The Kraftform Kompakt 60 KK Toolset features a workshop quality T-handle screwdriver set that features an ergonomically designed handle for comfortable performance throughout use. It also comes with a 17-piece bit set that is ideal for working on road bikes, mountain bikes (MTB) and electric bikes (E-Bike) and is a superb addition to any workshop or toolbox. Pouch with bits in a length of 89 mm. Includes torque screwdriver 7441 with Rapidaptor quick-release chuck and multi-component Kraftform handle for low-fatigue working. Suitable for manual and power tool operations. 17-piece; compact handle/interchangeable blade system for torque-controlled tightening. Includes torque holder 7441, settings from 1.2 to 3.0 Nm. Adjustable in 0.10 Nm steps. Simple setting of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Includes 16 bits with a length of 89 mm and a practical pouch for tidy storage. Pouch with 89-mm long bits. Includes 816 R Kraftform holder with Rapidaptor quick-release chuck and multi-component Kraftform handle for low-fatigue working. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Suitable for manual and power tool operations; 17-piece. Series 7400 Kraftform adjustable torque screwdrivers (0.1-3.0 Nm) with Rapidaptor quick-release chuck Wera torque screwdriver. Variable torque setting option with the highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value: audible click signal. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with 1/4" hexagon head drive. 851/4 Z bits High-quality bits for Phillips screws. Tough viscous for universal use. 1/4" hexagon, suitable for holders. 855/4 Z bits High-quality bits for Pozidriv* screws. Tough viscous for universal use. 1/4" hexagon, suitable for holders. * Pozidriv = registered trademark of European Industrial Service Ltd. 867/4 Z Torx BO bits with borehole High-quality bits for recessed Torx screws. Torx BO screws have a protruding pin in their drive profile. This prevents any unauthorised loosening since the "normal" hex tools cannot move these screws. Only special BO tools have a borehole to take up the pin. Tough viscous for universal use. 1/4" hexagon, suitable for holders. 800/4 Z bits Tough viscous Wera bits for slotted screws for universal use. 1/4" hexagon, suitable for holders. 840/4 Z bits Tough viscous Wera bits for hexagon socket screws for universal use. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head is more or less eliminated. 1/4" hexagon, suitable for holders.
These Hex-Plus L-Keys are ideal for working on Hex bolts and feature an L-shaped design, offering easier access for hard-to-reach fittings. They also feature a colour-coded high-grip plastic coating that makes identifying the correct key size easier and tooling more comfortable. High quality L-keys out of stainless steel for hexagonal socket screws by Wera. Stainless steel prevents the transfer of extraneous rust. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head is more or less eliminated. Come with hex ballpoint on the long arm: the ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling around the corner screwdriving.
These workshop-quality screwdrivers are colour coded for easy identification and they are coated in high-grip plastic for added comfort and control. This set is a comfortable and efficient T-Handle screwdriver set with Wera's Holding Function (HF) to securely hold the screw on the tool. They also feature ergonomically shaped 2-component T-Handles with finger recesses for high power working and fatigue-free performance. The T-handle screwdriver is the ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. With holding function (HF) to securely hold the hexagon socket screw on the tool. Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head. 454 T-handle Hexagon Screwdriver Hex-Plus The T-handle screwdriver design is the ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head.
This range of tools features Wera Tools Kraftform grips that offer multiple compounds to ensure an excellent balance of grip, torque and comfort. Tool specialist Wera presents Bicycle Big Pack 1, a 14-piece bicycle workshop toolset that includes T-Shaped Hex and Torx Keys, Kraftform Screwdrivers and chiseldrivers. Supplied with a wall-mountable rack for clearly arranged storage in the workshop, this set is suitable for Road, mountain bike (MTB) and electric bikes (E-Bikes). The T-Handle Hex and Torx Keys have a special handle shape with ergonomic recessed finger grips, allowing for fatigue-free working and easy operations on the bike whether you are tightening or loosening bolts. Their extra-short arm allows for the transmission of extremely high torques through the leverage of the long arm. Due to the special surface treatment, the blades receive a high level of corrosion protection, and the fitting accuracy of the screw is also optimised. The set includes Wera's iconic ergonomic Kraftform handles on the screwdrivers and chiseldrivers for fatigue-free working with no chance of blisters or calluses. The screwdrivers also feature laser-tip technology. A precisely focused laser creates a sharp-edged surface structure on the tip of the screwdriver. This Wera laser treatment results in an extreme edge allowing the screwdriver to 'bite' itself into the screw head, preventing any slips out of the recess. The Chiseldriver is the solution for jobs that require more than just screwdriving. For fastening, chiselling and loosening seized screws or hose clamps. Includes an integrated impact cap that extends service life and reduces the risk of splintering. This set also features Wera's Take it Easy colour coded tool size finder system, meaning it's quick to identify which Key you need for the job.
The T-handle screwdriver is the ideal handle shape that allows the transmission of particularly high tightening and loosening torque. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the softly rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. With holding function to securely hold the Torx screw on the tool. Special surface treatment of the blades for high corrosion protection and optimum fitting accuracy in the screw. Including a metal rack for storage. The rack can be placed on the workbench or hung on the tool wall. This toolset also features a metal rack for T-handle screwdrivers. The rack can be placed on the workbench or hung on the tool wall. For up to 7 Wera Torx T-handle screwdrivers.
Engineered from ultra-durable glass-fibre reinforced plastic, these reliable tyre levers offer superb leverage and will not damage your tyres or rims. Tool specialist Wera presents Bicycle Torque Set 13, a 2-piece tyre lever set for mobile or workshop use. Both tyre levers are made of glass fibre reinforced plastic, meaning you can safely and easily remove your tyres from your rim without any damage. The two levers click together for easy storage, and each features its own unique additional function. The 9502 lever has 'A' bit mounting for light screwdriving requirements. And the 9503 lever acts as a valve ejector for Presta valves.
Wera soft-faced hammers feature a double-sided conical design for a secure, inseparable connection between the hammer handle and head. The hammerhead is made out of nylon, the handle out of high-quality ash wood. Diverse applications thanks to the interchangeable soft-faced hammerheads. Suitable for sheet metal and renovation work as well as for tent, hall and fair booth construction jobs.
Ideal for road, mountain bike (MTB) and electric bikes (E-Bike), this toolset is durable and hardwearing while also featuring a compact hook and loop fastener strip for easy storage. 7-piece screwdriver set with Kraftform Plus handle for comfortable ergonomic screwdriving, which avoids blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Includes some tools with Lasertip blades: The tip clings to the screw head and prevents it from slipping out. Take it easy tool finder with colour coding and size stamping - for easy and fast location of the required tool. The anti-roll protection avoids bits from annoying rolling away in the workplace. 350 PH Screwdriver for Phillips screws High-quality Kraftform Plus screwdriver. Multi-component Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. "Take it easy" tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal non-roll feature prevents any rolling away at the workplace. 355 PZ Screwdriver for Pozidriv screws High-quality Kraftform Plus screwdriver by Wera. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer for fast and low fatigue working. "Take it easy" tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal non-roll feature prevents any rolling away at the workplace. 367 Screwdriver for Torx screws High-quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. "Take it easy" Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. 335 Screwdriver for slotted screws High-quality Kraftform Plus screwdriver with electrician's blade. Multi-component Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. "Take it easy" tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal non-roll feature prevents any rolling away at the workplace.
Strong, corrosion-resistant and colour-coded for your convenience, these tools are a dependable addition to any workshop or home toolbox. Tool specialist Wera presents Bicycle Set 4, a compact 9-piece L-Keys set for bicycle maintenance and repairs. Supplied in a lightweight and robust folding pouch, this set is suitable for road bikes, mountain bikes (MTB) and electric bikes (E-Bikes). This set really stands out from your average set of Allen keys because it features Wera's Take it Easy colour coded tool size finder system, meaning it's quick to identify with L-Key you need for the job. The plastic sleeving on the L-Keys makes them comfortable to use, even in low temperatures. The Ball Head end of each L-Key makes it easy to use these Keys in hard-to-reach areas of your bike. These L-Keys also feature Wera's Hex-Plus technology, which means the tool has a greater contact area with the screw. This prevents the screw from damage (being rounded out) over time, and additionally, the greater contact surface area allows you to apply up to 20% more torque. Hex-Plus tools fit every standard hexagon screw socket you might find on a bicycle. The L-Keys fit securely into the storage clip which is made of solid rubber, giving easy removal and no wear to the coloured plastic sleeves of the keys or size markings.
This toolset features a sleek and slim-design 5-piece Joker spanner set for a wide range of bike repairs and tuning. It also comes supplied with a durable folding case that features Wera's 2go hook and loop system for convenient transport and storage. Tool specialist Wera presents Bicycle Set 10, a 5-piece Joker Spanner set in an extra slim design for bicycle maintenance and repairs. Supplied with a robust folding case for easy transport or storage. The case also features the Wera 2go hook and loop system on the back meaning the set can be easily attached to the wall, shelf or workshop trolley. This set is suitable for Road, MTB and E-Bikes. This combination spanner and wrenches are ideal for narrow spaces you can encounter when working on a bike. The combination of the 7.5 degree pivoted mouth and the double hexagon geometry doubles the placement points for the tool when you are working. This smart mouth technology significantly expands the range of uses in the confined spaces of a bike, even at pivoting angles of under 30 degrees. The set includes 1 pedal specific spanner This set also features Wera's Take it Easy colour coded tool size finder system, meaning its quick to identify which size Joker you need for the job.
Wera Tools Bicycle Set 12 ToolsetThe Bicycle Set 12 Toolset from Wera Tools is a Joker Spanner set with a slim low-profile design, 12 sized spanners and a flexible and durable folding carry case. This high-quality spanner set is of workshop quality and is the ideal toolset for any bike shop, work shed or home garage bike maintenance.Tool specialist Wera presents Bicycle Set 12, a 12-piece Joker Spanner set in an extra slim design for bicycle maintenance and repairs. Supplied with a robust folding case for easy transport or storage. The case also features the Wera 2go hook and loop system on the back meaning the set can be easily attached to the wall, and shelf or workshop trolley. This set is suitable for Road, MTB and E-Bikes. This combination spanner and wrenches are ideal for narrow spaces you can encounter when working on a bike. The combination of the 7.5 degree pivoted mouth and the double hexagon geometry, doubles the placement points for the tool when you are working. This smart mouth technology significantly expands the range of uses in the confined spaces of a bike, even at pivoting angles of under 30 degrees. The set includes 1 pedal specific spanner This set also features Wera's Take it Easy colour coded tool size finder system, meaning its quick to identify which size Joker you need for the job. Features: 4 x 6003 Joker spanner (6mm, 7mm, 8mm, 9mm, 10mm, 13mm, 14mm, 16mm, 17mm) 1 x 6003 Joker pedal spanner (15x174mm) 1 x Highly robust and durable textile case with Wera 2go hook system Size: 240mm x 105mm x 65mm Set Weight: 946gBuy Wera Tools Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wera Tools Bicycle Set 2 Screwdriver SetIdeal for tooling jobs and tuning your road, mountain bike (MTB) or electric bike (E-Bike), the Bicycle Set 2 Screwdriver Set features a compact and durable 13-piece screwdriver set that includes 89mm bits to make bike maintenance easier and more precise.Tool specialist Wera presents Bicycle Set 2, a compact 13-piece screwdriver toolset with 89mm bits for bicycle maintenance and repairs. Supplied in a lightweight and robust folding pouch, this set is suitable for Road, MTB and E-Bikes. The set includes Wera's iconic ergonomic Kraftform bit hand holder for fatigue-free working. Plus, the Rapidaptor quick-release chuck, for fast bit change without the need for additional tools. The tough-absorbing bits prevent any premature breakage of the drive tip.Additionally, these tools feature Hex-Plus technology, which means the tool has a greater contact area with the screw. This prevents the screw from damage (being rounded out) over time, and additionally the greater contact surface area allows you to apply up to 20% more torque. Hex-Plus tools fit every standard hexagon screw socket you might find on a bicycle. Features: 1 x Kraftform bit hand holder with Rapidaptor quick release chuck 2 x Philips Head (PH) 89mm long Bits (PH 1, PH 2) 6 x Hex-Plus 89mm long Bits (2mm, 2.5mm, 3mm, 4mm, 5mm, & 6mm) 4 x TORX 89mm long Bits (TX10, TX20, TX25, TX30) 1 x Lightweight & robust folding fabric bag Size: 150mm x 110mm x 65mm Set Weight: 406gBuy Wera Tools Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wera Tools 950/9 Hex-Plus HF 1 L-Key ToolsetIdeal for working on hard-to-reach fittings and offering better leverage when tooling road, mountain bikes (MTB) and electric bikes (E-Bike) fittings, the 950/9 Hex-Plus HF 1 L-Key Toolset from Wera Tools feature colour coded, easy-grip plastic sleeves wrapped around workshop quality stainless L-keys. High quality L-keys out of stainless steel for hexagonal socket screws by Wera. Stainless steel prevents the transfer of extraneous rust. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. Come with hex ballpoint on the long arm: the ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling around the corner screwdriving. Features: Take it easy Tool Finder: colour coding according to size. In an almost wear-free L-key clip fastener. Hexagonal ballpoint on the long arm Colour coded, easy-to-grip plastic sleeve, even at low temperatures Solution to the extraneous rust problem: fasten stainless screws with stainless tools Hex-Plus allows socket head screws to live longer Stainless L-keys prevent extraneous rust on stainless screws Take it easy tool finder with colour coding according to sizes Wear-resistant clip material for enhanced durabilityBuy Wera Tools Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wera Tools Bicycle Set 3 Screwdriver SetThe ideal screwdriver set for most workshop bike jobs and is a superb addition to any toolbox, the Bicycle Set 3 Screwdriver Set from Wera Tools features a high-quality Kraftform bit hand holder and Zyklop Ratchet with 39-bits for many different fittings to suit a wide range of tooling requirements.Tool specialist Wera presents Bicycle Set 3, a compact but comprehensive 39-piece screwdriver and socket toolset for bicycle maintenance and repairs. Supplied in a lightweight and robust folding pouch, this set is suitable for Road, MTB and E-Bikes. The set includes Wera's iconic ergonomic Kraftform bit hand holder for fatigue-free working. Plus, the Rapidaptor quick-release chuck, for fast bit change without the need for additional tools. The tough-absorbing bits prevent any premature breakage of the drive tip. The Zyklop Mini 1 bit ratchet slim design and fine-tooth mechanism of the ratchet, with its small return angle of only 6 degrees, makes it ideal reaching confined spaces on your bike. The Zyklop sockets are suitable for manual and machine-operated tools (non-impact). They feature a ball stop groove and knurling at the rear end for manageability during manual use. These tools feature Wera's Take it Easy Tool Finder colour coding, for easy and fast location of the tool you need for the job. Additionally, these tools feature Hex-Plus technology, which means the tool has a greater contact area with the screw. This prevents the screw from damage (being rounded out) over time, and additionally the greater contact surface area allows you to apply up to 20% more torque. Hex-Plus tools fit every standard hexagon screw socket you might find on a bicycle.Features: 1 x Kraftform bit hand holder with Rapidaptor quick release chuck 1 x Zyklop Ratchet 1 x K Rapidaptor Universal bit holder 1 x Nut spinner socket adaptor 7 x HMA Zyklop 1/4" Socket (5.5mm, 6mm, 7mm, 8mm, 10mm, 13mm, 15mm) 3 x TZ Philips Head Bits (PH 1, PH 2, PH 3) 7 x TZ TORX Bits (TX10, TX15, TX20, TX25, TX27, TX30, TX40) 3 x TZ Flat Head Screwdriver Bits (4mm, 4.5mm, 5.5mm) 7 x Hex-Plus 89mm long Bits (2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm) 5 x Hexagon Ball Head Bit (2.5mm, 3mm, 4mm, 5mm, 6mm) 2 x Tyre Lever 1 x Robust and lightweight fabric pouch Size: 210mm x 110mm x 65mm Set Weight: 678gBuy Wera Tools Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wera Tools 467/7 TORX HF T-Handle Screwdriver SetThe 467/7 TORX HF T-Handle Screwdriver Set drom Wera Tools is a compact and efficient workshop quality T-handle screwdriver set that features an ergonomically designed handle for comfortable performance throughout use. It also comes with a 17-piece bit set that is ideal for working on road, mountain bike (MTB) and electric bikes (E-Bike) and is a superb addition to any workshop or toolbox.Pouch with bits in a length of 89 mm. Includes torque screwdriver 7441 with Rapidaptor quick-release chuck and multi-component Kraftform handle for low-fatigue working. Suitable for manual and power tool operations. 17-piece; compact handle/interchangeable blade system for torque-controlled tightening. Includes torque holder 7441, settings from 1.2 to 3.0 Nm. Adjustable in 0.10 Nm steps. Simple setting of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Includes 16 bits with a length of 89 mm and a practical pouch for tidy storage. Pouch with 89-mm long bits. Includes 816 R Kraftform holder with Rapidaptor quick-release chuck and multi-component Kraftform handle for low-fatigue working. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Suitable for manual and power tool operations; 17-piece. Series 7400 Kraftform adjustable torque screwdrivers (0.1-3.0 Nm) with Rapidaptor quick-release chuckWera torque screwdriver. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value: audible click signal. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with ¼" hexagon head drive.851/4 Z bitsHigh quality bits for Phillips screws. Tough viscous for universal use. ¼" hexagon, suitable for holders. 855/4 Z bitsHigh quality bits for Pozidriv* screws. Tough viscous for universal use. ¼" hexagon, suitable for holders. * Pozidriv = registered trademark of European Industrial Service Ltd. 867/4 Z TORX BO bits with bore holeHigh quality bits for recessed TORX screws. TORX BO screws have a protruding pin in their drive profile. This prevents any unauthorised loosening since the "normal" hex tools cannot move these screws. Only special BO tools have a bore hole to take up the pin. Tough viscous for universal use. 1/4" hexagon, suitable for holders. 800/4 Z bitsTough viscous Wera bits for slotted screws for universal use. ¼" hexagon, suitable for holders. 840/4 Z bitsTough viscous Wera bits for hexagon socket screws for universal use. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. ¼" hexagon, suitable for holders. Features: Series 7400 Kraftform adjustable torque screwdrivers (0.1-3.0 Nm) with Rapidaptor quick-release chuck 851/4 Z bits 855/4 Z bits 867/4 Z TORX BO bits with bore hole 800/4 Z bits 840/4 Z bitsBuy Wera Tools Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wera Tools Bicycle Set 5 ToolsetThe ideal toolset for most trail and roadside repairs and tuning, the Bicycle Set 5 Toolset from Wera Tools features a comfortable and compact screwdriver/ratchet tool and a collection of bits.Tool specialist Wera presents Bicycle Set 5, a Kraftform Kompakt Stubby screwdriver with bits that are stored inside the handle. This stubby screwdriver is ideal for working in tight installation spaces you find around a bike. This set is suitable for Road, MTB and E-Bikes. Wera's iconic ergonomic Kraftform handles offers firm grip and fatigue-free working with no chance of blisters or calluses. The screwdriver features a ratchet function with low return angle and an easy to operate reversable ring, allowing you to switch between right, left or fixed turning. 7 stainless steel bits are included, 6 of which are in a magazine in the handle, and one in the bit holder. The strong permanent magnet in the bit mounting ensures secure holding of the bit. Wera stainless steel bits are manufactured out of stainless steel so unsightly rust can be avoided. During manufacturing the bits are vacuum ice-hardened for excellent durability. This set also features Wera's Take it Easy colour coded tool size finder system, meaning its quick to identify which bit you need for the job. Features: 1 x Kraftform Kompakt Stubby Screwdriver with Ratchet Function 1 x 3851/1 TS Philips Head Bit (PH 1) 4 x 3840/1 TS Hex Bits (2.5mm, 3mm, 4mm, 5mm) 2 x 3867/1 TS TORX Bits (TX10, TX25) Size: 115mm x 60mm x 40mm Set Weight: 175gBuy Wera Tools Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wera Tools Bicycle Set 7 ToolsetThe Bicycle Set 7 Toolset offers a collection of workshop quality tool for common bike tooling tasks and mechanical tune-ups. It features a 3/8" ratchet with a 27-piece socket set that is ideal for working on road, mountain bike (MTB) and electric bikes (E-Bikes) and is a superb addition to any workshop or toolbox.Tool specialist Wera presents Bicycle Set 7, a 27-piece 3/8" Ratchet and socket set for bicycle maintenance and repairs. Supplied with a metal rack for clearly arranged storage in the workshop, this set is suitable for Road, MTB and E-Bikes. It is supplied in highly robust and durable textile case which can be placed open and upright on your workshop shelf, or it can be folded and closed for easy transport. The Zyklop Speed ratchet features a freely pivoting head, which can be locked into any position using a slide switch, it also has set lock positions at 0, 15 and 90 degrees (both left and right). This fine tuning and low return angle of only 5 degrees, means it is possible to work in very confined and difficult to access areas of the bike with ease. The ratchet also features a thumbwheel that can be used to switch between clockwise and anticlockwise rotation quickly and easily, at any position, saving you valuable workshop time. This ratch also doubles up as a screwdriver. This set also features Wera's Take it Easy colour coded tool size finder system, meaning its quick to identify which size tool you need for the job. The long bit sockets with extra slim, cylindrical profile zones are ideal for low-located couplings, for example bottom bracket ball bearings or stem-fork clamping. Features: 1 x Zyklop Speed 3/8" Ratchet 9 x Zyklop 3/8" 8790 HMB 29mm Sockets (6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm) 1 x Zyklop 3/8" 8790 HMB Deep 64mm socket (15mm) 2 x Zyklop 3/8" 8740 B Hex Plus 100mm Bit Socket (8mm, 10mm) 1 x Zyklop 3/8" 8794 B Wobble Extension with 15 degree swivel angle 1 x Zyklop 3/8" 8794 SB short extension with free turning sleeve 1 x Zyklop 8784 B1 3/8" bit adaptor with quick release chuck 2 x 781 B 3/8" connection parts (3/8" square head socket drive with 1/4" external square) 4 x Hex-Plus Z 50mm Bits (3mm, 4mm, 5mm, 6mm) 6 x Torx 867/4 Z 50mm bits (TX10, TX15, TX20, TX25, TX27, TX30) 1 x Highly robust and durable textile case Size: 330mm x 150mm x 70mm Set Weight: 1852gBuy Wera Tools Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wera Tools Bicycle Set 9 ToolsetThe Bicycle Set 9 Toolset is a versatile mini toolset that is ideal for working on the most common screwing needs when repairing and tuning your bike. Ideal for use on road, mountain bike (MTB) and electric bikes (E-Bike), this set features a Zyklop Mini 1-bit ratchet, 9 bits and a durable plastic storage case.Tool specialist Wera presents Bicycle Set 9, a mini toolset which offers solutions for the most common screwdriving needs when working with bicycles. Supplied in a plastic case, this set is compact for easy storage and is suitable for Road, MTB and E-Bikes.The set includes the Zyklop Mini 1 bit ratchet and 9 bits, which are made from drop-forged stainless steel. The slim design and fine-tooth mechanism of the ratchet, with its small return angle of only 6 degrees, makes it ideal reaching confined spaces on your bike. Additionally, these tools feature Hex-Plus technology, which means the tool has a greater contact area with the screw. This prevents the screw from damage (being rounded out) over time, and additionally the greater contact surface area allows you to apply up to 20% more torque. Hex-Plus tools fit every standard hexagon screw socket you might find on a bicycle. Features: 1 x Zyklop 8001 A Mini Ratchet 1 x Philips Head (PH) Bit 2 x 25mm 6 x Hex-Plus Bits (2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm) 2 x TORX Bits (TX25, TX10) 1 x Plastic storage case Size: 123mm x 74mm x 27mm Set Weight: 156gBuy Wera Tools Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wera Tools Bicycle Set 10 ToolsetIdeal for workshop-quality tooling on your road, mountain bike (MTB) or electric bike (E-Bike), the Bicycle Set 10 Toolset from Wera Tools features a sleek and slim-design 5-piece Joker spanner set for a wide range of bike repairs and tuning. It also comes supplied with a durable folding case that features Wera's 2go hook and loop system for convenient transport and storage.Tool specialist Wera presents Bicycle Set 10, a 5-piece Joker Spanner set in an extra slim design for bicycle maintenance and repairs. Supplied with a robust folding case for easy transport or storage. The case also features the Wera 2go hook and loop system on the back meaning the set can be easily attached to the wall, and shelf or workshop trolley. This set is suitable for Road, MTB and E-Bikes. This combination spanner and wrenches are ideal for narrow spaces you can encounter when working on a bike. The combination of the 7.5 degree pivoted mouth and the double hexagon geometry, doubles the placement points for the tool when you are working. This smart mouth technology significantly expands the range of uses in the confined spaces of a bike, even at pivoting angles of under 30 degrees. The set includes 1 pedal specific spanner This set also features Wera's Take it Easy colour coded tool size finder system, meaning its quick to identify which size Joker you need for the job. Features: 4 x 6003 Joker spanner (8mm, 9mm, 10mm, 13mm) 1 x 6003 Joker pedal spanner (15x174mm) 1 x Highly robust and durable textile case with Wera 2go hook system Size: 220mm x 90mm x 45mm Set Weight: 392gBuy Wera Tools Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wera Tools Tool-Check Plus ToolsetThe Tool-Check Plus Toolset offers a superb collection of ratchet and screwdriver tools that are ideal for most screwing and wrenching tasks when tuning and repairing your bike. This toolset is also suited to working on road, mountain bike (MTB) and electric bikes (E-Bike).Combination tool consisting of a ratchet, bits, sockets and holder in a minimum of space. Ideal as a universal companion for a whole host of screwdriving applications. High quality bit holder with Kraftform Plus handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Mini ratchet for rapid working when fastening jobs with a power tool or conventional hand tools are not feasible due to insufficient space. Rapid changeover from left to right direction and vice versa by using the switchover lever. Fast work possible by turning the thumbwheel (with the thumb) on the ratchet head. Simplest operation even with just one hand. Ergonomic ratchet head/lever: Kraftform geometry with perfectly shaped contact areas for the fingers. The direct bit take-up in the ratchet head makes for a mini tool design and is ideal for low working heights. The small return angle of 6q allows for precise work. Robust drop-forged, full steel design. Torque of over 65 Nm. The Rapidaptor bit holder with free-turning sleeve: can be used as an extension; for rapid bit change without any special tools, even the very smallest bits with just a single hand. Tough viscous bits for universal use. Sockets for both manual as well as power tool operations for almost all applications.Take it easy Tool Finder with colour coding according to size - for simple and rapid accessing of the required tool. Featuring a good grip to allow easy pick-up even with oily hands. Ball stop groove, for hex head bolts and nuts; chrome vanadium steel, matt chrome plated.813 Bitholding screwdriverHigh quality bit holder. Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Suitable for bits with 1/4" hexagon head drive 889/4/1 K Rapidaptor Universal Bit Holder889/4/1 K Rapidaptor Universal Bit HolderRapidaptor universal holder for bits with 1/4" hexagon head drive. The Rapidaptor allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward. This enables rapid bit change with just one hand. The strong permanent magnet holds the bits absolutely securely. 1/4" hexagonal, suitable for power screwdrivers with take-up 8790 HMA Zyklop 1/4" socketManual and power tool socket insert by Wera allows applications both in manual as well as power tools. "Take it easy" Tool Finder with colour coding according to size - for simple and rapid accessing of the required tool. Featuring a good grip to allow easy pick-up even with oily hands. Ball stop groove, for hex head bolts and nuts; chrome vanadium steel, matt chrome plated.851/1 TZ bitsHigh quality bits for Phillips screws. The Torsion design means that torque peaks can be absorbed. This prevents premature wear and enhances the service life. Tough viscous for universal use. 1/4" hexagon, suitable for holders. 855/1 TH bitsHigh quality bits with Torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Extra-hard; 1/4" hexagon, suitable for holders. 867/1 TZ TORX bitsHigh quality bits with a Torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Tough viscous for universal use. 1/4" hexagon, suitable for holders. 867/1 Z TORX BO bits with bore holeHigh quality bits for recessed TORX screws. The bore hole in the bit and the pin in the TORX BO screw prevent any unauthorised loosening - secure fastening. Tough viscous for universal use. 1/4" hexagon, suitable for holders. 840/1 Z bitsTough viscous Wera bits for hexagon socket screws and universal use. Hex-Plus offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. 1/4" hexagon, suitable for holders. 800/1 TZ bitsBits for slotted screws with Torsion zone to combat premature wear. Tough viscous for universal use; 1/4" hexagon, suitable for holders Features: A Bit Ratchet 1/4" 813 Bitholding screwdriver 889/4/1 K Rapidaptor Universal Bit Holder 870/1 Adaptor 8790 HMA Zyklop 1/4" socket 851/1 TZ bits 855/1 TH bits 867/1 TZ TORX bits 867/1 Z TORX BO bits with bore hole 840/1 Z bits 800/1 TZ bitsBuy Wera Tools Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.