Genuine Wheels Manufacturing spare or a great tool on it's ownTo remove sealed bearings you will need the correct size extractor, 8mm & 10mm wrenches (for small sized extractors) or 13mm and 1-ö wrenches (for large sized extractors), hammer and punchThe correct size extractor will fit snugly into the inner diameter (I.D.) of the sealed bearing you wish to extractPlace extractor into I.D. of sealed bearing until it seats flush with the shoulder of the extractorTighten nut with wrench while securing extractor with other wrench. Tighten nut until the extractor is firmly in place within the I. D. of the sealed bearingOnce the extractor is secured, align a punch with back side of the extractorGently tap on the punch until bearing is removed along with the extractorThe bearing is now removed. Install new sealed bearings with a Wheels Mfg PRESS-1 (rear hub & bb-Æs) or PRESS-2 (front hub)
Use this conversion kit to fit standard Hollowtech II (or compatible) cranks to fit into a BB30 Bottom Bracket. The shims press directly into the BB30 (6086) bearings and you can then slide your crank axle through as though it were a normal HT2 Bottom Bracket. Removal is easy too, you may need to lightly tap out the shims from the bearing.
Description will appear here shortly...
Run Shimano HollowTech-II cranks in your BBRight frame. Shims are based on industry standard BBRight bottom bracket shells they are easy to install and machined for exact fit. Shims press fit directly into BBRight bearings You will need the BBRight bearings already installed into the BBRight shell to start this conversion Removal is the opposite of installation You may need to gently tap them out from the opposite side
Run any SRAM cranks in any bottom bracket designed for 30mm axles.
Run any SRAM cranks in any bottom bracket designed for 30 mm axles
BB30 service kit with 2 clips and 2 6806 angular contact Enduro bearings
Run SRAM / Truvativ cranks in your BB30 frame Easy to install and machined for exact fit Shims press fit directly into BB30 bearings (6806) You will need the 6806 bearings already installed into the BB30 shell to start this conversion Removal is the opposite of installation You may need to gently tap them out from the opposite side
Run any Shimano cranks in any bottom bracket designed for 30 mm axles
Featuring serviceable, double lip sealed Enduro bearings, This bottom bracket is made with a USA machined aluminium shell for superior function and durability. Fits race frames with a BB86 Bottom bracket shell and cranks with a 24mm spindle.
Easy-to-use tool removes and installs replacement bushingsIncludes retaining tool top cap and all three eyelet slammersFits all eyelet sizes - 10 mm 12 mm and 1/2 inch
Standard threaded road bottom bracket - compatible with 24/22 mm axlesServiceable double lip sealed Enduro bearingsUSA machined aluminium shell for superior function and durabilityEnglish threadGrey anodized
Standard threaded MTB bottom bracket - compatible with 24/22 mm axlesServiceable double lip sealed Enduro bearingsUSA machined aluminium shell for superior function and durabilityEnglish threadBlack anodized
PressFit 30 to outboard bottom bracket - compatible with all standard 24 mm axlesEliminates the need for adaptorsServiceable double lip sealed Enduro bearingsUSA machined aluminium shell for superior function and durabilityThreaded design for easy installation and removalFits 68 - 73 mm width shellsBlack anodized
Threaded BB for BB86 BB92 and PF90 frames and 22/24mm diameter spindle (GXP) cranks. Machined cups thread together for stability increased bearing life and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. Bearings: Enduro ABEC-3 Color: Black Bottom Bracket/Frame Interface: BB86 BB92 PF90 Bottom Bracket Shell Width: 86mm - 92mm Bottom Bracket Shell I.D.: 41mm Over Bearing Width: 93mm in 86.5mm wide shell* Crank Spindle Diameter: 22/24mm Tool Pattern: 48.5mm x 16 notch Weight: 121g Packaged for retail display Over Bearing Width Dimensions include supplied silicone dust shields. Compatible with the following Bottom Bracket Standards (41mm BB shell inner diameter 86mm - 92mm width): BB86 BB92 PF90 (Trek) Compatible with 22/24mm spindle diameter GXP cranksets. Notes: Wheels Mfg BB86 thread-together BB for use with 24/22mm spindle cranks will not work with the following Quarq / SRAM powermeters: Elsa Riken S975 S2275 CinQo Saturn Saturn2 and Eagle.
BSA 30 bottom bracketServiceable double lip sealed Angular Contact Enduro bearingsUSA machined aluminium shell for superior function and durabilityEnglish threadBlack anodized
Threaded BB for BB86 BB92 and PF90 frames and 24mm diameter spindle cranks. Machined cups thread together for stability increased bearing life and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. Specs Bearings: Enduro ABEC-3 Color: Black Bottom Bracket/Frame Interface: BB86 BB92 PF90 Bottom Bracket Shell Width: 86mm - 92mm Bottom Bracket Shell I.D.: 41mm Over Bearing Width: 93mm in 86.5mm wide shell* Crank Spindle Diameter: 24.00mm Tool Pattern: 48.5mm x 16 notch Weight: 106g Packaged for retail display Over Bearing Width Dimensions include supplied silicone dust shields. Compatible with the following Bottom Bracket Standards (41mm BB shell inner diameter 86mm - 92mm width): BB86 BB92 PF90 (Trek) Compatible with 24.00mm spindle diameter cranksets.
The two machined aluminium cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance,This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement,Specifically designed for installing 24mm spindle diameter cranks (Shimano, Etc.) in Cannondale BB30A (42mm ID, 73mm wide asymmetrical BB shell) frames without the need for any adaptors,Note: FSA MegaExo spindles can be between 24mm and 24.07mm in diameter. If your FSA spindle is 24.07mm, this BB will not work.
Standard threaded road bottom bracket with angular contact bearings - compatible with 24/22 mm axlesServiceable double lip sealed Enduro bearingsUSA machined aluminium shell for superior function and durabilityEnglish threadGrey anodized
Thread together bottom bracket for 386EVO and bottom bracket frames and 29mm spindle diameter cranks (SRAM DUB). Machined Aluminium cups thread together for stability, increased bearing life, and simple installation and maintenanceNo more creaking. Smooth operation. Fast bearing replacement,Bearings: Enduro ABEC-3,Bottom Bracket/Frame Interface: bottom bracket386EVO, bottom bracketRight, PF30/83,Bottom Bracket Shell Width (mm): 79mm - 92mm,Bottom Bracket Shell I.D.: 46mm,Crank Spindle Diameter: 29mm,Over Bearing Width: 86.5mm in 86.5mm wide shell,Weight: 126g.