The Dirt Drop Handlebars are Aluminium drop bars that bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths, each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 44cm and 46cm widths130mm Drop90mm Reach31.8mm Clamp25 degree Flare7000 series AluminiumThe road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.
The Dirt Drop Handlebars are Aluminium drop bars that bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths, each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 44cm and 46cm widths130mm Drop90mm Reach31.8mm Clamp25 degree Flare7000 series AluminiumThe road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.
Thomson s new 35mm x 800mm wide bar comes in 3 rise options: a centre rise 10mm, 20mm, or 35mm rise options. All 35mm bars feature a 9° back sweep and 5° upsweep. They re built using 7050 Aluminium alloy for strength and longevity.Centre Rise: 10mm, 20mm and 25mmBack sweep: 9 degreesUpsweep: 5 degrees7050 AluminiumButted & tapered for optimal fatigue lifeAdvanced Hydraulic Press formingThe Elite 35mm Handlebars are butted and tapered in many steps for optimal fatigue life. Unlike most companies, Thomson produced our bars by using advanced hydraulic press forming to ensure close tolerances, precise wall thicknesses and a smooth appearance in the bends and tapered sections. Together with a 35mm Thomson X4 stem, it s the best Aluminium cockpit in the industry.
Thomson s new 35mm x 800mm wide bar comes in 3 rise options: a centre rise 10mm, 20mm, or 35mm rise options. All 35mm bars feature a 9° back sweep and 5° upsweep. They re built using 7050 Aluminium alloy for strength and longevity.Centre Rise: 10mm, 20mm and 25mmBack sweep: 9 degreesUpsweep: 5 degrees7050 AluminiumButted & tapered for optimal fatigue lifeAdvanced Hydraulic Press formingThe Elite 35mm Handlebars are butted and tapered in many steps for optimal fatigue life. Unlike most companies, Thomson produced our bars by using advanced hydraulic press forming to ensure close tolerances, precise wall thicknesses and a smooth appearance in the bends and tapered sections. Together with a 35mm Thomson X4 stem, it s the best Aluminium cockpit in the industry.
Thomson s new 35mm x 800mm wide bar comes in 3 rise options: a centre rise 10mm, 20mm, or 35mm rise options. All 35mm bars feature a 9° back sweep and 5° upsweep. They re built using 7050 Aluminium alloy for strength and longevity.Centre Rise: 10mm, 20mm and 25mmBack sweep: 9 degreesUpsweep: 5 degrees7050 AluminiumButted & tapered for optimal fatigue lifeAdvanced Hydraulic Press formingThe Elite 35mm Handlebars are butted and tapered in many steps for optimal fatigue life. Unlike most companies, Thomson produced our bars by using advanced hydraulic press forming to ensure close tolerances, precise wall thicknesses and a smooth appearance in the bends and tapered sections. Together with a 35mm Thomson X4 stem, it s the best Aluminium cockpit in the industry.
The Thomson Carbon 35mm Riser Handlebar is 800mm wide, offering 10mm and 20mm of centre rise together with a 9° back sweep and 5° upsweep. Built for strength with enough flex built in for all day comfort. Strong enough for all mountain/trail riding and light enough for racing.Centre Rise: 10mm and 20mm optionsBack sweep: 9 degreesUp sweep: 5 degreesToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe bars are made with three different fibre types with different tensile strength and tensile modulus, including high strength carbon fibres. This helps to allocate stiffness and flex where needed. They are moulded with an EPS mandrel inside to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflated nylon bladders.All carbon fibre material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibres from shortening the bar or impact with the ground. With a lightweight and precision tolerance clamp sections, it s the best bar for your Thomson X4 stem. It s also certified to EN, tested to DIN+.
The Thomson Carbon 35mm Riser Handlebar is 800mm wide, offering 10mm and 20mm of centre rise together with a 9° back sweep and 5° upsweep. Built for strength with enough flex built in for all day comfort. Strong enough for all mountain/trail riding and light enough for racing.Centre Rise: 10mm and 20mm optionsBack sweep: 9 degreesUp sweep: 5 degreesToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe bars are made with three different fibre types with different tensile strength and tensile modulus, including high strength carbon fibres. This helps to allocate stiffness and flex where needed. They are moulded with an EPS mandrel inside to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflated nylon bladders.All carbon fibre material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibres from shortening the bar or impact with the ground. With a lightweight and precision tolerance clamp sections, it s the best bar for your Thomson X4 stem. It s also certified to EN, tested to DIN+.
The Thomson Carbon Fibre drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths, each made from Carbon Fibre produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Available in 44cm and 46cm widths130mm Drop90mm Reach31.8mm Clamp25 degree FlareToray grade Carbon FibreThe wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.
The Thomson Carbon Fibre drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths, each made from Carbon Fibre produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Available in 44cm and 46cm widths130mm Drop90mm Reach31.8mm Clamp25 degree FlareToray grade Carbon FibreThe wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.
The Thomson Seatpost Collar has several features that make it distinct. The collar utilises the Thomson Seatpost bolt, washer and barrel nut combination that has proven strong over the years. This fastener combination allows float on both sides of the collar slot ensuring consistent clamping force. The bolt hole angle, height of the collar and offset slot all help create a collar that generates maximum clamping force at only 25-inch pounds of fastener torque. The Thomson Seatpost Collar is made from the same 7000 series alloy as our seatposts and stems, giving you the high performance and long life, you expect from a Thomson.7000 series AluminiumBolt, Washer, and Barrel Nut fastening combinationAvailable in 28.6mm, 29.8mm, 31.8mm, 34.9mm and 36.4mm diameters
The Thomson Seatpost Collar has several features that make it distinct. The collar utilises the Thomson Seatpost bolt, washer and barrel nut combination that has proven strong over the years. This fastener combination allows float on both sides of the collar slot ensuring consistent clamping force. The bolt hole angle, height of the collar and offset slot all help create a collar that generates maximum clamping force at only 25-inch pounds of fastener torque. The Thomson Seatpost Collar is made from the same 7000 series alloy as our seatposts and stems, giving you the high performance and long life, you expect from a Thomson.7000 series AluminiumBolt, Washer, and Barrel Nut fastening combinationAvailable in 28.6mm, 29.8mm, 31.8mm, 34.9mm and 36.4mm diameters
The Thomson Seatpost Collar has several features that make it distinct. The collar utilises the Thomson Seatpost bolt, washer and barrel nut combination that has proven strong over the years. This fastener combination allows float on both sides of the collar slot ensuring consistent clamping force. The bolt hole angle, height of the collar and offset slot all help create a collar that generates maximum clamping force at only 25-inch pounds of fastener torque. The Thomson Seatpost Collar is made from the same 7000 series alloy as our seatposts and stems, giving you the high performance and long life, you expect from a Thomson.7000 series AluminiumBolt, Washer, and Barrel Nut fastening combinationAvailable in 28.6mm, 29.8mm, 31.8mm, 34.9mm and 36.4mm diameters
The Thomson Seatpost Collar has several features that make it distinct. The collar utilises the Thomson Seatpost bolt, washer and barrel nut combination that has proven strong over the years. This fastener combination allows float on both sides of the collar slot ensuring consistent clamping force. The bolt hole angle, height of the collar and offset slot all help create a collar that generates maximum clamping force at only 25-inch pounds of fastener torque. The Thomson Seatpost Collar is made from the same 7000 series alloy as our seatposts and stems, giving you the high performance and long life, you expect from a Thomson.7000 series AluminiumBolt, Washer, and Barrel Nut fastening combinationAvailable in 28.6mm, 29.8mm, 31.8mm, 34.9mm and 36.4mm diameters
The Thomson Seatpost Collar has several features that make it distinct. The collar utilises the Thomson Seatpost bolt, washer and barrel nut combination that has proven strong over the years. This fastener combination allows float on both sides of the collar slot ensuring consistent clamping force. The bolt hole angle, height of the collar and offset slot all help create a collar that generates maximum clamping force at only 25-inch pounds of fastener torque. The Thomson Seatpost Collar is made from the same 7000 series alloy as our seatposts and stems, giving you the high performance and long life, you expect from a Thomson.7000 series AluminiumBolt, Washer, and Barrel Nut fastening combinationAvailable in 28.6mm, 29.8mm, 31.8mm, 34.9mm and 36.4mm diameters
Too many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness.Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBLeader in strength and stiffnessPrecise steering, tracking and more riding controlTraditional, knee friendly steerer clampOne piece 7000 series AluminiumMachined by Thomson, in Macon, GeorgiaThe Thomson X4 stem allows you to realize the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design. The Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently.The stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It s built and tested to the same standards as aerospace parts and it s the best stem for all-around mountain bike and cyclocross riding.
The Thomson X4 is the leader in strength and stiffness. The Thomson X4 stem allows you to realize the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.Leader in strength and stiffnessPrecise steering, tracking and more riding controlTraditional, knee friendly steerer clampOne piece 7000 series AluminiumMachined by Thomson, in Macon, GeorgiaAvailable from 70mm to 130mm lengthsCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBThe Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently. The stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It s built and tested to the same standards as aerospace parts.
The Thomson X4 is the leader in strength and stiffness. The Thomson X4 stem allows you to realize the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.Leader in strength and stiffnessPrecise steering, tracking and more riding controlTraditional, knee friendly steerer clampOne piece 7000 series AluminiumMachined by Thomson, in Macon, GeorgiaAvailable from 70mm to 130mm lengthsCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBThe Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently. The stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It s built and tested to the same standards as aerospace parts.
The Thomson X4 is the leader in strength and stiffness. The Thomson X4 stem allows you to realize the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.Leader in strength and stiffnessPrecise steering, tracking and more riding controlTraditional, knee friendly steerer clampOne piece 7000 series AluminiumMachined by Thomson, in Macon, GeorgiaAvailable from 70mm to 130mm lengthsCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBThe Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently. The stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It s built and tested to the same standards as aerospace parts.
The Thomson X4 is the leader in strength and stiffness. The Thomson X4 stem allows you to realize the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.Leader in strength and stiffnessPrecise steering, tracking and more riding controlTraditional, knee friendly steerer clampOne piece 7000 series AluminiumMachined by Thomson, in Macon, GeorgiaAvailable from 70mm to 130mm lengthsCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBThe Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently. The stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It s built and tested to the same standards as aerospace parts.
The Thomson X4 is the leader in strength and stiffness. The Thomson X4 stem allows you to realize the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.Leader in strength and stiffnessPrecise steering, tracking and more riding controlTraditional, knee friendly steerer clampOne piece 7000 series AluminiumMachined by Thomson, in Macon, GeorgiaAvailable from 70mm to 130mm lengthsCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBThe Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently. The stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It s built and tested to the same standards as aerospace parts.