The All Condition Armadillo Elite is the most flat-resistant tire available. Impressively though it has performance characteristics that far exceed many competitor's race tires. We've given it a tread pattern that offers excellent all-weather traction and newly-sourced materials for the best puncture protection possible. In terms of ride quality our GRIPTON® compound is surpassed by none. It provides low rolling resistance and the ultimate in dry and wet condition traction. Without hyperbole it's the best flat-resistant high-performance tire that we've ever made. Casing: 120 TPI Bead: Foldable Compound: GRIPTON® Flat Protection: Armadillo Elite 700 x 23mm psi 110-125 approximate weight 285g
The S-Works Fast Trak 2Bliss Ready T5/T7 has become synonymous with fast and lightweight tires that are able to handle the most technical courses and the most grueling conditions. This model redefines what was thought possible with a cross-country tread design. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed traction support and stable handling. Adding to this the Fast Trak profile and knob spacing has been optimized for a wide variety of internal rim widths. The S-Works casing is our lightest and most supple construction shaving every gram possible from rotational weight. To top off this premium build the T5/T7 dual compound uses T5 center knobs for minimal rolling resistance and T7 shoulder knobs for extra cornering grip. Casing: 120 TPI lightest and most supple XC race construction Bead: Foldable. Butyl wrapped bead = 2Bliss Ready Compound: GRIPTON® T5/T7 29 x 2.2' PSI 25-50 approximate weight 575g
The Butcher GRID TRAIL 2Bliss Ready T9 features a World-Cup proven aggressive tread design to bite and grip in any condition. Ramped and siped the center tread blocks provide maximum traction and accurate steering. The sawtooth faced shoulder knobs offer a continuous biting edge for railing through corners. Our GRID TRAIL casing is a step up from GRID with more reinforcement delivering better handling at lower pressures—all while increasing pinch flat protection by 15% and puncture protection by 30%. The high-dampening GRIPTON® T9 compound rebounds slowly to grip and stick to the ground for total traction and control. Casing: 60 TPI tough trail construction with additional bead to bead protection for exceptional puncture resistance sidewall stiffness and stability. Bead: Foldable Butyl wrapped bead = 2Bliss Ready Compound: GRIPTON® T9 650 x 2.6' psi 25-40 approximate weight 960g
The all new Rhombus Pro’s aggressive tread is designed for aggressive riding on aggressive trails. With more tire clearance and more capability today’s gravel bikes can take on tougher trails than ever before. Tires are one of the most integral components for a gravel bike’s ride quality and the Rhombus Pro delivers. It provides unmatched traction confident cornering and improved comfort when the gravel road turns to single track. When you’re ready to get rowdy on your gravel bike the Rhombus Pro is the tire for you. Casing: 60 TPI Bead: Folding Compound: Gripton Flat Protection: Endurant 700x42C psi 35-65 approximate weight 575
The S-Works Turbo tire sets the standard for a fast and durable performance tube type race tire. Our all new Gripton T2 center compound is the fastest most efficient compound we have ever developed. T2 is placed in the center of our dual compound for speed and longevity on the straights with T5 compound on the shoulders for incredible grip through the corners. We’ve improved the tire’s puncture protection by 8% with all new hybrid-Kevlar Blackbelt breaker under the tread. Combined with our light and supple casing you’ve not only got improved puncture protection but lighter weight and more flexibility for an incredibly supple and confidence inspiring ride. It all adds up to a S-Works Turbo tube type tire that 4 watts faster per set than the previous S-Works Turbo and that weighs just 200 grams for a 24mm. This is S-Works level speed with a tube. Casing: 120 TPI Bead: Foldable tube type Dual Compound: GRIPTON® T2/T5 Flat Protection: BlackBelt 700 x 24mm psi 100-115 approximate weight 200g 700 x 26mm psi 95-115 approximate weight 220g 700 x 28mm psi 75-95 approximate weight 240g 700 x 30mm psi 65-90 approximate weight 260g
Roll-top waterproof pack bag that will keep your gear clean and dry. Made from waterproof recycled nylon fabric and designed to fit the Specialized/Fjällräven Seatbag Harness (art.no 23242). Valve to release air so contents can be compressed after the bag is closed. Part of the Specialized/Fjällräven series for urban rides and bikepacking adventures. Roll-top closure and taped seams keep water out. Light waterproof fabric in 100% recycled nylon 210D. Air-release valve for easy compression. Note- Do not submerge. 100% polyamide 210D
Whether it’s a picnic in the park or an epic multi-day ride in the mountains we believe good storage equals good adventuring. Enter our versatile and tough Coolcave pannier. A 19-litre open pannier in rigid plastic our Coolcave is perfect for carrying everyday essentials purchases or camping gear on bike commutes or trips in the countryside. Easy to clip on and off so you can take the pannier and its contents with you. Adjustable Isofix mountings allow for secure attachment on most bike racks. 19 L cargo capacity. KlickFix mounting system. Made with 50% recycled plastic. Cargo net included. Compatible with Specialized/Fjällräven Cave Pack Cave Pack Tote and Cave Lid Pack. Dimensions: 420 x 340 x 240mm.
Optimise your efficiency and comfort by fine-tuning your stem angle with this adjustable and economical stem.3D-forged and CNC-machined 6061 aluminium road/MTB-compatible stem4-bolt oversized 31.8mm handlebar interface with relieved faceplateEquipped with top cap and 4-degree 2-degree and 0-degree shimsAvailable in 12-degree 17-degree and 24-degree angles12-degree: 10 position angle range: +/- 8-degree to 16-degree in 2-degree increments17-degree: 10 position angle range +/- 13-degree to 21-degree in 2-degree increments24-degree: 10 position angle range: +/- 20-degree to 28-degree in 2-degree incrementsCompatible with composite handlebars
Specialized Alloy Low Rise HandlebarAlloy 27mm Low Rise MTB BarOversize clamp 31.8mmAvailable in 750 or 780mm widths
Sleek styling cool graphics and youth-oriented sizing make the Shuffle Child LED helmet the perfect choice for your kids—day or night. MIPS-equipped. Integrated LED tail light for increased visibility in in both bright and low-light conditions. Headset SX fit system with child-oriented sizing that's designed for an easy and accurate fit. 4th Dimension Cooling System to optimize ventilation. In-molded shell improves strength and reduces weight. Tri-Fix web splitter for improved comfort and ease of strap adjustments. Reflective webbing for increased visibility in low-light conditions. Stylish youthful designs complement our bike graphics and colors. Patented clip-on visor included.
Sleek and lightweight post with an easy access single bolt head assembly.> 2014 Aluminium> Aluminium single bolt low-profile head assembly with side access> Length: 400mm> Weight: 258g> Finish: gloss/matte black anodised
The new Trail stem is forged and CNC-machined to meet the demands of today's trail riding with a sublime stiffness-to-weight ratio. 3D-forged and CNC-machined 6061 alloy construction. 4-bolt oversized 31.8mm handlebar interface with relieved faceplate. Available in three lengths: 40/50/60mm Compatible with carbon composite handlebars.
For a complete service/rebuild on all 2011-2013 Epic models you will also need bearing kit part number: 9891-5250 2011 Epic Alloy 2011 Epic Alloy 2011 Epic Alloy 29er 2011 Epic Alloy 29er 2011 Epic S-Works 2011 Epic S-Works 2011 Epic S-Works 29er 2011 Epic S-Works 29er 2012 Epic Alloy 2012 Epic Alloy 2012 Epic Alloy 29er 2012 Epic Alloy 29er 2012 Epic S-Works 2012 Epic S-Works 2012 Epic S-Works 29er 2012 Epic S-Works 29er 2013 Epic (all models)
Clean aesthetic comfortable fit and a budget-friendly price—that’s what makes up the Align II. The standout feature of the Align II is the inclusion of the Multi-Directional Impact Protection System (MIPS) a patented technology designed to mitigate against rotational forces transmitted to the brain during certain angled impact scenarios. When including MIPS and earning this Five Star Virginia Tech® Helmet Rating™ we didn’t give up any comfort—the Align II includes the Headset SX dial fit system for easy fit adjustment our 4th Dimension Cooling System for incredible ventilation and an easy one-size fit system. If you’re on the quest for a feature-rich helmet that leaves some jingle jangle in your pocket the Align II is for you. Align II earned the highest 5-Star Virginia Tech® Helmet Rating™ from internationally renowned Virginia Polytechnic Institute and State University. The MIPS system is a low-friction layer that allows a sliding motion of 10 to 15mm in all directions. Studies indicate that this reduces some of the rotational forces transmitted to the brain during angled impacts. Easily-adjustable one-size Headset SX fit system is designed for easy and accurate fit for a wide range of head sizes. Add in a micro-adjustable dial for on-the-fly adjustability and you're ensured an easy secure and accurate fit. 4th Dimension Cooling System optimizes ventilation. In-molded shell improves strength and reduces weight. Reflective decals for increased visibility in low-light conditions.
This part is installed in the following models: model year category model 2018 CAMBER FSR MEN CAMBER FSR MEN 27.5 2018 CAMBER FSR MEN CAMBER FSR MEN 29 2018 CAMBER FSR MEN CAMBER FSR MEN COMP 27.5 2018 CAMBER FSR MEN CAMBER FSR MEN COMP 29 2X 2018 CAMBER FSR MEN CAMBER FSR MEN COMP CARBON 27.5 2018 CAMBER FSR MEN CAMBER FSR MEN COMP CARBON 29 2018 CAMBER FSR MEN CAMBER FSR MEN COMP CARBON 29 2X 2018 CAMBER FSR MEN CAMBER FSR MEN EXPERT CARBON 27.5 2018 CAMBER FSR MEN CAMBER FSR MEN EXPERT CARBON 29 2018 CAMBER FSR MEN CAMBER FSR MEN SW CARBON 29 2018 CAMBER FSR WMN CAMBER FSR WMN 27.5 2018 CAMBER FSR WMN CAMBER FSR WMN COMP 27.5 2018 CAMBER FSR WMN CAMBER FSR WMN COMP CARBON 27.5 2017 CAMBER FSR CAMBER FSR 29 2017 CAMBER FSR CAMBER FSR 650B 2017 CAMBER FSR CAMBER FSR COMP 29 2017 CAMBER FSR CAMBER FSR COMP 650B 2017 CAMBER FSR CAMBER FSR COMP CARBON 29 2017 CAMBER FSR CAMBER FSR COMP CARBON 29 2X 2017 CAMBER FSR CAMBER FSR COMP CARBON 650B 2017 CAMBER FSR CAMBER FSR EXPERT CARBON 29 2017 CAMBER FSR CAMBER FSR PRO CARBON 29 2017 CAMBER FSR CAMBER FSR PRO CARBON 650B 2017 CAMBER FSR CAMBER FSR SW CARBON 29 2017 CAMBER FSR CAMBER FSR SW CARBON 650B 2016 CAMBER FSR CAMBER FSR 29 2016 CAMBER FSR CAMBER FSR 650B 2016 CAMBER FSR CAMBER FSR COMP 29 2016 CAMBER FSR CAMBER FSR COMP 650B 2016 CAMBER FSR CAMBER FSR COMP CARBON 29 2016 CAMBER FSR CAMBER FSR COMP CARBON 650B 2016 CAMBER FSR CAMBER FSR ELITE CARBON 29 2016 CAMBER FSR CAMBER FSR ELITE CARBON 650B 2016 CAMBER FSR CAMBER FSR EXPERT CARBON 29 2016 CAMBER FSR CAMBER FSR EXPERT CARBON 650B 2016 CAMBER FSR CAMBER FSR SW CARBON 29 2016 CAMBER FSR CAMBER FSR SW CARBON 29 MODULES 2016 CAMBER FSR CAMBER FSR SW CARBON 650B 2016 CAMBER FSR CAMBER FSR SW CARBON 650B MODULES
Clean aesthetic comfortable fit and a budget-friendly price—that’s what makes up the Align II. The standout feature of the Align II is the inclusion of the Multi-Directional Impact Protection System (MIPS) a patented technology designed to mitigate against rotational forces transmitted to the brain during certain angled impact scenarios. When including MIPS and earning this Five Star Virginia Tech® Helmet Rating™ we didn’t give up any comfort—the Align II includes the Headset SX dial fit system for easy fit adjustment our 4th Dimension Cooling System for incredible ventilation and an easy one-size fit system. If you’re on the quest for a feature-rich helmet that leaves some jingle jangle in your pocket the Align II is for you. Align II earned the highest 5-Star Virginia Tech® Helmet Rating™ from internationally renowned Virginia Polytechnic Institute and State University. The MIPS system is a low-friction layer that allows a sliding motion of 10 to 15mm in all directions. Studies indicate that this reduces some of the rotational forces transmitted to the brain during angled impacts. Easily-adjustable one-size Headset SX fit system is designed for easy and accurate fit for a wide range of head sizes. Add in a micro-adjustable dial for on-the-fly adjustability and you're ensured an easy secure and accurate fit. 4th Dimension Cooling System optimizes ventilation. In-molded shell improves strength and reduces weight. Reflective decals for increased visibility in low-light conditions.
Clean aesthetic comfortable fit and a budget-friendly price—that’s what makes up the Align II. The standout feature of the Align II is the inclusion of the Multi-Directional Impact Protection System (MIPS) a patented technology designed to mitigate against rotational forces transmitted to the brain during certain angled impact scenarios. In addition the Align II became the only $50 helmet to earn the highest Five Star rating from the independent testing done at the renowned Virginia Polytechnic Institute and State University. When including MIPS and earning this Five Star Virginia Tech® Helmet Rating™ we didn’t give up any comfort—the Align II includes the Headset SX dial fit system for easy fit adjustment our 4th Dimension Cooling System for incredible ventilation and an easy one-size fit system. If you’re on the quest for a feature-rich helmet that leaves some jingle jangle in your pocket the Align II is for you. Align II earned the highest 5-Star Virginia Tech® Helmet Rating™ from internationally renowned Virginia Polytechnic Institute and State University. The MIPS system is a low-friction layer that allows a sliding motion of 10 to 15mm in all directions. Studies indicate that this reduces some of the rotational forces transmitted to the brain during angled impacts. Easily-adjustable one-size Headset SX fit system is designed for easy and accurate fit for a wide range of head sizes. Add in a micro-adjustable dial for on-the-fly adjustability and you're ensured an easy secure and accurate fit. 4th Dimension Cooling System optimizes ventilation. In-molded shell improves strength and reduces weight. Reflective decals for increased visibility in low-light conditions.
Born in the American Midwest gravel riding is one of the fastest–growing styles of cycling. The sense of adventure conquering new challenges and simply experiencing a new style of riding are some of its big selling points but doing so without the proper tires makes the difference between having fun and cursing and hollering on the side of the road. The Pathfinder delivers the versatility that these adventure-laden rides deserve—fast rolling lots of grip and a whole lot of fun. Casing: 120 TPI Bead: Foldable Butyl wrapped bead = 2Bliss Ready Compound: GRIPTON® Flat Protection: Endurant Casing and BlackBelt 650b x 47mm [1.75'] psi 35-65
The latest generation of the World-Cup-proven intermediate tire the Butcher GRID TRAIL 2Bliss Ready receives an entirely new tread pattern. Wider shoulder knobs better support load under hard cornering while the biting edges of the shoulder knobs are moved further inside and the center blocks have been staggered and spaced better for a smoother transition when leaning the bike over. Meanwhile our proprietary GRIPTON® compound improves high frequency damping attaching the tire to the ground better on both small bumps and rough sections. The low frequencies of the rolling tire deflections pass through unfiltered leaving no energy absorbed and keeping speed high. Once you ride the Butcher you'll never want another tire for your gravity excursions. Our new GRID TRAIL casing is stiffer delivering better handling at lower pressures—all while increasing pinch flat protection by 15% and puncture protection by 30%. It's the perfect choice for your gravity excursions—one ride and you'll be hooked. Building on this solid base the high-dampening T9 Gripton compound rebounds slowly to grip and stick to the ground for total traction and control. Casing: 60tpi light yet tough with additional bead to bead protection for exceptional durability sidewall stiffness and stability. Bead: Foldable Butyl wrapped bead = 2Bliss Ready Compound: GRIPTON® T9 27.5/650b x 2.6' psi 25-40 approximate weight 960g 29 x 2.3' psi 25-50 approximate weight 975g 29 x 2.6' psi 20-40 approximate weight 1050g
With the Stix Switch 2-Pack your lighting options are endless. How? The Stix Switch features the ability to switch between red and white modes with a simple long press of the power button. So if you need extra light up front more visibility at the rear or a traditional front/rear combo the Stix Switch 2-Pack delivers. Headlight or taillight—you decide. A 2-pack gives you even more options. Press-and-hold for two seconds to shift between white and red modes. Fresnel lens for maximum visibility in all directions. Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter as well as most seatstays. (Aero strap mount available separately). 340mAh battery recharges via built-in USB tab in two hours (no extra cables needed). White Steady mode: 65 lumens for 2:00 hours White Power Flash mode: 100 lumens for 6:00 hours White Eco Flash mode: 35 lumens for 16:00 hours Red Steady mode: 18 lumens for 2:00 hours Red Surge Glow mode: 16 lumens for 7:00 hours