Stans No Tubes Presta-Schrader Valve AdapterThis Presta to Schrader value adaptor from Stans No Tubes, helps you add air with a standard air chuck, whenever your tyres need a little extra. Features:Fitted with an O ringPresta to Schrader adaptorBuy Stans No Tubes Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stans No Tubes Presta Removable Valve CoreThis Core is needed for Stans rim strips with Presta removable valve cores. Features: This is the only core that can be used with the Stans Presta valve stem rim stripsBuy Stans No Tubes Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Unlike other tyre sealants, Stan's No Tubes Tyre Sealant is a very thin, low viscosity liquid that coats the inside of the tyre and carries with it specially formulated sealing crystals. The low viscous nature allows the sealant to quickly reach the puncture site and the crystals aid in sealing large holes, something that thicker or foaming style sealants cannot claim. Stan's Tyre Sealant will stay liquid in a mountain bike tyre with a thin casing for 2-7 months on average. Riding in arid climates or storing the bike in a hot area will require more frequent monitoring of sealant levels. Special anti-freeze agents allow the sealant to be used in environments as cold as 28° C (-20° F). Stan's No Tubes Tyre Sealant is an award winning solution from the folks that invented tubeless conversion and redefined puncture protection. Please read the MBUK's Six of the best guide to tyre sealants.
Stans No Tubes Tyre SealantWith just two ounces of Stan's Tyre Sealant in your standard tubeless tyre set-up, any hole up to 1/4" in size can be repaired. The sealant stays liquid for up to seven months in a mountain bike tyre. Plus, its special anti-freeze agents are used to let it function in environments as cold as -30° F.Features: Riding in arid climates or storing the bike in a hot area will require more frequent monitoring Pre-measured and ready to apply to one bicycle tyre Lasts for 2 to 7 months whilst in a mountain bike tyre Can be used in environments as cold as -30° FUse: Commuter/Touring/Cyclocross/Road/Mountain Bike Buy Stan's No Tubes Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
To install, remove the included valve cap and nut, insert valve through the rim, thread nut on to the valve and tighten by hand.
Stans No Tubes Universal Tubeless Valves (Pair)Weighing half as much as Stan’s brass version, these alloy tubeless valves are the ideal choice to pair up with your tubeless ready Stan’s BST or BST-R mountain bike rims. Also compatible with many other rims on the market, their removable core simplifies the process of setting up your tubeless wheels.Reasons to Buy: Lightweight. Easy setup.Features: Pack of two Removable core for easy inflation Includes cap and nut Weight: (each) 35mm: 8g; 44mm: 9g; 55mm: 10gFits Most Tubeless Wheels/Rims, including: Stan's NOTUBES ZTR rims &wheels Sun-Ringle wheels featuring NOTUBES BST WTB TCS rims & wheels UST wheels including crankbrothers, Fulcrum, Mavic, Shimano Bontrager Tubeless Ready rims & wheels with Bontrager's Tubeless Ready rim stripInstallation:Remove included valve cap and nut, insert valve through rim, thread nut on to valve and tighten by hand.Buy Stans No Tubes Joe's Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stans No Tubes Valve Core RemoverEasily remove Presta and Schrader valve cores with this Valve Core Remover from Stans No Tubes. Made from CNC 6061 aluminium and featuring an anodized finish, it slots in between spokes for seamless core removal without the hassle. Features:Use: Commuter, Touring, Cyclocross, Road, Mountain BikeUse in conjunction with their Sealant Injector or 2-ounce refill bottleHigh-quality tool is fully CNC 6061 aluminium, red anodised, and features a laser etchedKnurled end for a non-slip gripAnodized finishLaser-etched logoWeight: 10.5gBuy Stan's No Tubes Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Can be used to remove the valve core from any schrader valve or from our removable core presta valves.
This rim strip will fit most downhill rims measuring 36mm to 39mm wide. Moulded rim strips are equipped with 32mm removable core Schrader valve stems.
Stans No Tubes Downhill Rim StripThis rim strip will fit most downhill rims measuring 36mm to 39mm wide. Moulded rim strips are equipped with 32mm removable core schrader valve stems.Suitable for but not limited to: Mavic: EX729 Sun: Double Wide WTB: Laser Disc DHDimensions: 52"x38mmBuy Stans No Tubes Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
A MUST HAVE for easy tyre sealant application and tyre sealant recycling! Makes application of tyre sealant quick and easy. Minimizes waste and mess of tyre sealant. Allows you to measure the amount injected into each tyre. Can be used to draw tyre sealant out of a tyre and re-inject into a new tyre. Saving from waste of tyre sealant when switching to new tyres.FEATURES: • Makes application of sealant quick and easy • Minimizes waste and mess of sealant • Allows you to measure the amount injected into each tyre • Allows transfer of sealant to new tyre without waste or mess • Can be used over and over
Stans No Tubes The InjectorThe Injector is Stans no tubes way of imputing sealant into your tubeless wheel as clean and as easy as possible. Designed to work with Presta and Schrader valves with a syringe capacity suited for both MTB and Road.Features:Easy applicationCompatible with Schrader and Presta ValvesReusable 20z SyringeValve core must be removedDiminishes messMeasurable injectionTyre sealant application
Stans No Tubes Flow Rim StripThis rim strip features a removable valve core which allows for easier application of Stan's tyre sealant.Suitable For: ZTR Flow ZTR Flow 29er Bontrager Rhythm Bontrager Duster 2011 Giant S-XC 29 rimsDimensions: 65"x25mmBuy Stans No Tubes Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stans No Tubes Threaded Presta Valve ExtendersThese Stan's No Tubes Threaded Valve Extenders are for use with removable valve core presta valves. They allow deep section rims to be converted to tubeless by way of external threads for securing the presta nut. Features:CNC machined aluminium valve extension, 2 grams eachRubber O-ring seals inside the valve to eliminate leaksAdds 40mm of length to any removable core presta valveCan be used with our Road Tubeless ValveCan be used with any removable core presta tubeSold as a pairRemovable valve cores not includedBuy Stan's No Tubes Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Allows you to use either standard or tubeless tyres. Saving hundreds of pounds and weight over other Tubeless Systems.
Stans No Tubes Universal Road Valve Stem Pair (44mm)This Universal Road Valve Stem Pair from Stans No Tubes is essential for use with Stans rim strips featuring Presta removable valve cores. Installation:Remove included valve cap and nut, insert valve through the rim, thread nut on to the valve and tighten by hand.Features:44mm valve stem with removable valve core for easier inflation.Fits most tubeless road rims.Fits most tubeless rims.Stan’s NoTubes ZTR rims and wheels.Campagnolo 2-Way Fit wheels.Corima Tubeless wheels.DT Swiss Tricon Tubeless wheelsFulcrum 2-Ways Fit wheelsShimano Tubeless wheelsAmerican Classic wheelsBontrager wheels and rimsDT Swiss wheels and rimsEaston wheels and rimsMavic wheels and rimsShimano wheels and rimsVelocity wheels and rimsZipp wheels and rimsSold in pairs (2 in a pack)Buy Stans No Tubes Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stans No Tubes Universal Tubeless Valves (Pair)Weighing half as much as Stan’s brass version, these alloy tubeless valves are the ideal choice to pair up with your tubeless ready Stan’s BST or BST-R mountain bike rims. Also compatible with many other rims on the market, their removable core simplifies the process of setting up your tubeless wheels.Reasons to Buy: Lightweight. Easy setup.Features: Pack of two Removable core for easy inflation Includes cap and nut Weight: (each) 35mm: 8g; 44mm: 9g; 55mm: 10gFits Most Tubeless Wheels/Rims, including: Stan's NOTUBES ZTR rims &wheels Sun-Ringle wheels featuring NOTUBES BST WTB TCS rims & wheels UST wheels including crankbrothers, Fulcrum, Mavic, Shimano Bontrager Tubeless Ready rims & wheels with Bontrager's Tubeless Ready rim stripInstallation:Remove included valve cap and nut, insert valve through rim, thread nut on to valve and tighten by hand.Buy Stans No Tubes Joe's Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Yellow Sealing Tape 10yd x 1' (9.14m x 25mm)• For ZTR Flow Flow 29er Arch Arch 29er only • Weight Per Rim = 7g• Can do 5 rims with one roll
Just two ounces of Stan’s Tire Sealant in a converted standard tire or a tubeless tire can repair up to a 1/4” hole instantly. One quart will convert up to 16 tires. Use only 2 ounces for most bicycle tires. Stan’s Tire Sealant will stay liquid in a mountain bike tire with a thin casing for two to seven months on average. Riding in arid climates or storing the bike in a hot area will require most frequent monitoring of sealant levels. Special anti-freeze agents allow the sealant to be used in environment as cold as -30 F. First choice of riders around the world for tubeless conversion and flat prevention Seals punctures up to 1/4″ (6.5mm) quickly Stays liquid 2-7 months for long-lasting protection Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) Natural materials safe for the environment Can be injected through valve stems with removable cores compatible with tubes and tubular tires