World Cup circuit, the Dainese Trail Skins Pro Knee Guard pushes protection, comfort and flexibility to new heights. For the most demanding of mountain bike trails, they're n essential.The Trail Skins Pro Knee Guards provide the ideal balance of reliable knee protection, superb flexibility and free-flowing ventilation. The excellent level of protection come by the way of the carbon-elastomer compound and ergonomic shape of the Pro-Shape 2.0 protectors. These absorb and dissipate impact forces while the smooth side pads reduce friction and allow smooth sliding should you fall. Flexibility is guaranteed through the ergonomic design, mapped to follow the motion of the knee when you're pedalling. A second-skin-like fit is offered via the highly breathable sock while perforated zones allow for ventilation as the heat rises. Thigh and calf straps create a firm hold and keep your pads in place as you move and change your riding position. Features:Pro-Shape 2.0 padsSide protection bolstersJersey hole Highly Breathable, Run-Resistant meshCalf elastic bandExtra-wide elastic bands with silicone grippersSlip-on designThigh and calf strapsCE EN 1621.1Sold as a pairBuy Dainese Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
All the protection, lightness and versatility a rider needs to tackle long distances with the utmost confidence. The Linea 03 MIPS half-shell MTB helmet offers the ideal versatility, lightness and safety to tackle any path with total control. Lightweight, safe and versatile half-shell MTB helmet with integrated MIPS system and Fidlock fasteningDual-density EPS foam offers enhanced protection while reducing the weight amountPolycarbonate outer shellMaterials: Inner shell: 96% polystyrene. Outer shell: polycarbonate 1%, PA66 1%, foam 1%, polyester 1%Rotor size micro adjustmentsAdjustable peakRemovable and washable inner liningAnti-bacterial and anti-odour inner liningFidlock magnetic buckle systemFeaturing MIPS Brain Protection System - a helmet integrated, low-friction layer designed to reduce rotational motion transferred to the brain from impacts17 air intakes for maximum airflowHomologation: CPSC 1203, CE EN1078, AS/NZ 2063Greater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subject and exposed to impact. An advanced structure that, weighing just 340 grams in total (in size M), exceeds all international standards, namely CPSC 1203, CE EN1078, and AS/NZ 2063. The integrated MIPS system reduces the possibility of dangerous rotational impact forces being transmitted to the head. The heightened comfort of the soft, anti-bacterial and anti-odour thermoformed lining allows the rider to focus only on the path, riding without constraints even over very long distances. 18 air vents spread across the entire surface of the shell allow optimal ventilation and breathability during every phase of activity and in all weather conditions. The rear design of the shell allows for hair pulled back into a ponytail or braid to pass through. Visibility is perfect on every route and in every condition due to the flexible, tilt-adjustable peak that is practical, solid and can be operated with one hand and with gloves on. Fast and secure fastening is ensured by the Fidlock magnetic system, which can also be operated while wearing gloves.
All the protection, lightness and versatility a rider needs to tackle long distances with the utmost confidence. The Linea 03 MIPS half-shell MTB helmet offers the ideal versatility, lightness and safety to tackle any path with total control. Lightweight, safe and versatile half-shell MTB helmet with integrated MIPS system and Fidlock fasteningDual-density EPS foam offers enhanced protection while reducing the weight amountPolycarbonate outer shellMaterials: Inner shell: 96% polystyrene. Outer shell: polycarbonate 1%, PA66 1%, foam 1%, polyester 1%Rotor size micro adjustmentsAdjustable peakRemovable and washable inner liningAnti-bacterial and anti-odour inner liningFidlock magnetic buckle systemFeaturing MIPS Brain Protection System - a helmet integrated, low-friction layer designed to reduce rotational motion transferred to the brain from impacts17 air intakes for maximum airflowHomologation: CPSC 1203, CE EN1078, AS/NZ 2063Greater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subject and exposed to impact. An advanced structure that, weighing just 340 grams in total (in size M), exceeds all international standards, namely CPSC 1203, CE EN1078, and AS/NZ 2063. The integrated MIPS system reduces the possibility of dangerous rotational impact forces being transmitted to the head. The heightened comfort of the soft, anti-bacterial and anti-odour thermoformed lining allows the rider to focus only on the path, riding without constraints even over very long distances. 18 air vents spread across the entire surface of the shell allow optimal ventilation and breathability during every phase of activity and in all weather conditions. The rear design of the shell allows for hair pulled back into a ponytail or braid to pass through. Visibility is perfect on every route and in every condition due to the flexible, tilt-adjustable peak that is practical, solid and can be operated with one hand and with gloves on. Fast and secure fastening is ensured by the Fidlock magnetic system, which can also be operated while wearing gloves.
All the protection, lightness and versatility a rider needs to tackle long distances with the utmost confidence. The Linea 03 MIPS half-shell MTB helmet offers the ideal versatility, lightness and safety to tackle any path with total control. Lightweight, safe and versatile half-shell MTB helmet with integrated MIPS system and Fidlock fasteningDual-density EPS foam offers enhanced protection while reducing the weight amountPolycarbonate outer shellMaterials: Inner shell: 96% polystyrene. Outer shell: polycarbonate 1%, PA66 1%, foam 1%, polyester 1%Rotor size micro adjustmentsAdjustable peakRemovable and washable inner liningAnti-bacterial and anti-odour inner liningFidlock magnetic buckle systemFeaturing MIPS Brain Protection System - a helmet integrated, low-friction layer designed to reduce rotational motion transferred to the brain from impacts17 air intakes for maximum airflowHomologation: CPSC 1203, CE EN1078, AS/NZ 2063Greater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subject and exposed to impact. An advanced structure that, weighing just 340 grams in total (in size M), exceeds all international standards, namely CPSC 1203, CE EN1078, and AS/NZ 2063. The integrated MIPS system reduces the possibility of dangerous rotational impact forces being transmitted to the head. The heightened comfort of the soft, anti-bacterial and anti-odour thermoformed lining allows the rider to focus only on the path, riding without constraints even over very long distances. 18 air vents spread across the entire surface of the shell allow optimal ventilation and breathability during every phase of activity and in all weather conditions. The rear design of the shell allows for hair pulled back into a ponytail or braid to pass through. Visibility is perfect on every route and in every condition due to the flexible, tilt-adjustable peak that is practical, solid and can be operated with one hand and with gloves on. Fast and secure fastening is ensured by the Fidlock magnetic system, which can also be operated while wearing gloves.
Dainese Rival Pro Knee GuardsBringing motorcycle-inspired protection to your mountain bike rides, the Dainese Rival Pro Knee Guards offer the ultimate knee protection along with outstanding flexibility for easy freedom of movement. When your focus is on fast lines, fast times and the fast weight shifts needed to meet the demands of mountain bike racing and trail slaying, the Rival Pro Knee Guards come into their own. Whether it's an extreme descent or an ascent to the start of your next enduro stage, you get the benefits of optimal freedom of movement and reassuring levels of protection when it all goes wrong.Packed with ProtectionInspired by the geometry of auxetic materials present in nature, dissipating forces in all directions when impacted, the Pro-Shape 2.0 protectors offer flexible protection that complements your movements rather than hinders them. In fact, Dainese claims the Pro-Shape 2.0 elbow zone will absorb up to 83% of the force of an impact, protecting your knee from injury in a crash.But that isn't all, the Rival Pros also feature extra protection by the way of a central steel plate. Inspired by MotoGP suits, this increases protection against the sharp piercing impacts of rocks and roots and adds excellent slide properties useful in the case of a skid. Pads to the outer of the calf also add extra protection in the event of a crash.Lightweight and BreathableThe sleeve of these pads is made from a lightweight and breathable perforated fabric for outstanding riding comfort. With 45% of the structure of an open design, you can look forward to excellent ventilation to keep you cool on even the warmest of days and rowdiest of trail-riding sessions.When you're taking on the roughest and most challenging of trails, the snug-fitting sleeve that extends to the thigh and an elastic calf gripper, with silicone, ensures the Rival Pros remain securely where they should be. No slipping, more focus on the ride.Features:Pro-Shape 2.0 ProtectorsSteel knee cap hybrid constructionCE EN 1621.1 Level 2Jersey hole highly breathable, run-resistant meshExtra-wide elastic bands with silicone grippersCalf elastic band with silicone grippersBuy Dainese Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Dainese Rival Pro Knee GuardsBringing motorcycle-inspired protection to your mountain bike rides, the Dainese Rival Pro Knee Guards offer the ultimate knee protection along with outstanding flexibility for easy freedom of movement. When your focus is on fast lines, fast times and the fast weight shifts needed to meet the demands of mountain bike racing and trail slaying, the Rival Pro Knee Guards come into their own. Whether it's an extreme descent or an ascent to the start of your next enduro stage, you get the benefits of optimal freedom of movement and reassuring levels of protection when it all goes wrong.Packed with ProtectionInspired by the geometry of auxetic materials present in nature, dissipating forces in all directions when impacted, the Pro-Shape 2.0 protectors offer flexible protection that complements your movements rather than hinders them. In fact, Dainese claims the Pro-Shape 2.0 elbow zone will absorb up to 83% of the force of an impact, protecting your knee from injury in a crash.But that isn't all, the Rival Pros also feature extra protection by the way of a central steel plate. Inspired by MotoGP suits, this increases protection against the sharp piercing impacts of rocks and roots and adds excellent slide properties useful in the case of a skid. Pads to the outer of the calf also add extra protection in the event of a crash.Lightweight and BreathableThe sleeve of these pads is made from a lightweight and breathable perforated fabric for outstanding riding comfort. With 45% of the structure of an open design, you can look forward to excellent ventilation to keep you cool on even the warmest of days and rowdiest of trail-riding sessions.When you're taking on the roughest and most challenging of trails, the snug-fitting sleeve that extends to the thigh and an elastic calf gripper, with silicone, ensures the Rival Pros remain securely where they should be. No slipping, more focus on the ride.Features:Pro-Shape 2.0 ProtectorsSteel knee cap hybrid constructionCE EN 1621.1 Level 2Jersey hole highly breathable, run-resistant meshExtra-wide elastic bands with silicone grippersCalf elastic band with silicone grippersBuy Dainese Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Dainese Rival Pro Knee GuardsBringing motorcycle-inspired protection to your mountain bike rides, the Dainese Rival Pro Knee Guards offer the ultimate knee protection along with outstanding flexibility for easy freedom of movement. When your focus is on fast lines, fast times and the fast weight shifts needed to meet the demands of mountain bike racing and trail slaying, the Rival Pro Knee Guards come into their own. Whether it's an extreme descent or an ascent to the start of your next enduro stage, you get the benefits of optimal freedom of movement and reassuring levels of protection when it all goes wrong.Packed with ProtectionInspired by the geometry of auxetic materials present in nature, dissipating forces in all directions when impacted, the Pro-Shape 2.0 protectors offer flexible protection that complements your movements rather than hinders them. In fact, Dainese claims the Pro-Shape 2.0 elbow zone will absorb up to 83% of the force of an impact, protecting your knee from injury in a crash.But that isn't all, the Rival Pros also feature extra protection by the way of a central steel plate. Inspired by MotoGP suits, this increases protection against the sharp piercing impacts of rocks and roots and adds excellent slide properties useful in the case of a skid. Pads to the outer of the calf also add extra protection in the event of a crash.Lightweight and BreathableThe sleeve of these pads is made from a lightweight and breathable perforated fabric for outstanding riding comfort. With 45% of the structure of an open design, you can look forward to excellent ventilation to keep you cool on even the warmest of days and rowdiest of trail-riding sessions.When you're taking on the roughest and most challenging of trails, the snug-fitting sleeve that extends to the thigh and an elastic calf gripper, with silicone, ensures the Rival Pros remain securely where they should be. No slipping, more focus on the ride.Features:Pro-Shape 2.0 ProtectorsSteel knee cap hybrid constructionCE EN 1621.1 Level 2Jersey hole highly breathable, run-resistant meshExtra-wide elastic bands with silicone grippersCalf elastic band with silicone grippersBuy Dainese Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Dainese Rival Pro Knee GuardsBringing motorcycle-inspired protection to your mountain bike rides, the Dainese Rival Pro Knee Guards offer the ultimate knee protection along with outstanding flexibility for easy freedom of movement. When your focus is on fast lines, fast times and the fast weight shifts needed to meet the demands of mountain bike racing and trail slaying, the Rival Pro Knee Guards come into their own. Whether it's an extreme descent or an ascent to the start of your next enduro stage, you get the benefits of optimal freedom of movement and reassuring levels of protection when it all goes wrong.Packed with ProtectionInspired by the geometry of auxetic materials present in nature, dissipating forces in all directions when impacted, the Pro-Shape 2.0 protectors offer flexible protection that complements your movements rather than hinders them. In fact, Dainese claims the Pro-Shape 2.0 elbow zone will absorb up to 83% of the force of an impact, protecting your knee from injury in a crash.But that isn't all, the Rival Pros also feature extra protection by the way of a central steel plate. Inspired by MotoGP suits, this increases protection against the sharp piercing impacts of rocks and roots and adds excellent slide properties useful in the case of a skid. Pads to the outer of the calf also add extra protection in the event of a crash.Lightweight and BreathableThe sleeve of these pads is made from a lightweight and breathable perforated fabric for outstanding riding comfort. With 45% of the structure of an open design, you can look forward to excellent ventilation to keep you cool on even the warmest of days and rowdiest of trail-riding sessions.When you're taking on the roughest and most challenging of trails, the snug-fitting sleeve that extends to the thigh and an elastic calf gripper, with silicone, ensures the Rival Pros remain securely where they should be. No slipping, more focus on the ride.Features:Pro-Shape 2.0 ProtectorsSteel knee cap hybrid constructionCE EN 1621.1 Level 2Jersey hole highly breathable, run-resistant meshExtra-wide elastic bands with silicone grippersCalf elastic band with silicone grippersBuy Dainese Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
When your focus is on fast lines, fast times and the fast weight shifts needed to meet the demands of mountain bike racing and trail slaying, the Rival Pro Knee Guards come into their own. Whether it's an extreme descent or an ascent to the start of your next enduro stage, you get the benefits of optimal freedom of movement and reassuring levels of protection when it all goes wrong. Packed with Protection Inspired by the geometry of auxetic materials present in nature, dissipating forces in all directions when impacted, the Pro-Shape 2.0 protectors offer flexible protection that complements your movements rather than hinders them. In fact, Dainese claims the Pro-Shape 2.0 elbow zone will absorb up to 83% of the force of an impact, protecting your knee from injury in a crash. But that isn't all, the Rival Pros also feature extra protection by the way of a central steel plate. Inspired by MotoGP suits, this increases protection against the sharp piercing impacts of rocks and roots and adds excellent slide properties useful in the case of a skid. Pads to the outer of the calf also add extra protection in the event of a crash. Lightweight and Breathable The sleeve of these pads is made from a lightweight and breathable perforated fabric for outstanding riding comfort. With 45% of the structure of an open design, you can look forward to excellent ventilation to keep you cool on even the warmest of days and rowdiest of trail-riding sessions. When you're taking on the roughest and most challenging of trails, the snug-fitting sleeve that extends to the thigh and an elastic calf gripper, with silicone, ensures the Rival Pros remain securely where they should be. No slipping, more focus on the ride.
Dainese Trail Skins Pro Armour TeeA versatile protector for mountain biking, the Dainese Trail Skins Pro Armour Tee features soft but protective Pro-Shape 2.0 protectors that cover the shoulders, back and chest.The most versatile torso protection in the Dainese line, the Trail Skins Pro Armour Tee provides impact protection in those areas of your upper body most vulnerable during a crash. Inspired by the geometry of auxetic materials present in nature, the Pro-Shape 2.0 protectors offer flexible protection that complements your movements rather than hinders them. The protectors are also removable, letting you tailor when and where you want protection, while also making it easy for cleaning. The tee itself is made from a lightweight and breathable fabric for utmost riding comfort. With 55% of the structure of an open design, you can look forward to excellent ventilation to keep you cool on even the warmest of days. The extended length also makes it simple to tick into your MTB pants/shorts. Two rear pockets complete the package, letting you carry your essentials close to your body without the bulk of a backpack or waist pack. Features:Materials: 90% Polyester, 10% ElastaneAuxagon Technology back protectorAuxetic Chest ProtectionPro-Shape 2.0 shoulder padsCE EN 1621.2 Level 1. protectionJersey hole highly breathable, run-resistant meshBack storage pocketsCrew neckBuy Dainese Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Dainese Trail Skins Pro Armour TeeA versatile protector for mountain biking, the Dainese Trail Skins Pro Armour Tee features soft but protective Pro-Shape 2.0 protectors that cover the shoulders, back and chest.The most versatile torso protection in the Dainese line, the Trail Skins Pro Armour Tee provides impact protection in those areas of your upper body most vulnerable during a crash. Inspired by the geometry of auxetic materials present in nature, the Pro-Shape 2.0 protectors offer flexible protection that complements your movements rather than hinders them. The protectors are also removable, letting you tailor when and where you want protection, while also making it easy for cleaning. The tee itself is made from a lightweight and breathable fabric for utmost riding comfort. With 55% of the structure of an open design, you can look forward to excellent ventilation to keep you cool on even the warmest of days. The extended length also makes it simple to tick into your MTB pants/shorts. Two rear pockets complete the package, letting you carry your essentials close to your body without the bulk of a backpack or waist pack. Features:Materials: 90% Polyester, 10% ElastaneAuxagon Technology back protectorAuxetic Chest ProtectionPro-Shape 2.0 shoulder padsCE EN 1621.2 Level 1. protectionJersey hole highly breathable, run-resistant meshBack storage pocketsCrew neckBuy Dainese Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Dainese Trail Skins Pro Armour TeeA versatile protector for mountain biking, the Dainese Trail Skins Pro Armour Tee features soft but protective Pro-Shape 2.0 protectors that cover the shoulders, back and chest.The most versatile torso protection in the Dainese line, the Trail Skins Pro Armour Tee provides impact protection in those areas of your upper body most vulnerable during a crash. Inspired by the geometry of auxetic materials present in nature, the Pro-Shape 2.0 protectors offer flexible protection that complements your movements rather than hinders them. The protectors are also removable, letting you tailor when and where you want protection, while also making it easy for cleaning. The tee itself is made from a lightweight and breathable fabric for utmost riding comfort. With 55% of the structure of an open design, you can look forward to excellent ventilation to keep you cool on even the warmest of days. The extended length also makes it simple to tick into your MTB pants/shorts. Two rear pockets complete the package, letting you carry your essentials close to your body without the bulk of a backpack or waist pack. Features:Materials: 90% Polyester, 10% ElastaneAuxagon Technology back protectorAuxetic Chest ProtectionPro-Shape 2.0 shoulder padsCE EN 1621.2 Level 1. protectionJersey hole highly breathable, run-resistant meshBack storage pocketsCrew neckBuy Dainese Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Dainese Trail Skins Pro Armour TeeA versatile protector for mountain biking, the Dainese Trail Skins Pro Armour Tee features soft but protective Pro-Shape 2.0 protectors that cover the shoulders, back and chest.The most versatile torso protection in the Dainese line, the Trail Skins Pro Armour Tee provides impact protection in those areas of your upper body most vulnerable during a crash. Inspired by the geometry of auxetic materials present in nature, the Pro-Shape 2.0 protectors offer flexible protection that complements your movements rather than hinders them. The protectors are also removable, letting you tailor when and where you want protection, while also making it easy for cleaning. The tee itself is made from a lightweight and breathable fabric for utmost riding comfort. With 55% of the structure of an open design, you can look forward to excellent ventilation to keep you cool on even the warmest of days. The extended length also makes it simple to tick into your MTB pants/shorts. Two rear pockets complete the package, letting you carry your essentials close to your body without the bulk of a backpack or waist pack. Features:Materials: 90% Polyester, 10% ElastaneAuxagon Technology back protectorAuxetic Chest ProtectionPro-Shape 2.0 shoulder padsCE EN 1621.2 Level 1. protectionJersey hole highly breathable, run-resistant meshBack storage pocketsCrew neckBuy Dainese Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
The most versatile torso protection in the Dainese line, the Trail Skins Pro Armour Tee provides impact protection in those areas of your upper body most vulnerable during a crash. Inspired by the geometry of auxetic materials present in nature, the Pro-Shape 2.0 protectors offer flexible protection that complements your movements rather than hinders them. The protectors are also removable, letting you tailor when and where you want protection, while also making it easy for cleaning. The tee itself is made from a lightweight and breathable fabric for utmost riding comfort. With 55% of the structure of an open design, you can look forward to excellent ventilation to keep you cool on even the warmest of days. The extended length also makes it simple to tick into your MTB pants/shorts. Two rear pockets complete the package, letting you carry your essentials close to your body without the bulk of a backpack or waist pack.