The Truvativ Powerspline bottom bracket will only fit Truvativ 12 spline chainsets. This bottom bracket is intended for road or trekking use.
The Atmos 7k stem is a lightweight, performance stem designed for trail and cross-country use and is the lightest stem in the Atmos range. Featuring a rise or drop of 6° depending on your preference, it is also available in 6 different lengths depending on your sizing needs. All fasteners are adjustable via a t25 tool for easy, quick adjustments. The Atmos 7k also features an integrated Go-Pro mount. 40,50,60,70,80,90mm lengths±6° angleIntegrated GoPro mountT25 fasteners for 1 tool across the cockpit
Truvativ Descendant MTB Riser BarsWith the Truvativ Descendant MTB Riser Handlebar on your ride, you can be certain that you're equipped to perform to your best, as its race-proven width and geometry has been created using the very best Enduro riders input. The Descendant bars also feature a strong and dependable AL 7050 aluminium construction, which not only ensures they're durable enough to handle any trail you can, it provides precision handling so you will be dominating those trails too.Features: Material: AL7050 Aluminium Width: 760mm Rise: 20mm Upsweep: 5 degrees Backsweep: 7 degrees Bar clamp diameter: 31.8mm Usage: All Mountain, EnduroBuy Truvativ Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Atmos 7k stem is a lightweight, performance stem designed for trail and cross-country use and is the lightest stem in the Atmos range. Featuring a rise or drop of 6° depending on your preference, it is also available in 6 different lengths depending on your sizing needs. All fasteners are adjustable via a t25 tool for easy, quick adjustments. The Atmos 7k also features an integrated Go-Pro mount. 40,50,60,70,80,90mm lengths±6° angleIntegrated GoPro mountT25 fasteners for 1 tool across the cockpit
The Atmos 7k aluminium riser bar series feature a 9° back sweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminium, the bar weighs just 250g at full width.760mm wideWide to start and trimmable by 30mm each sideMade from tough 7050 lightweight aluminiumSpecifications:Clamp diameter: 31.8mmWidth: 760mmMaterial (HB): Al-7050Colour/finish (HB): Blast BlackRise (HB): 0mm, 10mm or 20mmApplication (HB): XCType (bar): RiserBack sweep (degrees): 9Upsweep (degree): 5
The Atmos 7k aluminium riser bar series feature a 9° back sweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminium, the bar weighs just 250g at full width.760mm wideWide to start and trimmable by 30mm each sideMade from tough 7050 lightweight aluminiumSpecifications:Clamp diameter: 31.8mmWidth: 760mmMaterial (HB): Al-7050Colour/finish (HB): Blast BlackRise (HB): 0mm, 10mm or 20mmApplication (HB): XCType (bar): RiserBack sweep (degrees): 9Upsweep (degree): 5
The Descendant grip is for the performance-driven hard charger who needs maximum grip and confidence in their cockpit. Single-ring clamp for max width and comfortAvailable in Black, Gray, Gum Rubber, Red, Gray/Black Marble and Red/Black MarbleSoft and durable ridged rubber grip patternFeaturing a full-width contact area that extends from the inner clamp right to the end of the bar. The ridged pattern allows for a soft-to-touch feel and makes for superior grip and control. Available in solid colours, marble and gum options, these grips give you the option to match grip performance with your personal style.
The Descendant grip is for the performance-driven hard charger who needs maximum grip and confidence in their cockpit. Single-ring clamp for max width and comfortAvailable in Black, Gray, Gum Rubber, Red, Gray/Black Marble and Red/Black MarbleSoft and durable ridged rubber grip patternFeaturing a full-width contact area that extends from the inner clamp right to the end of the bar. The ridged pattern allows for a soft-to-touch feel and makes for superior grip and control. Available in solid colours, marble and gum options, these grips give you the option to match grip performance with your personal style.
The Descendant grip is for the performance-driven hard charger who needs maximum grip and confidence in their cockpit. Single-ring clamp for max width and comfortAvailable in Black, Gray, Gum Rubber, Red, Gray/Black Marble and Red/Black MarbleSoft and durable ridged rubber grip patternFeaturing a full-width contact area that extends from the inner clamp right to the end of the bar. The ridged pattern allows for a soft-to-touch feel and makes for superior grip and control. Available in solid colours, marble and gum options, these grips give you the option to match grip performance with your personal style.
The Descendant grip is for the performance-driven hard charger who needs maximum grip and confidence in their cockpit. Single-ring clamp for max width and comfortAvailable in Black, Gray, Gum Rubber, Red, Gray/Black Marble and Red/Black MarbleSoft and durable ridged rubber grip patternFeaturing a full-width contact area that extends from the inner clamp right to the end of the bar. The ridged pattern allows for a soft-to-touch feel and makes for superior grip and control. Available in solid colours, marble and gum options, these grips give you the option to match grip performance with your personal style.
The Truvativ Giga Pipe Team SL has a heat treated chromoly spindle and alloy cups. The Team SL is around 80 grams ligther than the DH Version.
Truvativ Descendant 35mm Riser BarsThe Descendant 35mm Riser has been specially designed with downhill and enduro riders in mind. It boasts an ultra-durable Al-7050 aluminium construction alongside a 760mm width for stiff, accurate and positive steering. This is an ideal choice of replacement or upgrade for pushing your performance to the max.Features: Material: Al-7050 Aluminium Usage: Downhill; Enduro Width: 760mm Upsweep: 5 degrees Backsweep: 7 degrees Rise: 25mm Bar Clamp Diameter: 35mm Weight: 310gBuy Truvativ Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Truvativ Descendant Mountain Bike Riser BarsTruvativ Decendant DH MTB Riser Handlebar draws from the rich heritage of Truvativ's championship winning bars of the past, but also introduce subtle yet effective changes to suit today's more confident and aggressive riders. Super wide at 800mm and constructed from tough AL 7050 aluminium, the Descendant DH bars will provide you with stiff and precise control, no matter how extreme the trail gets.Features: Material: AL7050 Aluminium Finish: Blast black Width: 800mm Rise: 25mm Upsweep: 5 degrees Backsweep: 9 degrees Bar clamp diameter: 31.8mm Usage: Freeride, DownhillBuy Truvativ Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Truvativ Giga Pipe Team DH has a heat treated chromoly spindle and alloy cups. The Team DH is a downhill specific bottom bracket with ISIS drive.
Truvativ crank arm bolt and self-extractor cap with washer. The bolt/cap is made from aluminium. Bolt fits GXP bottom brackets. The bolt that screws into the crank spindle is M15 size and the outer cap which screws into your crank arm is M22 size. Available in silver colour.Fits GXP bottom brackets,Made of aluminium,Comes with self-extractor cap and washer,Bolt size is M15; cap size is M22.
SHARPENED FOR SPEEDThe STYLO 6K crankset delivers consistent performance every time out. Featuring SRAMs X-SYNC™2 tooth profile chainring, the STYLO crankset is engineered for complete chain control. Each tooths thickness is precisely toleranced and controlled to work seamlessly with the SRAM chains inner and outer links. DUB™ technology features a better-engineered bottom bracket and a new spindle design. Together, these allow for a more uniform approach to bottom bracket fitment, better sealing against contamination and forward and backward compatibility. Now everyone can benefit from a new measure of durability.THINGS TO REMEMBER• The STYLO 6K crankset is compatible with the SRAM 1x™ drivetrain systems • Featuring SRAM’s X-SYNC™2 tooth profile • The STYLO crankset is engineered for complete chain control • Most affordable aluminum X-SYNC™2 direct mount cranksetFEATURES AND BENEFITS• 6000 series forged aluminum arms • DUB™ technology features a uniform approach to bottom bracket fitment, better sealing against contamination and is forward and backward compatible. • ISO 4210 compliant. See Declaration of Conformity for details SPECIFICATIONSSpeeds: 11/12BB Compatibility: DUB BSA73, DUB PF89.5, DUB PF92, DUB PF30 MTB73, DUB BB30 MTB73Chainring Size: 32Crank arm length: 170mm, 175mmChain line: 49.0mm, 52.0mmBB Spindle Interface: DUBChainring material: SteelGuard: No GuardBolt Circle Diameter (BCD): Direct Mount (DM)Crank arm material: AluminiumColour (Crank arm): Black
BORN FROM THE MOUNTAINThe Descendant 6K crankset delivers consistent performance every time out. Featuring SRAMs X-SYNC™2 tooth profile chainring, the Descendant crankset is engineered for complete chain control. Each tooths thickness is precisely toleranced and controlled to work seamlessly with the SRAM chains inner and outer links. DUB™ technology features a better-engineered bottom bracket and a new spindle design. Together, these allow for a more uniform approach to bottom bracket fitment, better sealing against contamination and forward and backward compatibility. Now everyone can benefit from a new measure of durability.THINGS TO REMEMBER• The DESCENDANT 6K crankset is compatible with the SRAM Eagle™ drivetrain systems • Featuring SRAM’s X-SYNC™2 tooth profile • The DESCENDANT crankset is engineered for complete chain control. • Most affordable aluminum X-SYNC™ direct mount cranksetFEATURES AND BENEFITS• Optimized 6000 series forged aluminum arms • DUB™ technology features a uniform approach to bottom bracket fitment, better sealing against contamination and is forward and backward compatible. • ISO 4210 compliant. See Declaration of Conformity for details SPECIFICATIONSSpeeds: 11/12BB Compatibility: DUB BSA73, DUB PF89.5, DUB PF92, DUB PF30 MTB73, DUB BB30 MTB73Chainring Size: 32Crank arm length: 170mm, 175mmChain line: 49.0mm, 52.0mmBB Spindle Interface: DUBChainring material: SteelGuard: No GuardBolt Circle Diameter (BCD): Direct Mount (DM)Crank arm material: AluminiumColour (Crank arm): Black
BORN FROM THE MOUNTAINThe svelte strength of carbon fiber with the swagger of heavy metal. The Descendant carbon crankset uses a proprietary TRUVATIV carbon construction process that delivers a crankset light enough for XC, yet bold and badass enough for Enduro. Style and substance - Descendant. DUB™ technology features a better-engineered bottom bracket and a new spindle design. Together, these allow for a more uniform approach to bottom bracket fitment, better sealing against contamination and forward and backward compatibility. Now everyone can benefit from a new measure of durability.THINGS TO REMEMBER• Less weight with Direct Mount ring • Most affordable carbon crankset in the industryFEATURES AND BENEFITS• Carbon construction for lightweight durability • DUB™ technology features a uniform approach to bottom bracket fitment, better sealing against contamination and is forward and backward compatible. • Fully compatible with any 1x drivetrain • DUB™ technology features a uniform approach to bottom bracket fitment, better sealing against contamination and is forward and backward compatibleSPECIFICATIONSSpeeds: 11/12BB Compatibility: DUB BSA73, DUB PF89.5, DUB PF92, DUB PF30 MTB73, DUB BB30 MTB73Chainring Size: 32Crank arm length: 170mm, 175mmChain line: 49.0mm, 52.0mmBB Spindle Interface: DUBChainring material: AluminiumGuard: No GuardBolt Circle Diameter (BCD): Direct Mount (DM)Crank arm material: CarbonColour (Crank arm): Black
Labeling and Finish mesh perfectly with SRAM drivetrain families. Forged arms increases the strength and reliability paired with SRAM's smooth shifting 8- and 9-speed chainrings - give you the best combination of looks, performance and price.SRAM's proven Power Spline and classic square BB interfaces are available. Intended to compliment the X4 and X5 Families.
Truvativ Chain Ring Bolt Kit 4 Arm for Single No Guard Steel Black.,