Thomson s new 35mm x 800mm wide bar comes in 3 rise options: a centre rise 10mm, 20mm, or 35mm rise options. All 35mm bars feature a 9° back sweep and 5° upsweep. They re built using 7050 Aluminium alloy for strength and longevity.Centre Rise: 10mm, 20mm and 25mmBack sweep: 9 degreesUpsweep: 5 degrees7050 AluminiumButted & tapered for optimal fatigue lifeAdvanced Hydraulic Press formingThe Elite 35mm Handlebars are butted and tapered in many steps for optimal fatigue life. Unlike most companies, Thomson produced our bars by using advanced hydraulic press forming to ensure close tolerances, precise wall thicknesses and a smooth appearance in the bends and tapered sections. Together with a 35mm Thomson X4 stem, it s the best Aluminium cockpit in the industry.
Thomson s new 35mm x 800mm wide bar comes in 3 rise options: a centre rise 10mm, 20mm, or 35mm rise options. All 35mm bars feature a 9° back sweep and 5° upsweep. They re built using 7050 Aluminium alloy for strength and longevity.Centre Rise: 10mm, 20mm and 25mmBack sweep: 9 degreesUpsweep: 5 degrees7050 AluminiumButted & tapered for optimal fatigue lifeAdvanced Hydraulic Press formingThe Elite 35mm Handlebars are butted and tapered in many steps for optimal fatigue life. Unlike most companies, Thomson produced our bars by using advanced hydraulic press forming to ensure close tolerances, precise wall thicknesses and a smooth appearance in the bends and tapered sections. Together with a 35mm Thomson X4 stem, it s the best Aluminium cockpit in the industry.
Thomson s new 35mm x 800mm wide bar comes in 3 rise options: a centre rise 10mm, 20mm, or 35mm rise options. All 35mm bars feature a 9° back sweep and 5° upsweep. They re built using 7050 Aluminium alloy for strength and longevity.Centre Rise: 10mm, 20mm and 25mmBack sweep: 9 degreesUpsweep: 5 degrees7050 AluminiumButted & tapered for optimal fatigue lifeAdvanced Hydraulic Press formingThe Elite 35mm Handlebars are butted and tapered in many steps for optimal fatigue life. Unlike most companies, Thomson produced our bars by using advanced hydraulic press forming to ensure close tolerances, precise wall thicknesses and a smooth appearance in the bends and tapered sections. Together with a 35mm Thomson X4 stem, it s the best Aluminium cockpit in the industry.
Our new 35mm x 800mm wide bar comes in 3 rise options: a centre rise 10mm, 20mm, or 35mm rise options. All 35mm bars feature a 9° backsweep and 5° upsweep. They’re built using 7050 Aluminium alloy for strength and longevity.The Elite 35mm Handlebars are butted and tapered in many steps for optimal fatigue life. Unlike most companies, Thomson produced our bars by using advanced hydraulic press forming to ensure close tolerances, precise wall thicknesses and a smooth appearance in the bends and tapered sections.Together with a 35mm Thomson X4 stem, it’s the best Aluminium cockpit in the industry.Key Features: Centre Rise: 10mm, 20mm and 25mm., Backsweep: 9 degrees., Upsweep: 5 degrees., 7050 Aluminium., Butted & tapered for optimal fatigue life., Advanced Hydraulic Press forming..
Too many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness. The Thomson 35mm X4 stem allows you to realize the benefits of stiffer forks and stiffer 35mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.Leader in strength and stiffnessPrecise steering, tracking and more riding controlTraditional, knee friendly steerer clampMachined 7050 AluminiumAvailable in 32mm, 40mm and 50mm lengthsCertified to: CEN ISO 4210-5The Thomson 35mm X4 is based on proven design. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently. This stem body is forged AL7050 where every surface is machined. The faceplate is forged from AL6066 and 100% machined. It s built and tested to the same standards as aerospace parts and it s the best stem for all-around mountain biking.
Too many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness. The Thomson 35mm X4 stem allows you to realize the benefits of stiffer forks and stiffer 35mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.Leader in strength and stiffnessPrecise steering, tracking and more riding controlTraditional, knee friendly steerer clampMachined 7050 AluminiumAvailable in 32mm, 40mm and 50mm lengthsCertified to: CEN ISO 4210-5The Thomson 35mm X4 is based on proven design. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently. This stem body is forged AL7050 where every surface is machined. The faceplate is forged from AL6066 and 100% machined. It s built and tested to the same standards as aerospace parts and it s the best stem for all-around mountain biking.
Too many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness. The Thomson 35mm X4 stem allows you to realize the benefits of stiffer forks and stiffer 35mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.Leader in strength and stiffnessPrecise steering, tracking and more riding controlTraditional, knee friendly steerer clampMachined 7050 AluminiumAvailable in 32mm, 40mm and 50mm lengthsCertified to: CEN ISO 4210-5The Thomson 35mm X4 is based on proven design. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently. This stem body is forged AL7050 where every surface is machined. The faceplate is forged from AL6066 and 100% machined. It s built and tested to the same standards as aerospace parts and it s the best stem for all-around mountain biking.
Key Features: Leader in strength and stiffness., Precise steering, tracking and more riding control., Traditional, knee friendly steerer clamp., Machined 7050 Aluminium., Available in 32mm, 40mm and 50mm lengths..
The Thomson Elite DH bar is 800mm wide with 20mm of rise, 9° of back sweep, and 5° of upsweep. It s built using 7050 Aluminium alloy for strength and long life. 65mm wide clamping area fits our Direct Mount stem, giving you the most torsional stiffness of any bar/stem combination. 31.8 centre section is absolutely straight over a width of 90mm. The long straight section in the middle reduces stress concentrations, especially when using wide Direct Mount stems.800mm width / 31.8mm7050 Aluminium AlloyLong, straight middle sectionThickened ends from 1.4mm to 1.6mmDeveloped by Hydraulic Press FormingLow weight, high fatigue lifePerfect with Thomson Elite X4 or Direct Mount StemsWeight 325gBars are butted and tapered in many steps for optimal fatigue life. Ends of the bar are thickened from 1.4 to 1.6mm to resist damage from impacts and contact with the ground. Bars are produced by advanced Hydraulic Press Forming to avoid the need for hand grinding. Almost all other bars are manually bent, and bends are ground to appear smooth. Hydraulic Press Forming ensures very consistent wall thickness and close tolerances, especially in tapered sections. This keeps weight low and fatigue life high. Together with a Thomson stem, this is the best Aluminium cockpit you can get. It s the perfect addition to your Elite X4 Stem or Direct Mount Stem.
Identical in alloy and construction to Thomson s Downhill bar, the new Trail bar is 750mm wide with 20mm of rise, 8° of back sweep, and 5° of up sweep. The clamping area is 50mm, allowing a different bend profile for a more compliant ride. The Trail bar gives you a light Aluminium all-around bar for your Mountain Bike.750mm width / 31.8mm7050 Aluminium AlloyVery durable and extremely strongThickened ends from 1.4 to 1.6mmDeveloped by Hydraulic Press FormingLightweightPerfect addition to Thomson's Elite X4 Stem or Direct Mount Stem
New in 2012 for Thomson the Direct Mount Stem allows riders the ultimate in stiffness for dual crown cockpits. The strongest stem we make, which means it’s the strongest stem you can get. Built for the Boxxer and any fork using the Boxxer bolt patternMotorcycle Style, Thomson Strength and attention to detail. Light weight and a dropped bar position. The 50mm Direct Mount puts the handlebar 10mm lower than a standard stem, and lower than an adjustable direct mount design as well. Our 40mm Direct Mount has a 30 degree rise. The crown in the picture is for display purposes and is not included with the stem
The Thomson Elite seatpost is the standard by which all other seatposts are judged. Forged clamps, integrally machined head, and an elliptically extruded 7000 series aluminum body have made the Elite and the Setback Elite the industry models for strength, light weight and ease of adjustment The Thomson Elite seatpost is the standard by which all other seatposts are judged. Forged clamps, integrally machined head, and an elliptically extruded 7000 series aluminum body make the Elite an industry standard. The 16mm setback option helps give precise fit for a wide range of bikes and riders The Thomson seatpost has a clamp, head, and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride. Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails
The stem that is strong enough for freestyle and light enough to race. 6 bolts up front to hold your bars no matter what.Reach: 50mmCan be flipped and run upside downWide Clamp - For Less Stress on your BarsCNC Machined from 7000 Series AluminumNew six bolt clamp
The design team for the new Thomson 31.8 stems had a tough goal: make a stem better than the Thomson Elite Road and Mountain Stems. Early tests showed us that Thomson competitors 31.8 stems were heavier and weaker than Thomson Elite 25.4 and 26.0 stems.The Thomson X4 for Mountain and X2 for Road allow you to realize the benefits of stiffer forks and stiffer 31.8 bars. They offer precise steering, tracking, and more control while riding, all wrapped up in a beautiful design.The Thomson X4 is stronger and 30 grams lighter than the Thomson Elite 25.4 mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. Light enough for Cross Country or Road is only part of the storyThe X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning freeride and downhill riders can run Thomson confidentlySM-E155B - for 1.5 inch headset.
Too many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness. The Thomson X4 stem allows you to realise the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.Leader in strength and stiffnessPrecise steering, tracking and more riding controlTraditional, knee friendly steerer clampOne piece 7000 series Aluminium31.8mm ClampMachined by Thomson, in Macon, GeorgiaAvailable in 45mm, 75mm and 95mm lengthsCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBThe Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently. The stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It s built and tested to the same standards as aerospace parts and it s the best stem for all-around mountain bike and cyclocross riding.
Too many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness. The Thomson X4 stem allows you to realise the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.Leader in strength and stiffnessPrecise steering, tracking and more riding controlTraditional, knee friendly steerer clampOne piece 7000 series Aluminium31.8mm ClampMachined by Thomson, in Macon, GeorgiaAvailable in 45mm, 75mm and 95mm lengthsCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBThe Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently. The stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It s built and tested to the same standards as aerospace parts and it s the best stem for all-around mountain bike and cyclocross riding.
Too many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness. The Thomson X4 stem allows you to realise the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.Leader in strength and stiffnessPrecise steering, tracking and more riding controlTraditional, knee friendly steerer clampOne piece 7000 series Aluminium31.8mm ClampMachined by Thomson, in Macon, GeorgiaAvailable in 45mm, 75mm and 95mm lengthsCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBThe Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently. The stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It s built and tested to the same standards as aerospace parts and it s the best stem for all-around mountain bike and cyclocross riding.
Too many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness. The Thomson X4 stem allows you to realize the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design. Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB The Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently. The stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It’s built and tested to the same standards as aerospace parts and it’s the best stem for all-around mountain bike and cyclocross riding. Precise steering, tracking and more riding control. Traditional, knee friendly steerer clamp. One piece 7000 series Aluminium. Machined by Thomson, in Macon, Georgia. Available in Black or Silver. Available from 40mm to 130mm lengths. 40-60mm stems are available in block style only..
Too many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness.Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBLeader in strength and stiffnessPrecise steering, tracking and more riding controlTraditional, knee friendly steerer clampOne piece 7000 series AluminiumMachined by Thomson, in Macon, GeorgiaThe Thomson X4 stem allows you to realize the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design. The Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently.The stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It s built and tested to the same standards as aerospace parts and it s the best stem for all-around mountain bike and cyclocross riding.
The Thomson X4 is the leader in strength and stiffness. The Thomson X4 stem allows you to realize the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.Leader in strength and stiffnessPrecise steering, tracking and more riding controlTraditional, knee friendly steerer clampOne piece 7000 series AluminiumMachined by Thomson, in Macon, GeorgiaAvailable from 70mm to 130mm lengthsCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBThe Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently. The stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It s built and tested to the same standards as aerospace parts.