Cant decide between a portable pump or a floor pump If so then why not buy a Topeak Morph pump that combines the two. The award winning Morph series combines the lightweight of a portable pump with convenience and efficiency of a floor pump. The folding foot support and flexible hose easily converts the frame pump into a roadside floor pump allowing you to easily inflate the tyre whilst the easy to read, top mounted flip-out analog gauge ensures perfect inflation every time.Folding Foot Support And Flexible HoseEasily Converts Frame Pump Into A Roadside Floor PumpPadded T-HandleAluminium Barrel For Long LifeConverts Between Presta & SchraderFrame Mount Bracket IncludedPrecise Gauge - Easy To Read Up To 160psiDimensions: 32.2 x 5.8 x 3cmApprox. Weight: 280g
The Topeak TubiBooster X is an aluminium air chamber with inflator head that stores an air charge of one litre, up to 200 psi / 14 bar. Works with a floor pump to quickly fill your tyres and ensures proper installation on a tubeless rim at home. Once you flip the selector from CHARGE to INFLATE mode, air bypasses the chamber as you use the floor pump to inflate your tyre to the perfect pressure. An integrated flexible hose with pump head works with Presta and Schrader valves and takes stress off the valve stem while pumping.Utilizes standard pump to fill air into air chamber to seat and inflate tubeless tiresSwitch the selector to change between Charge and Inflate modes
The Topeak CO2-Bra Inflator is the ultimate CO2 cartridge inflator for road or MTB bike riders who like to travel light and fast. The inflator is easy to use thanks to the green indicator that shows when the cartridge is not punctured and the red indicator that shows when the cartridge is punctured and ready to use. The safety ring prevents accidental discharge in transport so you wont waste any cartridges and it stores in the handle when the inflator is in use. The inflator comes with a centerline mount bracket for easy attachment.Fits Presta And Schrader ValvesIntegrated Dust Cap Protects The Inflation HeadIncludes Threaded 16g CO2 CartridgeDimensions: 7.5 x 4.3 x 4.8cmApprox. Weight: 68g (W/O Cartridge)
The Dualie features a clever dual gauge design to cater for low pressure fat bike tyres and medium pressure mountain bike tyres. The oversized barrel is 1.5 times larger than a standard floor pump and delivers high air volume to fill oversize tyres quickly and efficiently. The lower 30PSI gauge shows precise pressures for fat bike tyres and while the higher 75PSI gauge allows the same for lower volume, higher pressure mountain bike tyres. The Dualie is a great addition to the Topeak range and caters for the fat bike market with traditional Topeak style, quality and performance. Dual Analog Gauge Design30/75PSI Gauges For Fat Bike/Mountain Bike TyresSteel BarrelComposite BaseX-Long Hose With TwinHead Built In Air Release Button Approx. Weight: 1.9kg
The JoeBlow Pro Digital Pump has an easy-to-read top-mounted digital gauge with rubber bumper impact protection delivers accurate tire pressure readings up to 200psi / 14bar. The large padded handle provides comfort while the wide steel base keeps everything stable. The extra-long hose can even reach bikes mounted in a work stand. The SmartHead DX3 automatically adjusts to fit Presta or Schrader valves and a new lower profile air release button allows fine tuning of tire pressure while preventing unintended pressure release.Easy-to-read, super-accurate digital gauge displays pressure to 200 psi / 14 barSmartHead DX3 w/ low profile air release button for fine tuning tire pressureWide steel base provides stability
The Topeak Joe Blow Tubi 2Stage Floor Pump is a new approach to tubeless tyre installation. The innovative Tubi-Head removes the Presta valve core before inflation which allows high air flow to rapidly seat and inflate tubeless tyres with no pressure loss or messy sealant leaks. The 2Stage pump design delivers high pressure or high volume with a flip of the switch to quickly fill any size tyre.Stage 1 opens both barrels for huge air volume, reaching 30 psi with 30% less effort.Stage 2 utilizes the small barrel for high pressure up to 160psi.The accurate dual scale gauge delivers precise readings from low pressure MTB and Fat Bike tyres to high pressure Road bike tyres all from the same pump.Painted steel / Anodized aluminium barrel and durable steel baseOversized, padded handleTubi-Head connector for Presta and Schrader (with included adaptor) valvesSelector for high-pressure or high volumeExtra-long hose160psi analogue 2stage gaugeAir pressure release buttonVolume per stroke: 715cc (stage 1), 258cc (stage 2)Height: 740mm
Take charge of the night! The Topeak HeadLux 100 USB features convenient cable-free charging with a direct USB port plug. Two super bright 0.5W white LEDs provide up to 100 lumens with three light modes. Bi-directional tool-free mounting and removal is accomplished by a single silicone strap, making it suitable for mounting to handlebars, forks or helmets. Great as an urban "be seen" light, or as a secondary, back up unit. Simple to use and a great value.Max 100 lumens outputIPX6 water / dust rating69 x 43 x 22mm32 gramsCharging / low battery indicator3 modes (Burn time): Constant High (1.5hr) Constant Medium (3.3hr) Blinking (40hr)
The Topeak Mountain TT Twin Turbo Pump quickly fills MTB tyres with it s large volume barrel, but also easily reaches higher pressures thanks to Twin Turbo technology which uses both strokes to compress air to deliver high pressure output saving time and effort. Aluminium barrelSide mount bracket includedPresta/Schrader/Dunlop compatible head with integrated dust capSize: 22 x 5 x 4cmWeight: 192g without gaugeInflating up to 60psi the Mountain TT Twin Turbo pump features an aluminium barrel, thumb lock and Presta/Schrader/Dunlop compatible head with integrated dust cap. Includes side mount bracket and is available with or without pressure gauge.
A compact shock pump with easy-to-read digital gauge delivering accurate pressure readings up to 300psi. The Pressure-Rite connector and air release button make dialling in your pressure quick and easy, and there is no pressure loss when removing the connector while the rotating hose take stress off the valve stem when inflating.Pressure-Rite valveAluminium barrel300 psi / 20.7 bar digital gaugeAir bleed button for precise pressure settingDual density polymer handleFlexible rotating hose1x CR2032 Battery (included)25.8x4.5x3cm
PocketShock DXG s big brother! A precision fork and shock pump with an extended barrel for quick inflation and an easy-to-read dial gauge for accurate pressure readings up to 360 psi / 25 bar. An air release button and Pressure-Rite connector makes setting proper pressure easy and eliminates air loss when disconnecting, while the flexible hose takes stress off the valve stem when pumping.Extended barrel to reach desired pressure quickly and easilyEasy-to-read dial gaugePressure-Rite connector makes setting proper pressure easy and eliminates air loss when disconnectingAir release button allows fine tuning pressureFlexible hose takes stress off the valve stem when pumping
The Topeak Road Masterblaster is a modern take on the classic frame-fit pump. Long machine-cut aluminium barrel inflates road tyres quickly and comes in 4 sizes to fit most road bike frames.Durable aluminium thumb lockMachine cut, sleek aluminium barrel; durable and lightweightInflates to 160psiS - Frame size 43-49cm (17.1x1.7x1.2'')M - Frame size 49-54cm (19x1.7x1.2'')L - Frame size 54-59cm (21.1x1.7x1.2'')
The Topeak Road Masterblaster is a modern take on the classic frame-fit pump. Long machine-cut aluminium barrel inflates road tyres quickly and comes in 4 sizes to fit most road bike frames.Durable aluminium thumb lockMachine cut, sleek aluminium barrel; durable and lightweightInflates to 160psiS - Frame size 43-49cm (17.1x1.7x1.2'')M - Frame size 49-54cm (19x1.7x1.2'')L - Frame size 54-59cm (21.1x1.7x1.2'')
One of the smallest pumps in the range the Topeak Race Rocket is an efficient, lightweight, single action design which inflates to 120psi. Featuring a CNC aluminium barrel and handle with sculpted rubber grip for extra comfort, smarthead Threadlock with integral dust cap and extendable hose that takes stress off the valve stem when pumping. The pump comes with a side mount bracket although it is small enough and light enough to fit in your jersey pocket.CNC aluminium barrel & aluminium handleDimensions: 18 x 3.6 x 2.5cmWeight: 85g
An all aluminium mountain pump, this is the fattest version in the Race Rocket range. Designed with an increased barrel diameter to push more air per stroke filling is efficient and smooth allowing you to inflate the tyre up to 90 psi with ease. Like all pumps in the range it comes with an extending flexible hose that takes stress off the valve stem whilst inflating the tyre and the SmartHead ThreadLock hose head accepts Presta and Schrader valves without the need to change internal parts. Compact in size it easily fits in a jersey pocket or saddle bag and with a low weight of only 114g the Race Rocket MT is never a burden to carry into the backwoods.CNC Aluminium barrel & handleDimensions: 19.6 x 3.7 x 3.3cmWeight: 114g
An all aluminium mountain pump, this is the fattest version in the Race Rocket range. Designed with an increased barrel diameter to push more air per stroke filling is efficient and smooth allowing you to inflate the tyre up to 90 psi with ease. Like all pumps in the range it comes with an extending flexible hose that takes stress off the valve stem whilst inflating the tyre and the SmartHead ThreadLock hose head accepts Presta and Schrader valves without the need to change internal parts. Compact in size it easily fits in a jersey pocket or saddle bag and with a low weight of only 114g the Race Rocket MT is never a burden to carry into the backwoods.CNC Aluminium barrel & handleDimensions: 19.6 x 3.7 x 3.3cmWeight: 114g
An all aluminium mountain pump, this is the fattest version in the Race Rocket range. Designed with an increased barrel diameter to push more air per stroke filling is efficient and smooth allowing you to inflate the tyre up to 90 psi with ease. Like all pumps in the range it comes with an extending flexible hose that takes stress off the valve stem whilst inflating the tyre and the SmartHead ThreadLock hose head accepts Presta and Schrader valves without the need to change internal parts. Compact in size it easily fits in a jersey pocket or saddle bag and with a low weight of only 114g the Race Rocket MT is never a burden to carry into the backwoods.CNC Aluminium barrel & handleDimensions: 19.6 x 3.7 x 3.3cmWeight: 114g
The Roadie TT Twin Turbo is a full metal, pocket sized mini pump that transfers larger air volume from a bigger diameter outer chamber into a smaller diameter inner chamber to deliver more air at higher pressures to fill tyres 50% faster and easier. Integrated dust cap keeps pump head clean and thumb lock lever ensures an air-tight seal.TT TwinTurbo Technology: Larger volume outer barrel compresses huge amounts of air into a smaller diameter inner barrel to deliver more air and higher pressure with less strokes.Presta head with aluminium thumb lock lever ensures air-tight sealSide mount bracket includedHEAD: Presta with integrated dust capBARREL / THUMB LOCK / HANDLE: AluminiumCAPACITY: 160 psi / 11 barVOLUME PER STROKE: 41.4 ccADDED FEATURES: Side mount bracketSIZE: 19.5 x 3.3 x 2.35 cm / 7.7 x 1.3 x 0.9 WEIGHT: 100 g / 3.53 oz
This mini sized gauge can be attached between the pump and valve to read pressures while pumping or used alone. Provides pressure readings up to 160 psi / 11 bar. Rotating gauge is easy to read and the head works with Presta, Schrader or Dunlop* valves on bikes / motorcycles / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. An air release button allows fine tuning of pressure.Works as a tyre pressure measurement gauge. 360-degree rotating gauge is easy to read at any angleIntegrated with a pump to inflate tires and tire pressure measurementAir release button for fine tuning tire pressure
A compact and economical version of the Swing-Up bike holder. Includes all mounting hardware plus a moulded rear wheel pad to prevent tyre marks on the wall. Fits standard road and MTB bikes up to 29 wheels.Includes all mounting hardware plus a moulded rear wheel pad to prevent tyre marks on the wall.Fits standard road and MTB bikes up to 29 wheels.Compatible with wheel/tyre combinations having an overall height of 80mm or less and width of 66mm or less Steel & engineering grade plastic constructionArticulated design35lb weight limit22.7x7.5x5.3cm950g
Super strong, lightweight tubular rack designed specifically for 29er's. Perfect for touring or commuting the rack Features QuickTrack technology which makes the mounting of any QuickTrack equipped bag or basket incredibly easy. The rack comes with a RedLite mount for attaching a RedLite series light and tail light mount for attaching other rear lights.Fits All 29" Wheel BikesMTX QuickTrack Compatible With MTX TrunkBags / MTX Rear Baskets6061 T-6 Hollow AluminiumSecure 4-Point FixingRear Light BracketLoad Capacity 25kg / 55lbs