New guard BMX sprocket from BSD. The guard sprocket features 5 spoke design which allows you to rotate the sprocket for maximum wear on the guard.. Supplied with both 19mm and 22mm top hat washers ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: TBC
Dan Paley likes to get rude (aka grind) on all available surfaces without causing enough rudeness (aka noise and/or damage) to upset the neighbours. His new signature Rude Tube pegs have a durable plastic sleeve with a heat treated and butted chromo inner peg for maximum strength. Please note: The BSD Rude Tube Peg is sold individually. ###section### Product Specs LENGTH: 4.2" (106.6mm) DIAMETER: 37mm MATERIAL: Plastic AXLE SIZE: 10mm / 14mm PACK SIZE: 1 (Single) WEIGHT: 170g (6oz)
The OG Dan Paley signature peg with a durable plastic outer sleeve. Heat treated, butted chromo inner peg. New XL 4.5" x 1.46" diameter. Please note: The BSD Rude Tube LT XL Peg is sold individually. ###section### Product Specs LENGTH: 4.5" (114mm) DIAMETER: 37mm MATERIAL: Plastic AXLE SIZE: 10mm PACK SIZE: 1 (Single) WEIGHT: 170g (6oz)
Replacement Plastic outer for BSD Jersey Barrier Hub Guards. Version 1 : Fits Odyssey, WTP, Shadow, Sputnic, Macneil cassette hubs etc. Version 2: Fits Primo Mix cassette Hub. Version 3: Fits Profile and Madera cassette hubs. Ratchet Version: Fits G-sport Ratchet hub. Marmost version: Fits G-sport Marmoset front hub. Vandero 2 Version: Fits Odyssey Vandero 2 front hubs. BSD Front Version: Fits BSD front hubs. BSD Rear Version: Fits BSD rear hubs.
Mid BB kit from BSD. The Kit includes 2 Sealed bearings, CNCd spacers, tube spacer, sprocket bolt and spacers.
Replacement female cromo axle for the Back Street Pro hub.
BSD Pro Street Female Driver Replacement Driver to fit the BSD Pro Street Female 14mm Cassette hub. Includes all Springs and Pawls as well as polymer bushing.
Replacement bearing to fit the Drive side of the West coaster hub.
Replacement Guard for the BSD Barrier sprocket. Comes with replacement bolts ###section### Product Specs TYPE: Bolt-On MATERIAL: Nylon WEIGHT: 100g
Tough CNC'd 7075 aluminium sprocket from BSD. The Superlite sprocket is 8mm thick around the edges for strength and tapers to 6mm in the middle to save weight. Comes with two top hat washers to fit all cranks. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 70g / 2.5oz
Replacement crank arm for Substance cranks. LH arm or RH arm with spindle available ###section### Product Specs Rise: 22mm Bar Clamping Diameter: Chromoly Bar Clamping Diameter: TBC
Sam Jones signature Jonesin' Sprocket V2 model sticks to what made his first so popular this time around adding his updated graphics and some new colourways. Its got a tough, classic look made from solid 7075-T6 aluminium and features a modern bolt-on high density nylon plastic guard. The low-friction nylon material keeps your chain protected while not interfering with your grinds. ###section### Product Specs TYPE: Bolt Drive MATERIAL: 7075-T6 Aluminium WEIGHT: 190g (42lbs)
Reed Stark's signature Safari Bars are now available in a 4-piece construction, aptly named the S4F4RI Bars. They're built from heat-treated multiple butted 4130 chromoly ensuring maximum strength and durability. The upsweep, backsweep and height have been kept the same as the 2-Piece version of the Safari Bars for those familiar with them and wanting to go for a 4-Piece bar instead. This is the Oversized version of the S4f4ri built to fit stems with a 25.4mm clamping area. ###section### Product Specs Rise: 9.6" Width: 29.5" Up Sweep: 3° Backsweep: 13° Bar Clamping Diameter: 25.4mm Bar Type: 4pc Weight: 816g (1.8lbs) ###section### ###shogun-image-section###
Reed Stark's signature Safari Bars are now available in a 4-piece construction, aptly named the S4F4RI Bars. They're built from heat-treated multiple butted 4130 chromoly ensuring maximum strength and durability. The upsweep, backsweep and height have been kept the same as the 2-Piece version of the Safari Bars for those familiar with them and wanting to go for a 4-Piece bar instead. ###section### Product Specs Rise: 9.6" Width: 29.5" Up Sweep: 3° Backsweep: 13° Bar Clamping Diameter: 22.2mm Bar Type: 4pc Weight: 816g (1.8lbs) ###section### ###shogun-image-section###
Alex D's newest signature bars continue the ALVX range, with a classic BMX shape and only 28" wide these things are built to go the distance. Built from multi-butted chromoly for strength with a heavily knurled clamping area to really secure the ALVX in the stem. ###section### Product Specs Rise: 9.5" Width: 28" Up Sweep: 2° Backsweep: 11° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 771g (27.2oz) ###section### ###shogun-image-section###
Crank installation and removal tool for use with the BSD Substance 24mm XL cranks.
Crank installation and removal tool for use with the BSD Substance cranks.