The Troy Lee Designs Stage full face helmet with MIPS is a lighter, cooler and more protective enduro racing package than anything previously created.The Stage combines MIPS (Multi-directional Impact Protection System), EPP (for slow speed impacts) and EPS (for high-speed impacts) in one sleek package, that sets the standard for mountain bike enduro helmets.A Polylite shell with fibre reinforcement and Polyacrilite injected chin bar with EXOskeleton adds strength without sacrificing weight.11 high-flow air intakes and 14 exhaust ports and large ventilation chin bar openings aid in cooling and comfort in all conditions.The TLD Stage Helmet also includes an X-Static® helmet liner that is moisture-wicking, quick-drying and odor-fighting. A Fidlock® buckle and lightweight hardware round out the overall package.Key FeaturesPolylite Shell construction with fibre reinforcement,Dual-density EPS and EPP foam offers protection against high and low-speed impacts,Featuring MIPS Brain Protection System: a helmet integrated, low friction layer designed to reduce rotational motion transferred to the brain from angled impacts to the head,Large ventilation chin bar opening and 11 high-flow intake ports and 14 exhaust vents,Contoured 3D XT2 cheek pads and washable X-Static liner create an optimized fit,Innovative break-away visor screws,Fidlock® magnetic buckle system,Includes TLD helmet bag.
Young gravity addicts will love the Troy Lee Designs Youth Rogue Elbow Hard Shell Guards, which will protect their elbow and forearm as they hurl themselves downhill.Like a standard cycling helmet, it’s composed of a hard-shell plastic outer layer that disperses impact over a large area, while allowing heat and moisture to escape through spaced vent holes, and a soft EVA foam inner layer, which absorbs and lessens that impact. The two layers, working together as part of a highly flexible, comfortable and breathable pad, will reinforce your young ripper’s elbow joint while allowing them to move freely, so that they’ll barely notice they’re wearing a guard.A stretchy sleeve of material extends from one side of the pad to the other, acting as a cradle for the inner arm and helping to hold the pad in place. The pad can also be cinched snugly round the arm using two adjustable straps.Perfect for giving youngsters the confidence to ride their best, it comes with its own protective, mesh lined bag that will keep it fresh between sessions. Key Features:CE certified to EN 1621-1 Level 1 standard,Ventilated hard shell plastic outer layer,Soft, EVA foam inner layer,Adjustable elastic strips for a secure fit,Sold as a pair, left and right.
The Troy Lee Designs 6400 Knee Brace is a lightweight and comfortable brace for any rider needing stability and protection for their knees.The 6400 Knee Brace has bilateral support hinges that use hyperextension stops to support and help prevent knee injury. The X-Fit Strap System prevents bunching that could limit movement and create discomfort while out on the trails. Adjustment upper and lower compression straps allow a customised fit. Thermoplastic knee pads are covered in an abrasion resistant material for durability and longevity. This brace is ideal for anyone riding mountain bike but is also usable for snowboarding, skiing, and motocross.Key Features: X-Fit Strap System, Bilateral Support hinges and impact absorbing base pads, Thermoplastic knee protection, Compression fit straps for tailored fit, Abrasion resistant kneecap, Moisture-wicking frame liners, Sold in pairs – left and right, 1-year limited warranty. .
The Troy Lee Designs Rockfight CE Chest Protector isn’t your typical chest protector. TLD has taken its standard Rockfight but souped it up to withstand whatever the elements throw at you.The base Rockfight has built-in EPP on the chest and spine that manages low-speed impacts but the Rockfight CE combines it with a removable, flexible D30 back insert for harder impacts. In the process, Troy Lee Designs has created a chest protector that exceeds CE EN1621 Level 1 for impact absorptions.The Rockfight CE has a CE EN14021 Stone Shield certificated front plate providing protection from roost and lofted debris that might come flying your way on the trails.The Rockfight CE achieves its superb protection while ensuring an ergonomic and breathable design. It has form fit side plates, fully adjustable shoulder straps, and removable shoulder pads and allows neck brace compatibility on most models.The construction is also featherweight and with a streamlined fit for easy wearing underneath a jersey and to minimise fatigue, so you can keep riding all day.Key Features: CE EN14021 Stone Shield certification of front plate for proven protection from debris, Flexible D30 back inserts that exceed CE EN1621 Level 1 for impact absorption, Advanced integrated EPP in key impact zones on chest and spine, Form fit side flex plates, fully adjustable fore/aft shoulder straps and removable shoulder pads allows neck brace compatibility, Featherweight construction and streamlined form fit for reduced rider fatigue and sub jersey fitment, Ultra-ventilated protective plates coupled with engineered channelled bi-foam for increased laminar airflow.
The D4 Carbon helmet is the latest in the legendary Troy Lee Designs Daytona series. The D4 Carbon builds on the success of the best full face helmets ever to be the most advanced downhill, freeride, and BMX helmet going. It is sure to continue the legend and pro success of Troy Lee Designs D3 and is the go-to for anyone seeking the very best.The D4 Carbon helmet has a TeXtreme carbon fibre shell. The carbon has a spread tow construction that uses straighter fibres than standard carbon fibre. This results in a thinner laminate that reduces weight while achieving a greater rigidness, increased strength, and improved impact tolerance.The MIPS Brain Protection System in the D4 means the Troy Lee helmet delivers ultimate protection. MIPS is a layer in the helmet that allows the head to slide relative to the helmet. This reduces any rotational movement that would affect the brain.A collarbone suspension system improves safety by directing pressure away from the collarbone in case of any tumbles.As a result, The D4 has the most protective energy system Troy Lee Designs has ever given its riders. The new full face mtb helmet is certified to CPSC 1203, CE EN1078, ASTM F1952 (DH), and ASTM 2032 (BMX) safety standards.Top protection, badass looks, and a pedigree that no one can touch. The D4 is set to continue Troy Lee Design’s legacy for years to come.Key Features:TeXtreme® Spread tow carbon fibre shell,MIPS Brain Protection System,Ventilation channels and headliner promote airflow,Lightweight titanium D-rings and hardware,Collarbone suspension system,Break-away visor screws,Quick release XT2 3D cheek pads and X-static/XT2 washable liner,Includes TLD drawstring helmet bag,1000g.
Troy Lee Designs’ all-new A3 helmet builds on the success of the TLD A2 helmet to deliver the ultimate in full coverage premium trail helmets.Safety is front and centre with the A3. The helmet is made from EPS and EPP foams for equal protection across high and low-speed impacts. The A3 uses MIPS technology to offer the best protection. The A3 also extends lower than previous TLD helmets, to offer the best lower head coverage.Every detail of the A3 has been obsessed over. The adjustable visor has goggle storage and attaches in three positions with magnets, so it is easy to move as well as avoiding any small parts breaking. The helmet closes with a V2 Fidlock-Magnetic Buckle for easy on and off. TLD has also made sure the helmet works with a vast array of optics making it a great choice for riders, regardless of eyewear choice.Key FeaturesThe latest evolution in TLD trail helmets with MIPS Technology,Adjustable visor with goggle storage and Automatic Magnet System,EPS and EPP for high-speed and low-speed impact energy management,Smart shear visor screws to prevent damage to the helmet,TLD V3 precision fit with 3 levels of height adjust,TLD’s deepest coverage half shell helmet,16 vents with optimised channelling for breathability,Removeable Sweatglide system for hygiene,2-piece antimicrobial and quick dry liner,V2 Fidlock-Magnetic Buckle,Weight: ~375g.
Always EvolvingIt wasn't easy to improve upon the class-leading design and function of our D3 helmet, but we made it happen. Built with an aerospace shell design and materials, we were able to get the D4 Composite helmet to 1050 grams without sacrificing any strength. MIPS C2 protection system is used to add an additional layer of safety in the event of a fall. For comfort, the D4 Comp routes cooling air through a front air intake system that flows through the polymer center and power grid side mesh keeping your head cooler during the ride. X-static® and XT2® anti-microbial/anti-odor padding keep the inside of the helmet a much nicer place to be. Key Features: Intended for BMX, Downhill or All-Mountain use,Aerospace composite shell,Lightest Composite DH/BMX Race helmet we have ever built 1050g (+/- 50g and Size M),MIPS C2 brain protection system-protects against rotational impacts,24 total vents: 10 front intake ports, 5 overhead intake vents that channel air on top of your head and an industry leading 7 rear exhaust ports,3 Shell sizes and 3 EPS sizes, 6 total size ranges from XS-XXL,Anti-Microbial/Quick Dry XT2® Quick release contoured 3D cheek pads create an ,anatomically optimized fit. Separately placed X-Static® & XT2® precision fit headliner with 7 anchor points gives you optimal fit,EPP Collarbone impact system; a relief area reduces the forces in the center lower section of the helmet where shoulder/collarbone impacts have been known to occur,Drawstring helmet bag included, 3-year warranty,CERTIFIED FOR: ASTM F1952 DH MTB, ASTM F2032 BMX, CPSC 1203, CE N1078, AS/NZS 2063.
The Troy Lee Designs Youth Speed Elbow Sleeve is a full-length sleeve designed to protect the arms of budding mountain bikers on the trails. Constructed from sturdy, 4mm D3O® abrasion resistant material, silicone grippers ensure it will stay right where it’s most needed. Despite its hardiness, young shredders will find this ultra-light sleeve breathable and comfortable enough to forget about all day, thanks to its flexibility and the inclusion of a breathable mesh panel. It will remain wonderfully supple right up until its strength is demanded, when the D3O® will harden to disperse energy and keep budding MTB aficionados safe. Key Features:D3O® 4mm ultra-lightweight, abrasion resistant yet flexible elbow pad,Silicone grippers hold it firmly but gently in place,Breathable mesh panel ensures breathability and comfort,CE EN 13688:2013 Certified ,Reflective logos ,Sold as a pair, left and right.
The Troy Lee Designs Youth Rogue Knee/Shin Guards will defend the knees and shins of young gravity addicts as they hurl themselves downhill.Like a standard cycling helmet, it’s composed of a hard-shell plastic outer layer that disperses impact over a large area, while allowing heat and moisture to disperse through spaced vent holes, and a soft EVA foam inner layer, which absorbs and lessens that impact. The two layers, working together as part of a highly flexible, comfortable and breathable pad, will reinforce the front of young rippers’ legs while allowing free movement, so that they’ll barely notice they’re wearing a guard. They’ll also be able to cinch it round their leg snugly using two adjustable straps. Perfect for giving downhill stars of the future the confidence they need to ride their best, the Youth Rogue Knee/Shin guard comes with its own protective, mesh lined bag that will keep it fresh between sessions. Key Features:CE certified to EN 1621-1 Level 1 standard,Ventilated hard shell plastic outer layer ,Soft, EVA foam inner layer,Two adjustable elastic strips for a secure fit,Sold as a pair, left and right.
The Troy Lee Designs Raid Knee Guards are hardy enough to offer you peace of mind on the gnarliest trails, but also comfortable and ventilated enough to be a pleasure to wear for a full day of shredding. Constructed from vented Neoprene, with D3O® reinforcement, the sleeve will defend your lower thigh, knee joint and shin. Thanks to strategically placed grippers, you can count on it to reinforce your leg in the areas where it’s most needed. In particular, this guard features abrasion resistant pads at the side and over the kneecap and offers side impact protection. The best knee guards are more than barriers, though, they’re wearable so that they’ll always be in place when you need them. The breathable mesh back, thoughtful areas of padding and adjustable fit of the Raid Knee Guard mean it will keep your leg dry, snug and protected.Meanwhile, a flex gusset will allow your leg to straighten without resistance, while a rear compression band stimulates the muscles and encourages function. As a further bonus, the Raid Knee Guard comes with its own protective, mesh lined bag that will keep it fresh between sessions.Key FeaturesD3O® liner CE certified to EN 1621-1 Level 1 standard,Made from vented Neoprene,Breathable, wicking mesh rear panel,Tough, abrasion-resistant kneecap and side pads, side impact protection,Held in place by silicone gripper band at upper leg,Reinforced by adjustable Velcro strap,Sold as a pair, left and right.
The Rockfight Chest Protector is the lightest upper body protection Troy Lee Designs has ever created. Packed full of the features, the mountain bike chest protector incorporates strategically placed EPP on the chest and spine while allowing unrestricted airflow and complete fit customisation.The Rockfight has a CE EN14021 Stone Shield certificated front plate providing protection from roost and lofted debris that might come flying your way on the trails.The Rockfight has form fit side plates, fully adjustable shoulder straps, and removable shoulder pads and allows neck brace compatibility on most models.Ultra-ventilated protective plates in the back are paired with channelled bio-foam for increased laminar airflow, so air travels smoothly cooling you better.The construction is also featherweight and with a streamlined fit for easy wearing underneath a jersey and to minimise fatigue, so you can keep riding all day.Key Features: CE EN14021 Stone Shield certification of front plate for proven protection from debris,Advanced integrated EPP in key impact zones on chest and spine,Form fit side flex plates, fully adjustable fore/aft shoulder straps and removable shoulder pads allows neck brace compatibility,Featherweight construction and streamlined form fit for reduced rider fatigue and sub jersey fitment,Ultra-ventilated protective plates coupled with engineered channelled bi-foam for increased laminar airflow.
Troy Lee Designs’ all-new A3 helmet builds on the success of the TLD A2 helmet to deliver the ultimate in full coverage premium trail helmets.Safety is front and centre with the A3. The helmet is made from EPS and EPP foams for equal protection across high and low-speed impacts. The A3 uses MIPS technology to offer the best protection. The A3 also extends lower than previous TLD helmets, to offer the best lower head coverage.Every detail of the A3 has been obsessed over. The adjustable visor has goggle storage and attaches in three positions with magnets, so it is easy to move as well as avoiding any small parts breaking. The helmet closes with a V2 Fidlock-Magnetic Buckle for easy on and off. TLD has also made sure the helmet works with a vast array of optics making it a great choice for riders, regardless of eyewear choice.Key FeaturesThe latest evolution in TLD trail helmets with MIPS Technology,Adjustable visor with goggle storage and Automatic Magnet System,EPS and EPP for high-speed and low-speed impact energy management,Smart shear visor screws to prevent damage to the helmet,TLD V3 precision fit with 3 levels of height adjust,TLD’s deepest coverage half shell helmet,16 vents with optimised channelling for breathability,Removeable Sweatglide system for hygiene,2-piece antimicrobial and quick dry liner,V2 Fidlock-Magnetic Buckle,Weight: ~375g.
After years of research and development, Troy Lee Designs introduced the A1 mountain bike helmet in 2013.This lightweight, fully encapsulated all-mountain helmet utilizes maximum coverage and dimension to keep you safe and protected in all riding conditions. Whether you're charging single track, riding dirt jumps or grinding out miles on the XC bike, the A1 helmet offers the premium fit, protection and style you want. Key Features: Reinforced polycarbonate shell in-molded with the EPS liner extends down the sides and back of the head for maximum protection and durability, 8 pressurized intake passages draw in cool air for maximum ventilation, 8 rear vacuum vortex outlets help exhaust and draw heat from the head, Triple position adjustable retention system allows customized fit for various eyewear, head shape and riding styles, Single-piece, ultra-plush, removable and washable comfort liner made of anti-microbial moisture-wicking material for a dry, comfortable feel, Full-spectrum adjustable moto inspired visor with anodized aluminum hardware.
Design and FunctionD3 Fiberlite features many of the racing-derived features found on its top-shelf D3 Carbon and Composite siblings. The D3 Fiberlite sources a lightweight fiberglass shell with wind-tunnel proven aerodynamics and an efficient ventilation system. The Fiberlite also delivers a comfy, secure fit from its 3D cheek pads, as well as TLD's signature styling and attention-grabbing graphics. Thanks to the D3 Fiberlite, the most decorated helmet in professional racing is now available for riders who crave factory performance. Key Features: Intended for BMX, Downhill or All-Mountain use,Lightweight Fiberglass shell construction with an overall helmet weight of 1225 grams,20 high-flow intake and exhaust ports for maximum ventilation,Added EPS and new head-form shape for improved impact performance,Quick-release cheek pads for emergency helmet removal,Exceeds bicycle certifications: ASTM F1952-15, ASTM F2032-15,Not intended for use with motorized vehicles.
If you’re a gravity addict, the Troy Lee Designs Rogue Knee/Shin Guards will defend your knees and shins as you hurl yourself downhill.Like a standard cycling helmet, it’s composed of a hard-shell plastic outer layer that disperses impact over a large area, while allowing heat and moisture to disperse through spaced vent holes, and a soft EVA foam inner layer, which absorbs and lessens that impact. The two layers, working together as part of a highly flexible, comfortable and breathable pad, will reinforce your leg while allowing it to move freely, so that you’ll barely notice you’re wearing a guard. You can also cinch it round your leg snugly using two adjustable straps.Perfect for giving you the confidence to ride your fastest, it comes with its own protective, mesh lined bag that will keep it fresh between sessions. Key Features:CE certified to EN 1621-1 Level 1 standard,Ventilated hard shell plastic outer layer,Soft, EVA foam inner layer,Adjustable elastic strips for a secure fit,Sold as a pair, left and right.
The Flowline SE MIPS Helmet, Troy Lee Designs’ new half shell trail helmet, includes some of the best technology Troy Lee Designs has to offer. Sporting a modern, minimalist look, it is designed to keep you safe and comfortable on the trail.All in all, this helmet offers incredible value, protection, comfort and performance in the form of a sleek, understated bi-colour helmet that will nonetheless make a statement on the trails or in the bike park, thanks to Troy Lee’s famously contemporary styling.Key FeaturesWith MIPS technology to protect against rotational forces,Dual density EPS foam guards against high and low speed impacts,Outer shell strengthened by full wrap, in-mould construction,Extended coverage guards the back of your head,Easy to size using the TLD precision fit system,14 high-flow ventilation ports keep your head cool and dry,With soft, antimicrobial comfort liner,Fidlock magnetic buckle system of easy on-off,With 2-way adjustable, screwless visor.
Standing out from the crowd with Troy Lee’s legendary styling, the Flowline MIPS Helmet features much of Troy Lee Designs’ best technology at a low price. Sporting a modern, minimalist look, it is designed to keep you protected and comfortable on the singletrack.This is a great value, modern and clean-looking helmet that offers incredible safety features, a great fit and all-day comfort in a package that is sure to attract admiring looks on the trail.Key FeaturesMIPS technology to protect against rotational forces,EPS foam guards against high speed impacts,Outer shell strengthened by full wrap, in-mould construction,Extended coverage guards the back of your head,Easy to size using the TLD precision fit system,14 high-flow ventilation ports keep your head cool and dry,With soft, replaceable liner,Bears 2-way adjustable, screwless visor.
Troy Lee's best-selling Jersey is easy to wear and with supreme comfort. The Skyline Long Sleeve jersey is a relaxed fit technical jersey made of newly developed poly spandex blend with a new fit combined with colours and graphics that are easier to wear for riders of all types.Key Features: Relax fit mountain bike jersey, casual in nature, technical by design ,Compact left side zip pocket, with reflective TLD logo. ,Optical wipe inside .Materials: 92% Polyester/8% Spandex ,Moisture-wicking/quick dry ,Fabric weight 140gm/7.9oz ,Fabric is certified as Bluesign approved.
Key Features: Water resistant trail jacket, Materials - 91% polyester, 9% spandex ,Compact - can fold up into bag and can be stored on bike or pocket .
Already without rival in the number of professional Downhill and BMX race wins collected over the years. Focusing on how the kit fits and feels on the bike we have revised articulation points and used lighter, more durable materials in the pants and shorts. All helping to make the Sprint kit even more race ready. Key Features: TLD Race Fit - Mid-rise waist, roomier cut with a balance of performance and durability, 90% Polyester/10% Spandex construction is both lightweight and durable, Redesigned knee zone features a slimmer profile without inhibiting protection while permitting improved articulation for better movement and pedaling capabilities, More durable stretch fabric across the quads and around the rear of the shorts provide additional abrasion resistance in the event of a crash, Optimized rear mesh panels along the calves improve range of motion while increasing ventilation, Increased resistance to chain abrasion through sonic welded thermo skin applied to the lower right inside ankle, New side waist adjusters with Velcro inset into the body of the waist band allow for fit adjustments to be quick and unobtrusive, Zipper flap design keeps mud and debris out, Single TLD embossed low profile snap button that wont get hung up on your jersey; Velcro backing ensures jersey stays tucked-in, Two strategically placed zipper pockets; 1 on the upper left leg, 1 positioned on the lower right hamstring area, Tapered lower leg design keeps pant away from chain/seat stays, Race fit engineered to accommodate base layer protection while maintaining maximum freedom of movement and pedaling, Fabric is certified as Bluesign approved .